LicensebyState

Missouri to New Mexico: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 11 sources

Missouri does not issue a statewide residential contractor license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state residential contractor applying for GB-2 (all states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A residential contractor licensed in another state gets no exam waiver and no shortened path to a New Mexico GB-2 license. The only reciprocity the Construction Industries Division publishes is for the EE-98J electrical journeyman certificate, 14.6.3 NMAC contains no endorsement or substantial-equivalence route for a contractor or Qualifying Party, and the NASCLA exam waiver that CID does operate is limited to the GB-98 and EE-98 classifications, not GB-2. What does carry across is the work itself: out-of-state experience counts in full toward the two years (4,000 hours) of foreman-level experience, provided it was gained while employed by a contractor licensed in the trade or was legal work in the state where it was performed, and the out-of-state contractor who signs the notarized affidavit attaches a copy of their own current state license. The applicant files the Qualifying Party application and General Building Work Experience Verification affidavits with PSI, waits for CID or PSI to approve the experience, then passes the GB-2 exam and the Business and Law exam, and the company that will hold the license applies separately with the bond, the tax registration certificate and proof of the Qualifying Party's exams. Statute does let the division enter reciprocal agreements with states having equivalent requirements, but none covering a building classification has been published.

Accredited college, university, manufacturer, vocational or apprenticeship training counts as one-half year of experience per year and may not exceed half of the two-year requirement. Estimating, project management, ordering supplies and supervising do not count as hands-on experience on the affidavit, and the affidavit must state whether the experience was residential or commercial. Once PSI approves the application, every remaining requirement must be met within six months or the fees are forfeited, and the trade exam and the Business and Law exam must both be passed within one year of each other. An exam may not be repeated more than twice in any 30-day period. Military service members, their spouses and dependent children and veterans who are currently licensed and in good standing in another jurisdiction with substantially equivalent requirements have a separate expedited route: CID issues within 30 days and waives the license fees for the first three years. A homeowner-scale exemption exists for an individual doing one project at a time for no more than $7,200 a year in casual or handyman work, but it does not extend to electrical, plumbing or gas fitting and requires an annual declaration to the division.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must document at least 4,000 hours of qualifying work experience.Two years (4,000 hours) of foreman-level practical or related trade experience in residential building, gained within the ten years immediately before application (14.6.6.9(B)(1) NMAC; NMSA 60-13-14(B)(8) as reduced by rule). It is documented on notarized General Building Work Experience Verification affidavits, one per employer or affiant, completed by an employer, supervisor, foreman or other contractor rather than by the applicant.
  • Experience must have been gained while employed by a contractor licensed in the trade being applied for, or be work that was legal in the state where it was performed. An out-of-state contractor certifying the experience attaches a copy of their current state license to the affidavit; where the state does not license that trade, proof that the company was active and valid, such as a tax certificate or corporation papers, is attached instead.
  • The Qualifying Party must be at least 18 and may qualify only one licensed entity unless there is at least thirty percent common ownership between the entities. CID may deny a license or certificate where the applicant or the proposed Qualifying Party has a disqualifying felony conviction, and an applicant denied on that basis may submit written evidence of mitigation or rehabilitation and appeal.

What you'll do to get licensed in New Mexico

  1. 1Application fee. Pay the application fee ($30). Non-refundable Qualifying Party application fee, paid to PSI with the notarized application and work-experience affidavits. Complete packets go to the PSI Albuquerque office by hand or mail; faxed and emailed forms are not accepted..
  2. 2Other. Qualifying Party certificate fee, charged for each classification on the application (14.5.5.14(A) NMAC). With the $30 application fee this is the $36 the Construction Industries Division quotes for a single-classification Qualifying Party filing. ($6).
  3. 3Trade exam. Pass the destination's trade exam. GB-2 Residential Building Contractor exam, administered by PSI once CID or PSI approves the experience affidavits: 80 questions, 225 minutes, open book, 75% (60 points) to pass. Content covers sitework, footings and foundations, concrete and reinforcement, masonry, carpentry, roofing, associated trades, general code, plan reading and estimating, and OSHA safety, against the 2021 New Mexico Residential Building Code (14.7.3 NMAC), the 2021 International Residential Code, the 2021 International Energy Conservation Code and 29 CFR 1926..
  4. 4Exam fee. Pay the exam fee ($134.53). PSI fee for the GB-2 exam, charged for a first attempt or a retake..
  5. 5Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam, required of all new Qualifying Party candidates: 50 questions, 130 minutes, open book, 75% (38 points) to pass, covering licensing requirements, estimating and bidding, business organization and financial management, tax and labor law, project management and lien law, contracts, risk management, and environment and safety. An approved Business and Law course taken with a CID-approved vendor may be completed in place of the exam..
  6. 6Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam..
  7. 7Contractor license. Hold or obtain a contractor license ($30). Non-refundable contractor license application fee paid to PSI by the business, filed with the notarized Contractor License Application, a copy of the Qualifying Party's certificate or passing score reports, and the Business and Law score or course certificate. A $6 certificate fee covering the license certificate and two wallet cards is charged with it..
  8. 8License fee. Pay the license or certificate fee ($300). Classification fee for GB-2, covering the full three-year license term on PSI's current schedule. Adding a GS specialty classification alongside it does not raise the total above $300 for the category. Late renewal costs $1 a day for the first 30 days and the equivalent of one year's fee from 30 to 90 days; after 90 days the license is cancelled and the business must reapply..
  9. 9Surety bond. Post a surety bond ($10,000). $10,000 code bond from a corporate surety authorized to transact business in New Mexico, issued in the exact name shown on the application and effective for the entire three-year license period. It is the statutory proof of responsibility, may be drawn on only to cure division-certified code violations the licensee has not corrected, and must be kept in force for the whole term; claims are limited to two years after final inspection or issuance of a certificate of occupancy..
  10. 10Insurance. Carry the required insurance. Workers' compensation coverage is required of every licensed entity, and failure to maintain it is cause for revocation of the license. A sole proprietor with no employees may be exempt; the Workers' Compensation Administration can confirm. An application is placed on hold while the applicant is out of compliance..
  11. 11Business license. Obtain a business license. A registration certificate issued within the last twelve months by the New Mexico Taxation and Revenue Department in the exact name on the license application, plus proof of registration with the New Mexico Public Regulation Commission for a corporation or LLC, or with the Secretary of State for a limited liability partnership or limited partnership. A corporation, LLC, LP or LLP must be legally authorized to do business in New Mexico before the license issues, and the proposed business name must be cleared with PSI first..
  12. 12Background check. Complete a background check. CID reviews the application against the disqualifying felony convictions listed in 14.6.3.8(F) NMAC and may deny a license or certificate on that basis; sealed, dismissed, expunged or pardoned convictions and juvenile adjudications are not used. An application is also held where there are pending CID disciplinary actions, a workers' compensation compliance problem, a child support delinquency for the proposed Qualifying Party, or an open unlicensed-activity investigation..

Published fees on this path total $533.41, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Exam fee · $134.53
  • Law / code exam
  • Exam fee · $68.88

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $10,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How New Mexico licenses residential contractors

New Mexico residential contractor · “GB-2 Residential Building Contractor

Statewide license

Verified September 17, 2026· 6 sources

Issued by New Mexico Regulation and Licensing Department, Construction Industries Division (CID), General Construction Bureau; licensing paperwork and exams handled by PSI

New Mexico licenses homebuilders statewide through the Construction Industries Division of the Regulation and Licensing Department, and the homes-only classification is GB-2 Residential: erect, alter, repair or demolish residences and apartment houses of not more than four family units in occupancy Groups R-1, R-2 and R-3, plus incidental Group U structures and any GS specialty work kept inside that residential scope. Anything commercial, and any residential building beyond four units, needs the GB-98 General Building classification instead. The license is held by a business, not by a person: CID issues it to a qualified entity that employs or is owned by a Qualifying Party, and the Qualifying Party is the individual who documents the experience, sits the exams and holds a personal, non-transferable certificate of qualification, so a builder moving to New Mexico applies first as a Qualifying Party and then for the company license. A GB-2 Qualifying Party needs two years (4,000 hours) of foreman-level practical or related trade experience gained within the ten years before applying, and must pass the GB-2 trade exam and the Contractor's Business and Law exam, or take an approved Business and Law course in place of that exam. Every licensed entity files a $10,000 code bond and carries workers' compensation coverage, and licenses run for three years. CID publishes reciprocity for one credential only, the EE-98J electrical journeyman certificate, so no other state's contractor license is recognized at this level.

Moving to New MexicoLeaving New Mexico

Why Missouri has nothing to transfer

Missouri residential contractor · “Residential Building Contractor / Class C general contractor / construction business license (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 19 sources

Issued by No state authority; cities and counties license, register or exempt residential contractors

Missouri issues no statewide residential contractor, home builder or remodeler license. The Division of Professional Registration's own list of regulated professions contains exactly one construction trade - Electrical Contractors - and Title XXII of the Revised Statutes, which holds every occupational licensing chapter from 324 to 346, has no chapter for contractors or builders at all. The one statewide construction credential Missouri does offer is the voluntary electrical contractor license under RSMo 324.900 to 324.945, and its own definitions confine it to electrical contracting; there is no building-contractor equivalent, so a residential builder has nothing at state level to apply for or transfer. Plumbers are examined by cities over 15,000 people and by first-classification counties under RSMo chapter 341, again locally rather than by a state board. Housebuilding is therefore regulated jurisdiction by jurisdiction, and Missouri splits sharply in two: Kansas City and Independence run genuine competency programs built on ICC or Prometric examinations, while St. Louis City, St. Louis County, Springfield, Columbia and Jefferson City ask a residential builder for nothing more than a business license and proof of workers' compensation. A contractor moving to Missouri qualifies separately in each place where permits will be pulled, and in the two testing cities the credential that actually travels is a passing score on a recognized national residential-builder examination rather than another state's license.

How local licensing works in Missouri

How it works in Missouri. There is no state contractor board, no state application and no state exam. Each city or county writes its own ordinance, so a builder holds whatever the local jurisdiction requires everywhere it works, and a credential from one Missouri city does not carry into the next of its own force. The single statewide preemption in Missouri construction law is the electrical one: RSMo 324.925 forces every political subdivision to recognize a statewide electrical contractor license and bars it from testing that holder's electrical proficiency. Nothing equivalent exists for builders, and the statute expressly leaves cities free to license and examine in other trades. What that produces is two very different kinds of place. In Kansas City and Independence a residential builder is examined and personally qualified. In St. Louis City, St. Louis County, Springfield, Columbia and Jefferson City the trades are examined and the builder is not - the builder simply buys a business license.

Kansas City. City Planning & Development runs a two-part system under Article XII of the Kansas City Building and Rehabilitation Code, and it is the only place in Missouri with a purpose-built residential builder credential. An individual first earns the Residential Building Supervisor certificate of qualification, which covers "constructing, structurally altering or enlarging any one- or two-family detached dwelling or townhouse including detached accessory buildings in excess of 400 square feet." The applicant files an application with a $60.00 nonrefundable fee and "shall earn a passing score on one of the two recognized exams administered for Kansas City, Missouri: the residential construction (10344) examination administered by Prometric or the standard residential building contractor (W13) examination administered by ICC." The exam is waived where the applicant holds "a passing score on a standard Prometric or ICC examination or other department-approved national testing agency examination comparable in content," documented to the Building Official's satisfaction - and the city states outright that it built the program to match Independence and Johnson County, so "if you have passed a residential builder exam in either of these jurisdictions, you will not be required to retest," and continuing education hours earned there count toward renewal. Being a Missouri-registered engineer or architect does not substitute for the exam. The company then applies for the Residential Building Contractor license, which needs a full-time managerial employee holding the supervisor certificate (the owner may be that person), a business license from the Finance Department, a current Missouri Secretary of State registration and a certificate of insurance carrying at least a $1,000,000 aggregate limit per occurrence and naming the City of Kansas City as additional insured. Fees are $60.00 to apply and $181.00 to issue, with $181.00 quadrennial renewals on both the license and the certificate; the certificate itself is free for its first four years. Applications go through CompassKC; [email protected], (816) 513-1500.

Independence. The city licenses the individual, not the company: "contractor licenses belong to the licensed individual, NOT a company," and "anyone hired to complete permittable work within the City of Independence" needs one. The residential tier is the Class C general contractor license, described as residential only, and the license "covers framing, footings, and general construction." Qualification is one of three things: ICC or Prometric test scores from within the last five years at 75 percent or better; "a current, active license with a jurisdiction that we reciprocate with," which the city defines broadly as "any jurisdiction that issues licenses in a similar fashion"; or, for a general contractor license, a bachelor's degree in engineering, architecture or construction science from an accredited college or university. Licenses expire on December 31 every year with no proration. A business license shows you may trade in the city; the contractor license shows you are qualified to do the work, and you need both. Authorized users may be added to a license, but the holder answers for their work. [email protected], (816) 325-7401.

St. Louis City. The Building Division operates four boards of examiners - electrical, mechanical contractors and pipefitters, plumbers and drainlayers, and sprinkler system contractors - and none of them touches building contractors. A residential builder needs a construction or contracting business license from the License Collector: a state tax number, the application form, clearance from the Collector of Revenue, an occupancy permit from the Building Division, and proof of workers' compensation coverage or a signed statement that the law does not require it. The city also requires that "all general contractors ... furnish a list of the sub-contractors on any job to the License Collector." No exam, experience or bond applies. Building Division, City Hall Room 425, 1200 Market St., (314) 622-3313.

St. Louis County. The county is explicit: "the County does not license general contractors," though it "does verify that out-of-state contractors are registered with the state," and it "does register all repair contractors that obtain permits for repairs from a natural disaster such as a flood or severe storm." What it does license is the trades, through Transportation and Public Works: electrical licensing, mechanical licensing (four contractor categories under the county Mechanical Code) and plumbing licensing, each with its own board, and "the County only issues trade permits to licensed contractors." A homebuilder in unincorporated St. Louis County therefore pulls permits without a county builder credential but must use licensed trade contractors. 41 South Central Ave., 6th Floor, Clayton, 314-615-5184. Note that most of the county's ninety-odd municipalities run their own building departments, so check the city as well.

Springfield. Building Development Services will not issue a permit until "a City-licensed General Contractor (GC) or Trade Master (TM) ... is listed on the permit," so the credential is mandatory - but it is a business license, obtained from the License Division, not a tested qualification. Springfield's testing program covers the crafts only: "electricians, plumbers, gas fitters, and mechanical craftsmen must be tested and certified to afford competence and knowledge of the codes," and those trades may substitute an out-of-jurisdiction exam score of 75 percent or better from Prometric, Experior, Block or ICC where the examination is identical to Springfield's. Contractors who carry workers' compensation file proof of it; those who are not required to carry it sign a notarized exemption statement. Permit desk 417-864-1585, License Division 417-864-1617.

Columbia. Community Development's Building and Site Development division licenses trades only - Trade Apprentice, Electrical Certification, Mechanical Certification and Plumbing Certification - because "electricians, plumbers, gas fitters and mechanical craftsman must be tested and certified," with the tests "administered by a private testing firm according to a regular schedule." There is no builder certification and no board of building examiners. A residential contractor takes out a city business license instead: $0.25 per $1,000 of gross receipts with a $75 annual minimum, a $10,000 annual maximum and a $45 application fee, plus a certificate of workers' compensation insurance for any construction business with one or more employees. Business License Division 573-874-7378.

Jefferson City. "All contractors performing work in Jefferson City must have a local license," but the split is the same as elsewhere: "electrical and plumbing contractors and their employees are required to obtain specific trade licenses directly from the Building Regulations Division," while "all other contractors are directed to the Business License Division to obtain their business license." A residential builder therefore files for the business license and takes no examination. Building Regulations (573) 634-6410, Business License Division (573) 634-6322.

Everywhere else. Missouri's other cities and counties set their own rules, and many require nothing but a permit and proof of insurance. Ask each building department what it licenses before you contract there. If you plan to sit an examination anywhere in Missouri, the practical move is the ICC standard residential building contractor (W13) or the Prometric residential construction (10344) paper, because those are the two Kansas City names outright and the same scores satisfy Independence, and a passing result documented from an approved agency is the nearest thing Missouri has to a transferable builder credential.

Moving to MissouriLeaving Missouri

Common questions

Do I have to take the New Mexico residential contractor exam if I'm licensed in Missouri?
Yes. New Mexico requires the trade exam on this path, plus a law or code exam.
What does it cost to get a New Mexico residential contractor license from Missouri?
Published fees on this path total $533.41, not counting exam vendor fees or bonds.
Do my Missouri work hours count in New Mexico?
Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
Does it work the other way, from New Mexico to Missouri?
Not necessarily. Reciprocity is directed. Going from New Mexico to Missouri, the mechanism is not applicable.

Sources

  1. Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 (RLD compilation as of July 1, 2021) · NMSA 1978 §§ 60-13-3, 60-13-14, 60-13-14.1, 60-13-23, 60-13-49 · New Mexico Regulation and Licensing Department · Statute · verified September 17, 2026
  2. 14.5.5 NMAC - Construction Industries General Provisions: Fees · 14.5.5.8 and 14.5.5.14 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
  3. 14.6.3 NMAC - Construction Industries Licensing: Contractor's License Requirements · 14.6.3.8 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
  4. 14.6.6 NMAC - Construction Industries Licensing: Classifications and Scopes of Work · 14.6.6.8 and 14.6.6.9 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
  5. NM CID - How to Obtain a Contractor License and Contractor License Application (updated October 2023) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
  6. State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 17, 2026
  7. New Mexico Contractor Licensing - Frequently Asked Questions (CID / PSI) · PSI Services for the New Mexico Construction Industries Division · Faq · verified September 17, 2026
  8. PSI General Building Work Experience Verification - New Mexico Contractor Licensing Service · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
  9. New Mexico Licensing Fees (CID contractor, qualifying party and journeyman fee schedule) · PSI Services for the New Mexico Construction Industries Division · Other · verified September 17, 2026
  10. NM CID Qualifying Party Certificate Application and Instructions (instructions updated May 2025, form updated August 2025) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
  11. NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related