LicensebyState

New York to Alabama: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 4 sources

New York does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Unlimited Home Builders License by examination (states with no exemption on the Board's list)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A residential builder arriving from a state that is not on the Board's short exemption list gets no credit for the license held elsewhere. The applicant entity files the notarized application, names its designated qualifying representative, pays the $100 processing fee and the $250 annual license and Recovery Fund fees in one $350 payment, orders a business-related credit report sent straight to the Board by the credit agency, files the entity certificates and proves citizenship or lawful presence. The qualifying representative then takes both Alabama Home Builders exams through Prov: the Skill exam (80 questions, four hours, 66% to pass, based on the 2015 International Residential Code) and the Business and Law exam (40 questions, two hours, 70% to pass). No Board authorization is needed to book the exams and a passing score stays good for three years. Alabama sets no minimum years of building experience, so documented out-of-state work neither shortens nor replaces any step. The Board says a complete file takes roughly three to four weeks and must be complete seven days before the Board meeting that reviews it.

Both Prov examinations are required on this path, and the Business and Law exam is never waived at any level. A license with limitation or limited to roofing skips the examination entirely, but its experience test is a business or occupational license as a contractor issued by an Alabama municipality, township or county, currently held or held within the year before the application, so an out-of-state local license does not open that route; the alternatives are a written recommendation from the holder of an unlimited home builders license in Alabama or any other state, or from a building official in Alabama or any other state. Licenses run for the calendar year and renew by November 30 for the following year, with six hours of continuing education. A general contractor license issued by the other Alabama board does not cover residential construction unless its number is below 18908, which means issued before the Home Builders Licensure Board was created in 1992.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Do not count
Typical processing
About 28 days

What you must already have

  • The Board must be satisfied that the applicant has the experience, ability, good character and willingness to serve the public required by Ala. Code § 34-14A-5. There is no published minimum number of years or hours of residential building experience for an unlimited license.

What you'll do to get licensed in Alabama

  1. 1Trade exam. Pass the destination's trade exam. Alabama HBLB Skill Exam through Prov: 80 questions, 4 hours, 66% to pass, open book against the 2015 International Residential Code and the Residential Home Builder Study Guide, covering plan reading, sitework and foundations, concrete, masonry, carpentry, roofing, interior and exterior finish, associated trades and OSHA. No Board authorization is needed before booking, and a passing score stays valid for three years..
  2. 2Law / code exam. Pass a law, rules, or code exam. Alabama HBLB Business and Law exam through Prov: 40 questions, 2 hours, 70% to pass, open book against the NASCLA Contractors Guide to Business, Law and Project Management, Alabama Residential Construction edition. This exam is never waived..
  3. 3Exam fee. Pay the exam fee ($130). $130 if the Skill and Business and Law exams are taken on the same day, or $80 for each exam taken on separate days. Testing fees are paid directly to Prov, not to the Board..
  4. 4Application fee. Pay the application fee ($100). Non-refundable new license application processing fee (Ala. Admin. Code r. 465-X-4-.04(3)). It is paid together with the annual license fee in a single payment and is not returned if the application is withdrawn or denied..
  5. 5License fee. Pay the license or certificate fee ($250). Annual license fee of $235 plus the $15 annual Homeowners' Recovery Fund fee, sent with the application as one $350 payment together with the $100 processing fee. The license fee is refunded on written request if the application is rejected or denied. A license limited to residential roofing costs $150 a year and pays no Recovery Fund fee. Cheque or money order only; the Board does not take cash or credit cards..
  6. 6Financial responsibility. Show financial responsibility. Business-related credit report including a public records search, ordered by the applicant at a fee of $35 and sent to the Board directly by the credit reporting agency. There is no net worth or working capital minimum, but outstanding business-related collection or foreclosure accounts must not exceed $500 in total, and outstanding judgments, judgment liens or perfected liens must not exceed $500 in total ($1,000 where the matter is under dispute or on appeal), unless the applicant documents payment, a payment plan or the circumstances to the Board's satisfaction. An application pending more than 90 days may need an updated report..
  7. 7Business license. Obtain a business license. The license is issued to the legal entity that will contract. A corporation, limited liability company or limited partnership files a Certificate of Compliance from the Alabama Department of Revenue, and an entity organized outside Alabama also files a Certificate of Existence from the Alabama Secretary of State. Conducting residential homebuilding through an entity that does not itself hold an Alabama Home Builders license is a violation of the Act..
  8. 8Surety bond. Post a surety bond ($10,000) (if applicable). Required only for a license limited to residential roofing: a surety bond of not less than $10,000 naming the Home Builders Licensure Board as obligee, valid through December 31 of the licensure year and submitted to the Board directly by the surety (Ala. Admin. Code r. 465-X-3-.04(5)). Roofers file this instead of a credit report. Unlimited and limited licenses require no bond..
  9. 9Insurance. Carry the required insurance (if applicable). The Board states that the law regulating residential home builders does not address insurance, so no policy is required for licensure. Other Alabama laws, and most lenders and homeowners, still expect general liability and workers compensation coverage; the Alabama Department of Labor answers questions about workers compensation..
  10. 10Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: six credit hours of Board-approved continuing education each year, two of them in Alabama-specific subjects, taken by the designated qualifying representative where the license is held by an entity. Licenses run for the calendar year and renewal applications are due by November 30 of the preceding year (Ala. Admin. Code r. 465-X-3-.06)..
  11. 11Other. Notarised application on the Board's form (no photocopies), notarized corporate minutes or equivalent naming the designated qualifying representative as an officer, general partner, member or manager, and proof of United States citizenship or lawful presence for every applicant..

Published fees on this path total $480, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Law / code exam
  • Exam fee · $130

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $10,000 · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · if applicable

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

How Alabama licenses residential contractors

Alabama residential contractor · “Residential Home Builders License (without limitation, with limitation, or limited to residential roofing)

Statewide license

Verified September 17, 2026· 4 sources

Issued by Alabama Home Builders Licensure Board

Alabama licenses residential builders statewide through the Home Builders Licensure Board in Montgomery, which is a different agency from the Alabama Licensing Board for General Contractors that handles commercial work. A license is required to construct, remodel, repair or improve a residential structure where the cost of the undertaking including labor and materials exceeds $10,000. There are three tiers: a license without limitation (unlimited), which covers whole houses, work involving more than one trade and residential roofing; a license with limitation (limited), for single-trade work that is not a whole residence; and a license limited to residential roofing. The license is held by the business, not the person: an individual may be licensed personally, but a partnership, corporation, LLC or non-profit must name a designated qualifying representative who is a general partner, officer, member or manager and who personally meets the experience and examination requirements, so an inbound builder applies as or for the entity that will sign contracts. An unlimited license is earned by passing the Alabama Home Builders Skill exam and the Business and Law exam through Prov and by showing business-related financial responsibility through a credit report; Alabama sets no minimum years of experience. The Board publishes one reciprocity rule, naming five states whose residential licensees may skip the Skill exam.

Moving to AlabamaLeaving Alabama

Why New York has nothing to transfer

New York residential contractor · “Home Improvement Contractor license (municipal; title and scope vary by jurisdiction)

Licensed by cities and counties

Verified September 17, 2026· 16 sources

Issued by New York City, county and city consumer-protection departments (no statewide residential contractor license)

New York issues no statewide residential contractor, home improvement contractor or home builder license. The Department of State's Division of Licensing Services regulates 35 occupations — real estate brokers and salespersons, appraisers, home inspectors, manufactured housing, security and fire alarm installers, cosmetology and the like — and contractor is not among them. The only statewide law that reaches a residential contractor is General Business Law Article 36-A, which governs home improvement contracts rather than licenses: it requires a signed written contract, requires customer deposits taken before substantial completion to be held in escrow or covered by a bond, and asks the contract to state the contractor's "license number, if applicable" — the words "if applicable" are there precisely because the license, where one exists, comes from a county or a city. New York is one of the most fragmented licensing states in the country. New York City licenses home improvement contractors through the Department of Consumer and Worker Protection; Nassau, Suffolk, Westchester, Rockland and Putnam counties each run their own program; and cities including Yonkers and Buffalo license on top of or instead of the county. These licenses are held by the business and qualified by a named owner, officer or principal, so the reader is applying for a company license in their own name as the responsible individual. An out-of-state residential contractor has no state license to transfer and no state reciprocity to apply for, but a license already held elsewhere is not worthless: several New York jurisdictions accept it as evidence of qualifying experience.

How local licensing works in New York

How it works in New York. There is no state license, no state application and no state exam for residential contractors. A contractor must be licensed in every jurisdiction where the work is performed, and the licenses are not interchangeable — a Nassau County license does not authorize work in Suffolk, and a Westchester County license does not by itself authorize work in Yonkers. Almost every program licenses the business and requires one named owner, officer, principal or member to stand behind it, so budget for one application per county or city rather than one per person. Nothing in these programs is a state-to-state agreement, and none of them waives anything because of a license held in another state.

New York City — the one that matters most. The Department of Consumer and Worker Protection (DCWP) Home Improvement Contractor license is the single most consequential residential credential in the state: "A person or business must have a Home Improvement Contractor license to do construction, repair, remodeling, or other home improvement work to any residential land or building in New York City", including basements, driveways, fences, garages, landscaping, patios and swimming pools. One person — the sole proprietor, a general partner, a corporate officer, principal, director, member, or a shareholder owning 10% or more of the stock — must pass the Home Improvement Exam: 30 questions, at least 21 correct to pass, booked with ExamBuilder and sat at test centers open 9:00 a.m. to 5:00 p.m. seven days a week across the city, within 60 days of filing. The exam is included in the application fee for up to two attempts, and $50 buys two more. The applicant must either enroll in the Home Improvement Business Trust Fund for $200 or post a $20,000 surety bond, and must file a workers' compensation certificate naming DCWP at 42 Broadway, New York, NY 10004, or a CE-200 exemption. The license runs two years and expires on February 28 of odd years, so the fee is pro-rated by filing date: $200 from 1 March to 31 August of an odd year, $150 from 1 September of an odd year to the end of February, $100 from 1 March to 31 August of an even year, and $50 or $250 from 1 September of an even year depending on the term chosen. There is no experience requirement and no requirement that the business already be in New York.

Nassau County. The Department of Consumer Affairs runs the most demanding program in the state and the one that most rewards an out-of-state license. One owner, officer or principal "must have at least 5 years of recent, relevant verifiable experience in the home improvement field", proved by "five years of W2's, 1099's, or a license in another municipality". A new two-year license is $650, plus a separate one-time $50 payment into the Restitution Fund, $110 for each additional location and $60 to replace a lost license; every applicant also submits to a one-time fingerprint-based background check costing about $90. Liability insurance must show bodily injury limits of $250,000/$500,000 and property damage of $100,000 with the department at 240 Old Country Road, Mineola as certificate holder. At least one principal needs EPA RRP lead-safety certification where lead paint may be disturbed; irrigation work needs a New York backflow tester certification; pool and spa work needs five years' experience plus a CBP, CST, CSP or CMS certification. Out-of-state businesses face an extra hurdle: "you must provide a Certificate of Authority to do business in NY State, have a NY State location, as well as an authorized contact person that has a NYS residence." A judgment and open-complaint search is run on every principal, and all subcontractors except plumbers and electricians must hold their own Nassau license. There is no written exam. (516) 571-2600.

Suffolk County. Licensing sits with the Department of Labor, Licensing and Consumer Affairs under Chapter 563 of the county code, and home improvement licenses are more than half of everything the county issues. "Home improvement contracting" is defined broadly — carpentry, fencing, driveways, flooring, HVAC ductwork, masonry, roofing, siding, pools and spas, waterproofing, landscaping and tree work — but it expressly excludes electrical and plumbing work and "the construction of a new home". The fee is a $200 application fee plus $200 per annum for the license itself, the term is two years, and each salesperson needs a $50-per-year identification card. The Director may require a surety bond "in an amount to be set by the Director, but in no event to exceed $100,000" and sets the liability insurance figure. There is no general trade exam, but pool and spa builders need an APSP Certified Building Professional certification plus two years' experience, pool and spa service contractors need a CST, CSP or CBP plus two years, and renewing pool contractors need six hours of continuing education. (631) 853-4600.

Westchester County. "Westchester law requires that home improvement contractors have a county license." The fee is $750 for the two-year term as of January 1, 2026, with $100 for expedited handling, $50 for late renewal, $10 per vehicle decal and $50 for a replacement certificate. Processing normally takes about 60 business days, or seven business days if expedited. The packet is documentary rather than examined: notarized application, proof of business name from wherever the company is based, liability insurance naming the department at 148 Martine Avenue, Room 407, White Plains as certificate holder, workers' compensation and disability certificates (or a CE-200), photo ID for every owner, officer, member, partner, manager and salesperson, and a notarized child support certification from sole proprietors and partners. The application asks directly whether the company is "licensed in any other jurisdiction" and for those license numbers. A bond or cash security of up to $50,000 may be required at the Director's discretion, at application or later. The county law does not apply to plumbing, electrical or architectural work, to work within a state-licensed occupation, or to "the construction of a new home building". The cover letter warns that "the CITY OF YONKERS has additional licensing requirements". (914) 995-2155.

Yonkers. Inside Westchester County, Yonkers licenses separately through its Consumer Protection Bureau, and a contractor renovating existing one- to three-family dwellings in the city needs both. The Yonkers Home Improvement License costs $400, is non-refundable, runs two years and is not transferable. The packet requires a notarized application signed by an owner, partner or officer, vehicle registrations with automobile insurance (bumper stickers are issued for three vehicles, $10 for each additional one, and at least one vehicle must be listed), a DMV driver's license or non-driver ID, a $500,000 general contractor liability certificate naming the Office of Licensing/Consumer Protection, a workers' compensation certificate or CE-200, proof of business name, a NYS Certificate of Authority if the company charges sales tax, and a completed Work History Form. A background check is run on both the applicant and the business. Vehicles must display the business name, address and phone in eight-inch permanent letters or on a 2x3 foot sign. 914-377-6808.

Rockland County. Chapter 286 of the Laws of Rockland County requires everyone performing home improvement work in the county to hold a county Home Improvement License, issued by the Department of Consumer Protection / Weights and Measures. Rockland is unusually explicit about out-of-jurisdiction applicants: its applications are grouped by qualification route, one for applicants relying on experience in the trade classification, one for applicants who have held a license in another jurisdiction for at least five years without complaints or violations, and one for applicants posting a surety bond for the classification. A Home Improvement Licensing Board of trade members reviews credentials and investigates complaints, contractors must carry liability, workers' compensation and disability insurance, and general contractors must use licensed and insured subcontractors. Confirm the current fee and classification list with the department before filing: 845-364-3901.

Putnam County. The Office of Consumer Affairs registers home improvement contractors for $300, covering a two-year registration, and requires a $25,000 license and permit bond written for a two-year period, with the registration's expiration set to match the bond term. Also required: a certified business, partnership or corporate filing document, an ACORD liability certificate naming Putnam County Consumer Affairs as certificate holder and Putnam County as additionally insured with the scope of work spelled out, a workers' compensation form or CE-200, a notarized child support form for non-corporations, current vehicle registrations, a photo of the owner or highest-ranking officer, a driver's license from the applicant's home state, and — again a break for someone arriving with credentials — "copies of CURRENT HOME IMPROVEMENT LICENSES - if held in other municipalities". Decals come with the registration, extras are $5 each. Landscaping and lawn care contractors add a Lawn Care Best Management Practices certificate. 845-808-1617 ext. 46024.

Buffalo. Chapter 144 of the City of Buffalo Ordinances requires anyone "engaged in a home improvement business (i.e. painting, siding, roofing) or doing construction work in the City of Buffalo" to hold a city Contractor License, which "does not allow for plumbing, heating, cooling or electrical work". Working without one is an unclassified misdemeanor carrying up to $1,000 or 60 days. Residential categories are Handyman Contractor (minor repairs and maintenance, one named person, no roofing, siding or large renovations), Specialty Contractor, Sub-Contractor (cannot pull permits and must work under a prime) and New Housing Contractor. Minimum general liability aggregates are $50,000 for Handyman and Construction Manager, $500,000 for Light Commercial, Specialty, Subcontractor and New Housing, and $2,000,000 for General Contractor and every demolition grade. Applicants also file workers' compensation proof (C105.2, U-26.3, SI-12 or GSI-105.2) or a CE-200 that bars using subcontractors, register the business name with the Erie County Clerk even if it is registered elsewhere, and supply RRP or EPA lead firm certification unless exempt. The step that surprises people: the application must arrive at least seven days before the monthly Construction & Home Improvement Advisory Board meeting and "attendance at the meeting is mandatory for the applicant", in person or through a notarized representative. Ask the Office of Licenses for the current fee, which is not printed on the application packet: (716) 851-6583.

Rochester. Rochester licenses electricians, plumbers and stationary engineers / refrigeration operators and nothing else — there is no city home improvement or builder license. The city puts the duty on whoever pulls the permit: it is "the applicant's responsibility to ensure all required contractors are licensed, proof of insurance is filed and the project complies with the permit". Building Permit Office 585-428-6526.

Everywhere else. Outside these jurisdictions, hundreds of New York towns and villages regulate residential work only through the building permit and the state's Uniform Code, while others have their own contractor registration ordinances. Before signing anything, ask the county consumer affairs office and the town or village building department that covers the job site, and remember that General Business Law Article 36-A's written-contract and escrow rules apply everywhere in the state whether or not a license is required.

Moving to New YorkLeaving New York

Common questions

Do I have to take the Alabama residential contractor exam if I'm licensed in New York?
Yes. Alabama requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Alabama residential contractor license from New York?
Published fees on this path total $480, not counting exam vendor fees or bonds.
Do my New York work hours count in Alabama?
No. Alabama does not credit out-of-state hours on this path.
How long does the application take?
The board's published or typical processing time is about 28 days.
Does it work the other way, from Alabama to New York?
Not necessarily. Reciprocity is directed. Going from Alabama to New York, the mechanism is not applicable.

Sources

  1. Alabama Home Builders Licensure Board - Frequently Asked Questions, Applicants (reciprocity, thresholds, timelines) · Alabama Home Builders Licensure Board · Faq · verified September 17, 2026
  2. Alabama Home Builders Licensure Board - How to Get Licensed (license types, exams, credit report, bond) · Alabama Home Builders Licensure Board · Agency Page · verified September 17, 2026
  3. Home Builders Licensure Law and Administrative Rules and Regulations (law effective October 1, 2025; rules effective November 14, 2025) · Ala. Code § 34-14A-1 et seq.; Ala. Admin. Code r. 465-X-3-.04, 465-X-3-.06, 465-X-4-.04 · Alabama Home Builders Licensure Board · Admin Rule · verified September 17, 2026
  4. New Unlimited License Application Packet, Corporate - Alabama Home Builders Licensure Board (with Prov Candidate Information Bulletin) · Ala. Code §§ 34-14A-7, 34-14A-14 · Alabama Home Builders Licensure Board · Form · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related