Ohio to Alabama: residential contractor license reciprocity
Ohio does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Unlimited Home Builders License by examination (states with no exemption on the Board's list)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A residential builder arriving from a state that is not on the Board's short exemption list gets no credit for the license held elsewhere. The applicant entity files the notarized application, names its designated qualifying representative, pays the $100 processing fee and the $250 annual license and Recovery Fund fees in one $350 payment, orders a business-related credit report sent straight to the Board by the credit agency, files the entity certificates and proves citizenship or lawful presence. The qualifying representative then takes both Alabama Home Builders exams through Prov: the Skill exam (80 questions, four hours, 66% to pass, based on the 2015 International Residential Code) and the Business and Law exam (40 questions, two hours, 70% to pass). No Board authorization is needed to book the exams and a passing score stays good for three years. Alabama sets no minimum years of building experience, so documented out-of-state work neither shortens nor replaces any step. The Board says a complete file takes roughly three to four weeks and must be complete seven days before the Board meeting that reviews it.
Both Prov examinations are required on this path, and the Business and Law exam is never waived at any level. A license with limitation or limited to roofing skips the examination entirely, but its experience test is a business or occupational license as a contractor issued by an Alabama municipality, township or county, currently held or held within the year before the application, so an out-of-state local license does not open that route; the alternatives are a written recommendation from the holder of an unlimited home builders license in Alabama or any other state, or from a building official in Alabama or any other state. Licenses run for the calendar year and renew by November 30 for the following year, with six hours of continuing education. A general contractor license issued by the other Alabama board does not cover residential construction unless its number is below 18908, which means issued before the Home Builders Licensure Board was created in 1992.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Do not count
- Typical processing
- About 28 days
What you must already have
- The Board must be satisfied that the applicant has the experience, ability, good character and willingness to serve the public required by Ala. Code § 34-14A-5. There is no published minimum number of years or hours of residential building experience for an unlimited license.
What you'll do to get licensed in Alabama
- 1Trade exam. Pass the destination's trade exam. Alabama HBLB Skill Exam through Prov: 80 questions, 4 hours, 66% to pass, open book against the 2015 International Residential Code and the Residential Home Builder Study Guide, covering plan reading, sitework and foundations, concrete, masonry, carpentry, roofing, interior and exterior finish, associated trades and OSHA. No Board authorization is needed before booking, and a passing score stays valid for three years..
- 2Law / code exam. Pass a law, rules, or code exam. Alabama HBLB Business and Law exam through Prov: 40 questions, 2 hours, 70% to pass, open book against the NASCLA Contractors Guide to Business, Law and Project Management, Alabama Residential Construction edition. This exam is never waived..
- 3Exam fee. Pay the exam fee ($130). $130 if the Skill and Business and Law exams are taken on the same day, or $80 for each exam taken on separate days. Testing fees are paid directly to Prov, not to the Board..
- 4Application fee. Pay the application fee ($100). Non-refundable new license application processing fee (Ala. Admin. Code r. 465-X-4-.04(3)). It is paid together with the annual license fee in a single payment and is not returned if the application is withdrawn or denied..
- 5License fee. Pay the license or certificate fee ($250). Annual license fee of $235 plus the $15 annual Homeowners' Recovery Fund fee, sent with the application as one $350 payment together with the $100 processing fee. The license fee is refunded on written request if the application is rejected or denied. A license limited to residential roofing costs $150 a year and pays no Recovery Fund fee. Cheque or money order only; the Board does not take cash or credit cards..
- 6Financial responsibility. Show financial responsibility. Business-related credit report including a public records search, ordered by the applicant at a fee of $35 and sent to the Board directly by the credit reporting agency. There is no net worth or working capital minimum, but outstanding business-related collection or foreclosure accounts must not exceed $500 in total, and outstanding judgments, judgment liens or perfected liens must not exceed $500 in total ($1,000 where the matter is under dispute or on appeal), unless the applicant documents payment, a payment plan or the circumstances to the Board's satisfaction. An application pending more than 90 days may need an updated report..
- 7Business license. Obtain a business license. The license is issued to the legal entity that will contract. A corporation, limited liability company or limited partnership files a Certificate of Compliance from the Alabama Department of Revenue, and an entity organized outside Alabama also files a Certificate of Existence from the Alabama Secretary of State. Conducting residential homebuilding through an entity that does not itself hold an Alabama Home Builders license is a violation of the Act..
- 8Surety bond. Post a surety bond ($10,000) (if applicable). Required only for a license limited to residential roofing: a surety bond of not less than $10,000 naming the Home Builders Licensure Board as obligee, valid through December 31 of the licensure year and submitted to the Board directly by the surety (Ala. Admin. Code r. 465-X-3-.04(5)). Roofers file this instead of a credit report. Unlimited and limited licenses require no bond..
- 9Insurance. Carry the required insurance (if applicable). The Board states that the law regulating residential home builders does not address insurance, so no policy is required for licensure. Other Alabama laws, and most lenders and homeowners, still expect general liability and workers compensation coverage; the Alabama Department of Labor answers questions about workers compensation..
- 10Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: six credit hours of Board-approved continuing education each year, two of them in Alabama-specific subjects, taken by the designated qualifying representative where the license is held by an entity. Licenses run for the calendar year and renewal applications are due by November 30 of the preceding year (Ala. Admin. Code r. 465-X-3-.06)..
- 11Other. Notarised application on the Board's form (no photocopies), notarized corporate minutes or equivalent naming the designated qualifying representative as an officer, general partner, member or manager, and proof of United States citizenship or lawful presence for every applicant..
Published fees on this path total $480, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Law / code exam
- Exam fee · $130
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $10,000 · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Alabama licenses residential contractors
Alabama residential contractor · “Residential Home Builders License (without limitation, with limitation, or limited to residential roofing)”
Statewide license
Issued by Alabama Home Builders Licensure Board
Alabama licenses residential builders statewide through the Home Builders Licensure Board in Montgomery, which is a different agency from the Alabama Licensing Board for General Contractors that handles commercial work. A license is required to construct, remodel, repair or improve a residential structure where the cost of the undertaking including labor and materials exceeds $10,000. There are three tiers: a license without limitation (unlimited), which covers whole houses, work involving more than one trade and residential roofing; a license with limitation (limited), for single-trade work that is not a whole residence; and a license limited to residential roofing. The license is held by the business, not the person: an individual may be licensed personally, but a partnership, corporation, LLC or non-profit must name a designated qualifying representative who is a general partner, officer, member or manager and who personally meets the experience and examination requirements, so an inbound builder applies as or for the entity that will sign contracts. An unlimited license is earned by passing the Alabama Home Builders Skill exam and the Business and Law exam through Prov and by showing business-related financial responsibility through a credit report; Alabama sets no minimum years of experience. The Board publishes one reciprocity rule, naming five states whose residential licensees may skip the Skill exam.
Why Ohio has nothing to transfer
Ohio residential contractor · “Home improvement / remodeling contractor license or registration (city-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license and register residential contractors
Ohio issues no statewide residential building, home builder or home improvement contractor license. The Ohio Construction Industry Licensing Board (OCILB), in the Department of Commerce, licenses individual contractors in five commercial trades only - electrical, HVAC, refrigeration, plumbing and hydronics - and its own page states that "all local building and health departments regulate residential contractors"; the Department of Commerce says plainly that "while residential contractors are not required to be licensed by the state, local building departments throughout Ohio may have their own verification or licensing requirements." Housing work is therefore licensed or registered jurisdiction by jurisdiction, and the rules vary a great deal: Columbus and Toledo run real competency licenses built on the ICC Ohio home improvement and building contractor examination (exam ID 767-OH-GC), documented experience and a board hearing, while Cleveland, Cincinnati and Akron require registration backed by insurance, bonding or workers' compensation but no exam, and Dayton registers only the trades. A remodeler moving to Ohio has no state license to transfer and no state reciprocity to apply for, so the practical work is qualifying or registering in each place where they pull permits and carrying the insurance each one demands. The credential that actually travels is the ICC contractor examination rather than another state's license. Anyone who self-performs electrical, HVAC, refrigeration, plumbing or hydronics work still needs the matching OCILB state license, and Ohio's only statewide residential construction statute, R.C. Chapter 4722, governs written contracts and down payments on home construction service contracts over $25,000 rather than licensing anyone.
How local licensing works in Ohio
How local licensing works. Ohio has roughly 800 certified building departments, and each city, county or township decides for itself whether residential contractors are licensed, registered or left alone. A credential from one Ohio jurisdiction does not carry into the next one, and none of the jurisdictions below grants anything for a license held in another state. Use the Board of Building Standards jurisdiction map at com.ohio.gov/JurisdictionMap to find out which department has authority over a given address before applying anywhere.
Columbus. Building and Zoning Services licenses residential work under Chapter 4114 of the Columbus Building Code. A Home Improvement General Contractor license covers structural work on existing one-, two- and three-family dwellings and their accessory structures. It requires "a score of 70% or higher for 767 Ohio Home Improvement Contractor" (the ICC exam, booked through the International Code Council on (877) 783-3926), a "minimum of three (3) full years of hands-on experience in the one (1), two (2), and three (3) family home improvement field", and approval by the Board of Review of General and Home Improvement Contractors, which meets on the first Wednesday of each month and needs the notarized application at least seven days beforehand. A Home Improvement Limited Contractor license covers roofing, siding, decking, waterproofing, fencing, driveway approaches and similar specialized work and requires one full year of hands-on experience in that field plus board approval. A builder putting up new houses registers instead as a General Contractor, which covers "all permits to build new 1, 2, or 3 family, multi-family (4 or more dwelling units), and commercial structures" and needs a $25,000 bond on the city's bond form and liability insurance of at least $300,000 for damages to a single person and $500,000 per occurrence, with no exam. The 2026 fee schedule sets a $300 application fee for the board-reviewed licenses (including Home Improvement Contractor and HIC-Limited) and a $350 annual license and registration fee; a change of assignment is $100. Registrations expire at the end of the twelfth month from issuance. Building and Zoning Services, 111 North Front Street, (614) 645-7433, [email protected].
Toledo. The Division of Building Inspection licenses "contractors engaged in the business of making improvements to residential structures regulated by the Residential Code of Ohio" under Toledo Municipal Code Chapter 1313, in two tiers. A Certified Remodeling Contractor "may engage in all residential construction, alterations and renovations" and must first pass the ICC Building Contractor C examination (exam ID 767-OH-GC, delivered by Pearson VUE, nearest center in Maumee) and then the City of Toledo Certified Remodeling Exam covering Chapters 11 and 13 of the Municipal Code. A Limited Remodeling Contractor is "restricted to residential improvements such as roof and window replacement, siding application, installation of insulation, fencing, and swimming pools greater than 24 inches in depth" and sits only the city exam, which covers Chapter 13 and the 2024 International Residential Code. Both exams are open book. Applications go first to the city's Board of Control for Home Improvement and Remodeling Contractors, which decides whether the applicant may test, and the applicant must document one of four qualifications: a two-year degree in construction management, architecture or engineering; a licensed journeyman certificate in a construction trade; five years working in general building construction under a licensed remodeler, homebuilder or general contractor, evidenced by a notarized employer statement and five years of tax records; or five years self-employed on construction projects, evidenced by a notarized resume and five years of tax records. Three unrelated references and a full employment history are filed with the application. The fee is $200, of which $175 is refunded if the Board of Control finds the applicant unqualified to test. After passing, a Certificate of Compliance from the Division of Taxation is required before the license issues, and holders must carry liability insurance "in the amount of $100,000 to $300,000." Licenses renew annually and expire December 31; ten hours of continuing education are required each year. One Government Center, Suite 1600, 419-245-1220.
Cleveland. The Department of Building & Housing states that "to build or rehabilitate Cleveland homes, contractors must be bonded, insured, and registered", and that "contractors must be registered with the City of Cleveland within their trade in order to obtain permits. Separate permits are required for each separate trade, i.e. general, plumbing, HVAC, electrical, and elevator." Registration runs under Chapter 3107 of the Codified Ordinances, Registration of Contractors, which provides for both a Certificate of Registration and a Limited Certificate of Registration and sets separate qualifications for each. The city publishes a General Contractor Registration Application package in the Contractor Packages section of its construction permitting resources page; the bond amount, insurance limits and fee are set out in that package and in Chapter 3107 rather than on the department's web pages, so confirm them with Building & Housing on 216-664-2910 before filing. Registration status can be checked on 216-664-2884. Electrical, plumbing and HVAC contractors must hold the OCILB state license before the city will register them.
Cincinnati. The Department of Buildings & Inspections registers contractors under Chapter 1106 of the Municipal Code in three classes, two of which reach housing. A Home Improvement Contractor registration covers "all contractors that are involved in repair, remodeling, alteration, improvement, or addition to any building used as a private residence in one, two and three family structures." A Building Construction Contractor registration covers everything else, and expressly "include[s] contractors that engage in the construction of new one, two and three family dwellings" as well as specialties such as demolition, carpentry, masonry and glazing. The filing is the signed application, a certificate of liability insurance from an Ohio-licensed insurer with "minimum liability limits of one hundred thousand dollars ($100,000) for damages to a single person, and three hundred thousand dollars ($300,000) for one (1) occurrence", proof of Ohio workers' compensation, an assignment form naming everyone allowed to sign permit applications, and a federal tax ID or Social Security number. The fee is $125.00 plus a 3% technology surcharge, a 1% financial recovery fee and a 1% training surcharge, a total of $131.25 a year, and a registration may be bought for up to three years; same-day processing costs $208 more and mid-term changes $78. There is no exam, experience or bond requirement. An owner of a one-, two- or three-family dwelling is exempt where they personally perform the work and will occupy the home for at least a year. Working unregistered draws a $750 citation for a first offense. 805 Central Avenue, Suite 500, (513) 352-3271.
Akron and Summit County. Akron's rule is short: "the City of Akron requires all contractors regardless of trade to register as a contractor if the work they are performing requires a permit to do the work." The filing is the contractor registration application, an Akron Tax Registration Number, a certificate of liability insurance, any state licenses the trade requires, and proof of workers' compensation unless there are no employees. There is no exam and no published registration fee. The building permits themselves come from the Summit County Department of Building Standards, which in March 2024 replaced annual contractor registration with a permit-based process: "the $135 annual fee for contractors and the requirement for a $10,000 bond are now eliminated", though "contractors will still be required to provide liability insurance, State license if applicable, and a Tax ID Number." The same code change requires that property owners working on homes they do not and will not occupy have a qualified contractor take responsibility for the installations. Akron Plans & Permits, 1030 E. Tallmadge Ave., 330-375-2010; registration questions 330-375-2037. Summit County Building Standards, same address, 330-630-7280.
Dayton. The Division of Building Inspection publishes registration and bond forms only for electrical, plumbing, warm air heating and pipe-laying contractors, with separate plumbing journeyman and apprentice forms. There is no Dayton registration for a remodeler or a homebuilder as such; a residential builder pulls permits and hires or employs the registered trades. Building Inspection, 937-333-3979; One Stop Center, 371 West Second Street, second floor, 937-333-3883.
Cuyahoga County. The county created a Division of Building Standards in 2025 "with the mission of improving compliance with State of Ohio Board of Building Standards for both residential and commercial/non-residential construction within the County." It will provide contractor registration, plan review, permitting and inspections for partner communities, with registration "completed through a secure online portal" on its website; the partner community list is still being announced and an approved fee schedule is due by December 1, 2026. The county notes that it "does not offer formal endorsement, evaluation, or recommendation of any contractors or construction services" and directs residents to the state's building department look-up tool for their address. [email protected].
Everywhere else. The remaining hundreds of Ohio municipalities, townships and county building departments each set their own rules, from a full licensing board to nothing beyond a permit and proof of insurance. Identify the department with jurisdiction over the address first, then ask what it registers. Whatever the local answer, the statewide obligations are the same: an OCILB license for any self-performed electrical, HVAC, refrigeration, plumbing or hydronics work, and a written contract meeting R.C. Chapter 4722 for any home construction service contract over $25,000.
- Columbus (Building and Zoning Services - Home Improvement General and Limited Contractor licenses)
- Cleveland (Department of Building & Housing - contractor registration under Codified Ordinances ch. 3107)
- Cincinnati (Buildings & Inspections - Home Improvement and Building Construction contractor registration)
- Toledo (Division of Building Inspection - Certified and Limited Home Improvement and Remodeling Contractor licenses)
- Akron (Engineering Bureau - contractor registration for any permitted work)
- Summit County (Department of Building Standards - permit-based contractor process; issues Akron's building permits)
- Dayton (Division of Building Inspection - trade contractor registration only)
- Cuyahoga County (Division of Building Standards - contractor registration for partner communities)
Common questions
- Do I have to take the Alabama residential contractor exam if I'm licensed in Ohio?
- Yes. Alabama requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Alabama residential contractor license from Ohio?
- Published fees on this path total $480, not counting exam vendor fees or bonds.
- Do my Ohio work hours count in Alabama?
- No. Alabama does not credit out-of-state hours on this path.
- How long does the application take?
- The board's published or typical processing time is about 28 days.
- Does it work the other way, from Alabama to Ohio?
- Not necessarily. Reciprocity is directed. Going from Alabama to Ohio, the mechanism is not applicable.
Sources
- Alabama Home Builders Licensure Board - Frequently Asked Questions, Applicants (reciprocity, thresholds, timelines) · Alabama Home Builders Licensure Board · Faq · verified September 17, 2026
- Alabama Home Builders Licensure Board - How to Get Licensed (license types, exams, credit report, bond) · Alabama Home Builders Licensure Board · Agency Page · verified September 17, 2026
- Home Builders Licensure Law and Administrative Rules and Regulations (law effective October 1, 2025; rules effective November 14, 2025) · Ala. Code § 34-14A-1 et seq.; Ala. Admin. Code r. 465-X-3-.04, 465-X-3-.06, 465-X-4-.04 · Alabama Home Builders Licensure Board · Admin Rule · verified September 17, 2026
- New Unlimited License Application Packet, Corporate - Alabama Home Builders Licensure Board (with Prov Candidate Information Bulletin) · Ala. Code §§ 34-14A-7, 34-14A-14 · Alabama Home Builders Licensure Board · Form · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.