LicensebyState

Ohio to North Carolina: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 7 sources

Ohio does not issue a statewide residential contractor license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Residential Contractor license by examination (states without a waiver agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

An out-of-state residential builder arriving from a state that has no examination waiver agreement with North Carolina gets no credit for the license held elsewhere. The applicant entity files the online application, names a qualifier, shows financial responsibility for the limitation it wants, clears the background check and supplies character references, and the qualifier then sits the North Carolina Residential Contractor examination: 90 questions, 210 minutes, 70% to pass, open book against the North Carolina State Building Code and the Board law and rule references. Because North Carolina requires no trade experience for a general contractor license, documented out-of-state hours neither shorten nor replace any step. The Board does not publish a processing time; the application portal and the Board at (919) 571-4183 are where to ask.

There is no separate Business and Law examination on this path: North Carolina law, licensing, liens, erosion and sedimentation control and building code questions sit inside the Residential Contractor examination itself, and 21 NCAC 12A .0402(b) requires every applicant to be tested on the Board’s laws and rules. The standalone Business and Law examination is the one required of applicants who come in on an out-of-state examination waiver or on the NASCLA examination. The Board accepts the NASCLA Accredited Examination for the Building classification, not the Residential classification, so it is authored on the general level of this page. Licenses expire on the first day of January after issue and renew at $75, $100 or $125 by limitation. Ask the Board to confirm which examinations you owe before you pay PSI.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Do not count

What you must already have

  • The qualifier is at least 18 years old and possesses good moral character as determined by the Board (G.S. 87-10). North Carolina sets no minimum trade experience or apprenticeship hours for a general contractor license.

What you'll do to get licensed in North Carolina

  1. 1Trade exam. Pass the destination's trade exam. North Carolina Residential Contractor examination administered by PSI Services LLC after the Board approves the application and issues an eligibility letter: 90 questions, 210 minutes, 70% to pass, open book. One examination is required for each classification sought (21 NCAC 12A .0403). There is no published waiting period between attempts within a 12-month window..
  2. 2Application fee. Pay the application fee ($75). Nonrefundable application fee set by the limitation requested: $75 for a limited license, $100 for an intermediate license and $125 for an unlimited license (G.S. 87-10(a1); 21 NCAC 12A .0304(a)). The amount shown is the limited-license fee..
  3. 3Exam fee. Pay the exam fee ($79). $79 per examination, paid to PSI Services LLC when the examination is scheduled. One fee for each examination taken..
  4. 4Financial responsibility. Show financial responsibility of at least $17,000. Evidence of financial responsibility for the entity that will hold the license. Current assets must exceed current liabilities by at least $17,000 for a limited license (or total net worth of at least $80,000), $75,000 for an intermediate license, or $150,000 for an unlimited license. Intermediate and unlimited applicants must show the figure in an agreed-upon procedures report on the Board form or an audited financial statement prepared by a CPA or independent accountant. Statements must be no more than twelve months old and conform to GAAP (21 NCAC 12A .0204). The amount shown is the limited-license working capital figure..
  5. 5Surety bond. Post a surety bond ($175,000) (if applicable). Optional alternative to the working capital or net worth figure: a continuous surety bond of $175,000 for a limited license, $500,000 for an intermediate license or $1,000,000 for an unlimited license, from a surety authorized in North Carolina and rated Superior or Excellent by A.M. Best. Proof is filed with the application and with every annual renewal, and the bond must stay in force until the licensee can show the required working capital (21 NCAC 12A .0204(e))..
  6. 6Background check. Complete a background check. Criminal background check through the third-party vendor the Board names, paid directly to the vendor. Every qualifier submits to the check, along with the sole proprietor, the president of a corporation, all managers and members of an LLC, or all partners of a partnership (21 NCAC 12A .0303(b))..
  7. 7Business license. Obtain a business license. The license is issued to a legal entity, so the individual, corporation, LLC or partnership that will contract must be formed and, if organized outside North Carolina, authorized to transact business in the State before the license is issued (G.S. 87-10.1)..
  8. 8Insurance. Carry the required insurance (if applicable). The Board states there is no insurance or bonding requirement for a general contractor license itself. North Carolina workers compensation law still applies to the business independently of licensure, and owners, lenders and general contractors commonly require general liability coverage by contract..
  9. 9Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: at least one qualifier on a building, residential or unclassified license must complete eight hours of Board-approved continuing education each year, made up of a two-hour mandatory course and six elective hours, with up to four elective hours carried forward (G.S. 87-10.2)..
  10. 10Other. Letters of character reference required by 21 NCAC 12A .0303(a)(9) and .0308, certified copies of court records for any criminal convictions of the applicant or its qualifiers, and disclosure of disciplinary history with this or any other licensing agency..

Published fees on this path total $154, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Exam fee · $79

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $175,000 · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · if applicable

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

How North Carolina licenses residential contractors

North Carolina residential contractor · “General Contractor, Residential classification (Limited, Intermediate or Unlimited)

Statewide license

Verified September 17, 2026· 5 sources

Issued by North Carolina Licensing Board for General Contractors

North Carolina licenses residential building contractors statewide through the North Carolina Licensing Board for General Contractors. A license is required for any single undertaking costing $40,000 or more, and the Residential classification covers construction and demolition of residential units built to the North Carolina Residential Building Code, together with the ancillary site work, driveways, sidewalks and water and wastewater systems and certain specialty work on those units. The license belongs to the business, not the person: it is issued to an individual, corporation, LLC or partnership and is qualified by a named qualifier, an owner, officer, member or responsible managing employee who personally passes the examination, so an inbound contractor applies as or for the entity that will sign contracts. Every license also carries a monetary limitation driven by financial responsibility rather than by skill: Limited allows single projects up to $750,000, Intermediate up to $1,500,000 and Unlimited has no project cap. North Carolina sets no minimum experience or apprenticeship hours, so out-of-state years do not shorten anything, and the Board says it does not have full reciprocity with any state; what it does have is examination waiver agreements with a short list of named states.

Moving to North CarolinaLeaving North Carolina

Why Ohio has nothing to transfer

Ohio residential contractor · “Home improvement / remodeling contractor license or registration (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 22 sources

Issued by No state authority; cities and counties license and register residential contractors

Ohio issues no statewide residential building, home builder or home improvement contractor license. The Ohio Construction Industry Licensing Board (OCILB), in the Department of Commerce, licenses individual contractors in five commercial trades only - electrical, HVAC, refrigeration, plumbing and hydronics - and its own page states that "all local building and health departments regulate residential contractors"; the Department of Commerce says plainly that "while residential contractors are not required to be licensed by the state, local building departments throughout Ohio may have their own verification or licensing requirements." Housing work is therefore licensed or registered jurisdiction by jurisdiction, and the rules vary a great deal: Columbus and Toledo run real competency licenses built on the ICC Ohio home improvement and building contractor examination (exam ID 767-OH-GC), documented experience and a board hearing, while Cleveland, Cincinnati and Akron require registration backed by insurance, bonding or workers' compensation but no exam, and Dayton registers only the trades. A remodeler moving to Ohio has no state license to transfer and no state reciprocity to apply for, so the practical work is qualifying or registering in each place where they pull permits and carrying the insurance each one demands. The credential that actually travels is the ICC contractor examination rather than another state's license. Anyone who self-performs electrical, HVAC, refrigeration, plumbing or hydronics work still needs the matching OCILB state license, and Ohio's only statewide residential construction statute, R.C. Chapter 4722, governs written contracts and down payments on home construction service contracts over $25,000 rather than licensing anyone.

How local licensing works in Ohio

How local licensing works. Ohio has roughly 800 certified building departments, and each city, county or township decides for itself whether residential contractors are licensed, registered or left alone. A credential from one Ohio jurisdiction does not carry into the next one, and none of the jurisdictions below grants anything for a license held in another state. Use the Board of Building Standards jurisdiction map at com.ohio.gov/JurisdictionMap to find out which department has authority over a given address before applying anywhere.

Columbus. Building and Zoning Services licenses residential work under Chapter 4114 of the Columbus Building Code. A Home Improvement General Contractor license covers structural work on existing one-, two- and three-family dwellings and their accessory structures. It requires "a score of 70% or higher for 767 Ohio Home Improvement Contractor" (the ICC exam, booked through the International Code Council on (877) 783-3926), a "minimum of three (3) full years of hands-on experience in the one (1), two (2), and three (3) family home improvement field", and approval by the Board of Review of General and Home Improvement Contractors, which meets on the first Wednesday of each month and needs the notarized application at least seven days beforehand. A Home Improvement Limited Contractor license covers roofing, siding, decking, waterproofing, fencing, driveway approaches and similar specialized work and requires one full year of hands-on experience in that field plus board approval. A builder putting up new houses registers instead as a General Contractor, which covers "all permits to build new 1, 2, or 3 family, multi-family (4 or more dwelling units), and commercial structures" and needs a $25,000 bond on the city's bond form and liability insurance of at least $300,000 for damages to a single person and $500,000 per occurrence, with no exam. The 2026 fee schedule sets a $300 application fee for the board-reviewed licenses (including Home Improvement Contractor and HIC-Limited) and a $350 annual license and registration fee; a change of assignment is $100. Registrations expire at the end of the twelfth month from issuance. Building and Zoning Services, 111 North Front Street, (614) 645-7433, [email protected].

Toledo. The Division of Building Inspection licenses "contractors engaged in the business of making improvements to residential structures regulated by the Residential Code of Ohio" under Toledo Municipal Code Chapter 1313, in two tiers. A Certified Remodeling Contractor "may engage in all residential construction, alterations and renovations" and must first pass the ICC Building Contractor C examination (exam ID 767-OH-GC, delivered by Pearson VUE, nearest center in Maumee) and then the City of Toledo Certified Remodeling Exam covering Chapters 11 and 13 of the Municipal Code. A Limited Remodeling Contractor is "restricted to residential improvements such as roof and window replacement, siding application, installation of insulation, fencing, and swimming pools greater than 24 inches in depth" and sits only the city exam, which covers Chapter 13 and the 2024 International Residential Code. Both exams are open book. Applications go first to the city's Board of Control for Home Improvement and Remodeling Contractors, which decides whether the applicant may test, and the applicant must document one of four qualifications: a two-year degree in construction management, architecture or engineering; a licensed journeyman certificate in a construction trade; five years working in general building construction under a licensed remodeler, homebuilder or general contractor, evidenced by a notarized employer statement and five years of tax records; or five years self-employed on construction projects, evidenced by a notarized resume and five years of tax records. Three unrelated references and a full employment history are filed with the application. The fee is $200, of which $175 is refunded if the Board of Control finds the applicant unqualified to test. After passing, a Certificate of Compliance from the Division of Taxation is required before the license issues, and holders must carry liability insurance "in the amount of $100,000 to $300,000." Licenses renew annually and expire December 31; ten hours of continuing education are required each year. One Government Center, Suite 1600, 419-245-1220.

Cleveland. The Department of Building & Housing states that "to build or rehabilitate Cleveland homes, contractors must be bonded, insured, and registered", and that "contractors must be registered with the City of Cleveland within their trade in order to obtain permits. Separate permits are required for each separate trade, i.e. general, plumbing, HVAC, electrical, and elevator." Registration runs under Chapter 3107 of the Codified Ordinances, Registration of Contractors, which provides for both a Certificate of Registration and a Limited Certificate of Registration and sets separate qualifications for each. The city publishes a General Contractor Registration Application package in the Contractor Packages section of its construction permitting resources page; the bond amount, insurance limits and fee are set out in that package and in Chapter 3107 rather than on the department's web pages, so confirm them with Building & Housing on 216-664-2910 before filing. Registration status can be checked on 216-664-2884. Electrical, plumbing and HVAC contractors must hold the OCILB state license before the city will register them.

Cincinnati. The Department of Buildings & Inspections registers contractors under Chapter 1106 of the Municipal Code in three classes, two of which reach housing. A Home Improvement Contractor registration covers "all contractors that are involved in repair, remodeling, alteration, improvement, or addition to any building used as a private residence in one, two and three family structures." A Building Construction Contractor registration covers everything else, and expressly "include[s] contractors that engage in the construction of new one, two and three family dwellings" as well as specialties such as demolition, carpentry, masonry and glazing. The filing is the signed application, a certificate of liability insurance from an Ohio-licensed insurer with "minimum liability limits of one hundred thousand dollars ($100,000) for damages to a single person, and three hundred thousand dollars ($300,000) for one (1) occurrence", proof of Ohio workers' compensation, an assignment form naming everyone allowed to sign permit applications, and a federal tax ID or Social Security number. The fee is $125.00 plus a 3% technology surcharge, a 1% financial recovery fee and a 1% training surcharge, a total of $131.25 a year, and a registration may be bought for up to three years; same-day processing costs $208 more and mid-term changes $78. There is no exam, experience or bond requirement. An owner of a one-, two- or three-family dwelling is exempt where they personally perform the work and will occupy the home for at least a year. Working unregistered draws a $750 citation for a first offense. 805 Central Avenue, Suite 500, (513) 352-3271.

Akron and Summit County. Akron's rule is short: "the City of Akron requires all contractors regardless of trade to register as a contractor if the work they are performing requires a permit to do the work." The filing is the contractor registration application, an Akron Tax Registration Number, a certificate of liability insurance, any state licenses the trade requires, and proof of workers' compensation unless there are no employees. There is no exam and no published registration fee. The building permits themselves come from the Summit County Department of Building Standards, which in March 2024 replaced annual contractor registration with a permit-based process: "the $135 annual fee for contractors and the requirement for a $10,000 bond are now eliminated", though "contractors will still be required to provide liability insurance, State license if applicable, and a Tax ID Number." The same code change requires that property owners working on homes they do not and will not occupy have a qualified contractor take responsibility for the installations. Akron Plans & Permits, 1030 E. Tallmadge Ave., 330-375-2010; registration questions 330-375-2037. Summit County Building Standards, same address, 330-630-7280.

Dayton. The Division of Building Inspection publishes registration and bond forms only for electrical, plumbing, warm air heating and pipe-laying contractors, with separate plumbing journeyman and apprentice forms. There is no Dayton registration for a remodeler or a homebuilder as such; a residential builder pulls permits and hires or employs the registered trades. Building Inspection, 937-333-3979; One Stop Center, 371 West Second Street, second floor, 937-333-3883.

Cuyahoga County. The county created a Division of Building Standards in 2025 "with the mission of improving compliance with State of Ohio Board of Building Standards for both residential and commercial/non-residential construction within the County." It will provide contractor registration, plan review, permitting and inspections for partner communities, with registration "completed through a secure online portal" on its website; the partner community list is still being announced and an approved fee schedule is due by December 1, 2026. The county notes that it "does not offer formal endorsement, evaluation, or recommendation of any contractors or construction services" and directs residents to the state's building department look-up tool for their address. [email protected].

Everywhere else. The remaining hundreds of Ohio municipalities, townships and county building departments each set their own rules, from a full licensing board to nothing beyond a permit and proof of insurance. Identify the department with jurisdiction over the address first, then ask what it registers. Whatever the local answer, the statewide obligations are the same: an OCILB license for any self-performed electrical, HVAC, refrigeration, plumbing or hydronics work, and a written contract meeting R.C. Chapter 4722 for any home construction service contract over $25,000.

Moving to OhioLeaving Ohio

Common questions

Do I have to take the North Carolina residential contractor exam if I'm licensed in Ohio?
Yes. North Carolina requires the trade exam on this path.
What does it cost to get a North Carolina residential contractor license from Ohio?
Published fees on this path total $154, not counting exam vendor fees or bonds.
Do my Ohio work hours count in North Carolina?
No. North Carolina does not credit out-of-state hours on this path.
Does it work the other way, from North Carolina to Ohio?
Not necessarily. Reciprocity is directed. Going from North Carolina to Ohio, the mechanism is not applicable.

Sources

  1. N.C.G.S. 87-10 - Application for license; examination; certificate; renewal · N.C.G.S. 87-10(a), (a1), (b), (c), (c1), (e) · North Carolina General Assembly · Statute · verified September 17, 2026
  2. Classifications and limitations - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  3. FAQ for Contractors - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Faq · verified September 17, 2026
  4. Laws and Regulations Applicable to General Contracting in the State of North Carolina (2026 edition) · 21 NCAC 12A .0202, .0204, .0303, .0304, .0402, .0403, .0404 · North Carolina Licensing Board for General Contractors · Admin Rule · verified September 17, 2026
  5. License applicants - NC Licensing Board for General Contractors · North Carolina Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  6. Licensure Application Questions - License Type Selector (online application preview) · North Carolina Licensing Board for General Contractors · Form · verified September 17, 2026
  7. State of North Carolina Licensing Board for General Contractors - Candidate Information Bulletin · PSI Services LLC for the North Carolina Licensing Board for General Contractors · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related