Ohio to Utah: residential contractor license reciprocity
Ohio does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Utah's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Applicants from jurisdictions DOPL has not determined equivalent, including the NASCLA examination route (all other states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
An applicant whose home jurisdiction is not shown in green on DOPL’s Endorsement to Utah: Contractor map takes the ordinary route, which for R100 involves no trade examination at all. The qualifier completes an approved 25-hour pre-licensure course plus the five-hour Business and Law course, passes the Utah Contractor Business and Law examination through Prov, and shows two years, meaning 4,000 hours, of paid work experience in the construction industry. That experience travels freely: it counts wherever it was earned, whether the qualifier was paid as a W-2 employee or as an owner and whether the work was licensed or exempt, and it is self-certified on the application rather than verified by an employer, so out-of-state years are not lost. A qualifier who has passed the NASCLA Accredited Examination for Commercial General Building Contractors does not have to document the two years at all: Utah Admin. Code R156-55a-302b(2)(b)(i) accepts a passing NASCLA score in place of the experience requirement for every general classification, R100 included, and the application has a box for it. A Construction Management degree or an active Utah professional engineer license does the same. NASCLA does not remove the Business and Law examination or the pre-licensure courses. Where the origin jurisdiction issues no equivalent state-wide license, DOPL will still look at a city or county license, or a non-equivalent state license, as evidence towards Utah’s qualifications if the applicant files a verification showing the hours, examinations and other qualifications behind it.
Two things on DOPL’s published materials do not line up, and both are worth a phone call to the Division on (801) 530-6628 before paying any fee. First, the Apply for a General Contractor License page lists, as an alternative to the Business and Law examination, "One (1) year of licensed experience working in another State, District or Territory of the U.S. in the similar scope of practice sought in Utah if the license is currently active and in good standing", with no mention of an equivalency list, while Utah Admin. Code R156-55a-302a(3) waives that examination only "for an applicant for licensure by endorsement under Section 58-1-302" and the application checklist limits endorsement to "a jurisdiction determined equivalent to Utah" on a map last updated 21 September 2020. Second, the current rule and both apply pages set general liability cover at $1,000,000 each incident and $2,000,000 in total, while the March 2026 application form prints a $3,000,000 aggregate. On the map itself, the jurisdictions shaded yellow as "Limited to Specific Classifications" (Colorado, Connecticut, Delaware, Idaho, Illinois, Indiana, Iowa, Kentucky, Maine, Missouri, Montana, Nebraska, New Hampshire, New Jersey, Ohio, Oklahoma, Texas, Vermont, Washington, Wisconsin, Wyoming and the District of Columbia) are ones DOPL says do not license contractors generally but may license a specific specialty such as electrical, plumbing, HVAC or elevator work, which is not an equivalent to a R100 license; the jurisdictions shaded grey as having no equivalent license are Kansas, New York, North Dakota, Pennsylvania, South Dakota, Puerto Rico and the Northern Mariana Islands. Utah Code 58-1-302(2) is written state-neutrally and turns on scope of practice rather than on any named partner, and the map ends by inviting applicants to contact the Division if licensure laws have changed, so an applicant from a yellow or grey jurisdiction holding a license of genuinely similar scope can ask DOPL to look again.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 4,000 hours of qualifying work experience.Utah Admin. Code R156-55a-302b(1) reads the requirement broadly: experience counts whether the qualifier was paid as a W-2 employee or as an owner and whether the work was licensed or exempt, and it includes construction work done in the military or for a railroad corporation and work done under a construction trades instructor as part of an educational program. It need not be supervisory and need not match the classification sought. An applicant who is a building inspector may substitute two years as a building inspector including one year as a licensed combination inspector, and an E100 applicant needs four years instead.
- You must have passed a licensing exam in Ohio that the destination considers comparable.Utah Admin. Code R156-55a-302b(2)(b)(i) states that a passing NASCLA score satisfies the experience requirement in Utah Code 58-55-302(1)(e)(ii)(A), and DOPL’s contracting FAQ repeats it in the same words. The rule is written for the general classifications as a group rather than for B100 alone, and both the apply page and the qualifier affidavit offer the NASCLA box to every general classification applicant, so it is available at this residential level too. NASCLA is an examination credential, not a license and not an interstate agreement, so any applicant may use it whatever state they come from. It waives nothing else: the pre-licensure courses, the Utah Contractor Business and Law examination, insurance, financial responsibility, registration, background checks and fees all still apply.
- The qualifier must be either an owner of at least 20 per cent of the licensee or a W-2 employee in a management position, and must be paid for at least 12 hours of work a week for the licensee. A qualifier may not qualify more than three licensees at one time without the written approval of the Commission and the Division.
What you'll do to get licensed in Utah
- 1Other. Approved pre-licensure education completed by the qualifier before applying: a 25-hour pre-licensure course plus the five-hour Business and Law course, 30 hours in total for a general classification. DOPL accepts the course only from Associated Builders and Contractors (ABC), the Utah Home Builders Association (UHBA) or the Associated General Contractors of Utah (AGC); a qualifier who completed the 25-hour course before 1 October 2019 does not need the extra five hours. The Division does not publish the providers’ course prices, so ask the provider..
- 2Law / code exam. Pass a law, rules, or code exam. Utah Contractor Business and Law examination, taken by the qualifier through Prov either at one of 21 Utah test centers or remotely through Prov’s Examroom service. It is 60 questions in two hours, open reference, and the cut score is 70 per cent; the subject areas are business organization, licensing, estimating and bidding, contract management, project management, labor laws, lien laws, financial management, risk management, tax laws and safety. No DOPL pre-approval is needed to sit it, and a failed attempt may be retaken after 30 days for each of the first three failures and after six months for any failure after that. Pass before submitting the application..
- 3Exam fee. Pay the exam fee ($85). Prov examination fee for the Utah Contractor Business and Law exam, paid to Prov and charged again for each retake..
- 4Application fee. Pay the application fee ($175). Non-refundable DOPL application processing fee of $175 for each classification requested (application version v20260327). A contractor asking for more than one classification pays it more than once..
- 5Application fee. Pay the application fee ($50). Non-refundable DOPL application processing fee of $50 for each qualifier named on the application..
- 6Application fee. Pay the application fee ($1). Electronic Reference Library surcharge of $1, collected on every application to fund licensee access to national, state and local building codes and standards. An unincorporated applicant also pays $20 for each owner holding less than 8 per cent, filed with the Appendix F Owner-Worker Status Report..
- 7Insurance. Carry the required insurance ($1,000,000). General liability insurance certificate naming DOPL as certificate holder, covering the whole scope of work on the license and in force for the entire duration of active licensure. Utah Admin. Code R156-55a-302d and both DOPL apply pages set the minimum at $1,000,000 for each incident and $2,000,000 in total; the March 2026 application form prints $3,000,000 as the aggregate, so confirm the figure with the Division on (801) 530-6628 before binding cover. The cover must be kept up even while the contractor is not working, unless the license is placed on inactive status..
- 8Insurance. Carry the required insurance. Workers’ compensation insurance naming DOPL as certificate holder if the applicant has employees or owner-workers holding less than 8 per cent, together with a Utah State Tax Commission withholding account number and a Department of Workforce Services unemployment registration number, or a signed contract with an approved Professional Employer Organization. An applicant with no employees files a Workers’ Compensation Coverage Waiver from the Utah Labor Commission instead and must tell DOPL in writing before any employee starts work..
- 9Financial responsibility. Show financial responsibility. Satisfactory evidence of financial responsibility. Utah Code 58-55-306 lets this be shown by completing and signing the Division’s financial responsibility questionnaire, which asks about judgments, liens, tax liens and child support delinquencies in the past eight years and bankruptcy in the past seven, or by posting a bond. DOPL publishes no minimum net worth, working capital or credit score, and it may audit at random or on reasonable need, weighing judgments, restitution orders, collection actions, bankruptcy schedules, late payment history, financial statements, tax returns and a current credit report. For an unincorporated applicant the Division considers each owner’s personal finances..
- 10Surety bond. Post a surety bond ($25,000) (if applicable). License bond, required only where the Division is not satisfied that financial responsibility has been demonstrated. Under Utah Admin. Code R156-55a-602 the minimum is then the greater of 30 per cent of the cumulative outstanding debts, judgments, liens and obligations of the entity, its owners and qualifiers, or $25,000 for the R100 classification. A bankruptcy filed, pending or discharged within three years instead sets it at 30 per cent of the total liabilities scheduled with the bankruptcy court. The surety must appear in Treasury Circular 570, the bond runs until DOPL gives written permission to drop it, and the Commission may set a higher or, on clear and convincing evidence, a lower amount..
- 11Business license. Obtain a business license. Registration with the Utah Division of Corporations and Commercial Code for any corporation, LLC, LLP or partnership, including an out-of-state entity, plus a federal Employer Identification Number; a sole proprietor may use a Social Security number and is licensed in their own given name. The license is issued in the registered legal name, business must be done in that name unless a DBA owned by the licensee is separately filed with DOPL, and if the corporate registration lapses the contractor license expires with it by statute..
- 12Background check. Complete a background check. Criminal background check under Utah Code 58-1-301.5 consented to and completed by the qualifier and by every individual holding at least a 10 per cent voting interest in the applicant, with disclosure of any criminal history the Division asks for. A yes answer on the qualifying questionnaire about discipline, pending criminal action, a misdemeanour in the past ten years or a felony at any time brings a requirement to file a personal account, police reports, court records and probation or parole reports for each incident..
- 13Continuing education. Complete continuing education. Six hours of approved continuing education in each two-year license term, of which at least three must be core education and at least three must be live in-class attendance, with no more than three hours online, and at least one hour in energy conservation. It is a condition of renewal rather than of getting the license. Licenses expire on 30 November of each odd-numbered year..
Published fees on this path total $311, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Other
- Law / code exam
- Exam fee · $85
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $1,000,000
- Insurance
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $25,000 · if applicable
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Utah licenses residential contractors
Utah residential contractor · “R100 Residential and Small Commercial Contractor”
Statewide license
Issued by Utah Division of Professional Licensing (DOPL)
Utah licenses contractors statewide through the Division of Professional Licensing (DOPL) under the Utah Construction Trades Licensing Act, Utah Code 58-55, and Rule R156-55a, and the homes tier is the R100 Residential and Small Commercial Contractor classification. Utah Code 58-55-102(42) defines it as the construction of single-family residences, multifamily residences up to four units, and commercial construction of not more than three stories above ground and not more than 20,000 square feet, together with any component of that construction except plumbing, electrical, mechanical and manufactured housing work, for which an R100 must employ a contractor licensed in the specialty; on single-family and multifamily residences up to four units the R100 may perform the mechanical work and employ a licensed plumber or electrician. Anything larger needs B100 General Building Contractor, and fixed works needing specialized engineering knowledge need E100 General Engineering Contractor. Smaller jobs can instead be taken under the specialty classifications, which need no experience and no examination: R101 Residential and Small Commercial Non-Structural Remodel and Repair (which may not be combined with any other specialty), R200 Factory Built Housing, B200 Modular Unit Installation and the S-series such as S220 Carpentry and Flooring, S270 Drywall, Paint and Plastering and S280 Roofing. The license belongs to the business, not the person: the entity applies and names a qualifier, an owner of at least 20 per cent or a W-2 employee in a management position paid for at least 12 hours a week, and that qualifier is the one who satisfies the course, experience and examination requirements. There is no Utah trade examination for R100; the only DOPL examination is the Utah Contractor Business and Law exam. Licenses expire on 30 November of each odd-numbered year and renewal takes six hours of continuing education.
Why Ohio has nothing to transfer
Ohio residential contractor · “Home improvement / remodeling contractor license or registration (city-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license and register residential contractors
Ohio issues no statewide residential building, home builder or home improvement contractor license. The Ohio Construction Industry Licensing Board (OCILB), in the Department of Commerce, licenses individual contractors in five commercial trades only - electrical, HVAC, refrigeration, plumbing and hydronics - and its own page states that "all local building and health departments regulate residential contractors"; the Department of Commerce says plainly that "while residential contractors are not required to be licensed by the state, local building departments throughout Ohio may have their own verification or licensing requirements." Housing work is therefore licensed or registered jurisdiction by jurisdiction, and the rules vary a great deal: Columbus and Toledo run real competency licenses built on the ICC Ohio home improvement and building contractor examination (exam ID 767-OH-GC), documented experience and a board hearing, while Cleveland, Cincinnati and Akron require registration backed by insurance, bonding or workers' compensation but no exam, and Dayton registers only the trades. A remodeler moving to Ohio has no state license to transfer and no state reciprocity to apply for, so the practical work is qualifying or registering in each place where they pull permits and carrying the insurance each one demands. The credential that actually travels is the ICC contractor examination rather than another state's license. Anyone who self-performs electrical, HVAC, refrigeration, plumbing or hydronics work still needs the matching OCILB state license, and Ohio's only statewide residential construction statute, R.C. Chapter 4722, governs written contracts and down payments on home construction service contracts over $25,000 rather than licensing anyone.
How local licensing works in Ohio
How local licensing works. Ohio has roughly 800 certified building departments, and each city, county or township decides for itself whether residential contractors are licensed, registered or left alone. A credential from one Ohio jurisdiction does not carry into the next one, and none of the jurisdictions below grants anything for a license held in another state. Use the Board of Building Standards jurisdiction map at com.ohio.gov/JurisdictionMap to find out which department has authority over a given address before applying anywhere.
Columbus. Building and Zoning Services licenses residential work under Chapter 4114 of the Columbus Building Code. A Home Improvement General Contractor license covers structural work on existing one-, two- and three-family dwellings and their accessory structures. It requires "a score of 70% or higher for 767 Ohio Home Improvement Contractor" (the ICC exam, booked through the International Code Council on (877) 783-3926), a "minimum of three (3) full years of hands-on experience in the one (1), two (2), and three (3) family home improvement field", and approval by the Board of Review of General and Home Improvement Contractors, which meets on the first Wednesday of each month and needs the notarized application at least seven days beforehand. A Home Improvement Limited Contractor license covers roofing, siding, decking, waterproofing, fencing, driveway approaches and similar specialized work and requires one full year of hands-on experience in that field plus board approval. A builder putting up new houses registers instead as a General Contractor, which covers "all permits to build new 1, 2, or 3 family, multi-family (4 or more dwelling units), and commercial structures" and needs a $25,000 bond on the city's bond form and liability insurance of at least $300,000 for damages to a single person and $500,000 per occurrence, with no exam. The 2026 fee schedule sets a $300 application fee for the board-reviewed licenses (including Home Improvement Contractor and HIC-Limited) and a $350 annual license and registration fee; a change of assignment is $100. Registrations expire at the end of the twelfth month from issuance. Building and Zoning Services, 111 North Front Street, (614) 645-7433, [email protected].
Toledo. The Division of Building Inspection licenses "contractors engaged in the business of making improvements to residential structures regulated by the Residential Code of Ohio" under Toledo Municipal Code Chapter 1313, in two tiers. A Certified Remodeling Contractor "may engage in all residential construction, alterations and renovations" and must first pass the ICC Building Contractor C examination (exam ID 767-OH-GC, delivered by Pearson VUE, nearest center in Maumee) and then the City of Toledo Certified Remodeling Exam covering Chapters 11 and 13 of the Municipal Code. A Limited Remodeling Contractor is "restricted to residential improvements such as roof and window replacement, siding application, installation of insulation, fencing, and swimming pools greater than 24 inches in depth" and sits only the city exam, which covers Chapter 13 and the 2024 International Residential Code. Both exams are open book. Applications go first to the city's Board of Control for Home Improvement and Remodeling Contractors, which decides whether the applicant may test, and the applicant must document one of four qualifications: a two-year degree in construction management, architecture or engineering; a licensed journeyman certificate in a construction trade; five years working in general building construction under a licensed remodeler, homebuilder or general contractor, evidenced by a notarized employer statement and five years of tax records; or five years self-employed on construction projects, evidenced by a notarized resume and five years of tax records. Three unrelated references and a full employment history are filed with the application. The fee is $200, of which $175 is refunded if the Board of Control finds the applicant unqualified to test. After passing, a Certificate of Compliance from the Division of Taxation is required before the license issues, and holders must carry liability insurance "in the amount of $100,000 to $300,000." Licenses renew annually and expire December 31; ten hours of continuing education are required each year. One Government Center, Suite 1600, 419-245-1220.
Cleveland. The Department of Building & Housing states that "to build or rehabilitate Cleveland homes, contractors must be bonded, insured, and registered", and that "contractors must be registered with the City of Cleveland within their trade in order to obtain permits. Separate permits are required for each separate trade, i.e. general, plumbing, HVAC, electrical, and elevator." Registration runs under Chapter 3107 of the Codified Ordinances, Registration of Contractors, which provides for both a Certificate of Registration and a Limited Certificate of Registration and sets separate qualifications for each. The city publishes a General Contractor Registration Application package in the Contractor Packages section of its construction permitting resources page; the bond amount, insurance limits and fee are set out in that package and in Chapter 3107 rather than on the department's web pages, so confirm them with Building & Housing on 216-664-2910 before filing. Registration status can be checked on 216-664-2884. Electrical, plumbing and HVAC contractors must hold the OCILB state license before the city will register them.
Cincinnati. The Department of Buildings & Inspections registers contractors under Chapter 1106 of the Municipal Code in three classes, two of which reach housing. A Home Improvement Contractor registration covers "all contractors that are involved in repair, remodeling, alteration, improvement, or addition to any building used as a private residence in one, two and three family structures." A Building Construction Contractor registration covers everything else, and expressly "include[s] contractors that engage in the construction of new one, two and three family dwellings" as well as specialties such as demolition, carpentry, masonry and glazing. The filing is the signed application, a certificate of liability insurance from an Ohio-licensed insurer with "minimum liability limits of one hundred thousand dollars ($100,000) for damages to a single person, and three hundred thousand dollars ($300,000) for one (1) occurrence", proof of Ohio workers' compensation, an assignment form naming everyone allowed to sign permit applications, and a federal tax ID or Social Security number. The fee is $125.00 plus a 3% technology surcharge, a 1% financial recovery fee and a 1% training surcharge, a total of $131.25 a year, and a registration may be bought for up to three years; same-day processing costs $208 more and mid-term changes $78. There is no exam, experience or bond requirement. An owner of a one-, two- or three-family dwelling is exempt where they personally perform the work and will occupy the home for at least a year. Working unregistered draws a $750 citation for a first offense. 805 Central Avenue, Suite 500, (513) 352-3271.
Akron and Summit County. Akron's rule is short: "the City of Akron requires all contractors regardless of trade to register as a contractor if the work they are performing requires a permit to do the work." The filing is the contractor registration application, an Akron Tax Registration Number, a certificate of liability insurance, any state licenses the trade requires, and proof of workers' compensation unless there are no employees. There is no exam and no published registration fee. The building permits themselves come from the Summit County Department of Building Standards, which in March 2024 replaced annual contractor registration with a permit-based process: "the $135 annual fee for contractors and the requirement for a $10,000 bond are now eliminated", though "contractors will still be required to provide liability insurance, State license if applicable, and a Tax ID Number." The same code change requires that property owners working on homes they do not and will not occupy have a qualified contractor take responsibility for the installations. Akron Plans & Permits, 1030 E. Tallmadge Ave., 330-375-2010; registration questions 330-375-2037. Summit County Building Standards, same address, 330-630-7280.
Dayton. The Division of Building Inspection publishes registration and bond forms only for electrical, plumbing, warm air heating and pipe-laying contractors, with separate plumbing journeyman and apprentice forms. There is no Dayton registration for a remodeler or a homebuilder as such; a residential builder pulls permits and hires or employs the registered trades. Building Inspection, 937-333-3979; One Stop Center, 371 West Second Street, second floor, 937-333-3883.
Cuyahoga County. The county created a Division of Building Standards in 2025 "with the mission of improving compliance with State of Ohio Board of Building Standards for both residential and commercial/non-residential construction within the County." It will provide contractor registration, plan review, permitting and inspections for partner communities, with registration "completed through a secure online portal" on its website; the partner community list is still being announced and an approved fee schedule is due by December 1, 2026. The county notes that it "does not offer formal endorsement, evaluation, or recommendation of any contractors or construction services" and directs residents to the state's building department look-up tool for their address. [email protected].
Everywhere else. The remaining hundreds of Ohio municipalities, townships and county building departments each set their own rules, from a full licensing board to nothing beyond a permit and proof of insurance. Identify the department with jurisdiction over the address first, then ask what it registers. Whatever the local answer, the statewide obligations are the same: an OCILB license for any self-performed electrical, HVAC, refrigeration, plumbing or hydronics work, and a written contract meeting R.C. Chapter 4722 for any home construction service contract over $25,000.
- Columbus (Building and Zoning Services - Home Improvement General and Limited Contractor licenses)
- Cleveland (Department of Building & Housing - contractor registration under Codified Ordinances ch. 3107)
- Cincinnati (Buildings & Inspections - Home Improvement and Building Construction contractor registration)
- Toledo (Division of Building Inspection - Certified and Limited Home Improvement and Remodeling Contractor licenses)
- Akron (Engineering Bureau - contractor registration for any permitted work)
- Summit County (Department of Building Standards - permit-based contractor process; issues Akron's building permits)
- Dayton (Division of Building Inspection - trade contractor registration only)
- Cuyahoga County (Division of Building Standards - contractor registration for partner communities)
Common questions
- Do I have to take the Utah residential contractor exam if I'm licensed in Ohio?
- The trade exam is waived, but Utah requires a law or code exam.
- What does it cost to get a Utah residential contractor license from Ohio?
- Published fees on this path total $311, not counting exam vendor fees or bonds.
- Do my Ohio work hours count in Utah?
- Yes. Documented out-of-state experience counts toward Utah's eligibility requirements.
- Does it work the other way, from Utah to Ohio?
- Not necessarily. Reciprocity is directed. Going from Utah to Ohio, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- Utah Code 58-1-302 - License by endorsement · Utah Code 58-1-302(2) · Utah State Legislature · Statute · verified September 17, 2026
- Utah Code 58-55-102 - Definitions (Utah Construction Trades Licensing Act) · Utah Code 58-55-102(20), (26), (42) · Utah State Legislature · Statute · verified September 17, 2026
- Utah Code 58-55-302 - Qualifications for licensure · Utah Code 58-55-302(1)(c)(ii), (1)(e)(ii), (1)(e)(iii), (1)(e)(iv), (1)(e)(vii), (2)(b) · Utah State Legislature · Statute · verified September 17, 2026
- Utah Code 58-55-306 - Financial responsibility · Utah Code 58-55-306 · Utah State Legislature · Statute · verified September 17, 2026
- Utah Contractor Application - All Classifications (with qualifier affidavit, checklist and fee table) · Utah Code 58-55-306; Utah Admin. Code R156-1-301, R156-55a-602 · Utah Division of Professional Licensing (DOPL) · Form · verified September 17, 2026
- Endorsement to Utah: Contractor (state-by-state equivalency map) · Utah Code 58-55; 58-1-302 · Utah Division of Professional Licensing (DOPL) · Other · verified September 17, 2026
- Utah DOPL - Contracting licensing home page · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 17, 2026
- Utah DOPL - Contracting Continuing Education · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 17, 2026
- Utah DOPL - Contracting Exam Information · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 17, 2026
- Contracting Frequently Asked Questions (DOPL) · Utah Division of Professional Licensing (DOPL) · Faq · verified September 17, 2026
- Apply for a General Contractor License (DOPL) · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 17, 2026
- Apply for a Specialty Contractor License (DOPL) · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 17, 2026
- State of Utah Contracting Exam - Examination Handbook (Prov, for DOPL) · Prov, Inc., examination administrator for the Utah Division of Professional Licensing · Other · verified September 17, 2026
- Utah Admin. Code R156-55a - Utah Construction Trades Licensing Act Rule · Utah Admin. Code R156-55a-301c, -301h, -302a, -302b, -302d, -302f, -303a, -303b, -304, -306, -602 · Utah Office of Administrative Rules · Admin Rule · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.