Ohio to Wisconsin: residential contractor license reciprocity
Ohio does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Wisconsin's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
No credit for an out-of-state contractor license (every state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Wisconsin publishes no reciprocity, endorsement or exam-waiver route for contractors, and a residential builder's license from another state earns no credit toward either Wisconsin credential. The only reciprocity provision in the DSPS trades rules, SPS 305.47, is limited to electricians and electrical contractors under Wis. Stat. 101.874, and the service-member and spouse reciprocal credential in Wis. Stat. 440.09 reaches only credentials issued under chapters 440 to 480, which does not include these chapter 101 trades certifications. There is also nothing to waive on the examination side: DSPS administers no examination for the dwelling credentials, and the fee table in SPS 305.02 carries no examination fee for any of them. An applicant arriving from any state therefore takes exactly the route a Wisconsin resident takes: 12 hours of an approved initial qualifier course finished within the year before applying for the Qualifier certification, and bond or liability insurance plus the worker's compensation and unemployment compensation attestations for the Dwelling Contractor certification, both filed in LicensE at license.wi.gov. Wisconsin sets no minimum years of experience and no apprenticeship for either credential, so documented out-of-state work neither shortens nor replaces a step, and several approved qualifier courses are delivered online, which means the course can be taken before the move.
The law exam flag here means the tests built into the approved 12-hour initial qualifier course, which Wis. Admin. Code SPS 305.315(2)(c) requires to cover construction laws, construction codes and construction business practices. DSPS itself gives no proctored trade or business-and-law examination for these credentials. Wis. Stat. 101.654(1m)(b)3. separately provides for an examination developed by the department on the required continuing education courses for anyone who did not hold a certificate of financial responsibility on 11 April 2006; SPS 305.02's fee table shows no examination fee for the dwelling credentials and neither DSPS form mentions a test date, so ask DSPS on (608) 266-2112 how that provision is applied before you plan around it. Wis. Stat. 101.654(3)(a)3., added in 2021, also requires 12 hours of department-approved education on accounting, lien law, ethics and best business practices for the certificate of financial responsibility; the Dwelling Contractor page and Form 3096 describe only the financial-responsibility and attestation items, so confirm with DSPS which course satisfies it. A contractor who already holds a current DSPS trades license and pulls a permit for work that license covers is exempt from the continuing education requirement under Wis. Stat. 101.654(1)(c)2.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Do not count
What you must already have
- The approved 12-hour initial qualifier course in dwelling construction must have been completed within one year before the date of the Dwelling Contractor Qualifier application. A course finished earlier than that does not count and has to be retaken.Wis. Admin. Code SPS 305.315(2)(c) and DSPS Form 3097. Verification of completion is uploaded with the application in LicensE.
- Wisconsin sets no minimum trade experience, apprenticeship or period of prior licensure for either dwelling credential, and credits nothing toward them for an out-of-state contractor license, an out-of-state examination or documented out-of-state projects.Neither Wis. Stat. 101.654 nor Wis. Admin. Code SPS 305.31 and SPS 305.315 contains an experience requirement or an out-of-state recognition clause, and DSPS Forms 3096 and 3097 list no experience table and no reciprocity category. Wisconsin also does not accept the NASCLA Accredited Examination, which is not surprising given that it holds no examination of its own here.
- The Dwelling Contractor certification is applied for by a named principal: the owner of the contracting business, a partner applying on behalf of a partnership, or the chairman of the board or chief executive officer applying on behalf of a corporation.Wis. Admin. Code SPS 305.31(3)(b) and DSPS Form 3096, item 2. Under SPS 305.02(4)(a) a business operating from several locations under one federal employer identification number needs only one dwelling contractor certification.
What you'll do to get licensed in Wisconsin
- 1Law / code exam. Pass a law, rules, or code exam. At least 12 hours in a DSPS-approved initial qualifier course in dwelling construction, completed within one year before the Dwelling Contractor Qualifier application. The course must include instruction and one or more tests on construction laws, construction codes and construction business practices. DSPS publishes a list of approved course providers rather than individual courses, and directs questions about a course to the provider; several providers deliver the 12 hours online, so it can be finished before you move to Wisconsin. DSPS holds no examination of its own for this credential and charges no examination fee for it..
- 2Application fee. Pay the application fee ($15). Application fee for the Dwelling Contractor Qualifier certification, set at $15 by Wis. Admin. Code SPS 305.02, Table 305.02. Fees are calculated and paid in LicensE at license.wi.gov when the application is filed..
- 3License fee. Pay the license or certificate fee ($30). Certification fee for the Dwelling Contractor Qualifier, $30 under Table 305.02. The Qualifier certification runs for two years from the date of issuance (Table 305.06) and renews for $30, with a $25 late continuing education fee where that applies and a $200 reinstatement fee if it has lapsed..
- 4Application fee. Pay the application fee ($15). Application fee for the Dwelling Contractor certification, set at $15 by Table 305.02. It is separate from the Qualifier application fee, because a contractor who is both the business principal and the qualifier is applying for two credentials..
- 5License fee. Pay the license or certificate fee ($25). Certification fee for the Dwelling Contractor certification, $25 under Table 305.02, and the same $25 for the Dwelling Contractor Restricted version. The certification is valid for one year from the date of issuance and renews annually for $25; a certification expired more than a year needs a fresh application, supporting documents and a $200 reinstatement fee..
- 6Insurance. Carry the required insurance. Proof of financial responsibility, satisfied either by a general liability policy insuring the applicant for at least $250,000 per occurrence for bodily injury to or death of others or damage to the property of others, or by the surety bond below. The insurer must be authorized to do business in Wisconsin or eligible as a surplus lines insurer in one or more states. The policy may not be canceled except on 30 days' written notice to DSPS, or 10 days for nonpayment of premium, and proof of replacement cover must be filed inside that window or DSPS suspends the certification without a hearing. The application also carries attestations that the business complies with Wisconsin worker's compensation law (Wis. Stat. ch. 102) and unemployment compensation law (Wis. Stat. ch. 108)..
- 7Surety bond. Post a surety bond (if applicable). A surety bond endorsed by a company authorized to do business in Wisconsin is the alternative to the liability policy. DSPS's Form 3096 asks for a bond of at least $25,000 for the full Dwelling Contractor certification; the statutory floor in Wis. Stat. 101.654(2)(a)1. is $5,000, and an applicant using a bond of less than $25,000 is issued the Dwelling Contractor Restricted certification instead and agrees not to work on any dwelling whose estimated cost of completion is greater than the bond amount. The bond runs in the name of the state for the benefit of anyone who suffers a loss from a breach of the one- and two-family dwelling code, and carries the same 30-day cancellation notice rule as the insurance policy..
- 8Continuing education. Complete continuing education. At least 12 hours of DSPS-approved continuing education before the Qualifier certification expires. Wis. Stat. 101.654(1m)(b)1. requires those 12 hours every two years and requires at least 4 of them to be on construction laws and codes and on contracts, liability and risk management. Credit comes from seminars and workshops attended in person or by remote classroom, from teaching a program (first offering only), from webinars and other distance courses, and from technical or professional society meetings, which are capped at 6 hours per renewal cycle. A distance course needs at least 10 review questions per credit hour, and a question-and-answer course at least 30 questions per credit hour with a passing score of 70 percent. DSPS may approve continuing education courses offered by other states..
- 9Background check. Complete a background check. DSPS Form 2255, Trades Convictions and Pending Charges, is filed with the application where it applies. Wis. Stat. 101.654(5) lets the department revoke or suspend the certification for a conviction of a crime related to the construction of a dwelling, for building without a required permit, for failing the continuing education requirement, or for having been adjudged bankrupt on two or more occasions..
- 10Other. Both applications are filed in the LicensE portal at license.wi.gov, with the initial qualifier course verification and the bond or insurance certificate uploaded there; anything DSPS asks for later must be uploaded within three months or the application may have to be refiled and the fees paid again. Once certified, the holder may not start construction until the uniform building permit under SPS 320.08 is issued by the municipality, and may not start a private onsite wastewater treatment system until the sanitary permit under SPS 383.21 is issued. Milwaukee adds a City of Milwaukee Home Improvement Contractor License for work on single-family homes, duplexes and apartment buildings of six units or fewer, so check the requirements of the city or county that will issue your permits as well..
Published fees on this path total $85, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Wisconsin licenses residential contractors
Wisconsin residential contractor · “Dwelling Contractor certification, with a Dwelling Contractor Qualifier”
Statewide license
Issued by Wisconsin Department of Safety and Professional Services (DSPS)
Wisconsin licenses housebuilding statewide through the Department of Safety and Professional Services, and it takes two separate credentials rather than one. Under Wis. Admin. Code SPS 305.31 no person may obtain a building permit for a one- or two-family dwelling unless that person holds a Dwelling Contractor certification (or a Dwelling Contractor Restricted certification) and holds, or employs, someone who holds a Dwelling Contractor Qualifier certification. The Dwelling Contractor certification is the business-side credential: it is applied for by the owner of the contracting business, a partner on behalf of a partnership, or the chairman of the board or chief executive officer on behalf of a corporation, and it is granted on attestations of worker's compensation and unemployment compensation compliance plus proof of financial responsibility, which is either a surety bond or a general liability policy of at least $250,000 per occurrence. The Dwelling Contractor Qualifier certification is the personal credential and the one that carries the coursework and the testing: the applicant must have completed at least 12 hours in a DSPS-approved initial qualifier course in dwelling construction within the year before applying, and that course must include one or more tests on construction laws, construction codes and construction business practices. A contractor moving to Wisconsin to build or remodel houses normally needs both, files both in the LicensE portal at license.wi.gov, and should note that these credentials reach one- and two-family dwellings only. Wisconsin issues no state license for general or commercial building work, and a homeowner who lives or will live in the dwelling is exempt from the Dwelling Contractor requirement for work on their own home.
Why Ohio has nothing to transfer
Ohio residential contractor · “Home improvement / remodeling contractor license or registration (city-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license and register residential contractors
Ohio issues no statewide residential building, home builder or home improvement contractor license. The Ohio Construction Industry Licensing Board (OCILB), in the Department of Commerce, licenses individual contractors in five commercial trades only - electrical, HVAC, refrigeration, plumbing and hydronics - and its own page states that "all local building and health departments regulate residential contractors"; the Department of Commerce says plainly that "while residential contractors are not required to be licensed by the state, local building departments throughout Ohio may have their own verification or licensing requirements." Housing work is therefore licensed or registered jurisdiction by jurisdiction, and the rules vary a great deal: Columbus and Toledo run real competency licenses built on the ICC Ohio home improvement and building contractor examination (exam ID 767-OH-GC), documented experience and a board hearing, while Cleveland, Cincinnati and Akron require registration backed by insurance, bonding or workers' compensation but no exam, and Dayton registers only the trades. A remodeler moving to Ohio has no state license to transfer and no state reciprocity to apply for, so the practical work is qualifying or registering in each place where they pull permits and carrying the insurance each one demands. The credential that actually travels is the ICC contractor examination rather than another state's license. Anyone who self-performs electrical, HVAC, refrigeration, plumbing or hydronics work still needs the matching OCILB state license, and Ohio's only statewide residential construction statute, R.C. Chapter 4722, governs written contracts and down payments on home construction service contracts over $25,000 rather than licensing anyone.
How local licensing works in Ohio
How local licensing works. Ohio has roughly 800 certified building departments, and each city, county or township decides for itself whether residential contractors are licensed, registered or left alone. A credential from one Ohio jurisdiction does not carry into the next one, and none of the jurisdictions below grants anything for a license held in another state. Use the Board of Building Standards jurisdiction map at com.ohio.gov/JurisdictionMap to find out which department has authority over a given address before applying anywhere.
Columbus. Building and Zoning Services licenses residential work under Chapter 4114 of the Columbus Building Code. A Home Improvement General Contractor license covers structural work on existing one-, two- and three-family dwellings and their accessory structures. It requires "a score of 70% or higher for 767 Ohio Home Improvement Contractor" (the ICC exam, booked through the International Code Council on (877) 783-3926), a "minimum of three (3) full years of hands-on experience in the one (1), two (2), and three (3) family home improvement field", and approval by the Board of Review of General and Home Improvement Contractors, which meets on the first Wednesday of each month and needs the notarized application at least seven days beforehand. A Home Improvement Limited Contractor license covers roofing, siding, decking, waterproofing, fencing, driveway approaches and similar specialized work and requires one full year of hands-on experience in that field plus board approval. A builder putting up new houses registers instead as a General Contractor, which covers "all permits to build new 1, 2, or 3 family, multi-family (4 or more dwelling units), and commercial structures" and needs a $25,000 bond on the city's bond form and liability insurance of at least $300,000 for damages to a single person and $500,000 per occurrence, with no exam. The 2026 fee schedule sets a $300 application fee for the board-reviewed licenses (including Home Improvement Contractor and HIC-Limited) and a $350 annual license and registration fee; a change of assignment is $100. Registrations expire at the end of the twelfth month from issuance. Building and Zoning Services, 111 North Front Street, (614) 645-7433, [email protected].
Toledo. The Division of Building Inspection licenses "contractors engaged in the business of making improvements to residential structures regulated by the Residential Code of Ohio" under Toledo Municipal Code Chapter 1313, in two tiers. A Certified Remodeling Contractor "may engage in all residential construction, alterations and renovations" and must first pass the ICC Building Contractor C examination (exam ID 767-OH-GC, delivered by Pearson VUE, nearest center in Maumee) and then the City of Toledo Certified Remodeling Exam covering Chapters 11 and 13 of the Municipal Code. A Limited Remodeling Contractor is "restricted to residential improvements such as roof and window replacement, siding application, installation of insulation, fencing, and swimming pools greater than 24 inches in depth" and sits only the city exam, which covers Chapter 13 and the 2024 International Residential Code. Both exams are open book. Applications go first to the city's Board of Control for Home Improvement and Remodeling Contractors, which decides whether the applicant may test, and the applicant must document one of four qualifications: a two-year degree in construction management, architecture or engineering; a licensed journeyman certificate in a construction trade; five years working in general building construction under a licensed remodeler, homebuilder or general contractor, evidenced by a notarized employer statement and five years of tax records; or five years self-employed on construction projects, evidenced by a notarized resume and five years of tax records. Three unrelated references and a full employment history are filed with the application. The fee is $200, of which $175 is refunded if the Board of Control finds the applicant unqualified to test. After passing, a Certificate of Compliance from the Division of Taxation is required before the license issues, and holders must carry liability insurance "in the amount of $100,000 to $300,000." Licenses renew annually and expire December 31; ten hours of continuing education are required each year. One Government Center, Suite 1600, 419-245-1220.
Cleveland. The Department of Building & Housing states that "to build or rehabilitate Cleveland homes, contractors must be bonded, insured, and registered", and that "contractors must be registered with the City of Cleveland within their trade in order to obtain permits. Separate permits are required for each separate trade, i.e. general, plumbing, HVAC, electrical, and elevator." Registration runs under Chapter 3107 of the Codified Ordinances, Registration of Contractors, which provides for both a Certificate of Registration and a Limited Certificate of Registration and sets separate qualifications for each. The city publishes a General Contractor Registration Application package in the Contractor Packages section of its construction permitting resources page; the bond amount, insurance limits and fee are set out in that package and in Chapter 3107 rather than on the department's web pages, so confirm them with Building & Housing on 216-664-2910 before filing. Registration status can be checked on 216-664-2884. Electrical, plumbing and HVAC contractors must hold the OCILB state license before the city will register them.
Cincinnati. The Department of Buildings & Inspections registers contractors under Chapter 1106 of the Municipal Code in three classes, two of which reach housing. A Home Improvement Contractor registration covers "all contractors that are involved in repair, remodeling, alteration, improvement, or addition to any building used as a private residence in one, two and three family structures." A Building Construction Contractor registration covers everything else, and expressly "include[s] contractors that engage in the construction of new one, two and three family dwellings" as well as specialties such as demolition, carpentry, masonry and glazing. The filing is the signed application, a certificate of liability insurance from an Ohio-licensed insurer with "minimum liability limits of one hundred thousand dollars ($100,000) for damages to a single person, and three hundred thousand dollars ($300,000) for one (1) occurrence", proof of Ohio workers' compensation, an assignment form naming everyone allowed to sign permit applications, and a federal tax ID or Social Security number. The fee is $125.00 plus a 3% technology surcharge, a 1% financial recovery fee and a 1% training surcharge, a total of $131.25 a year, and a registration may be bought for up to three years; same-day processing costs $208 more and mid-term changes $78. There is no exam, experience or bond requirement. An owner of a one-, two- or three-family dwelling is exempt where they personally perform the work and will occupy the home for at least a year. Working unregistered draws a $750 citation for a first offense. 805 Central Avenue, Suite 500, (513) 352-3271.
Akron and Summit County. Akron's rule is short: "the City of Akron requires all contractors regardless of trade to register as a contractor if the work they are performing requires a permit to do the work." The filing is the contractor registration application, an Akron Tax Registration Number, a certificate of liability insurance, any state licenses the trade requires, and proof of workers' compensation unless there are no employees. There is no exam and no published registration fee. The building permits themselves come from the Summit County Department of Building Standards, which in March 2024 replaced annual contractor registration with a permit-based process: "the $135 annual fee for contractors and the requirement for a $10,000 bond are now eliminated", though "contractors will still be required to provide liability insurance, State license if applicable, and a Tax ID Number." The same code change requires that property owners working on homes they do not and will not occupy have a qualified contractor take responsibility for the installations. Akron Plans & Permits, 1030 E. Tallmadge Ave., 330-375-2010; registration questions 330-375-2037. Summit County Building Standards, same address, 330-630-7280.
Dayton. The Division of Building Inspection publishes registration and bond forms only for electrical, plumbing, warm air heating and pipe-laying contractors, with separate plumbing journeyman and apprentice forms. There is no Dayton registration for a remodeler or a homebuilder as such; a residential builder pulls permits and hires or employs the registered trades. Building Inspection, 937-333-3979; One Stop Center, 371 West Second Street, second floor, 937-333-3883.
Cuyahoga County. The county created a Division of Building Standards in 2025 "with the mission of improving compliance with State of Ohio Board of Building Standards for both residential and commercial/non-residential construction within the County." It will provide contractor registration, plan review, permitting and inspections for partner communities, with registration "completed through a secure online portal" on its website; the partner community list is still being announced and an approved fee schedule is due by December 1, 2026. The county notes that it "does not offer formal endorsement, evaluation, or recommendation of any contractors or construction services" and directs residents to the state's building department look-up tool for their address. [email protected].
Everywhere else. The remaining hundreds of Ohio municipalities, townships and county building departments each set their own rules, from a full licensing board to nothing beyond a permit and proof of insurance. Identify the department with jurisdiction over the address first, then ask what it registers. Whatever the local answer, the statewide obligations are the same: an OCILB license for any self-performed electrical, HVAC, refrigeration, plumbing or hydronics work, and a written contract meeting R.C. Chapter 4722 for any home construction service contract over $25,000.
- Columbus (Building and Zoning Services - Home Improvement General and Limited Contractor licenses)
- Cleveland (Department of Building & Housing - contractor registration under Codified Ordinances ch. 3107)
- Cincinnati (Buildings & Inspections - Home Improvement and Building Construction contractor registration)
- Toledo (Division of Building Inspection - Certified and Limited Home Improvement and Remodeling Contractor licenses)
- Akron (Engineering Bureau - contractor registration for any permitted work)
- Summit County (Department of Building Standards - permit-based contractor process; issues Akron's building permits)
- Dayton (Division of Building Inspection - trade contractor registration only)
- Cuyahoga County (Division of Building Standards - contractor registration for partner communities)
Common questions
- Do I have to take the Wisconsin residential contractor exam if I'm licensed in Ohio?
- The trade exam is waived, but Wisconsin requires a law or code exam.
- What does it cost to get a Wisconsin residential contractor license from Ohio?
- Published fees on this path total $85, not counting exam vendor fees or bonds.
- Do my Ohio work hours count in Wisconsin?
- No. Wisconsin does not credit out-of-state hours on this path.
- Does it work the other way, from Wisconsin to Ohio?
- Not necessarily. Reciprocity is directed. Going from Wisconsin to Ohio, the mechanism is not applicable.
Sources
- City of Milwaukee Department of Neighborhood Services - Contractors: credentials required before permit issuance · Milwaukee Code of Ordinances 95-14 · City of Milwaukee Department of Neighborhood Services · Other · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors - participating state agencies · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- Wisconsin DSPS - Approved Dwelling Contractor Qualifier Initial Qualifier Courses (provider list) · Wisconsin Department of Safety and Professional Services · Other · verified September 17, 2026
- Wisconsin DSPS - Dwelling Contractor · Wis. Admin. Code SPS 305.31; Wis. Stat. 101.654(1)(b), (1)(c)2. · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
- Wisconsin DSPS - Dwelling Contractor Qualifier · Wis. Admin. Code SPS 305.31, SPS 305.315; Wis. Stat. 101.654 · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
- Wisconsin DSPS - Dwelling Contractor Restricted · Wis. Admin. Code SPS 305.31; Wis. Stat. 101.654(2m) · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
- Wisconsin DSPS Form 3096 - Dwelling Contractor Application Information · Wisconsin Department of Safety and Professional Services · Form · verified September 17, 2026
- Wisconsin DSPS Form 3097 - Dwelling Contractor Qualifier Application Information · Wisconsin Department of Safety and Professional Services · Form · verified September 17, 2026
- Wisconsin DSPS - Trades Renewal Dates and Fees · Wisconsin Department of Safety and Professional Services · Other · verified September 17, 2026
- Wis. Admin. Code SPS 305.31 Dwelling contractor and SPS 305.315 Dwelling contractor qualifier · Wis. Admin. Code SPS 305.31, SPS 305.315 · Wisconsin Legislature · Admin Rule · verified September 17, 2026
- Wis. Admin. Code ch. SPS 305 - Licenses, Certifications and Registrations (Table 305.02 fees, Table 305.06 terms, SPS 305.47) · Wis. Admin. Code SPS 305.02 Table 305.02; SPS 305.06 Table 305.06; SPS 305.47 · Wisconsin Legislature · Admin Rule · verified September 17, 2026
- Wis. Stat. 101.654 - Contractor certification; education · Wis. Stat. 101.654 · Wisconsin Legislature · Statute · verified September 17, 2026
- Wis. Stat. 440.01 - Definitions (scope of "credential" for the ch. 440 reciprocal-credential provisions) · Wis. Stat. 440.01(2)(a); cf. Wis. Stat. 440.09 · Wisconsin Legislature · Statute · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.