South Dakota to California: residential contractor license reciprocity
South Dakota does not issue a statewide residential contractor license, so there is nothing to transfer. Here is California's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Original B-2 application: out-of-state experience counts, both examinations required
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
CSLB publishes no trade examination waiver for the B-2 Residential Remodeling classification except for holders of a North Carolina Building Contractor license, so an applicant arriving from any other state files the Application for Original Contractor's License, pays the $450 processing fee and sits both the Law and Business examination and the B-2 trade examination through PSI. Work done in another state does count toward eligibility: the qualifying individual must show at least four years of experience within the past 10 years as a journeyperson, foreperson, supervising employee or contractor in the classification applied for, and Business and Professions Code section 7068(h) directs the registrar to review experience gained in other states and confirm it was gained lawfully there. Those claims go on a Certification of Work Experience form completed by someone with firsthand knowledge of the work, and CSLB may ask for documents to back them up. The NASCLA Commercial General Builders examination waiver that CSLB accepts from applicants in any state applies only to the CSLB General Building classification, not to B-2. Once CSLB accepts the application you have 18 months to pass both examinations, after which the application is void and you must file again with new fees.
California sets no net worth, working capital or financial statement requirement for a contractor license. The financial solvency section of the Contractors State License Law, Business and Professions Code section 7067.5, was repealed effective January 1, 2016 and the matching regulation on operating capital was repealed in 2016; the $25,000 contractor bond stands in its place. CSLB does not publish an end-to-end processing time from application to issued license, only the date each unit is currently working on, updated weekly on its Processing Times page. Questions about the B-2 classification or an application in progress go to the Licensing Information Center on (800) 321-CSLB (2752).
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 4 years of qualifying work experience.Journey-level means a worker who has completed an apprenticeship or is an experienced worker, not a trainee, and is fully qualified to perform the trade without supervision. Technical training, apprenticeship training or education can be credited in place of part of the four years, but at least one year must be practical experience and the training or education must be documented with apprenticeship certificates or college transcripts. The experience section of the application must be completed even by applicants who expect an examination waiver.
- Experience earned outside California counts. Business and Professions Code section 7068(h) requires the registrar to review experience gained by applicants from other states and to determine that all of it was gained in a lawful manner in that state, so work performed where a license was required but not held may be rejected.
- The qualifying individual is at least 18 years old and has a Social Security number or an Individual Taxpayer Identification Number. A qualifying individual may not hold another active contractor's license while acting as qualifier, except as allowed by Business and Professions Code section 7068.1.
What you'll do to get licensed in California
- 1Application fee. Pay the application fee ($450). Non-refundable original application fee of $450, covering one classification, payable with the Application for Original Contractor's License. Adding a second classification on the same original application costs $150..
- 2License fee. Pay the license or certificate fee ($200). Initial license fee of $200 for a sole owner, or $350 for a non-sole owner, paid after the examinations are passed and the remaining issuance documents are filed. It buys a two-year license. CSLB's own worked total for one classification is $650 for a sole owner and $800 for a non-sole owner, application fee included..
- 3Trade exam. Pass the destination's trade exam. B-2 Residential Remodeling trade examination, administered for CSLB by PSI Exams. It is not waived on this path. You have 18 months after CSLB accepts the application to pass it and the Law and Business examination; passing scores stay good for five years..
- 4Law / code exam. Pass a law, rules, or code exam. CSLB Law and Business examination, administered by PSI Exams. Every original applicant takes it, including anyone whose trade examination is waived by reciprocity..
- 5Exam fee. Pay the exam fee. Rescheduling and re-examination fees are paid directly to PSI each time. CSLB does not publish the amounts on its fee list; they are in the Candidate Information Bulletin PSI sends with the Notice to Schedule an Examination, or ask CSLB on (800) 321-CSLB (2752)..
- 6Background check. Complete a background check. Mandatory criminal background check by Live Scan fingerprinting after CSLB accepts the application. Paid to the Live Scan operator: $32 to the Department of Justice and $17 to the Federal Bureau of Investigation, plus a rolling fee that each site sets for itself and CSLB does not set..
- 7Surety bond. Post a surety bond ($25,000). Contractor's bond of $25,000, required by Business and Professions Code section 7071.6 before CSLB can issue an active license. It must be written by a surety licensed through the California Department of Insurance on a form approved by the Attorney General's Office, must name the business exactly as CSLB records it, and must reach CSLB headquarters within 90 days of its effective date. A cashier's check may be filed instead..
- 8Surety bond. Post a surety bond ($25,000) (if applicable). Bond of Qualifying Individual, $25,000, required by Business and Professions Code section 7071.9 when the license is qualified by a responsible managing employee, or by a responsible managing officer who owns less than 10 percent of the corporation's voting stock. An RMO who owns 10 percent or more files a Bond of Qualifying Individual Exemption Certification instead. Each RME or RMO on a license must comply separately..
- 9Surety bond. Post a surety bond ($100,000) (if applicable). LLC employee/worker bond of $100,000, required by Business and Professions Code section 7071.6.5 only where the license is held by a limited liability company. It is in addition to the $25,000 contractor bond and protects employees against unpaid wages, interest on wages, fringe benefits and other contributions..
- 10Insurance. Carry the required insurance ($1,000,000) (if applicable). Liability insurance of at least $1,000,000 cumulative, required by Business and Professions Code section 7071.19 only where the license is held by a limited liability company with five or fewer people listed as personnel of record. Each additional member of the personnel of record adds $100,000, capped at $5,000,000. The policy must be written by an insurer licensed in California or an eligible surplus line insurer..
- 11Insurance. Carry the required insurance. Workers' compensation insurance, or a certificate of self-insurance from the Department of Industrial Relations, before CSLB will issue or activate the license if the business has employees. A business with no employees files an exemption instead, but CSLB will not accept an exemption where the license is qualified by a responsible managing employee, because an RME is an employee..
- 12Business license. Obtain a business license. The CSLB license is issued to a business entity: sole owner, partnership, corporation, limited liability company or joint venture. Form or register the entity first, since every officer, member, responsible manager or director must be listed as personnel of record. Cities and counties also require their own business tax registration or business license wherever you work, separately from the CSLB license..
- 13Other. Certification of Work Experience form for each period of experience claimed, completed by an employer, fellow employee, other journeyperson, contractor, union representative, building inspector, architect, engineer or client who observed the work. CSLB does not visit worksites and does not accept photographs as proof, and it randomly reviews a percentage of experience statements..
Published fees on this path total $650, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Law / code exam
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $25,000
- Surety bond · $25,000 · if applicable
- Surety bond · $100,000 · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $1,000,000 · if applicable
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How California licenses residential contractors
California residential contractor · “B-2 Residential Remodeling Contractor (Class B General Building also covers homes)”
Statewide license
Issued by Contractors State License Board
California licenses residential contractors statewide through the Contractors State License Board (CSLB), and the homes-only classification is B-2 Residential Remodeling Contractor, created by Business and Professions Code section 7057.5 and issued since January 1, 2021. A B-2 contractor improves an existing residential wood frame structure and may only take a contract that requires at least three unrelated building trades or crafts; it cannot make structural changes to load-bearing parts of a building such as footings, foundations, load-bearing walls or roof structures, and it cannot install, replace or extend electrical, mechanical or plumbing systems unless it holds the matching specialty classification or subcontracts that work. A Class B General Building license also covers houses, including new construction and structural remodeling, so many residential builders apply for B instead of or as well as B-2. CSLB issues the license to a business (sole owner, partnership, corporation, limited liability company or joint venture) and the person who meets the experience and examination requirements is named on it as the qualifying individual, a responsible managing employee (RME) or responsible managing officer (RMO), so the reader who is moving states applies as that qualifier. A contractor license from another state cannot be used in California, even as a subcontractor or for a single project, and any project worth $1,000 or more in labor and materials, or any project needing a permit or workers, requires a CSLB license. Cities and counties separately require a local business tax registration, which is an additional step and not a substitute for the state license.
Why South Dakota has nothing to transfer
South Dakota residential contractor
Licensed by cities and counties
South Dakota issues no state residential contractor, home builder or remodeler license, and no state board examines or qualifies people who build houses. The Department of Labor and Regulation's list of occupational licensing agencies contains an Electrical Commission, a Plumbing Commission and a Board of Technical Professions for architects and engineers, and no contractor board of any kind, so a builder who self-performs electrical or plumbing work needs the matching state license and everything else is local. Cities decide who may build houses inside their limits, and the four largest programs are quite different from one another: Sioux Falls requires a Residential Building Contractor's license with its own written examination, a $20,000 compliance bond and $300,000 of liability insurance; Rapid City issues a Class B residential contractor license on a city examination; Aberdeen licenses residential contractors after an open-book examination and a City Council vote; Brookings issues an annual residential contractor license on insurance and a $75 fee with no examination at all. Separately from any of that, every contractor working anywhere in South Dakota must hold a contractor's excise tax license from the Department of Revenue before starting work, which is free and is a tax registration rather than a test of skill. A builder moving to South Dakota therefore has no state license to transfer and no state reciprocity to apply for: the work is registering for the excise tax license and then qualifying city by city, and only Aberdeen offers any credit for a license held elsewhere.
How local licensing works in South Dakota
How it works in South Dakota. There is no state contractor license, no state application and no state examination, so nothing carries automatically from one South Dakota city to the next, let alone from another state. What every contractor does need before starting work anywhere in the state is a contractor's excise tax license from the Department of Revenue: 'an individual must be licensed before starting work in South Dakota' and 'all contractors must be licensed regardless of the amount of the receipts they have or the amount of tax due.' There is no fee for it, the excise tax itself is 2% of a prime contractor's gross receipts, and three of the four cities below want to see a copy of the license card before they will issue a city license. Get that first, then take each city in turn.
Sioux Falls. Building Services 'requires a Residential Building Contractor's License of all contractors doing work on residential 1- & 2-family dwellings and townhomes within the city limits', and the examples it gives run from sheds, decks, shingles and sheetrock to basement finishing and new construction. The license is held through a named Construction Supervisor, who must first pass the Construction Supervisor Examination: a timed open-book test on the City of Sioux Falls Residential Code Handbook, offered monthly, 50 questions, 'You must get 80% or higher to pass the test, therefore a maximum of 10 of the 50 questions may be incorrect.' The examination fee is $75.00 and the handbook is $10.00. 'Upon application the Construction Supervisor must submit a $20,000 Compliance Bond, a minimum of $300,000 general liability insurance and the appropriate license fees within 90 days of examination.' Licenses run three years, one hour of continuing education is required in each cycle, and a license expired more than twelve months means sitting the examination again unless an inactive license was maintained. On out-of-state credentials the city is blunt: 'No, the city of Sioux Falls does not reciprocate any licenses. You will still need to take and pass examination before applying for the license.' The city does not print the license fee itself on the page, so ask licensing on 605-367-8672 what to send with the bond and the certificate. Sioux Falls also issues a separate Residential Roofing & Repair Contractor license and separate electrical, mechanical, plumbing, fireplace, refrigeration, irrigation, right-of-way and sign licenses.
Rapid City. Building Services licenses a Class B contractor 'for construction of detached single-family houses, attached single family houses and two-family dwellings', on a city-administered open-book examination based on the 2018 International Residential Code and the Rapid City amendments, 54 multiple choice questions in three hours, sat at City Hall. The license costs $200 initially and $100 to renew, runs three years and carries six hours of continuing education per period. Every applicant files a certificate of insurance naming the City of Rapid City as certificate holder and nothing else is accepted, with minimum general aggregate liability of $1,000,000, $300,000 fire damage and $1,000,000 each occurrence, plus a workers' compensation certificate or a signed statement of non-participation for an owner or partnership with no employees. A copy of the state excise tax certificate goes in the packet. Roofing is a separate Class R license, also $200 for three years, on a 12-question examination. A licensee who misses renewal has a one-year grace period, after which the license lapses and the examination must be taken again. Building Services is on (605) 394-4120.
Aberdeen. The city is explicit that location makes no difference to whether you need its license: 'Whether you are based in the City of Aberdeen itself, a different city within South Dakota, or you are based out of a completely different state all together, you must be licensed through the City of Aberdeen.' The examination is 50 questions, open book, two hours, with a passing score of 70%, studied from The Contractors Handbook at $15, and '$35 fee will be charged every time an exam is attempted or passed.' Aberdeen is the one place in the state that gives any weight to a license held elsewhere: 'the examination requirement may be waived if proof of prior licensing from recognized jurisdictions is approved by the City of Aberdeen's Building Official.' No jurisdiction is named on the handout, so bring the license and the licensing authority's own documentation and ask the Building Official first. After passing or being waived, the applicant files a $200 first-time fee covering three years, proof of liability insurance, proof of workers' compensation insurance if applicable, and a copy of the excise tax license, and is then approved by the City Council, which meets Monday evenings; paperwork is due by noon the previous Wednesday and permits may be drawn only after the vote. Renewal is $150 every three years. Building Inspection is at City Hall, 123 South Lincoln Street, 3rd Floor, 605-626-7017.
Brookings. Community Development issues a residential contractor license on paperwork alone. The requirements are the application, a $75 fee, an excise tax number, a copy of workers' compensation insurance and 'a copy of current General Commercial Liability Insurance Certificate stating the sum of not less than $500,000 for each occurrence.' There is no examination and no bond. The license year is the calendar year, January 1 to December 31, and it 'must be renewed in order to continue any current project or prior to starting any new project'; a contractor with a job in progress who lets it expire pays double the fee. The license is neither refundable nor transferable. Building permits are required in the city and on nonagricultural land in the joint jurisdictional area roughly three miles out. Community Development is at 520 3rd Street, Suite 140, (605) 692-6629.
Everywhere else. Smaller South Dakota cities set their own rules and many require only a permit and proof of insurance. Ask the building official in each city you intend to work in, and remember that the excise tax license is required statewide whether or not the city licenses anybody.
- Sioux Falls (Building Services - Residential Building Contractor license, examination, bond and insurance)
- Rapid City (Building Services Division - Class B one- and two-family residential contractor license)
- Aberdeen (Building Inspection - Residential Building Contractor license, examination waivable by the Building Official)
- Brookings (Community Development - annual Residential Contractor license, no examination)
Common questions
- Do I have to take the California residential contractor exam if I'm licensed in South Dakota?
- Yes. California requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a California residential contractor license from South Dakota?
- Published fees on this path total $650, not counting exam vendor fees or bonds.
- Do my South Dakota work hours count in California?
- Yes. Documented out-of-state experience counts toward California's eligibility requirements.
- Does it work the other way, from California to South Dakota?
- Not necessarily. Reciprocity is directed. Going from California to South Dakota, the mechanism is not applicable.
Sources
- California Business and Professions Code Sec. 7068 - Qualification of applicants; responsible managing employee; out-of-state experience · Cal. Bus. & Prof. Code Sec. 7068 · California Legislative Information (Office of Legislative Counsel) · Statute · verified September 17, 2026
- CSLB - Application for Original Contractors License · Cal. Bus. & Prof. Code Sec. 7065, 7065.1, 7065.2 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Bond Requirements · Cal. Bus. & Prof. Code Sec. 7071.6, 7071.8, 7071.9 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - B General Building Contractor classification · Cal. Bus. & Prof. Code Sec. 7057 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - B-2 Residential Remodeling Contractor classification · Cal. Bus. & Prof. Code Sec. 7057.5 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - List of All CSLB Fees · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Get Licensed to Build: A Guide to Becoming a Licensed Contractor (May 2025) · Contractors State License Board · Other · verified September 17, 2026
- CSLB - Frequently Asked Questions About Journey-level Experience · Contractors State License Board · Faq · verified September 17, 2026
- Contractors State License Law - 2026 CSLB Law Book (B&P Code Division 3, Chapter 9 and 16 CCR Division 8) · Cal. Bus. & Prof. Code Sec. 7065.4, 7068; former Sec. 7067.5 (repealed 2016); 16 CCR Div. 8 · Contractors State License Board · Statute · verified September 17, 2026
- CSLB - Licenses for Limited Liability Companies (LLC) · Cal. Bus. & Prof. Code Sec. 7065, 7071.6.5, 7071.19, 7076.2 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - If You Already Have a Contractors License From Another State or Country · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Processing Times · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Reciprocal Classifications List · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Reciprocity Requirements · Contractors State License Board · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.