Texas to Alabama: residential contractor license reciprocity
Texas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Unlimited Home Builders License by examination (states with no exemption on the Board's list)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A residential builder arriving from a state that is not on the Board's short exemption list gets no credit for the license held elsewhere. The applicant entity files the notarized application, names its designated qualifying representative, pays the $100 processing fee and the $250 annual license and Recovery Fund fees in one $350 payment, orders a business-related credit report sent straight to the Board by the credit agency, files the entity certificates and proves citizenship or lawful presence. The qualifying representative then takes both Alabama Home Builders exams through Prov: the Skill exam (80 questions, four hours, 66% to pass, based on the 2015 International Residential Code) and the Business and Law exam (40 questions, two hours, 70% to pass). No Board authorization is needed to book the exams and a passing score stays good for three years. Alabama sets no minimum years of building experience, so documented out-of-state work neither shortens nor replaces any step. The Board says a complete file takes roughly three to four weeks and must be complete seven days before the Board meeting that reviews it.
Both Prov examinations are required on this path, and the Business and Law exam is never waived at any level. A license with limitation or limited to roofing skips the examination entirely, but its experience test is a business or occupational license as a contractor issued by an Alabama municipality, township or county, currently held or held within the year before the application, so an out-of-state local license does not open that route; the alternatives are a written recommendation from the holder of an unlimited home builders license in Alabama or any other state, or from a building official in Alabama or any other state. Licenses run for the calendar year and renew by November 30 for the following year, with six hours of continuing education. A general contractor license issued by the other Alabama board does not cover residential construction unless its number is below 18908, which means issued before the Home Builders Licensure Board was created in 1992.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Do not count
- Typical processing
- About 28 days
What you must already have
- The Board must be satisfied that the applicant has the experience, ability, good character and willingness to serve the public required by Ala. Code § 34-14A-5. There is no published minimum number of years or hours of residential building experience for an unlimited license.
What you'll do to get licensed in Alabama
- 1Trade exam. Pass the destination's trade exam. Alabama HBLB Skill Exam through Prov: 80 questions, 4 hours, 66% to pass, open book against the 2015 International Residential Code and the Residential Home Builder Study Guide, covering plan reading, sitework and foundations, concrete, masonry, carpentry, roofing, interior and exterior finish, associated trades and OSHA. No Board authorization is needed before booking, and a passing score stays valid for three years..
- 2Law / code exam. Pass a law, rules, or code exam. Alabama HBLB Business and Law exam through Prov: 40 questions, 2 hours, 70% to pass, open book against the NASCLA Contractors Guide to Business, Law and Project Management, Alabama Residential Construction edition. This exam is never waived..
- 3Exam fee. Pay the exam fee ($130). $130 if the Skill and Business and Law exams are taken on the same day, or $80 for each exam taken on separate days. Testing fees are paid directly to Prov, not to the Board..
- 4Application fee. Pay the application fee ($100). Non-refundable new license application processing fee (Ala. Admin. Code r. 465-X-4-.04(3)). It is paid together with the annual license fee in a single payment and is not returned if the application is withdrawn or denied..
- 5License fee. Pay the license or certificate fee ($250). Annual license fee of $235 plus the $15 annual Homeowners' Recovery Fund fee, sent with the application as one $350 payment together with the $100 processing fee. The license fee is refunded on written request if the application is rejected or denied. A license limited to residential roofing costs $150 a year and pays no Recovery Fund fee. Cheque or money order only; the Board does not take cash or credit cards..
- 6Financial responsibility. Show financial responsibility. Business-related credit report including a public records search, ordered by the applicant at a fee of $35 and sent to the Board directly by the credit reporting agency. There is no net worth or working capital minimum, but outstanding business-related collection or foreclosure accounts must not exceed $500 in total, and outstanding judgments, judgment liens or perfected liens must not exceed $500 in total ($1,000 where the matter is under dispute or on appeal), unless the applicant documents payment, a payment plan or the circumstances to the Board's satisfaction. An application pending more than 90 days may need an updated report..
- 7Business license. Obtain a business license. The license is issued to the legal entity that will contract. A corporation, limited liability company or limited partnership files a Certificate of Compliance from the Alabama Department of Revenue, and an entity organized outside Alabama also files a Certificate of Existence from the Alabama Secretary of State. Conducting residential homebuilding through an entity that does not itself hold an Alabama Home Builders license is a violation of the Act..
- 8Surety bond. Post a surety bond ($10,000) (if applicable). Required only for a license limited to residential roofing: a surety bond of not less than $10,000 naming the Home Builders Licensure Board as obligee, valid through December 31 of the licensure year and submitted to the Board directly by the surety (Ala. Admin. Code r. 465-X-3-.04(5)). Roofers file this instead of a credit report. Unlimited and limited licenses require no bond..
- 9Insurance. Carry the required insurance (if applicable). The Board states that the law regulating residential home builders does not address insurance, so no policy is required for licensure. Other Alabama laws, and most lenders and homeowners, still expect general liability and workers compensation coverage; the Alabama Department of Labor answers questions about workers compensation..
- 10Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: six credit hours of Board-approved continuing education each year, two of them in Alabama-specific subjects, taken by the designated qualifying representative where the license is held by an entity. Licenses run for the calendar year and renewal applications are due by November 30 of the preceding year (Ala. Admin. Code r. 465-X-3-.06)..
- 11Other. Notarised application on the Board's form (no photocopies), notarized corporate minutes or equivalent naming the designated qualifying representative as an officer, general partner, member or manager, and proof of United States citizenship or lawful presence for every applicant..
Published fees on this path total $480, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Law / code exam
- Exam fee · $130
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $10,000 · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Alabama licenses residential contractors
Alabama residential contractor · “Residential Home Builders License (without limitation, with limitation, or limited to residential roofing)”
Statewide license
Issued by Alabama Home Builders Licensure Board
Alabama licenses residential builders statewide through the Home Builders Licensure Board in Montgomery, which is a different agency from the Alabama Licensing Board for General Contractors that handles commercial work. A license is required to construct, remodel, repair or improve a residential structure where the cost of the undertaking including labor and materials exceeds $10,000. There are three tiers: a license without limitation (unlimited), which covers whole houses, work involving more than one trade and residential roofing; a license with limitation (limited), for single-trade work that is not a whole residence; and a license limited to residential roofing. The license is held by the business, not the person: an individual may be licensed personally, but a partnership, corporation, LLC or non-profit must name a designated qualifying representative who is a general partner, officer, member or manager and who personally meets the experience and examination requirements, so an inbound builder applies as or for the entity that will sign contracts. An unlimited license is earned by passing the Alabama Home Builders Skill exam and the Business and Law exam through Prov and by showing business-related financial responsibility through a credit report; Alabama sets no minimum years of experience. The Board publishes one reciprocity rule, naming five states whose residential licensees may skip the Skill exam.
Why Texas has nothing to transfer
Texas residential contractor
Licensed by cities and counties
Texas issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build houses. The Texas Residential Construction Commission, which registered builders and remodelers from 2003, was abolished and its Act expired on September 1, 2009, and nothing replaced it. What Texas does license are individual trades: electricians and air conditioning and refrigeration contractors through the Texas Department of Licensing and Regulation, and plumbers through the Texas State Board of Plumbing Examiners, so a builder who self-performs that work needs the matching state license. Residential contracting itself is regulated, where at all, by cities through registration, insurance, bonding and permitting: San Antonio, Fort Worth, El Paso, Dallas and Austin all require a residential builder or home-improvement contractor to register before pulling a permit, while Houston states that general contractors are not required to be licensed. A builder moving to Texas therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city where they build, carrying the insurance and bonds those cities require, and hiring or becoming state-licensed trades. The one credential that does travel is a national ICC certification, which San Antonio accepts from the registration holder or a designated Certified Agent.
How local licensing works in Texas
How it works in Texas. There is no state license, no state application and no state exam for residential contractors. Cities control who may pull a residential building permit, and each city sets its own rules, so a builder registers separately in every jurisdiction where they work. Registration is about identity, insurance, bonding and (in one city) a national certification - not about trade competence testing, and not about what license you held in your last state. Nothing an out-of-state residential contractor holds gives a discount on any of it.
San Antonio. Development Services runs the most demanding residential program in the state, under Chapter 10-115 of the Code of Ordinances, with two registrations. A Residential Building Contractor registration covers 'the constructing, structural alteration, or enlarging any one or two-family detached dwelling' (new homes, additions, foundations, roofing, pools and spas, fences, minor repairs). It requires an FBI criminal history record dated within 30 days of submittal, liability insurance of at least $500,000 per occurrence, $1,000,000 aggregate and $500,000 aggregate for products and completed operations with the City of San Antonio as certificate holder, and a certification: 'either the registration holder or one agent affiliated with the contractor must obtain a Residential ICC Certification or other certifications approved by the Building Official; or the company has a minimum of 5 years of continued registration with no violations ... suspensions, or revocation.' The fee is $170 and the term is two years. A Home Improvement Contractor registration covers 'nonstructural repair, replacement, remodeling, alteration, conversion, or modernization to any existing building', needs the same FBI background check and insurance of at least $300,000 per occurrence and $600,000 aggregate, costs $150 for two years, and carries no certification requirement. Both applications ask whether the applicant has lost or been suspended from home improvement or residential building privileges in any Texas jurisdiction. Apply through the BuildSA portal or in person at 1901 S. Alamo Street; customer service is (210) 207-1111.
Dallas. Building Inspection registers general contractors on one form, and its own note defines the category broadly: 'A General Contractor includes, but is not limited to, the following: residential general contractor, commercial general contractor, roofing contractor, fence contractor, foundation contractor, demolition contractor and pool contractor.' The form states an annual registration or renewal fee of $120.00 and requires a contracting company addressed inside the city limits to give a Certificate of Occupancy number or have a home office form on file. The responsible party assigns PINs to the company staff allowed to sign permit applications. There is no exam and no experience requirement. Registrations are renewed in person at a Building Inspection office or online through DallasNow; call (214) 948-4480.
Fort Worth. Development Services requires that 'any firm, business, individual or organization obtaining a permit related to the building, mechanical, plumbing or electrical provisions' of the city codes hold a valid Contractor Registration, with a carve-out for a single-family homeowner working on their own residence. A residential builder registers as a Building Contractor: the completed application plus a copy of a valid driver's license, $168.75, expiring one year from the date of issuance. No trade license, exam or experience documentation is required for that type. Customer service is 817-392-2222.
El Paso. Planning and Inspections registers a General Contractor for 'New Residential, Additions, Alterations, and Roofing' as well as commercial work. The packet is an Assumed Name Certificate or corporate documents, the Contractor Registration Application, a certificate of general liability insurance of at least $100,000 with the City of El Paso as certificate holder, and a blanket building construction bond - the current application states $50,000 for general contractors, while the city's requirements sheet lists $25,000 (confirm the amount with the One Stop Shop before buying the bond). A $10,000 blanket bond covers a defined list of minor work such as fences, tents, temporary signs and patch-and-paint. The requirements sheet lists a $102.00 annual fee. The application 'must be filed annually to be eligible to obtain permits from the City of El Paso in accordance with Section 18.02.104.5 of the El Paso City Code.' One Stop Shop, 811 Texas Avenue, 915-212-0104.
Austin. Development Services is explicit that 'in Texas, anyone can be a General Contractor, including homeowners, and a state license is not required', but the general contractor named on a building permit must first register with Building and Trade Contractor Services through an Austin Build + Connect (AB+C) portal account, submitting the web registration form and a Letter of Authorization. General contractors register once and update only when their name, address or authorized agents change; the city publishes no fee for the registration.
Houston. Houston requires nothing of a residential builder. Its Residential Permitting 101 guide states that 'the building permit may be purchased by the owner, agent, contractor. General Contractors are not required to be licensed', and the plan review page repeats that 'a general contractor's license is not required to obtain building permits.' What Houston does require is that the trades register their state licenses with the city: a TDLR-licensed Master Electrician, a TDLR Class A or B air conditioning contractor and a TSBPE-licensed Master Plumber must each be registered with the City of Houston before buying a trade permit, and a sidewalk or driveway permit needs a contractor with a $2,000 surety bond.
Everywhere else. Smaller Texas cities and unincorporated county areas vary widely; many require only a permit and proof of insurance, and counties generally have no building-permit authority at all outside a city's limits and extraterritorial jurisdiction. Check the building or development services department of each city before contracting there.
- San Antonio (Development Services - Residential Building Contractor and Home Improvement Contractor registration)
- Dallas (Building Inspection - General Contractor registration)
- Fort Worth (Development Services - Building Contractor registration)
- El Paso (Planning and Inspections - General Contractor registration)
- Austin (Development Services - Building and Trade Contractor Services registration)
- Houston (Houston Permitting Center - no general contractor license required; trade registration only)
Common questions
- Do I have to take the Alabama residential contractor exam if I'm licensed in Texas?
- Yes. Alabama requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Alabama residential contractor license from Texas?
- Published fees on this path total $480, not counting exam vendor fees or bonds.
- Do my Texas work hours count in Alabama?
- No. Alabama does not credit out-of-state hours on this path.
- How long does the application take?
- The board's published or typical processing time is about 28 days.
- Does it work the other way, from Alabama to Texas?
- Not necessarily. Reciprocity is directed. Going from Alabama to Texas, the mechanism is not applicable.
Sources
- Alabama Home Builders Licensure Board - Frequently Asked Questions, Applicants (reciprocity, thresholds, timelines) · Alabama Home Builders Licensure Board · Faq · verified September 17, 2026
- Alabama Home Builders Licensure Board - How to Get Licensed (license types, exams, credit report, bond) · Alabama Home Builders Licensure Board · Agency Page · verified September 17, 2026
- Home Builders Licensure Law and Administrative Rules and Regulations (law effective October 1, 2025; rules effective November 14, 2025) · Ala. Code § 34-14A-1 et seq.; Ala. Admin. Code r. 465-X-3-.04, 465-X-3-.06, 465-X-4-.04 · Alabama Home Builders Licensure Board · Admin Rule · verified September 17, 2026
- New Unlimited License Application Packet, Corporate - Alabama Home Builders Licensure Board (with Prov Candidate Information Bulletin) · Ala. Code §§ 34-14A-7, 34-14A-14 · Alabama Home Builders Licensure Board · Form · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.