LicensebyState

Texas to Hawaii: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 15 sources

Texas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Hawaii's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state experience credited toward the four years, full Hawaii examination (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

The Board answers the question directly in its own FAQ: Hawaii has no reciprocity agreements with other states, and all applicants meet the same licensing and examination requirements. There is no verification-of-licensure form, no examination waiver and no NASCLA route, and a license held elsewhere is never exchanged for a Hawaii one. What an out-of-state builder does carry across is the work behind the license. The qualifying person must show four full years of supervisory experience within the past ten years in the classification applied for, and years spent supervising under another state's license count in full: the Board asks for proof of licensure, and an out-of-state contractor who held a license in that state is one of the people who may sign an experience certificate. The paperwork is the same for everyone. At least three notarized experience certificates, at least one for each classification and no two in a classification from the same person, plus a Chronological History of Projects listing every job, the trades subcontracted and the actual on-site supervision time. The Board reviews complete applications at its monthly meeting, then approves the applicant to sit the Hawaii examinations, which must be passed within six months.

Both examination parts are taken for the Class B general building classification: part I on Hawaii building, safety, health, labor and lien law and the administrative principles of contracting, part II on trade knowledge in the classification. Seventy-five percent is the pass mark for each part. The Board's examination page says the examinations moved to PSI Services LLC in January 2023, while the October 2025 requirement sheets still name Prometric; the examination approval letter names the testing agency, the examinations the applicant is eligible for and the date they must be passed by. HAR 16-77-41 excuses an examination only where the applicant previously qualified by written examination within four years and is applying in the same classification, which is about a lapsed Hawaii credential rather than an out-of-state one. Applying for the Class B license at the same time as a Class C specialty license needs a separate part II examination and a separate project list for each classification.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Four full years of supervisory experience within the ten years immediately before the application, in the classification applied for, at the level of journeyman, foreman, supervisor or contractor, counting only time actually spent on site supervising and directing employees.HRS 444-11(a)(2) lets the Board accept experience acquired on a self-employed or unlicensed basis where it can be verified. Technical training may be approved as acceptable experience but never counts for more than one year. Design time, ordering materials and scheduling around rain-outs or deliveries do not count.
  • Supervisory years worked under another state's contractor license count toward the four years. The Board asks an applicant with licensed experience elsewhere to provide proof of licensure, and an out-of-state contractor who held a license in that state may sign an experience certificate. The proof of licensure does not replace the certificates or the project list.
  • You must have no disciplinary action or unresolved complaints on your record.
  • The qualifying person must be at least eighteen and, unless applying as a sole proprietor, must be employed by the licensed contracting entity as its Responsible Managing Employee. The principal RME must be in residence in Hawaii while the entity's license is in effect or a project is under construction, and a licensee must keep a physical place of business in the State; a post office box is not accepted.

What you'll do to get licensed in Hawaii

  1. 1Law / code exam. Pass a law, rules, or code exam. Part I of the contractor examination: the building, safety, health, labor and lien laws of Hawaii and the basic administrative principles of the contracting business. Seventy-five percent is needed to pass. It is never waived for an out-of-state applicant. The Board strongly recommends obtaining a copy of the contractor licensing law and rules before sitting it..
  2. 2Trade exam. Pass the destination's trade exam. Part II of the contractor examination: trade knowledge in the classification requested, here Class B general building. Seventy-five percent is needed to pass. The applicant registers with the testing agency only after the Board approves the application and issues an examination approval letter, and must pass both parts within six months or file a new application and fee. A failed part may be retaken for a further fee inside that six-month window..
  3. 3Application fee. Pay the application fee ($50). $50 nonrefundable application fee for each application filed, payable to Commerce and Consumer Affairs. More than one classification may be requested on a single application, but a contracting entity and its Responsible Managing Employee file separate applications and pay the fee separately, so an inbound company and its qualifying person pay $50 each. A further $10 contractors education fund fee accompanies every application, and a dishonored payment carries a $25 service charge..
  4. 4Exam fee. Pay the exam fee. Examination fees are paid directly to the testing agency when the approved applicant registers, and are charged for each part taken. The Board's published FAQ lists $75 per part, with most classifications taking both parts, but that document dates from before the examinations moved to PSI Services LLC, so confirm the current amount with PSI on (833) 333-4754 before registering. An interpreter, if the Board approves one, adds $100 to the examination fee..
  5. 5License fee. Pay the license or certificate fee. The Board assesses the license fee after the application is approved and the examinations are passed, telling the applicant the exact amount at that point. Its published FAQ gives $663 for a contracting entity or sole proprietor licensed in the first year of the two-year cycle and $494 in the second, and $438 or $334 on the same split for a Responsible Managing Employee, so budget for both. Licenses run to September 30 of the next even-numbered year whatever date they were issued. On-time renewal currently costs $338 for an entity or sole proprietor, $208 for an RME and $160 for an inactive license, plus $5 education fund and $10 recovery fund fees..
  6. 6Financial responsibility. Show financial responsibility. A current financial statement, dated within one year, that is compiled, reviewed or audited and accompanied by an independent accountant's report from a CPA or public accountant holding a current permit to practice; an accountant licensed in another state attaches a copy of that license. For compiled and reviewed statements the applicant also signs the Board's own Financial Statement form CT-02 whether or not the accountant used it. The Board publishes no minimum net worth or working capital figure: it weighs the statement together with the credit reports and the tax clearance to decide whether the applicant has financial integrity, and whether to impose a bond. RMEs do not file a financial statement; the entity or sole proprietor does..
  7. 7Surety bond. Post a surety bond (if applicable). A surety bond is not automatic in Hawaii. The Board may require one as proof of financial integrity, and sets the amount case by case; the bond form leaves the penal sum blank. Where one is imposed, it runs to the State of Hawaii on form CT-09, is conditioned on compliance with HRS chapter 444 and on paying employees' wages, is continuous, and can be canceled by the surety only on thirty days' written notice. Both the applicant and the surety notarize it. After a licensee has maintained the bond for at least a year it may ask the Board to waive it on proof of financial integrity, supported by current credit reports, financial statements and a tax clearance..
  8. 8Insurance. Carry the required insurance. A certificate of comprehensive liability and property damage insurance with minimum limits of $100,000 bodily injury each person, $300,000 bodily injury each occurrence and $50,000 property damage each occurrence, plus a workers' compensation certificate from a carrier authorized in Hawaii or proof of self-insurance or exclusion. An out-of-state contractor may use a non-admitted carrier where the producer qualifies for an exemption under HRS 431:9A-104(b)(6). Coverage must be continuous for the life of the license: a lapse forfeits both the entity and the RME license automatically, and if it is not restored within sixty days both must apply as new applicants. Certificates are filed fastest through the Board's online insurance submittal system..
  9. 9Business license. Obtain a business license. The contracting entity must be registered with the DCCA Business Registration Division before it can be licensed: a Hawaii corporation or LLC files a stamped copy of its articles, a foreign corporation its certificate of authority and a partnership its registration statement, and an entity registered for more than a year attaches a Certificate of Good Standing issued within the past year. Any trade name must be separately registered and a filed-stamped copy supplied. A current Hawaii tax clearance, issued within six months, is filed with the application and again at every renewal, and the name on it must match the license name exactly..
  10. 10Background check. Complete a background check. A current and complete credit report for each officer, partner, manager or member, issued not more than six months earlier and covering at least the previous five years, showing each current and past debt, its status and any public records; a summary or a bare credit score is not accepted. Where a partner or member is itself a business, the credit reports of its officers or a comprehensive business credit report are filed instead. The RME files a credit report with the RME application as well..
  11. 11Continuing education. Complete continuing education (if applicable). Hawaii imposes no continuing education requirement on contractors. Renewal by September 30 of each even-numbered year instead turns on continued financial integrity: a current tax clearance or payment arrangement, a statement about any liens, undisputed debts or judgments, proof that workers' compensation and liability coverage have been maintained without a break, and proof that any bond the Board imposed is current..
  12. 12Other. The application, fee and every supporting document must reach the Board's Honolulu office on or before the first Tuesday of the month before the meeting at which it will be considered; the Board meets monthly except in December, and faxed or emailed copies are not accepted. An application is abandoned if licensure is not completed within a year of filing or the examinations are not passed after eligibility, and the Board keeps a denied application for two years. A Social Security number must be given or the application is treated as deficient..

Published fees on this path total $50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education · if applicable

How Hawaii licenses residential contractors

Hawaii residential contractor · “Class B General Building Contractor (no separate residential class)

Statewide license

Verified September 17, 2026· 9 sources

Issued by Hawaii Contractors License Board (DCCA Professional and Vocational Licensing Division)

Hawaii has no residential contractor license. The Contractors License Board, in the Department of Commerce and Consumer Affairs, classifies every contractor into exactly three branches under HRS 444-7: Class A general engineering, Class B general building and Class C specialty. Houses fall inside Class B, which covers any structure built for the support, shelter and enclosure of persons or property whose construction uses more than two unrelated building trades, so a homebuilder in Hawaii holds the same license as a commercial builder and this page points at Class B for both levels. Two limits are worth knowing. A Class B license does not let the holder take a contract that needs only one or two unrelated trades unless the holder also carries the matching Class C specialty license, and it never covers electrical or plumbing work, which needs both the C-13 or C-37 classification and an individually licensed electrician or plumber. The license is entity-held and qualified by a named person: a corporation, partnership, joint venture, LLC or LLP is licensed only while it employs a licensed Responsible Managing Employee, the RME sits the examinations and proves the experience, and the two file separate applications and pay separate fees. An individual who will trade in their own name applies instead as a licensed sole proprietor.

Moving to HawaiiLeaving Hawaii

Why Texas has nothing to transfer

Texas residential contractor

Licensed by cities and counties

Verified September 17, 2026· 15 sources

Texas issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build houses. The Texas Residential Construction Commission, which registered builders and remodelers from 2003, was abolished and its Act expired on September 1, 2009, and nothing replaced it. What Texas does license are individual trades: electricians and air conditioning and refrigeration contractors through the Texas Department of Licensing and Regulation, and plumbers through the Texas State Board of Plumbing Examiners, so a builder who self-performs that work needs the matching state license. Residential contracting itself is regulated, where at all, by cities through registration, insurance, bonding and permitting: San Antonio, Fort Worth, El Paso, Dallas and Austin all require a residential builder or home-improvement contractor to register before pulling a permit, while Houston states that general contractors are not required to be licensed. A builder moving to Texas therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city where they build, carrying the insurance and bonds those cities require, and hiring or becoming state-licensed trades. The one credential that does travel is a national ICC certification, which San Antonio accepts from the registration holder or a designated Certified Agent.

How local licensing works in Texas

How it works in Texas. There is no state license, no state application and no state exam for residential contractors. Cities control who may pull a residential building permit, and each city sets its own rules, so a builder registers separately in every jurisdiction where they work. Registration is about identity, insurance, bonding and (in one city) a national certification - not about trade competence testing, and not about what license you held in your last state. Nothing an out-of-state residential contractor holds gives a discount on any of it.

San Antonio. Development Services runs the most demanding residential program in the state, under Chapter 10-115 of the Code of Ordinances, with two registrations. A Residential Building Contractor registration covers 'the constructing, structural alteration, or enlarging any one or two-family detached dwelling' (new homes, additions, foundations, roofing, pools and spas, fences, minor repairs). It requires an FBI criminal history record dated within 30 days of submittal, liability insurance of at least $500,000 per occurrence, $1,000,000 aggregate and $500,000 aggregate for products and completed operations with the City of San Antonio as certificate holder, and a certification: 'either the registration holder or one agent affiliated with the contractor must obtain a Residential ICC Certification or other certifications approved by the Building Official; or the company has a minimum of 5 years of continued registration with no violations ... suspensions, or revocation.' The fee is $170 and the term is two years. A Home Improvement Contractor registration covers 'nonstructural repair, replacement, remodeling, alteration, conversion, or modernization to any existing building', needs the same FBI background check and insurance of at least $300,000 per occurrence and $600,000 aggregate, costs $150 for two years, and carries no certification requirement. Both applications ask whether the applicant has lost or been suspended from home improvement or residential building privileges in any Texas jurisdiction. Apply through the BuildSA portal or in person at 1901 S. Alamo Street; customer service is (210) 207-1111.

Dallas. Building Inspection registers general contractors on one form, and its own note defines the category broadly: 'A General Contractor includes, but is not limited to, the following: residential general contractor, commercial general contractor, roofing contractor, fence contractor, foundation contractor, demolition contractor and pool contractor.' The form states an annual registration or renewal fee of $120.00 and requires a contracting company addressed inside the city limits to give a Certificate of Occupancy number or have a home office form on file. The responsible party assigns PINs to the company staff allowed to sign permit applications. There is no exam and no experience requirement. Registrations are renewed in person at a Building Inspection office or online through DallasNow; call (214) 948-4480.

Fort Worth. Development Services requires that 'any firm, business, individual or organization obtaining a permit related to the building, mechanical, plumbing or electrical provisions' of the city codes hold a valid Contractor Registration, with a carve-out for a single-family homeowner working on their own residence. A residential builder registers as a Building Contractor: the completed application plus a copy of a valid driver's license, $168.75, expiring one year from the date of issuance. No trade license, exam or experience documentation is required for that type. Customer service is 817-392-2222.

El Paso. Planning and Inspections registers a General Contractor for 'New Residential, Additions, Alterations, and Roofing' as well as commercial work. The packet is an Assumed Name Certificate or corporate documents, the Contractor Registration Application, a certificate of general liability insurance of at least $100,000 with the City of El Paso as certificate holder, and a blanket building construction bond - the current application states $50,000 for general contractors, while the city's requirements sheet lists $25,000 (confirm the amount with the One Stop Shop before buying the bond). A $10,000 blanket bond covers a defined list of minor work such as fences, tents, temporary signs and patch-and-paint. The requirements sheet lists a $102.00 annual fee. The application 'must be filed annually to be eligible to obtain permits from the City of El Paso in accordance with Section 18.02.104.5 of the El Paso City Code.' One Stop Shop, 811 Texas Avenue, 915-212-0104.

Austin. Development Services is explicit that 'in Texas, anyone can be a General Contractor, including homeowners, and a state license is not required', but the general contractor named on a building permit must first register with Building and Trade Contractor Services through an Austin Build + Connect (AB+C) portal account, submitting the web registration form and a Letter of Authorization. General contractors register once and update only when their name, address or authorized agents change; the city publishes no fee for the registration.

Houston. Houston requires nothing of a residential builder. Its Residential Permitting 101 guide states that 'the building permit may be purchased by the owner, agent, contractor. General Contractors are not required to be licensed', and the plan review page repeats that 'a general contractor's license is not required to obtain building permits.' What Houston does require is that the trades register their state licenses with the city: a TDLR-licensed Master Electrician, a TDLR Class A or B air conditioning contractor and a TSBPE-licensed Master Plumber must each be registered with the City of Houston before buying a trade permit, and a sidewalk or driveway permit needs a contractor with a $2,000 surety bond.

Everywhere else. Smaller Texas cities and unincorporated county areas vary widely; many require only a permit and proof of insurance, and counties generally have no building-permit authority at all outside a city's limits and extraterritorial jurisdiction. Check the building or development services department of each city before contracting there.

Moving to TexasLeaving Texas

Common questions

Do I have to take the Hawaii residential contractor exam if I'm licensed in Texas?
Yes. Hawaii requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Hawaii residential contractor license from Texas?
Published fees on this path total $50, not counting exam vendor fees or bonds.
Do my Texas work hours count in Hawaii?
Yes. Documented out-of-state experience counts toward Hawaii's eligibility requirements.
Does it work the other way, from Hawaii to Texas?
Not necessarily. Reciprocity is directed. Going from Hawaii to Texas, the mechanism is not applicable.

Sources

  1. Contractors License Board Application Forms and Publications - DCCA Hawaii · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  2. Contractors License Board - Hawaii Department of Commerce and Consumer Affairs · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  3. Bond Form - Contractors License (form CT-09, rev. 09/2013) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  4. Description of Contractor License Classifications - Hawaii Contractors License Board · Hawaii DCCA, Contractors License Board · Other · verified September 17, 2026
  5. Contractors License Board Examination - Application Deadline and Examination Dates · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  6. Contractor Frequently Asked Questions - Hawaii Contractors License Board · Hawaii DCCA, Professional and Vocational Licensing Division · Faq · verified September 17, 2026
  7. Contractors Financial Statement (prescribed form CT-02, rev. 11/2017) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  8. Requirements for License - Contractor, Entity (Form CT-00, rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  9. Requirements for License - Contractor, Responsible Managing Employee (Form CT-00(A), rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  10. Requirements for License - Contractor, Sole Proprietor (rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  11. Hawaii Administrative Rules Title 16, Chapter 77 - Contractors · HAR 16-77-6, 16-77-8, 16-77-11, 16-77-12, 16-77-28, 16-77-32, 16-77-33, 16-77-35, 16-77-39 to 16-77-46, 16-77-54, 16-77-55, 16-77-71, 16-77-76, 16-77-89 · Hawaii DCCA, Contractors License Board · Admin Rule · verified September 17, 2026
  12. HRS 444-11 - No license issued when (contractor qualifications) · HRS 444-11 · Hawaii State Legislature · Statute · verified September 17, 2026
  13. HRS 444-7 - Classification (contractors) · HRS 444-7 · Hawaii State Legislature · Statute · verified September 17, 2026
  14. HRS 444-9 - Licenses required (contractors) · HRS 444-9 · Hawaii State Legislature · Statute · verified September 17, 2026
  15. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related