LicensebyState

Texas to South Carolina: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 5 sources

Texas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is South Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Residential Builder license by exam waiver or by examination (states without a named agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A residential builder arriving from a state that is not on the Commission’s four-state list still has a waiver route: the Commission waives the Residential Builder technical portion of the examination for anyone who passed the NASCLA Accredited Examination for Commercial General Building Contractors within the past three years, and a copy of the exam transcript goes in with the application. The Business Management and Law portion of the examination and the work experience requirement are not waived on any route. Without the NASCLA credential the applicant sits both portions of the South Carolina Residential Builder examination through PSI, with eligibility good for one year and three attempts in a twelve-month period. Either way the Commission first reviews and approves the work experience, so file the $135 application with the experience affidavits, W-2s or 1099s, the credit report and the $15,000 bond, then pay the $220 license fee once approved. A license obtained on a technical exam waiver is a limited "Residential Builder Exam Waiver" license: mechanical trades work must be subcontracted to an appropriately licensed person or company, and to do that work yourself you must apply by examination instead.

A currently licensed South Carolina General Contractor with the Building (BD) or Limited Building (LB) classification, in good standing and active for a year or longer and obtained by examination, is the third waiver route; Commission staff verify that internally. S.C. Code Section 40-59-220(F) is written more broadly than the Commission’s published routes - it allows a license without examination for applicants licensed in good standing in other states the commission determines to have comparable examinations - but the published routes are the four named states, the South Carolina BD or LB license and the NASCLA exam. The Commission publishes no processing time; an application stays open one year from receipt. Ask at [email protected] or (803) 896-4696.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in Texas that the destination considers comparable.The Commission’s own Residential Builder page and its application instructions both say the technical portion may be waived where the applicant "has passed the NASCLA Commercial General Building Contractor exam within the past 3 years", with a copy of the exam transcript submitted with the application. The NASCLA exam is an examination credential, not a license and not an agreement between two states: anyone may sit it in any participating jurisdiction. It does not waive the Business Management and Law portion, the experience requirement, the bond, the credit report or any fee.
  • Your qualifying exam must have been passed within the last 3 years.
  • At least one year of actual residential building experience performed within the past five years, under the supervision of a licensed residential builder or another appropriately licensed professional engaged in residential building construction. Experience earned outside South Carolina counts.Documented with copies of W-2s or 1099s from each employer and a Residential Builder Experience Affidavit completed by each supervisor or employer listed on the application; the details on the affidavits must match the application. S.C. Code Section 40-59-220(B) also lets the Commission accept other education or experience, or a combination, and the Commission invites a written explanation with supporting documents where the standard paperwork cannot be produced. The work experience requirement applies on the exam-waiver routes as well as on the examination route.

What you'll do to get licensed in South Carolina

  1. 1Trade exam. Pass the destination's trade exam (if applicable). Residential Builder technical portion of the South Carolina examination, administered by PSI at https://test-takers.psiexams.com/scrb/. It is required unless the applicant qualifies for a technical exam waiver through the NASCLA Commercial General Building Contractor exam passed within the past three years, a current examined license held a year or more in Alabama, Georgia, Mississippi or North Carolina, or a current South Carolina General Contractor license in the Building (BD) or Limited Building (LB) classification..
  2. 2Law / code exam. Pass a law, rules, or code exam. Business Management and Law portion of the South Carolina Residential Builder examination, administered by PSI at https://test-takers.psiexams.com/scrb/. It is required on every route, including both exam-waiver routes. Examination eligibility lasts one year and allows three attempts in a twelve-month period; after three failures the applicant waits twelve months (S.C. Code Section 40-59-220(E))..
  3. 3Exam fee. Pay the exam fee. Examination fees are paid directly to PSI. The Commission does not publish the amounts; they are in PSI’s South Carolina Residential Builder candidate information at https://test-takers.psiexams.com/scrb/, or ask the Commission at [email protected] or (803) 896-4696..
  4. 4Application fee. Pay the application fee ($135). Non-refundable $135 application fee, by check or money order payable to SCRBC, or paid online through the Commission’s electronic application. A returned-check fee of up to $30 may be charged. The application stays open for one year from the date it is received; if everything is not in by then the process starts over..
  5. 5License fee. Pay the license or certificate fee ($220). Residential Builder (RBB) license fee of $220, paid once the Commission approves the application. Renewal is $220, the renewal late fee is $50 and reinstatement of a lapsed license is $480..
  6. 6Surety bond. Post a surety bond ($15,000). Surety bond of at least $15,000 on the Commission’s approved form, required by S.C. Code Section 40-59-220(C). The individual’s name must be listed as principal; the bond cannot be in a company or business name. The original must carry the surety’s signature, the principal’s signature, a visible surety company seal and the attached power of attorney. DocuSign signatures and handwritten bonds are not accepted. The Commission publishes a list of surety companies authorized in South Carolina as a starting point..
  7. 7Financial responsibility. Show financial responsibility. A complete credit report from TransUnion, Equifax or Experian dated no more than 30 days before the application date, required by S.C. Code Section 40-59-250 and reviewed for liens and outstanding judgments. The application also asks you to list any outstanding judgments against you or entities you were associated with in the past five years. The Commission does not publish a minimum score, net worth or working capital figure for a Residential Builder license; ask at [email protected] or (803) 896-4696..
  8. 8Business license. Obtain a business license. Company details are only needed if you will trade under a company name. You must own at least 51 percent of the company to list it on your license; if you own less, the company applies separately for a residential business Certificate of Authorization. A South Carolina company attaches a Certificate of Existence (or Good Standing) from the SC Secretary of State and a company formed elsewhere attaches a Certificate of Authority, together with the articles of incorporation or organization and proof of ownership percentages..
  9. 9Other. Application paperwork: a copy of your driver’s license, state-issued ID, passport or military ID, a copy of your Social Security card, a notarized Verification of Lawful Presence form, legal name-change documents if applicable, and an explanatory statement with supporting documents for any "yes" answer on the disclosure questions..
  10. 10Other. Proof of the NASCLA Commercial General Building Contractor exam (a copy of your transcript) if you are using that waiver, plus a Verification of Licensure sent directly to the Commission by each state where you hold or have held a residential builder license or a license in a building-related profession..

Published fees on this path total $355, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam · if applicable
  • Law / code exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $15,000

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How South Carolina licenses residential contractors

South Carolina residential contractor · “Residential Builder License (RBB); limited "Residential Builder Exam Waiver" license on the waiver routes

Statewide license

Verified September 17, 2026· 4 sources

Issued by South Carolina Residential Builders Commission (SC LLR)

South Carolina licenses residential builders statewide through the Residential Builders Commission, a separate body from the Contractor’s Licensing Board that handles commercial work. A residential builder is anyone who constructs or superintends the construction, repair or improvement of a residential building not over three floors high and with no more than sixteen units in any single apartment building, where the undertaking costs more than $5,000. Unlike the commercial license, this one is held by the person: the $15,000 surety bond must name the individual as principal and cannot be in a company name, and you may only put a company on your license if you own at least 51 percent of it, otherwise the company applies for its own residential business Certificate of Authorization. Entry needs one year of residential building experience within the past five years, a credit report, the bond and both parts of the PSI examination. The technical part can be waived three ways: a current South Carolina General Contractor license in the Building (BD) or Limited Building (LB) classification, a current examined license held a year or more in Alabama, Georgia, Mississippi or North Carolina, or the NASCLA Commercial General Building Contractor exam passed within the past three years. A license issued on any of those waiver routes is a limited one that does not allow the holder to perform the mechanical trades.

Moving to South CarolinaLeaving South Carolina

Why Texas has nothing to transfer

Texas residential contractor

Licensed by cities and counties

Verified September 17, 2026· 15 sources

Texas issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build houses. The Texas Residential Construction Commission, which registered builders and remodelers from 2003, was abolished and its Act expired on September 1, 2009, and nothing replaced it. What Texas does license are individual trades: electricians and air conditioning and refrigeration contractors through the Texas Department of Licensing and Regulation, and plumbers through the Texas State Board of Plumbing Examiners, so a builder who self-performs that work needs the matching state license. Residential contracting itself is regulated, where at all, by cities through registration, insurance, bonding and permitting: San Antonio, Fort Worth, El Paso, Dallas and Austin all require a residential builder or home-improvement contractor to register before pulling a permit, while Houston states that general contractors are not required to be licensed. A builder moving to Texas therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city where they build, carrying the insurance and bonds those cities require, and hiring or becoming state-licensed trades. The one credential that does travel is a national ICC certification, which San Antonio accepts from the registration holder or a designated Certified Agent.

How local licensing works in Texas

How it works in Texas. There is no state license, no state application and no state exam for residential contractors. Cities control who may pull a residential building permit, and each city sets its own rules, so a builder registers separately in every jurisdiction where they work. Registration is about identity, insurance, bonding and (in one city) a national certification - not about trade competence testing, and not about what license you held in your last state. Nothing an out-of-state residential contractor holds gives a discount on any of it.

San Antonio. Development Services runs the most demanding residential program in the state, under Chapter 10-115 of the Code of Ordinances, with two registrations. A Residential Building Contractor registration covers 'the constructing, structural alteration, or enlarging any one or two-family detached dwelling' (new homes, additions, foundations, roofing, pools and spas, fences, minor repairs). It requires an FBI criminal history record dated within 30 days of submittal, liability insurance of at least $500,000 per occurrence, $1,000,000 aggregate and $500,000 aggregate for products and completed operations with the City of San Antonio as certificate holder, and a certification: 'either the registration holder or one agent affiliated with the contractor must obtain a Residential ICC Certification or other certifications approved by the Building Official; or the company has a minimum of 5 years of continued registration with no violations ... suspensions, or revocation.' The fee is $170 and the term is two years. A Home Improvement Contractor registration covers 'nonstructural repair, replacement, remodeling, alteration, conversion, or modernization to any existing building', needs the same FBI background check and insurance of at least $300,000 per occurrence and $600,000 aggregate, costs $150 for two years, and carries no certification requirement. Both applications ask whether the applicant has lost or been suspended from home improvement or residential building privileges in any Texas jurisdiction. Apply through the BuildSA portal or in person at 1901 S. Alamo Street; customer service is (210) 207-1111.

Dallas. Building Inspection registers general contractors on one form, and its own note defines the category broadly: 'A General Contractor includes, but is not limited to, the following: residential general contractor, commercial general contractor, roofing contractor, fence contractor, foundation contractor, demolition contractor and pool contractor.' The form states an annual registration or renewal fee of $120.00 and requires a contracting company addressed inside the city limits to give a Certificate of Occupancy number or have a home office form on file. The responsible party assigns PINs to the company staff allowed to sign permit applications. There is no exam and no experience requirement. Registrations are renewed in person at a Building Inspection office or online through DallasNow; call (214) 948-4480.

Fort Worth. Development Services requires that 'any firm, business, individual or organization obtaining a permit related to the building, mechanical, plumbing or electrical provisions' of the city codes hold a valid Contractor Registration, with a carve-out for a single-family homeowner working on their own residence. A residential builder registers as a Building Contractor: the completed application plus a copy of a valid driver's license, $168.75, expiring one year from the date of issuance. No trade license, exam or experience documentation is required for that type. Customer service is 817-392-2222.

El Paso. Planning and Inspections registers a General Contractor for 'New Residential, Additions, Alterations, and Roofing' as well as commercial work. The packet is an Assumed Name Certificate or corporate documents, the Contractor Registration Application, a certificate of general liability insurance of at least $100,000 with the City of El Paso as certificate holder, and a blanket building construction bond - the current application states $50,000 for general contractors, while the city's requirements sheet lists $25,000 (confirm the amount with the One Stop Shop before buying the bond). A $10,000 blanket bond covers a defined list of minor work such as fences, tents, temporary signs and patch-and-paint. The requirements sheet lists a $102.00 annual fee. The application 'must be filed annually to be eligible to obtain permits from the City of El Paso in accordance with Section 18.02.104.5 of the El Paso City Code.' One Stop Shop, 811 Texas Avenue, 915-212-0104.

Austin. Development Services is explicit that 'in Texas, anyone can be a General Contractor, including homeowners, and a state license is not required', but the general contractor named on a building permit must first register with Building and Trade Contractor Services through an Austin Build + Connect (AB+C) portal account, submitting the web registration form and a Letter of Authorization. General contractors register once and update only when their name, address or authorized agents change; the city publishes no fee for the registration.

Houston. Houston requires nothing of a residential builder. Its Residential Permitting 101 guide states that 'the building permit may be purchased by the owner, agent, contractor. General Contractors are not required to be licensed', and the plan review page repeats that 'a general contractor's license is not required to obtain building permits.' What Houston does require is that the trades register their state licenses with the city: a TDLR-licensed Master Electrician, a TDLR Class A or B air conditioning contractor and a TSBPE-licensed Master Plumber must each be registered with the City of Houston before buying a trade permit, and a sidewalk or driveway permit needs a contractor with a $2,000 surety bond.

Everywhere else. Smaller Texas cities and unincorporated county areas vary widely; many require only a permit and proof of insurance, and counties generally have no building-permit authority at all outside a city's limits and extraterritorial jurisdiction. Check the building or development services department of each city before contracting there.

Moving to TexasLeaving Texas

Common questions

Do I have to take the South Carolina residential contractor exam if I'm licensed in Texas?
The trade exam is waived, but South Carolina requires a law or code exam.
What does it cost to get a South Carolina residential contractor license from Texas?
Published fees on this path total $355, not counting exam vendor fees or bonds.
Do my Texas work hours count in South Carolina?
Yes. Documented out-of-state experience counts toward South Carolina's eligibility requirements.
Does it work the other way, from South Carolina to Texas?
Not necessarily. Reciprocity is directed. Going from South Carolina to Texas, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. S.C. Code of Laws Title 40, Chapter 59 - Residential Builders and Residential Specialty Contractors · S.C. Code Ann. Sections 40-59-20, 40-59-30, 40-59-220, 40-59-230, 40-59-250, 40-59-410 · South Carolina Legislature · Statute · verified September 17, 2026
  3. South Carolina Residential Builders Commission - home page · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 17, 2026
  4. SC Residential Builders Commission - Residential Builder License Application, Requirements and Instructions (Rev. 01/2026) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 17, 2026
  5. SC Residential Builders Commission - Residential Builder License (licensure by exam, licensure by exam waiver, fees) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related