Texas to Tennessee: residential contractor license reciprocity
Texas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Tennessee's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
BC-A Residential license by examination (states without a trade exam waiver)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A residential contractor arriving from a state that has no trade exam waiver agreement with Tennessee gets no examination credit for the license held elsewhere. The applicant entity files the Initial New Contractor Application online, names a Qualifying Agent, supplies a CPA-reviewed or CPA-audited financial statement, proof of general liability and workers' compensation insurance, a Letter of Reference and a notarized Contractor's Affidavit, and the Qualifying Agent sits both the Tennessee Business and Law examination and the BC-A Residential trade examination. What does carry across state lines is experience: the Board sets the classification and the monetary limit partly on documented experience running projects of the size requested, the application expressly allows experience earned in other states or while working for other contractors, and the Board generally looks for about three years. Tennessee does not accept the NASCLA Accredited Examination at this level; the Board maps it to the commercial BC-B classification. Applications are decided at Board meetings, which are held at least six times a year.
Contractors building single-family homes for $125,000 or less can take the restricted residential route instead: a three-day Board-approved Limited Residential course at a Tennessee community college or vocational school replaces both the BC-A trade examination and the Business and Law examination, and the license is issued as BC-A/r. That license needs a positive working capital and net worth, carries no 10% bid tolerance, and does not allow joint ventures or home inspections; raising the limit or adding a classification later requires the examinations and a reviewed financial statement. Separately, a Home Improvement license rather than a contractor license covers residential improvement contracts of $3,000 to $24,999 in Bradley, Davidson, Hamilton, Haywood, Knox, Marion, Robertson, Rutherford and Shelby counties; that license needs a $10,000 surety bond or equivalent security and no trade exam waiver can be used for it. The Board does not publish a processing time; the Board office is (615) 741-8307 or (800) 544-7693.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- Documented construction experience appropriate to the classification and monetary limit requested. Tennessee sets no fixed minimum number of years, but the Board states it prefers about three years and weighs experience, plant and equipment when it assigns a classification.Experience may be shown through previous employment, volunteer work, internships, education or training, evidenced by letters of recommendation, certificates, diplomas or employment verification, and may have been earned working for other contractors or in another state.
- The Qualifying Agent who holds the out-of-state credential is an owner, officer or full-time employee of the Tennessee applicant entity; a Qualifying Agent who is not an owner files a Power of Attorney with the application.
What you'll do to get licensed in Tennessee
- 1Trade exam. Pass the destination's trade exam. Tennessee BC-A Residential trade examination, administered after the Board approves the application. It is open book, 100 questions, 300 minutes, 73% to pass..
- 2Law / code exam. Pass a law, rules, or code exam. Tennessee Business and Law examination, taken by the Qualifying Agent after the Board approves the application. It is open book, 50 questions, 140 minutes, 73% to pass, and is drawn from the Contractors' Guide to Business, Law and Project Management, Tennessee Edition. It is not waived by any trade exam waiver agreement or by the NASCLA examination; the only contractor license that does not require it is the restricted residential BC-A/r. Examination scores are typically treated by the Board as valid for two years..
- 3Application fee. Pay the application fee ($250). Non-refundable application and initial license fee of $250, paid with the Initial New Contractor Application at core.tn.gov (Tenn. Comp. R. & Regs. 0680-01-.20(1)). The license renews every two years at $200, with a $20 per month late penalty for up to twelve months..
- 4Exam fee. Pay the exam fee. Examination fee, paid to the testing company rather than to the Board. The Board's rule sets the fee as whatever the administering company charges subject to Board approval, so no amount is published by the Board; Prov began administering Tennessee contractor examinations on July 1, 2026 and publishes the current fee when an examination is booked. One fee is charged for each examination taken..
- 5Financial responsibility. Show financial responsibility. Financial statement prepared by a licensed public accountant or CPA on the accountant's letterhead, in the name of the applicant entity, conforming to GAAP and dated no more than twelve months before the application. There is no fixed minimum dollar figure: the monetary limit on the license is set at ten times the lesser of working capital and net worth, supported by experience, so a $150,000 limit needs $15,000 of each and an unlimited license needs $300,000 of each. A reviewed opinion is required for a limit of $3,000,000 or less and an audited opinion above that. A line of credit or a Board Guaranty Agreement may be used to supplement working capital or net worth..
- 6Surety bond. Post a surety bond (if applicable). Optional alternative to the CPA-reviewed or CPA-audited financial statement: from July 1, 2026 the Board accepts a Contractors' Surety Bond on the Board's own form in an amount of at least 50% of the monetary limit requested. A bond or Guaranty Agreement may also be required in addition to the financial statement where the statement is primarily cash without fixed assets or where a parent company guarantees the applicant..
- 7Insurance. Carry the required insurance ($100,000). Certificate of general liability insurance in the same name as the license, listing the Board as certificate holder. The Board's minimum coverage is set by the monetary limit requested: $100,000 of coverage for a limit up to $500,000, $500,000 of coverage for a limit of $501,001 to $1,500,000, and $1,000,000 of coverage above $1,500,001 to unlimited. Workers' compensation insurance is also required unless the business has no employees and qualifies for an exemption or registers as a Construction Services Provider. The amount shown is the lowest coverage tier..
- 8Business license. Obtain a business license. The license is issued to a legal entity in its exact name, so the corporation, LLC or limited partnership must be registered with the Tennessee Secretary of State before the license is issued; an entity formed in another state registers as a foreign entity and files its Certificate of Authority or Articles of Organization. A separate business tax license from the Tennessee Department of Revenue is needed for each city or county the contractor operates in..
- 9Other. Letter of Reference on the Board's form from a past client, employer or code official who can speak to construction experience; it may be from outside Tennessee but may not come from a relative, and only one is needed. Also required: a Contractor's Affidavit signed and notarized by the Qualifying Agent, owners, partners, members, main officers and major stockholders, a statement of experience and management information, and a list of equipment. An interview at a Board meeting may be required, for example where the Qualifying Agent is not a majority owner and has been employed less than six months, where the experience shown is thin for the limit requested, or where there is complaint, judgment, bankruptcy or felony history..
Published fees on this path total $250, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Law / code exam
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $100,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Tennessee licenses residential contractors
Tennessee residential contractor · “Contractor license, BC-A Residential classification (BC-A/r restricted under $125,000)”
Statewide license
Issued by Tennessee Board for Licensing Contractors (Department of Commerce and Insurance)
Tennessee licenses contractors at state level, and the residential tier is the BC-A classification issued by the Board for Licensing Contractors under T.C.A. Title 62, Chapter 6. A contractor license must be in hand before bidding on, offering on or contracting for a project of $25,000 or more, and BC-A covers construction, remodeling, repair or improvement of one-, two-, three- and four-family residences not exceeding three stories, plus accessory structures. The license belongs to the business rather than to the person: it is issued to a sole proprietor, corporation, LLC or partnership in that entity's exact name and is qualified by a named Qualifying Agent, an owner, officer or full-time employee who personally passes the examinations, so an inbound builder applies as or for the entity that will sign contracts. Every license also carries a monetary limit, the largest single contract the licensee may take, set at ten times the lesser of the applicant's working capital and net worth as shown on a CPA-reviewed or CPA-audited financial statement, together with documented experience on projects of that size. Contractors building single-family homes for $125,000 or less may instead hold the restricted BC-A/r license, which replaces both examinations with a three-day Board-approved course at a Tennessee community college or vocational school. Residential improvement work between $3,000 and $24,999 in nine named counties falls under the Board's separate Home Improvement license instead of this one.
Why Texas has nothing to transfer
Texas residential contractor
Licensed by cities and counties
Texas issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build houses. The Texas Residential Construction Commission, which registered builders and remodelers from 2003, was abolished and its Act expired on September 1, 2009, and nothing replaced it. What Texas does license are individual trades: electricians and air conditioning and refrigeration contractors through the Texas Department of Licensing and Regulation, and plumbers through the Texas State Board of Plumbing Examiners, so a builder who self-performs that work needs the matching state license. Residential contracting itself is regulated, where at all, by cities through registration, insurance, bonding and permitting: San Antonio, Fort Worth, El Paso, Dallas and Austin all require a residential builder or home-improvement contractor to register before pulling a permit, while Houston states that general contractors are not required to be licensed. A builder moving to Texas therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city where they build, carrying the insurance and bonds those cities require, and hiring or becoming state-licensed trades. The one credential that does travel is a national ICC certification, which San Antonio accepts from the registration holder or a designated Certified Agent.
How local licensing works in Texas
How it works in Texas. There is no state license, no state application and no state exam for residential contractors. Cities control who may pull a residential building permit, and each city sets its own rules, so a builder registers separately in every jurisdiction where they work. Registration is about identity, insurance, bonding and (in one city) a national certification - not about trade competence testing, and not about what license you held in your last state. Nothing an out-of-state residential contractor holds gives a discount on any of it.
San Antonio. Development Services runs the most demanding residential program in the state, under Chapter 10-115 of the Code of Ordinances, with two registrations. A Residential Building Contractor registration covers 'the constructing, structural alteration, or enlarging any one or two-family detached dwelling' (new homes, additions, foundations, roofing, pools and spas, fences, minor repairs). It requires an FBI criminal history record dated within 30 days of submittal, liability insurance of at least $500,000 per occurrence, $1,000,000 aggregate and $500,000 aggregate for products and completed operations with the City of San Antonio as certificate holder, and a certification: 'either the registration holder or one agent affiliated with the contractor must obtain a Residential ICC Certification or other certifications approved by the Building Official; or the company has a minimum of 5 years of continued registration with no violations ... suspensions, or revocation.' The fee is $170 and the term is two years. A Home Improvement Contractor registration covers 'nonstructural repair, replacement, remodeling, alteration, conversion, or modernization to any existing building', needs the same FBI background check and insurance of at least $300,000 per occurrence and $600,000 aggregate, costs $150 for two years, and carries no certification requirement. Both applications ask whether the applicant has lost or been suspended from home improvement or residential building privileges in any Texas jurisdiction. Apply through the BuildSA portal or in person at 1901 S. Alamo Street; customer service is (210) 207-1111.
Dallas. Building Inspection registers general contractors on one form, and its own note defines the category broadly: 'A General Contractor includes, but is not limited to, the following: residential general contractor, commercial general contractor, roofing contractor, fence contractor, foundation contractor, demolition contractor and pool contractor.' The form states an annual registration or renewal fee of $120.00 and requires a contracting company addressed inside the city limits to give a Certificate of Occupancy number or have a home office form on file. The responsible party assigns PINs to the company staff allowed to sign permit applications. There is no exam and no experience requirement. Registrations are renewed in person at a Building Inspection office or online through DallasNow; call (214) 948-4480.
Fort Worth. Development Services requires that 'any firm, business, individual or organization obtaining a permit related to the building, mechanical, plumbing or electrical provisions' of the city codes hold a valid Contractor Registration, with a carve-out for a single-family homeowner working on their own residence. A residential builder registers as a Building Contractor: the completed application plus a copy of a valid driver's license, $168.75, expiring one year from the date of issuance. No trade license, exam or experience documentation is required for that type. Customer service is 817-392-2222.
El Paso. Planning and Inspections registers a General Contractor for 'New Residential, Additions, Alterations, and Roofing' as well as commercial work. The packet is an Assumed Name Certificate or corporate documents, the Contractor Registration Application, a certificate of general liability insurance of at least $100,000 with the City of El Paso as certificate holder, and a blanket building construction bond - the current application states $50,000 for general contractors, while the city's requirements sheet lists $25,000 (confirm the amount with the One Stop Shop before buying the bond). A $10,000 blanket bond covers a defined list of minor work such as fences, tents, temporary signs and patch-and-paint. The requirements sheet lists a $102.00 annual fee. The application 'must be filed annually to be eligible to obtain permits from the City of El Paso in accordance with Section 18.02.104.5 of the El Paso City Code.' One Stop Shop, 811 Texas Avenue, 915-212-0104.
Austin. Development Services is explicit that 'in Texas, anyone can be a General Contractor, including homeowners, and a state license is not required', but the general contractor named on a building permit must first register with Building and Trade Contractor Services through an Austin Build + Connect (AB+C) portal account, submitting the web registration form and a Letter of Authorization. General contractors register once and update only when their name, address or authorized agents change; the city publishes no fee for the registration.
Houston. Houston requires nothing of a residential builder. Its Residential Permitting 101 guide states that 'the building permit may be purchased by the owner, agent, contractor. General Contractors are not required to be licensed', and the plan review page repeats that 'a general contractor's license is not required to obtain building permits.' What Houston does require is that the trades register their state licenses with the city: a TDLR-licensed Master Electrician, a TDLR Class A or B air conditioning contractor and a TSBPE-licensed Master Plumber must each be registered with the City of Houston before buying a trade permit, and a sidewalk or driveway permit needs a contractor with a $2,000 surety bond.
Everywhere else. Smaller Texas cities and unincorporated county areas vary widely; many require only a permit and proof of insurance, and counties generally have no building-permit authority at all outside a city's limits and extraterritorial jurisdiction. Check the building or development services department of each city before contracting there.
- San Antonio (Development Services - Residential Building Contractor and Home Improvement Contractor registration)
- Dallas (Building Inspection - General Contractor registration)
- Fort Worth (Development Services - Building Contractor registration)
- El Paso (Planning and Inspections - General Contractor registration)
- Austin (Development Services - Building and Trade Contractor Services registration)
- Houston (Houston Permitting Center - no general contractor license required; trade registration only)
Common questions
- Do I have to take the Tennessee residential contractor exam if I'm licensed in Texas?
- Yes. Tennessee requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Tennessee residential contractor license from Texas?
- Published fees on this path total $250, not counting exam vendor fees or bonds.
- Do my Texas work hours count in Tennessee?
- Yes. Documented out-of-state experience counts toward Tennessee's eligibility requirements.
- Does it work the other way, from Tennessee to Texas?
- Not necessarily. Reciprocity is directed. Going from Tennessee to Texas, the mechanism is not applicable.
Sources
- Tennessee Board for Licensing Contractors - Contractor License Application Package and Instructions · T.C.A. Sections 62-6-111, 62-6-120 · Tennessee Board for Licensing Contractors · Form · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Classification Outline · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Exam Information · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Fees · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Get a Contractor License · T.C.A. Title 62, Chapter 6 · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Home Improvement License · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Trade Exam Waiver (Reciprocity) with Tennessee and Request for Contractor License Verification (Rev. 06/2026) · Tennessee Board for Licensing Contractors · Agreement Document · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Candidate Information Bulletin · PSI Services LLC for the Tennessee Board for Licensing Contractors · Other · verified September 17, 2026
- Rules of the Tennessee Board for Licensing Contractors, Chapter 0680-01 Licensing (November 2025 revision) · Tenn. Comp. R. & Regs. 0680-01-.02, -.12, -.13, -.16, -.20, -.29, -.30, -.32 · Tennessee Secretary of State, Division of Publications · Admin Rule · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.