LicensebyState

Texas to Wisconsin: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 14 sources

Texas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Wisconsin's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

No credit for an out-of-state contractor license (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Wisconsin publishes no reciprocity, endorsement or exam-waiver route for contractors, and a residential builder's license from another state earns no credit toward either Wisconsin credential. The only reciprocity provision in the DSPS trades rules, SPS 305.47, is limited to electricians and electrical contractors under Wis. Stat. 101.874, and the service-member and spouse reciprocal credential in Wis. Stat. 440.09 reaches only credentials issued under chapters 440 to 480, which does not include these chapter 101 trades certifications. There is also nothing to waive on the examination side: DSPS administers no examination for the dwelling credentials, and the fee table in SPS 305.02 carries no examination fee for any of them. An applicant arriving from any state therefore takes exactly the route a Wisconsin resident takes: 12 hours of an approved initial qualifier course finished within the year before applying for the Qualifier certification, and bond or liability insurance plus the worker's compensation and unemployment compensation attestations for the Dwelling Contractor certification, both filed in LicensE at license.wi.gov. Wisconsin sets no minimum years of experience and no apprenticeship for either credential, so documented out-of-state work neither shortens nor replaces a step, and several approved qualifier courses are delivered online, which means the course can be taken before the move.

The law exam flag here means the tests built into the approved 12-hour initial qualifier course, which Wis. Admin. Code SPS 305.315(2)(c) requires to cover construction laws, construction codes and construction business practices. DSPS itself gives no proctored trade or business-and-law examination for these credentials. Wis. Stat. 101.654(1m)(b)3. separately provides for an examination developed by the department on the required continuing education courses for anyone who did not hold a certificate of financial responsibility on 11 April 2006; SPS 305.02's fee table shows no examination fee for the dwelling credentials and neither DSPS form mentions a test date, so ask DSPS on (608) 266-2112 how that provision is applied before you plan around it. Wis. Stat. 101.654(3)(a)3., added in 2021, also requires 12 hours of department-approved education on accounting, lien law, ethics and best business practices for the certificate of financial responsibility; the Dwelling Contractor page and Form 3096 describe only the financial-responsibility and attestation items, so confirm with DSPS which course satisfies it. A contractor who already holds a current DSPS trades license and pulls a permit for work that license covers is exempt from the continuing education requirement under Wis. Stat. 101.654(1)(c)2.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Do not count

What you must already have

  • The approved 12-hour initial qualifier course in dwelling construction must have been completed within one year before the date of the Dwelling Contractor Qualifier application. A course finished earlier than that does not count and has to be retaken.Wis. Admin. Code SPS 305.315(2)(c) and DSPS Form 3097. Verification of completion is uploaded with the application in LicensE.
  • Wisconsin sets no minimum trade experience, apprenticeship or period of prior licensure for either dwelling credential, and credits nothing toward them for an out-of-state contractor license, an out-of-state examination or documented out-of-state projects.Neither Wis. Stat. 101.654 nor Wis. Admin. Code SPS 305.31 and SPS 305.315 contains an experience requirement or an out-of-state recognition clause, and DSPS Forms 3096 and 3097 list no experience table and no reciprocity category. Wisconsin also does not accept the NASCLA Accredited Examination, which is not surprising given that it holds no examination of its own here.
  • The Dwelling Contractor certification is applied for by a named principal: the owner of the contracting business, a partner applying on behalf of a partnership, or the chairman of the board or chief executive officer applying on behalf of a corporation.Wis. Admin. Code SPS 305.31(3)(b) and DSPS Form 3096, item 2. Under SPS 305.02(4)(a) a business operating from several locations under one federal employer identification number needs only one dwelling contractor certification.

What you'll do to get licensed in Wisconsin

  1. 1Law / code exam. Pass a law, rules, or code exam. At least 12 hours in a DSPS-approved initial qualifier course in dwelling construction, completed within one year before the Dwelling Contractor Qualifier application. The course must include instruction and one or more tests on construction laws, construction codes and construction business practices. DSPS publishes a list of approved course providers rather than individual courses, and directs questions about a course to the provider; several providers deliver the 12 hours online, so it can be finished before you move to Wisconsin. DSPS holds no examination of its own for this credential and charges no examination fee for it..
  2. 2Application fee. Pay the application fee ($15). Application fee for the Dwelling Contractor Qualifier certification, set at $15 by Wis. Admin. Code SPS 305.02, Table 305.02. Fees are calculated and paid in LicensE at license.wi.gov when the application is filed..
  3. 3License fee. Pay the license or certificate fee ($30). Certification fee for the Dwelling Contractor Qualifier, $30 under Table 305.02. The Qualifier certification runs for two years from the date of issuance (Table 305.06) and renews for $30, with a $25 late continuing education fee where that applies and a $200 reinstatement fee if it has lapsed..
  4. 4Application fee. Pay the application fee ($15). Application fee for the Dwelling Contractor certification, set at $15 by Table 305.02. It is separate from the Qualifier application fee, because a contractor who is both the business principal and the qualifier is applying for two credentials..
  5. 5License fee. Pay the license or certificate fee ($25). Certification fee for the Dwelling Contractor certification, $25 under Table 305.02, and the same $25 for the Dwelling Contractor Restricted version. The certification is valid for one year from the date of issuance and renews annually for $25; a certification expired more than a year needs a fresh application, supporting documents and a $200 reinstatement fee..
  6. 6Insurance. Carry the required insurance. Proof of financial responsibility, satisfied either by a general liability policy insuring the applicant for at least $250,000 per occurrence for bodily injury to or death of others or damage to the property of others, or by the surety bond below. The insurer must be authorized to do business in Wisconsin or eligible as a surplus lines insurer in one or more states. The policy may not be canceled except on 30 days' written notice to DSPS, or 10 days for nonpayment of premium, and proof of replacement cover must be filed inside that window or DSPS suspends the certification without a hearing. The application also carries attestations that the business complies with Wisconsin worker's compensation law (Wis. Stat. ch. 102) and unemployment compensation law (Wis. Stat. ch. 108)..
  7. 7Surety bond. Post a surety bond (if applicable). A surety bond endorsed by a company authorized to do business in Wisconsin is the alternative to the liability policy. DSPS's Form 3096 asks for a bond of at least $25,000 for the full Dwelling Contractor certification; the statutory floor in Wis. Stat. 101.654(2)(a)1. is $5,000, and an applicant using a bond of less than $25,000 is issued the Dwelling Contractor Restricted certification instead and agrees not to work on any dwelling whose estimated cost of completion is greater than the bond amount. The bond runs in the name of the state for the benefit of anyone who suffers a loss from a breach of the one- and two-family dwelling code, and carries the same 30-day cancellation notice rule as the insurance policy..
  8. 8Continuing education. Complete continuing education. At least 12 hours of DSPS-approved continuing education before the Qualifier certification expires. Wis. Stat. 101.654(1m)(b)1. requires those 12 hours every two years and requires at least 4 of them to be on construction laws and codes and on contracts, liability and risk management. Credit comes from seminars and workshops attended in person or by remote classroom, from teaching a program (first offering only), from webinars and other distance courses, and from technical or professional society meetings, which are capped at 6 hours per renewal cycle. A distance course needs at least 10 review questions per credit hour, and a question-and-answer course at least 30 questions per credit hour with a passing score of 70 percent. DSPS may approve continuing education courses offered by other states..
  9. 9Background check. Complete a background check. DSPS Form 2255, Trades Convictions and Pending Charges, is filed with the application where it applies. Wis. Stat. 101.654(5) lets the department revoke or suspend the certification for a conviction of a crime related to the construction of a dwelling, for building without a required permit, for failing the continuing education requirement, or for having been adjudged bankrupt on two or more occasions..
  10. 10Other. Both applications are filed in the LicensE portal at license.wi.gov, with the initial qualifier course verification and the bond or insurance certificate uploaded there; anything DSPS asks for later must be uploaded within three months or the application may have to be refiled and the fees paid again. Once certified, the holder may not start construction until the uniform building permit under SPS 320.08 is issued by the municipality, and may not start a private onsite wastewater treatment system until the sanitary permit under SPS 383.21 is issued. Milwaukee adds a City of Milwaukee Home Improvement Contractor License for work on single-family homes, duplexes and apartment buildings of six units or fewer, so check the requirements of the city or county that will issue your permits as well..

Published fees on this path total $85, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · if applicable

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

How Wisconsin licenses residential contractors

Wisconsin residential contractor · “Dwelling Contractor certification, with a Dwelling Contractor Qualifier

Statewide license

Verified September 17, 2026· 7 sources

Issued by Wisconsin Department of Safety and Professional Services (DSPS)

Wisconsin licenses housebuilding statewide through the Department of Safety and Professional Services, and it takes two separate credentials rather than one. Under Wis. Admin. Code SPS 305.31 no person may obtain a building permit for a one- or two-family dwelling unless that person holds a Dwelling Contractor certification (or a Dwelling Contractor Restricted certification) and holds, or employs, someone who holds a Dwelling Contractor Qualifier certification. The Dwelling Contractor certification is the business-side credential: it is applied for by the owner of the contracting business, a partner on behalf of a partnership, or the chairman of the board or chief executive officer on behalf of a corporation, and it is granted on attestations of worker's compensation and unemployment compensation compliance plus proof of financial responsibility, which is either a surety bond or a general liability policy of at least $250,000 per occurrence. The Dwelling Contractor Qualifier certification is the personal credential and the one that carries the coursework and the testing: the applicant must have completed at least 12 hours in a DSPS-approved initial qualifier course in dwelling construction within the year before applying, and that course must include one or more tests on construction laws, construction codes and construction business practices. A contractor moving to Wisconsin to build or remodel houses normally needs both, files both in the LicensE portal at license.wi.gov, and should note that these credentials reach one- and two-family dwellings only. Wisconsin issues no state license for general or commercial building work, and a homeowner who lives or will live in the dwelling is exempt from the Dwelling Contractor requirement for work on their own home.

Moving to WisconsinLeaving Wisconsin

Why Texas has nothing to transfer

Texas residential contractor

Licensed by cities and counties

Verified September 17, 2026· 15 sources

Texas issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build houses. The Texas Residential Construction Commission, which registered builders and remodelers from 2003, was abolished and its Act expired on September 1, 2009, and nothing replaced it. What Texas does license are individual trades: electricians and air conditioning and refrigeration contractors through the Texas Department of Licensing and Regulation, and plumbers through the Texas State Board of Plumbing Examiners, so a builder who self-performs that work needs the matching state license. Residential contracting itself is regulated, where at all, by cities through registration, insurance, bonding and permitting: San Antonio, Fort Worth, El Paso, Dallas and Austin all require a residential builder or home-improvement contractor to register before pulling a permit, while Houston states that general contractors are not required to be licensed. A builder moving to Texas therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city where they build, carrying the insurance and bonds those cities require, and hiring or becoming state-licensed trades. The one credential that does travel is a national ICC certification, which San Antonio accepts from the registration holder or a designated Certified Agent.

How local licensing works in Texas

How it works in Texas. There is no state license, no state application and no state exam for residential contractors. Cities control who may pull a residential building permit, and each city sets its own rules, so a builder registers separately in every jurisdiction where they work. Registration is about identity, insurance, bonding and (in one city) a national certification - not about trade competence testing, and not about what license you held in your last state. Nothing an out-of-state residential contractor holds gives a discount on any of it.

San Antonio. Development Services runs the most demanding residential program in the state, under Chapter 10-115 of the Code of Ordinances, with two registrations. A Residential Building Contractor registration covers 'the constructing, structural alteration, or enlarging any one or two-family detached dwelling' (new homes, additions, foundations, roofing, pools and spas, fences, minor repairs). It requires an FBI criminal history record dated within 30 days of submittal, liability insurance of at least $500,000 per occurrence, $1,000,000 aggregate and $500,000 aggregate for products and completed operations with the City of San Antonio as certificate holder, and a certification: 'either the registration holder or one agent affiliated with the contractor must obtain a Residential ICC Certification or other certifications approved by the Building Official; or the company has a minimum of 5 years of continued registration with no violations ... suspensions, or revocation.' The fee is $170 and the term is two years. A Home Improvement Contractor registration covers 'nonstructural repair, replacement, remodeling, alteration, conversion, or modernization to any existing building', needs the same FBI background check and insurance of at least $300,000 per occurrence and $600,000 aggregate, costs $150 for two years, and carries no certification requirement. Both applications ask whether the applicant has lost or been suspended from home improvement or residential building privileges in any Texas jurisdiction. Apply through the BuildSA portal or in person at 1901 S. Alamo Street; customer service is (210) 207-1111.

Dallas. Building Inspection registers general contractors on one form, and its own note defines the category broadly: 'A General Contractor includes, but is not limited to, the following: residential general contractor, commercial general contractor, roofing contractor, fence contractor, foundation contractor, demolition contractor and pool contractor.' The form states an annual registration or renewal fee of $120.00 and requires a contracting company addressed inside the city limits to give a Certificate of Occupancy number or have a home office form on file. The responsible party assigns PINs to the company staff allowed to sign permit applications. There is no exam and no experience requirement. Registrations are renewed in person at a Building Inspection office or online through DallasNow; call (214) 948-4480.

Fort Worth. Development Services requires that 'any firm, business, individual or organization obtaining a permit related to the building, mechanical, plumbing or electrical provisions' of the city codes hold a valid Contractor Registration, with a carve-out for a single-family homeowner working on their own residence. A residential builder registers as a Building Contractor: the completed application plus a copy of a valid driver's license, $168.75, expiring one year from the date of issuance. No trade license, exam or experience documentation is required for that type. Customer service is 817-392-2222.

El Paso. Planning and Inspections registers a General Contractor for 'New Residential, Additions, Alterations, and Roofing' as well as commercial work. The packet is an Assumed Name Certificate or corporate documents, the Contractor Registration Application, a certificate of general liability insurance of at least $100,000 with the City of El Paso as certificate holder, and a blanket building construction bond - the current application states $50,000 for general contractors, while the city's requirements sheet lists $25,000 (confirm the amount with the One Stop Shop before buying the bond). A $10,000 blanket bond covers a defined list of minor work such as fences, tents, temporary signs and patch-and-paint. The requirements sheet lists a $102.00 annual fee. The application 'must be filed annually to be eligible to obtain permits from the City of El Paso in accordance with Section 18.02.104.5 of the El Paso City Code.' One Stop Shop, 811 Texas Avenue, 915-212-0104.

Austin. Development Services is explicit that 'in Texas, anyone can be a General Contractor, including homeowners, and a state license is not required', but the general contractor named on a building permit must first register with Building and Trade Contractor Services through an Austin Build + Connect (AB+C) portal account, submitting the web registration form and a Letter of Authorization. General contractors register once and update only when their name, address or authorized agents change; the city publishes no fee for the registration.

Houston. Houston requires nothing of a residential builder. Its Residential Permitting 101 guide states that 'the building permit may be purchased by the owner, agent, contractor. General Contractors are not required to be licensed', and the plan review page repeats that 'a general contractor's license is not required to obtain building permits.' What Houston does require is that the trades register their state licenses with the city: a TDLR-licensed Master Electrician, a TDLR Class A or B air conditioning contractor and a TSBPE-licensed Master Plumber must each be registered with the City of Houston before buying a trade permit, and a sidewalk or driveway permit needs a contractor with a $2,000 surety bond.

Everywhere else. Smaller Texas cities and unincorporated county areas vary widely; many require only a permit and proof of insurance, and counties generally have no building-permit authority at all outside a city's limits and extraterritorial jurisdiction. Check the building or development services department of each city before contracting there.

Moving to TexasLeaving Texas

Common questions

Do I have to take the Wisconsin residential contractor exam if I'm licensed in Texas?
The trade exam is waived, but Wisconsin requires a law or code exam.
What does it cost to get a Wisconsin residential contractor license from Texas?
Published fees on this path total $85, not counting exam vendor fees or bonds.
Do my Texas work hours count in Wisconsin?
No. Wisconsin does not credit out-of-state hours on this path.
Does it work the other way, from Wisconsin to Texas?
Not necessarily. Reciprocity is directed. Going from Wisconsin to Texas, the mechanism is not applicable.

Sources

  1. City of Milwaukee Department of Neighborhood Services - Contractors: credentials required before permit issuance · Milwaukee Code of Ordinances 95-14 · City of Milwaukee Department of Neighborhood Services · Other · verified September 17, 2026
  2. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  3. NASCLA Accredited Examination for Commercial General Building Contractors - participating state agencies · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  4. Wisconsin DSPS - Approved Dwelling Contractor Qualifier Initial Qualifier Courses (provider list) · Wisconsin Department of Safety and Professional Services · Other · verified September 17, 2026
  5. Wisconsin DSPS - Dwelling Contractor · Wis. Admin. Code SPS 305.31; Wis. Stat. 101.654(1)(b), (1)(c)2. · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
  6. Wisconsin DSPS - Dwelling Contractor Qualifier · Wis. Admin. Code SPS 305.31, SPS 305.315; Wis. Stat. 101.654 · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
  7. Wisconsin DSPS - Dwelling Contractor Restricted · Wis. Admin. Code SPS 305.31; Wis. Stat. 101.654(2m) · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
  8. Wisconsin DSPS Form 3096 - Dwelling Contractor Application Information · Wisconsin Department of Safety and Professional Services · Form · verified September 17, 2026
  9. Wisconsin DSPS Form 3097 - Dwelling Contractor Qualifier Application Information · Wisconsin Department of Safety and Professional Services · Form · verified September 17, 2026
  10. Wisconsin DSPS - Trades Renewal Dates and Fees · Wisconsin Department of Safety and Professional Services · Other · verified September 17, 2026
  11. Wis. Admin. Code SPS 305.31 Dwelling contractor and SPS 305.315 Dwelling contractor qualifier · Wis. Admin. Code SPS 305.31, SPS 305.315 · Wisconsin Legislature · Admin Rule · verified September 17, 2026
  12. Wis. Admin. Code ch. SPS 305 - Licenses, Certifications and Registrations (Table 305.02 fees, Table 305.06 terms, SPS 305.47) · Wis. Admin. Code SPS 305.02 Table 305.02; SPS 305.06 Table 305.06; SPS 305.47 · Wisconsin Legislature · Admin Rule · verified September 17, 2026
  13. Wis. Stat. 101.654 - Contractor certification; education · Wis. Stat. 101.654 · Wisconsin Legislature · Statute · verified September 17, 2026
  14. Wis. Stat. 440.01 - Definitions (scope of "credential" for the ch. 440 reciprocal-credential provisions) · Wis. Stat. 440.01(2)(a); cf. Wis. Stat. 440.09 · Wisconsin Legislature · Statute · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related