Illinois to New Mexico: master electrician license reciprocity
Illinois does not issue a statewide master electrician license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state master or electrical contractor (all states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
An out-of-state master electrician or electrical contractor receives no exam waiver in New Mexico. The applicant files the qualifying party application with PSI ($36) and a notarized work-experience affidavit showing four years of experience in the EE-98 classification within the past ten years, then must pass the EE-98 trade exam (three parts, $269.06) and the Contractor's Business and Law exam ($68.88), or complete a commission-approved business and law course in place of that exam. Out-of-state experience is accepted on the affidavit. Once the certificate of qualification is issued, the individual or business applies for the EE-98 contractor's license ($30 application under 14.5.5 NMAC; $100 per year or $200 for two years) and must carry workers' compensation coverage.
The RLD page states the QP application fee as $36 and the license application fee as $36 plus license fees, while 14.5.5.8 NMAC states the contractor license application fee as $30; the amounts below follow the RLD page for the QP fee and the rule for the license fees. A contractor license in New Mexico may be held by an individual as sole proprietor. No official page describes a reciprocal agreement or exam waiver for qualifying parties from any state.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- Four years of practical or related trade experience in the EE-98 classification within the ten years immediately before application (NMSA 60-13-14(A)(8); 14.6.6.10(B)(1)(a) NMAC)
What you'll do to get licensed in New Mexico
- 1Application fee. Pay the application fee ($36). Qualifying party application fee paid to PSI, with notarized work-experience affidavit.
- 2Trade exam. Pass the destination's trade exam. EE-98 Residential and Commercial Electrical exam, three parts, administered by PSI.
- 3Exam fee. Pay the exam fee ($269.06). PSI fee for the three-part EE-98 exam; a single failed part is retaken for $89.69.
- 4Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam (required of all new candidates) or a commission-approved business and law course.
- 5Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam.
- 6Contractor license. Hold or obtain a contractor license ($30). EE-98 contractor's license application fee, non-refundable (14.5.5.8 NMAC).
- 7License fee. Pay the license or certificate fee ($200). EE-98 contractor's license fee, $100 per year or $200 for the two-year license term (14.5.5.8 NMAC).
- 8Insurance. Carry the required insurance. Workers' compensation coverage is required for all licensed entities.
Published fees on this path total $573.94, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee · $269.06
- Law / code exam
- Exam fee · $68.88
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
How New Mexico licenses master electricians
New Mexico master electrician · “EE-98 Electrical Contractor (qualifying party certificate of qualification)”
Statewide license
Issued by New Mexico Regulation and Licensing Department, Construction Industries Division (CID)
New Mexico has no license called 'master electrician'. Its highest electrical credential is the EE-98 electrical contractor classification (all electrical systems and wiring methods at 5,000 volts nominal or less), which is issued by CID in two parts: the contractor's license goes to the contracting entity, and a personal, non-transferable certificate of qualification goes to the qualifying party, the individual who passed the EE-98 three-part trade exam and the Contractor's Business and Law exam and is responsible for the licensee's code compliance. Because the certificate of qualification is held by a person and earned by examination, this site maps it to the master level. A qualifying party needs four years of experience in the classification within the ten years before application. CID publishes reciprocity only for EE-98J journeymen; no reciprocity or exam waiver is published for qualifying parties or EE-98 contractors, although NMSA 60-13-14(C) allows the division to enter into reciprocal agreements with states having equivalent requirements.
Why Illinois has nothing to transfer
Illinois master electrician
Licensed by cities and counties
Illinois does not issue a statewide master electrician license and has no state electrical board; the Illinois Department of Financial and Professional Regulation does not license electricians. The master-level credential exists only at the municipal level, under names that vary by city: Chicago issues a Supervising Electrician license (2 years of experience plus a written exam) and separately licenses Electrical Contractors, Springfield issues an Electrical License based on 5 years of experience and the ICC Master Electrician exam, and Peoria, Aurora, Naperville and Elgin accept ICC Master/Residential Electrician certificates or licenses from Illinois testing municipalities. An out-of-state master electrician license carries no state-level recognition in Illinois and none of the major jurisdictions publish a reciprocity or endorsement path for it. A master electrician from another state must apply with each municipality where they will work, which typically means passing the ICC or local exam once and then registering as an electrical contractor in each additional city.
How local licensing works in Illinois
How local licensing works. Illinois has no state electrician license and no state electrical board. The Illinois Municipal Code (65 ILCS 5/11-33-1) allows each municipality to require registration of electrical contractors, with an annual fee of $25, and provides that a contractor registered in one municipality cannot be required to register or pay a fee in another. Anything beyond registration (examinations, experience requirements, supervising or master licenses) comes from each city's or county's own ordinance.
Chicago. The Department of Buildings licenses Supervising Electricians (individuals) and Electrical Contractors (businesses); the supervising electrician is Chicago's equivalent of a master electrician. Eligibility for the supervising electrician exam is age 21 and at least 2 years of experience installing, altering, repairing and maintaining electrical wiring under a supervising electrician or equivalent, verified by supervisor letters. General and low-voltage exams are administered by Continental Testing Services (2026 fees: $150 per exam, $150 initial license, $150 annual renewal). An electrical contractor license ($150 initial, $150 renewal) is issued to a business, including a sole proprietorship, that is owned by or employs at least one licensed supervising electrician, who must perform or supervise all of the contractor's electrical work and may be the primary supervising electrician for only one contractor. Chicago's pages do not describe any reciprocity or endorsement for out-of-state licenses.
Springfield. The Building and Zoning Department issues an Electrical License to individuals who document 5 years of practical electrical experience with at least 2 years overseeing and directing electrical work and pass the ICC National Standard Master Electrician exam (W16). Applications go before the Springfield Electrical Commission; the fee is $25 and licenses expire December 31. A grandfather clause allows applicants licensed in another Illinois or out-of-state municipality with reciprocal testing to substitute proof of that exam only if the license was originally issued before 10/10/2007 and has not lapsed more than two years; otherwise the ICC exam is required.
Peoria. Electrical licenses are issued to individuals ($150 annual). Holders of Normal or Pekin licenses may register without testing; all others submit an ICC contractor exam certificate from the 2017 code cycle or newer.
Rockford. Registration only ($25 per calendar year, or free with proof of registration or license in another Illinois municipality); no exam.
Naperville and Aurora. Both accept current ICC certifications (Standard Master Electrician for commercial, Standard Residential Electrician for residential) or a license from a listed testing municipality (Naperville lists Chicago, Elgin, Libertyville, Orland Park, Ottawa, Peoria and Woodstock) in lieu of local testing. Naperville no longer renews or issues its own electrical licenses as of December 31, 2022 and registers electrical contractors through its Civic Access portal; Aurora requires a certificate of insurance naming the city.
Elgin. Requires a contractor's license from any Illinois city that gives a written NEC-based examination, or Elgin's own exam administered monthly through CLEC Enterprises.
Unincorporated Cook County. Electrical contractors must register with the Department of Building and Zoning ($150 initial, $75 annual renewal per trade), provide $1,000,000 general liability insurance naming the department, and submit a current supervising electrician's license from an Illinois city, town or village that has an electrical commission administering an examination.
Out-of-state holders. No reciprocity or endorsement path for other states' master licenses was found in any of these jurisdictions. The practical route is to pass the ICC National Standard Master Electrician exam (accepted by Springfield, Peoria, Aurora and Naperville) or a testing city's exam such as Chicago's, then register as an electrical contractor in each municipality where work will be performed.
Common questions
- Do I have to take the New Mexico master electrician exam if I'm licensed in Illinois?
- Yes. New Mexico requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a New Mexico master electrician license from Illinois?
- Published fees on this path total $573.94, not counting exam vendor fees or bonds.
- Do my Illinois work hours count in New Mexico?
- Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
- Does it work the other way, from New Mexico to Illinois?
- Not necessarily. Reciprocity is directed. Going from New Mexico to Illinois, the mechanism is not applicable.
Sources
- Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 · NMSA 1978 §§ 60-13-2(E), 60-13-14, 60-13-16, 60-13-38 · New Mexico Regulation and Licensing Department · Statute · verified September 15, 2026§60-13-2(E): a 'qualifying party' is an individual who submits to the examination for a license and is responsible for the licensee's compliance. §60-13-14(A)(8): a contractor license applicant needs four years of trade experience within the ten years before application. §60-13-14(C): the division, with the commission's consent, may enter into a reciprocal licensing agreement with any state having equivalent licensing requirements. §60-13-16: no certificate of qualification is issued until the individual passes the division's exam, which includes business/law and, for EE classifications, a technical exam; the certificate is not transferable. §60-13-38: journeymen must hold a certificate of competence obtained by examination; eligibility for the journeyman electrician exam requires four years of accredited training, apprenticeship or practical experience (two years commercial/industrial); 16 hours of continuing education per three-year code cycle for EE-98J.
- 14.5.5 NMAC - Fees (Construction Industries Division) · 14.5.5.8 and 14.5.5.9 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 15, 2026Non-refundable contractor's license application fee $30.00; license fee $100.00 per year or $200.00 for two years for the GA-98, GB-2, GB-98, GF-98, EE-98 and MM-98 classifications and $50.00 per year or $100.00 for two years for all other classifications (including MM-3). Journeyman certificate renewal fee $25.00 per year (14.5.5.9).
- 14.6.6 NMAC - Classification and Scope of Licenses and Certificates (mechanical and plumbing) · 14.6.6.10 and 14.6.6.11 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 15, 2026MM-3 Heating, Ventilation and Air Conditioning: four years of experience; scope is to 'install, alter, repair, service and maintain HVAC air handling and refrigeration equipment and piping, including fans, coils, condensing units, self-contained packaged air conditioning or heating units, evaporative cooling units, and ductwork' plus controls at 24 volts or less. MM-98 Mechanical (four years) covers MM-1 through MM-4 and the MS-3, MS-6, MS-12 and MS-14 specialties. Journeyman classifications: JR Journeyman Refrigeration (two years; 'must demonstrate compliance with environmental protection agency (EPA) recovery requirements before certificate may be issued'; works under MM-3, MM-4, MM-98 or JSM) and JSM Journeyman Sheet Metal (two years; works under MM-3 or MM-98).
- State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 15, 2026Text extracted from the PDF locally. Business and Law exam 'REQUIRED OF ALL NEW CANDIDATES' $68.88, or an approved Business and Law course may be taken instead; trade exams for MM-1, MM-2, MM-3, MM-4 and the MS specialties are $68.88 each, first time or retake. MM-3 Heat, Vent and Air Conditioning exam: 100 questions, 245 minutes, 75% (75 points) to pass, open book on the 2021 Uniform Mechanical Code, 2015 New Mexico Mechanical Code and Modern Refrigeration and Air Conditioning; content covers motors/controls, piping, heating and cooling equipment, refrigerants and refrigeration, and ductwork/ventilation. No reciprocity or out-of-state exam waiver is described.
- NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 15, 2026Section 'Reciprocal Journeyman in New Mexico': 'The only journeyman classification reciprocated in New Mexico is EE-98J, residential and commercial electrical'; no mechanical or refrigeration journeyman classification is reciprocated. Section 'Becoming a Qualifying Party': QP applicants need the required years of experience within the 10 years before application, must pass the classification exam(s) and a Contractor's Business and Law exam, must be pre-approved to schedule exams, and pay a $36 QP application and work-experience affidavit fee; the company license application fee is $36 plus license fees. No reciprocity is mentioned for qualifying parties or contractors.
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.