Indiana to Alabama: master electrician license reciprocity
Indiana does not issue a statewide master electrician license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Examination with documented out-of-state experience (states without an agreement)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A master electrician or electrical contractor from a state outside the Board's reciprocal list has no endorsement path: §34-36-7(b) and rule 303-X-3-.02(10) limit recognition to states on the Board's approved reciprocal list. The applicant instead files the Electrical Contractor Examination Application (ECE-1) and documents a minimum of four years or 8,000 hours of supervisory electrical construction experience (design, planning, lay-out and direct supervision) by notarized affidavits from a licensed electrical contractor, electrical or building inspector, or electrical project manager, with corresponding W-2 or 1099 forms; the forms do not require the experience to be in Alabama. Up to 2,000 hours may be substituted with approved education or apprenticeship. The applicant then passes the Alabama Electrical Contractor exam or the NASCLA Electrical Contractors exam via Prov ($165) and applies for the license with forms EC-1 and EC-2 and the $150 license fee. One exception: because the Board 'also accepts the NASCLA Electrical Contractors Exam to qualify for reciprocal licensing', an applicant from any state who already passed the NASCLA electrical exam may instead use the reciprocity route (Business and Law exam, notarized reciprocal application, $315 fee, NASCLA exam waiver form).
The Business and Law exam is required only on the reciprocity route; the examination route pages list only the trade exam. Exam approvals expire one year after approval if the exam has not been passed (303-X-3-.02(7)). An applicant holding an Alabama-registered professional electrical engineer license also qualifies to sit for the exam (303-X-3-.02(11)). Georgia licensees follow this default path: the Board's forms page states it 'no longer shares reciprocity with Georgia' and that outstanding Georgia reciprocal applications no longer qualify; no termination date is published.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 8,000 hours of qualifying work experience.Four years of supervisory electrical construction experience (design, planning, lay-out and direct supervision), or 8,000 hours as a journeyman in charge of jobs; up to 2,000 hours from approved education or apprenticeship (303-X-3-.02).
What you'll do to get licensed in Alabama
- 1Exam fee. Pay the exam fee ($165). Electrical Contractor examination fee (Alabama exam or NASCLA Portable EC exam via Prov), non-refundable.
- 2Trade exam. Pass the destination's trade exam. Alabama Electrical Contractor exam or NASCLA Electrical Contractors exam administered by Prov (2023 NEC; 2026 NEC from January 1, 2027).
- 3License fee. Pay the license or certificate fee ($150). Electrical Contractor license fee (forms EC-1 and EC-2); annual renewal $150.
- 4Other. Notarized Affidavit of Supervisor or Work Experience from each employer with corresponding W-2 or 1099 forms.
- 5Continuing education. Complete continuing education. 14 hours of continuing education every two years to keep the license (303-X-3-.04(5)).
Published fees on this path total $315, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Exam fee · $165
- Trade exam
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Alabama licenses master electricians
Alabama master electrician · “Electrical Contractor (master-electrician equivalent)”
State license plus local requirements
Issued by Alabama Board of Electrical Contractors
Alabama's highest person-held electrical credential is the statewide Electrical Contractor license, which the Board's own page says 'may also be interchanged with Master Electrician'. Under Ala. Code §34-36-7(c) it is issued only to a person (never to a firm), and the licensee then qualifies a business through the EC-2 business information form, so it is treated here as the master level. A new applicant must document 8,000 hours (four years) of experience designing, planning, laying out and directly supervising electrical construction, or 8,000 hours as a journeyman in charge of jobs, and pass the Alabama Electrical Contractor exam or the NASCLA Electrical Contractors exam through Prov ($165); the license fee is $150, renewal is $150 per year, the license is unlimited in voltage and bid amount, and 14 hours of continuing education are required every two years. The Board has electrical contractor reciprocity with Mississippi, Tennessee, North Carolina, South Carolina, Virginia, Ohio, Louisiana and Texas, accepts the NASCLA Electrical Contractors exam as a basis for reciprocal licensing, and ended reciprocity with Georgia. Counties and municipalities may also license electrical contractors for work within their boundaries, but a statewide license is deemed qualifying everywhere in the state.
How local licensing works in Alabama
Ala. Code §34-36-13(a) lets a person engage in electrical contracting under a license 'from the board or from the county or municipality where the electrical contracting work is being performed', and §34-36-13(b)(2) preserves local examinations, while a valid statewide license is deemed qualifying in every county and municipality on proof of the license plus the local permit and business license. The former provisional electrical contractor license, which converted a county or municipal license into a geographically limited state credential, can no longer be issued since May 15, 2024 (§34-36-7(d)); existing holders may only renew ($75). The Board's reciprocity covers state boards only, and no Alabama city or county reciprocity rule was verified from an official page.
Why Indiana has nothing to transfer
Indiana master electrician
Licensed by cities and counties
Indiana has no statewide master electrician or electrical contractor license and no state electrical board; the Indiana Professional Licensing Agency's list of regulated professions contains no electrical trade. The master-level credential exists only at the local level and under varying names: Indianapolis/Marion County licenses Electrical Contractors whose craft license holder has passed the city's exam, Allen County (Fort Wayne) issues an Electrical Supervisors License that it expressly treats as a master electrician license, Evansville and Bloomington license Master Electricians by local examination, and South Bend and Terre Haute license electrical contractors on proof of a passing ICC National Master Electrician (or Experior/master) exam score. An out-of-state master electrician license carries no state-level recognition in Indiana and none of the major jurisdictions publish a formal reciprocity path for other states' licenses; a master must apply in each city or county where they will pull permits, which in practice means holding an ICC national master exam score or passing the local exam, then meeting that jurisdiction's bond and insurance requirements.
How local licensing works in Indiana
How local licensing works. Indiana regulates plumbers at the state level but has never created a state electrician or electrical contractor license. Each city or county building department decides whether and how to license electrical contractors and master-level electricians, and there is no statewide portability rule. Several jurisdictions accept the ICC National Standard Master Electrician exam as the qualifying test, which makes an ICC score the most portable credential inside the state.
Indianapolis / Marion County. The Department of Business and Neighborhood Services issues an Electrical Contractor license to a business that has at least one electrical craft license holder who has passed the required examination (contact the Trade Board & Licensing Coordinator for the exam); a license holder may be connected to only one partnership, LLC or corporation. The packet requires proof of business registration, a certificate of insurance ($500,000 per occurrence bodily injury and $100,000 property damage, or $500,000 combined) naming the Consolidated City of Indianapolis and Marion County as additional insured, workers' compensation coverage or an Indiana exemption certificate (Ohio-based companies need an Indiana Certificate of Compliance), and a $10,000 license or permit surety bond expiring 12/31/2027. 2026 fees: new license holder $377 (applied for January-June 2026), $283 (July-December 2026) or $189 (2027); new business license $247, $185 or $124; business and license-holder renewals $247 each; more than five authorized agents $63 each. Licenses expire December 31 of odd-numbered years.
Fort Wayne / Allen County. The Building Department's Electrical Supervisors License requires four years and 7,000 hours as a journeyman (or eight years and 14,000 hours of documented OJT plus 30 days as a licensed journeyman) and a passing examination; the holder 'shall be considered a master electrician' and may qualify a business for the Electrical Contractors Business Registration ($90; supervisor license $25). Section H of the rules grants licensing reciprocity subject to the trade's reciprocity guidelines and the minimum qualifications, and allows the Building Commissioner to grant reciprocity at his discretion to applicants who present the necessary credentials.
Evansville. The Building Commission licenses Master Electricians (persons, firms or corporations installing or contracting to install electrical wiring and equipment). Applicants submit three notarized letters on letterhead proving at least four years of experience, are approved by the trade board to test, sit the exam through Ivy Tech and must score 75% or higher on each part, then receive a provisional license on paying the $300 fee and providing insurance and a surety bond; the Licensing and Disciplinary Board gives final approval. Renewal is $225 with a $25 late fee after January 31.
South Bend. The Building Department licenses electrical contractors after review of an application showing at least 21 years of age, four years of experience verified by employer letters (or business tax records), and a passing score of at least 70% on the ICC National Master Electrician exam (F16-N) via Pearson Vue or Prometric or a comparable nationally recognized exam approved by the Board of Examiners; a $5,000 surety bond naming the City of South Bend/St. Joseph County, workers' compensation proof, a $50 application review fee and $125 annual registration are required. South Bend issues reciprocal letters ($70) only to municipalities that accept the ICC master exams and cannot guarantee acceptance elsewhere.
Terre Haute. Commercial and residential electrical contractor licenses are issued to businesses; a full-time employee must have passed the Experior Assessment master electrician exam or equivalent for the commercial license (master, journeyman or residential exam for the residential license), proven by a letter from the testing agency. General contractor registration requirements also apply: a $10,000 bond on the city's form and $500,000/$100,000 insurance naming the city; a non-owner master signs a letter accepting responsibility as designated supervisor.
Bloomington. A city ordinance makes it unlawful to engage in electrical contracting without a city license and creates a Board for the Examination and Registration of Electricians that examines and licenses master electricians; current fees were not confirmed from the archived ordinance.
Out-of-state holders. No jurisdiction reviewed publishes reciprocity for another state's master or contractor license. Allen County has a discretionary reciprocity clause; South Bend and Terre Haute accept ICC/Experior national exam scores regardless of where they were earned; Indianapolis and Evansville require their own examinations. Expect to license separately in each jurisdiction and to meet each one's bond and insurance rules.
Common questions
- Do I have to take the Alabama master electrician exam if I'm licensed in Indiana?
- Yes. Alabama requires the trade exam on this path.
- What does it cost to get a Alabama master electrician license from Indiana?
- Published fees on this path total $315, not counting exam vendor fees or bonds.
- Do my Indiana work hours count in Alabama?
- Yes. Documented out-of-state experience counts toward Alabama's eligibility requirements.
- Does it work the other way, from Alabama to Indiana?
- Not necessarily. Reciprocity is directed. Going from Alabama to Indiana, the mechanism is not applicable.
Sources
- Alabama Administrative Code Chapter 303-X-3 - Licensing (certified rules effective February 14, 2026) · Ala. Admin. Code 303-X-3-.02, -.03, -.06, -.10 · Alabama Board of Electrical Contractors · Admin Rule · verified September 15, 2026303-X-3-.02: electrical contractor applicants must document 8,000 hours of design, planning, lay-out and direct supervision of electrical construction (or 8,000 hours as a journeyman in charge of jobs); the license is unlimited in voltage and bid amount; (10) the Board may recognize a license from a reciprocating state with equal or greater standards, the list of approved reciprocal states is kept at the Board office and the Executive Director approves or denies reciprocal applicants. 303-X-3-.03: journeyman applicants must document 8,000 hours; (6) same reciprocity language. 303-X-3-.06(2): an electrical contractor by reciprocity must hold a current and valid license in a qualifying reciprocal state with no previous or pending disciplinary action. 303-X-3-.10 (effective January 17, 2026): EC exam $165, journeyman exam $115, EC license $150, journeyman license $35, renewals $150/$35, Reciprocal Electrical Contractor License $315.
- Form ECE-1 - Electrical Contractor Examination Application · Alabama Board of Electrical Contractors · Form · verified September 15, 2026Requires a minimum of four years or 8,000 hours of supervisory electrical construction experience (designed, planned, laid out and directly supervised electrical construction) documented by notarized affidavits from a licensed electrical contractor, inspector or project manager, with W-2/1099 forms; education substitutes up to 2,000 hours; exam choices are the Alabama Electrical Contractor exam (Prov, $165) or the NASCLA Portable EC exam ($165).
- Alabama Board of Electrical Contractors - Fees · Alabama Board of Electrical Contractors · Agency Page · verified September 15, 2026Fee table: EC exam $165; journeyman exam $115; EC license $150; journeyman license $35; EC renewal $150; journeyman renewal $35; EC late renewal $50 per year up to 5 years; inactive EC certificate $75; inactive journeyman certificate $15; replacement card $25; Reciprocal License Application Fee $315.
- Alabama Board of Electrical Contractors - Forms and Testing Information (How to Get Licensed; Reciprocal Applications) · Alabama Board of Electrical Contractors · Agency Page · verified September 15, 2026Defines the Electrical Contractor (interchangeable with 'Master Electrician') and Journeyman Electrician licenses; exam fees $165 (EC) and $115 (journeyman), license fees $150 (EC) and $35 (journeyman); exams by Prov on the 2023 NEC (2026 NEC from January 1, 2027); NASCLA exams offered. Lists the reciprocal boards: Mississippi, Tennessee, North Carolina, South Carolina, Virginia, Ohio and Louisiana (EC only) and Texas (EC or Journeyman); states the Board no longer shares reciprocity with Georgia; gives the five reciprocity steps (Alabama Business and Law exam, notarized reciprocity application, $315 fee effective February 14, 2026, Verification of License form, foreign-corporation registration) and that the NASCLA Electrical Contractors exam also qualifies for reciprocal licensing.
- Code of Alabama 1975, Title 34, Chapter 36 - Electrical Contractors and Journeyman Electricians · Ala. Code §§ 34-36-3, 34-36-7, 34-36-13 · Alabama Board of Electrical Contractors (compilation of the Code of Alabama) · Statute · verified September 15, 2026§34-36-3 defines Electrical Contractor (a person qualified to plan, lay out and supervise electrical installations with four years as a journeyman in charge of jobs or four years in design and construction) and Journeyman Electrician. §34-36-7(b): the Board may recognize a license issued by any other state with standards equal to or higher than Alabama's and shall actively seek to reciprocate; §34-36-7(c): licenses are issued only to a person, never to a firm; §34-36-7(d): no new provisional (local-license-based) contractor licenses after May 15, 2024. §34-36-13(a): no person may perform work as a master or journeyman electrician without a license from the Board or from the county or municipality where the work is performed; §34-36-13(b)(2): local governments may examine electricians but a holder of a valid statewide Board license is deemed qualified in every county and municipality.
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.