LicensebyState

Kansas to Alabama: master electrician license reciprocity

No credit· Start overVerified September 15, 2026· 5 sources

Kansas does not issue a statewide master electrician license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Examination with documented out-of-state experience (states without an agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A master electrician or electrical contractor from a state outside the Board's reciprocal list has no endorsement path: §34-36-7(b) and rule 303-X-3-.02(10) limit recognition to states on the Board's approved reciprocal list. The applicant instead files the Electrical Contractor Examination Application (ECE-1) and documents a minimum of four years or 8,000 hours of supervisory electrical construction experience (design, planning, lay-out and direct supervision) by notarized affidavits from a licensed electrical contractor, electrical or building inspector, or electrical project manager, with corresponding W-2 or 1099 forms; the forms do not require the experience to be in Alabama. Up to 2,000 hours may be substituted with approved education or apprenticeship. The applicant then passes the Alabama Electrical Contractor exam or the NASCLA Electrical Contractors exam via Prov ($165) and applies for the license with forms EC-1 and EC-2 and the $150 license fee. One exception: because the Board 'also accepts the NASCLA Electrical Contractors Exam to qualify for reciprocal licensing', an applicant from any state who already passed the NASCLA electrical exam may instead use the reciprocity route (Business and Law exam, notarized reciprocal application, $315 fee, NASCLA exam waiver form).

The Business and Law exam is required only on the reciprocity route; the examination route pages list only the trade exam. Exam approvals expire one year after approval if the exam has not been passed (303-X-3-.02(7)). An applicant holding an Alabama-registered professional electrical engineer license also qualifies to sit for the exam (303-X-3-.02(11)). Georgia licensees follow this default path: the Board's forms page states it 'no longer shares reciprocity with Georgia' and that outstanding Georgia reciprocal applications no longer qualify; no termination date is published.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must document at least 8,000 hours of qualifying work experience.Four years of supervisory electrical construction experience (design, planning, lay-out and direct supervision), or 8,000 hours as a journeyman in charge of jobs; up to 2,000 hours from approved education or apprenticeship (303-X-3-.02).

What you'll do to get licensed in Alabama

  1. 1Exam fee. Pay the exam fee ($165). Electrical Contractor examination fee (Alabama exam or NASCLA Portable EC exam via Prov), non-refundable.
  2. 2Trade exam. Pass the destination's trade exam. Alabama Electrical Contractor exam or NASCLA Electrical Contractors exam administered by Prov (2023 NEC; 2026 NEC from January 1, 2027).
  3. 3License fee. Pay the license or certificate fee ($150). Electrical Contractor license fee (forms EC-1 and EC-2); annual renewal $150.
  4. 4Other. Notarized Affidavit of Supervisor or Work Experience from each employer with corresponding W-2 or 1099 forms.
  5. 5Continuing education. Complete continuing education. 14 hours of continuing education every two years to keep the license (303-X-3-.04(5)).

Published fees on this path total $315, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Exam fee · $165
  • Trade exam

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

How Alabama licenses master electricians

Alabama master electrician · “Electrical Contractor (master-electrician equivalent)

State license plus local requirements

Verified September 15, 2026· 5 sources

Issued by Alabama Board of Electrical Contractors

Alabama's highest person-held electrical credential is the statewide Electrical Contractor license, which the Board's own page says 'may also be interchanged with Master Electrician'. Under Ala. Code §34-36-7(c) it is issued only to a person (never to a firm), and the licensee then qualifies a business through the EC-2 business information form, so it is treated here as the master level. A new applicant must document 8,000 hours (four years) of experience designing, planning, laying out and directly supervising electrical construction, or 8,000 hours as a journeyman in charge of jobs, and pass the Alabama Electrical Contractor exam or the NASCLA Electrical Contractors exam through Prov ($165); the license fee is $150, renewal is $150 per year, the license is unlimited in voltage and bid amount, and 14 hours of continuing education are required every two years. The Board has electrical contractor reciprocity with Mississippi, Tennessee, North Carolina, South Carolina, Virginia, Ohio, Louisiana and Texas, accepts the NASCLA Electrical Contractors exam as a basis for reciprocal licensing, and ended reciprocity with Georgia. Counties and municipalities may also license electrical contractors for work within their boundaries, but a statewide license is deemed qualifying everywhere in the state.

How local licensing works in Alabama

Ala. Code §34-36-13(a) lets a person engage in electrical contracting under a license 'from the board or from the county or municipality where the electrical contracting work is being performed', and §34-36-13(b)(2) preserves local examinations, while a valid statewide license is deemed qualifying in every county and municipality on proof of the license plus the local permit and business license. The former provisional electrical contractor license, which converted a county or municipal license into a geographically limited state credential, can no longer be issued since May 15, 2024 (§34-36-7(d)); existing holders may only renew ($75). The Board's reciprocity covers state boards only, and no Alabama city or county reciprocity rule was verified from an official page.

Moving to AlabamaLeaving Alabama

Why Kansas has nothing to transfer

Kansas master electrician

Licensed by cities and counties

Verified September 15, 2026· 10 sources

Kansas does not issue a master electrician license; the master credential exists only at the county and city level under the framework in K.S.A. 12-1525 to 12-1527. State law requires a master certificate of competency to rest on a valid journeyman certificate held for at least two years plus a passing score of 75% on an ICC, IAPMO or Prometric standard master exam, and makes that certificate valid proof of competency in every Kansas jurisdiction that licenses electricians. Sedgwick County/Wichita (MABCD) issues master electrician certificates ($35) to certified journeymen with two more years of field experience who pass ICC 554/KGD/F16/G16/T16; Kansas City, Kansas licenses master electricians after four years of experience including two years of commercial or industrial work; Lawrence certifies masters with four years of field experience or two years as a journeyman ($20); and Johnson County uses the ICC Standard Master Electrician exam (554/KGD) to qualify the individual behind a Class DE electrical contractor license ($325 for a new license). None of these jurisdictions has a reciprocity agreement with another state - MABCD states it does not reciprocate with other jurisdictions - so an out-of-state master's advantage is limited to submitting an already-passed ICC master exam score (Johnson County and MABCD accept the ICC national master exams) and documented experience in place of retesting.

How local licensing works in Kansas

How local licensing works. Kansas has no state master electrician license. K.S.A. 12-1526(f) requires applicants for a master certificate to have held a valid journeyman certificate for at least two years, and 12-1525 designates the ICC, IAPMO and Prometric master exams (75% minimum). A master certificate of competency earned on a standard exam is accepted for licensure in any other Kansas county or city without re-examination; a license based on a local alternative exam is valid only in that jurisdiction unless a reciprocal agreement exists (12-1527).

Sedgwick County and Wichita (MABCD). Master electrician certificate: current electrical journeyman certificate plus two years of field experience as a certified journeyman, and a 75% score on ICC 554, KGD, F16, G16 or T16 Master Electrician. New certificate $35, two-year term, renewal $35 with six trade and six general CEUs. An electrical contractor license additionally needs a qualified person holding the master certificate, $300,000 general liability insurance naming MABCD, and 12 hours of CE per renewal; trade contractor licenses expire December 31 of odd years. MABCD states it does not reciprocate with other jurisdictions or with state testing.

Johnson County. The county licenses electrical contractors (Class DE, electrical services only) rather than individual masters. The company's Qualifying Individual must show a passing score on the ICC Standard Master Electrician exam (554 or KGD, Pearson VUE); the county accepts equivalent ICC, Prometric, ETS-subsidiary and IAPMO exams and may recognize ICC National exams with a verified score of 75% or higher. Fees: $100 application plus $225 per license type ($325 for one new license), $225 renewal, $75 late fee; eight hours of CE per classification per year for the Qualifying Individual.

Kansas City, Kansas (Unified Government). Code sec. 8-158: no one may work as a master electrician without a Unified Government master electrician's license. Applicants must be 21 and document one year of experience planning, laying out and supervising electrical installations plus three additional years under a licensed electrical contractor or master electrician, at least two of them in commercial or industrial work; an approved post-high-school electrical course earns up to two years' credit. Testing is through Prometric via the Building Inspection division; fees and reciprocity are not published.

Lawrence. Master electrician certification requires four years of practical field experience or two years as a journeyman, verified by notarized employer statements, and a 75% score on the K.S.A. standard exam ($50 exam application); license $20, renewal $10, six hours of CE per year. Certificates of competency from other Kansas jurisdictions are accepted.

Out-of-state masters. No interstate reciprocity is published anywhere in Kansas. A master who already passed an ICC master exam elsewhere should present the score (Sedgwick County lists the national ICC 554/F16/G16/T16 exams; Johnson County will consider ICC National scores of 75%+) with experience documentation; otherwise the ICC or Prometric master exam must be taken through a sponsoring Kansas jurisdiction, after which the certificate is portable statewide.

Moving to KansasLeaving Kansas

Common questions

Do I have to take the Alabama master electrician exam if I'm licensed in Kansas?
Yes. Alabama requires the trade exam on this path.
What does it cost to get a Alabama master electrician license from Kansas?
Published fees on this path total $315, not counting exam vendor fees or bonds.
Do my Kansas work hours count in Alabama?
Yes. Documented out-of-state experience counts toward Alabama's eligibility requirements.
Does it work the other way, from Alabama to Kansas?
Not necessarily. Reciprocity is directed. Going from Alabama to Kansas, the mechanism is not applicable.

Sources

  1. Alabama Administrative Code Chapter 303-X-3 - Licensing (certified rules effective February 14, 2026) · Ala. Admin. Code 303-X-3-.02, -.03, -.06, -.10 · Alabama Board of Electrical Contractors · Admin Rule · verified September 15, 2026303-X-3-.02: electrical contractor applicants must document 8,000 hours of design, planning, lay-out and direct supervision of electrical construction (or 8,000 hours as a journeyman in charge of jobs); the license is unlimited in voltage and bid amount; (10) the Board may recognize a license from a reciprocating state with equal or greater standards, the list of approved reciprocal states is kept at the Board office and the Executive Director approves or denies reciprocal applicants. 303-X-3-.03: journeyman applicants must document 8,000 hours; (6) same reciprocity language. 303-X-3-.06(2): an electrical contractor by reciprocity must hold a current and valid license in a qualifying reciprocal state with no previous or pending disciplinary action. 303-X-3-.10 (effective January 17, 2026): EC exam $165, journeyman exam $115, EC license $150, journeyman license $35, renewals $150/$35, Reciprocal Electrical Contractor License $315.
  2. Form ECE-1 - Electrical Contractor Examination Application · Alabama Board of Electrical Contractors · Form · verified September 15, 2026Requires a minimum of four years or 8,000 hours of supervisory electrical construction experience (designed, planned, laid out and directly supervised electrical construction) documented by notarized affidavits from a licensed electrical contractor, inspector or project manager, with W-2/1099 forms; education substitutes up to 2,000 hours; exam choices are the Alabama Electrical Contractor exam (Prov, $165) or the NASCLA Portable EC exam ($165).
  3. Alabama Board of Electrical Contractors - Fees · Alabama Board of Electrical Contractors · Agency Page · verified September 15, 2026Fee table: EC exam $165; journeyman exam $115; EC license $150; journeyman license $35; EC renewal $150; journeyman renewal $35; EC late renewal $50 per year up to 5 years; inactive EC certificate $75; inactive journeyman certificate $15; replacement card $25; Reciprocal License Application Fee $315.
  4. Alabama Board of Electrical Contractors - Forms and Testing Information (How to Get Licensed; Reciprocal Applications) · Alabama Board of Electrical Contractors · Agency Page · verified September 15, 2026Defines the Electrical Contractor (interchangeable with 'Master Electrician') and Journeyman Electrician licenses; exam fees $165 (EC) and $115 (journeyman), license fees $150 (EC) and $35 (journeyman); exams by Prov on the 2023 NEC (2026 NEC from January 1, 2027); NASCLA exams offered. Lists the reciprocal boards: Mississippi, Tennessee, North Carolina, South Carolina, Virginia, Ohio and Louisiana (EC only) and Texas (EC or Journeyman); states the Board no longer shares reciprocity with Georgia; gives the five reciprocity steps (Alabama Business and Law exam, notarized reciprocity application, $315 fee effective February 14, 2026, Verification of License form, foreign-corporation registration) and that the NASCLA Electrical Contractors exam also qualifies for reciprocal licensing.
  5. Code of Alabama 1975, Title 34, Chapter 36 - Electrical Contractors and Journeyman Electricians · Ala. Code §§ 34-36-3, 34-36-7, 34-36-13 · Alabama Board of Electrical Contractors (compilation of the Code of Alabama) · Statute · verified September 15, 2026§34-36-3 defines Electrical Contractor (a person qualified to plan, lay out and supervise electrical installations with four years as a journeyman in charge of jobs or four years in design and construction) and Journeyman Electrician. §34-36-7(b): the Board may recognize a license issued by any other state with standards equal to or higher than Alabama's and shall actively seek to reciprocate; §34-36-7(c): licenses are issued only to a person, never to a firm; §34-36-7(d): no new provisional (local-license-based) contractor licenses after May 15, 2024. §34-36-13(a): no person may perform work as a master or journeyman electrician without a license from the Board or from the county or municipality where the work is performed; §34-36-13(b)(2): local governments may examine electricians but a holder of a valid statewide Board license is deemed qualified in every county and municipality.

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related