LicensebyState

Louisiana to Connecticut: master electrician license reciprocity

No credit· Start overVerified September 15, 2026· 6 sources

Louisiana does not issue a statewide master electrician license, so there is nothing to transfer. Here is Connecticut's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Contractor (E-1) by equivalent out-of-state license (all states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A master electrician or electrical contractor licensed in any other state applies under DCP's 'Electrical Contractor - Equivalent Out of State License' path. DCP reviews a single out-of-state license for equivalency to the E-1: it must have required 720 classroom hours with a curriculum matching Exhibit A, 8,000 apprentice OJT hours and two years (4,000 hours) of licensed OJT, 12,000 hours in total. The applicant submits a copy of the license, an official license verification, the laws and regulations that set the requirements met to obtain it, and the scope of work for that license, with the non-refundable $150 application fee. If approved, the applicant must pass both the E-1 trade exam and the Business and Law exam through PSI ($59 per portion) and then pay the $150 initial license fee; the out-of-state license does not waive either exam because Connecticut has no reciprocal agreements. An applicant whose license is not found equivalent must document the classroom and OJT hours directly under the equivalent experience and training path.

The out-of-state license page does not restate the exam requirement; it follows from the Electrical License page, CGS 20-333 and the PSI bulletin, which states that all contractors must pass a Business and Law examination and a trade examination. CGS 20-333a allows licensure without examination only where the other state reciprocates for Connecticut licensees, and DCP states no such agreements exist. Whether DCP treats an out-of-state 'master' license (rather than a contractor license) as the E-1 equivalent depends on the hour and curriculum comparison; DCP publishes no list of accepted titles.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Your Louisiana license must be active and in good standing.
  • The out-of-state license must be equivalent: it required 720 classroom hours matching Exhibit A, 8,000 apprentice OJT hours and 4,000 licensed OJT hours (12,000 total)Only one out-of-state license is reviewed for equivalency.
  • You must document at least 12,000 hours of qualifying work experience.8,000 hours as an apprentice plus 2 years (4,000 hours) working as a licensed journeyperson.

What you'll do to get licensed in Connecticut

  1. 1Application fee. Pay the application fee ($150). Contractor application fee, non-refundable (CGS 20-333).
  2. 2Other. Copy of the out-of-state license, official license verification, the laws/regulations listing the requirements met to obtain it, and the scope of work for that license.
  3. 3Trade exam. Pass the destination's trade exam. E-1 Unlimited Electrical Contractor trade exam administered by PSI: 100 questions, 4 hours, 70% to pass, open book (2020 or 2023 NEC).
  4. 4Law / code exam. Pass a law, rules, or code exam. Connecticut Business and Law exam (PSI): 50 questions, 2 hours, 70% to pass, based on the NASCLA Contractors Guide to Business, Law and Project Management, Connecticut 6th edition.
  5. 5Exam fee. Pay the exam fee ($59). PSI fee for the trade portion (same fee for retakes).
  6. 6Exam fee. Pay the exam fee ($59). PSI fee for the Business and Law portion (same fee for retakes).
  7. 7License fee. Pay the license or certificate fee ($150). Initial license fee for a contractor's license after passing both exams (CGS 20-335); renews annually for $150.

Published fees on this path total $418, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Law / code exam
  • Exam fee · $59
  • Exam fee · $59

How Connecticut licenses master electricians

Connecticut master electrician · “E-1 Unlimited Electrical Contractor”

Statewide license

Verified September 15, 2026· 5 sources

Issued by Connecticut Department of Consumer Protection, Occupational and Professional Licensing (Electrical Work Examining Board)

Connecticut has no license titled 'master electrician'; the top-tier personal license is the E-1 Unlimited Electrical Contractor, issued by DCP to an individual (DCP licenses individuals, not companies) and permitting all electrical work under CGS 20-330, pulling permits and contracting with the public. A new E-1 applicant needs 720 classroom hours matching DCP's Exhibit A curriculum and 12,000 OJT hours (8,000 as an apprentice plus 4,000 hours, two years, working as a licensed journeyperson), reachable through two years as a Connecticut journeyperson, equivalent experience and training, or an equivalent out-of-state license, and must pass both the PSI E-1 trade exam (100 questions, 4 hours, 70%) and the Business and Law exam (50 questions, 2 hours, 70%). DCP states that Connecticut does not have reciprocal agreements with any other jurisdiction. Fees are a $150 application fee, $59 per exam portion and a $150 initial license fee; licenses expire every September 30 and renew for $150.

Moving to ConnecticutLeaving Connecticut

Compare: getting a Connecticut license from scratch

Why Louisiana has nothing to transfer

Louisiana master electrician

Licensed by cities and counties

Verified September 15, 2026· 13 sources

Issued by Parish and municipal building departments (no state master license); Louisiana State Licensing Board for Contractors licenses contractors only

Louisiana does not issue a statewide master electrician license. The state-level credential for electrical work is the Louisiana State Licensing Board for Contractors (LSLBC) commercial license with the Electrical classification, mandatory for any electrical project of $10,000 or more; it is a contractor license issued to the business (or to a sole proprietor) and qualified by a natural person, the qualifying party, who passed the Electrical trade exam through PSI, so it is treated here as a business license rather than a person-held master credential, even though Texas recognizes the Louisiana statewide license as master-equivalent. Master electrician licenses exist only at the local level: New Orleans issues a Class 'A' Master Electrical License ($125 per year) to an applicant who passed the ICC F49 Electrical Contractor exam or holds the LSLBC statewide license as its qualifying party, carries $500,000 of general liability insurance, and is the only Class 'A' holder for the company; Jefferson Parish issues a parish trade contractor license ($200) built on the state license. For the state contractor license the LSLBC waives the trade exam for any applicant who passed a comparable classification exam in any other state, with no partner-state list since October 23, 2024, but the Business and Law course/exam, the financial statement and the other licensing requirements are never waived. No parish or city page reviewed publishes reciprocity for out-of-state master licenses.

How local licensing works in Louisiana

State contractor license (not a master license). Under La. R.S. 37:2150.1 an electrical contractor is anyone contracting for electrical work of $10,000 or more, and the LSLBC issues the commercial license to that person or business with an Electrical classification qualified by a designated qualifying party. Applicants file the online application with a financial statement (required of all applicants), Secretary of State registration for any business entity including out-of-state companies, the online Business and Law course/exam, and the PSI trade exam for the classification; statutory fee caps are $50 per examination, $100 license and $100 renewal, plus a surcharge of up to $400 that the board may assess on a contractor not domiciled in Louisiana. Reciprocity for the state license: R.S. 37:2153(F)(5) directs the board to waive the trade portion of the exam for an applicant licensed in a comparable classification in another state on written certification that the applicant passed that classification's exam and is in good standing, and the Executive Director's October 23, 2024 letter extends this to any state: a classification exam passed in any other state 'with no waivers, exemptions, or grandfathering in effect' is accepted for the equivalent Louisiana classification, and all previous state-to-state agreements were declared null and void. The applicant has the origin board complete the Reciprocity Request form (license status, disciplinary history, and the name, exam developer, date and score of each person who passed the trade exam) and uploads it with the application; the exam/administrative fee is still charged, and the business law requirement 'shall not be waived'.

New Orleans. The Class 'A' Master Electrical License doubles as the city's electrical contractor license: the applicant submits a passing ICC Official Results Report for exam F49 Electrical Contractor, or a copy of the LSLBC statewide license with the qualifying party letter, plus certificates of general liability insurance of at least $500,000 and workers' compensation naming the City as certificate holder; the license costs $125 per year active or $30 inactive, with a $10 per month delinquent fee, and only one Class 'A' holder is allowed per company. The city page states no experience requirement and no reciprocity.

Jefferson Parish. A parish trade contractor license ($200 new) is issued to a license holder/qualifying party and lists the state license, occupational license, sales tax registration, liability insurance and workers' compensation on its checklist; the parish also administers its own electrical exam.

Shreveport. Requires city contractor registration for anyone performing electrical work and the state license for work over $10,000; master testing is referred to the ICC or the LSLBC.

Baton Rouge and Lafayette. No official page describing a master electrician license was located for East Baton Rouge Parish or Lafayette Consolidated Government.

Out-of-state holders. A master electrician from another state who wants to contract in Louisiana applies for the LSLBC commercial license and, if the master license was earned by a trade exam, requests the trade-exam waiver by reciprocity; the Business and Law course and financial statement are still required. City licenses such as New Orleans Class 'A' can then be obtained on the state license or the ICC F49 exam.

Moving to LouisianaLeaving Louisiana

Common questions

Do I have to take the Connecticut master electrician exam if I'm licensed in Louisiana?
Yes. Connecticut requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Connecticut master electrician license from Louisiana?
Published fees on this path total $418, not counting exam vendor fees or bonds.
Do my Louisiana work hours count in Connecticut?
Yes. Documented out-of-state experience counts toward Connecticut's eligibility requirements.
Does it work the other way, from Connecticut to Louisiana?
Not necessarily. Reciprocity is directed. Going from Connecticut to Louisiana, the mechanism is not applicable.

Sources

  1. Connecticut General Statutes Chapter 393 - Occupational Licensing (Electrical, Plumbing and Piping, Heating, Cooling...) · CGS §§ 20-330, 20-333, 20-333a, 20-334a, 20-335 · Connecticut General Assembly · Statute · verified September 23, 2026
  2. Connecticut DCP - Electrical Contractor: Equivalent Experience and Training · Connecticut Department of Consumer Protection · Agency Page · verified September 23, 2026
  3. Connecticut DCP - Electrical Contractor: Equivalent Out of State License · Connecticut Department of Consumer Protection · Agency Page · verified September 15, 2026
  4. Connecticut DCP - Electrical License (application paths, fees, renewal) · Connecticut Department of Consumer Protection · Agency Page · verified September 23, 2026
  5. Connecticut DCP - Electrical License Types and Scope of Work · Connecticut Department of Consumer Protection · Agency Page · verified September 15, 2026
  6. Connecticut DCP Occupational Licensing - Electrical Trades Candidate Information Bulletin (PSI, updated 2/4/2026) · Connecticut Department of Consumer Protection / PSI Services LLC · Form · verified September 23, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related