LicensebyState

New York to Florida: master electrician license reciprocity

No credit· Start overVerified September 15, 2026· 10 sources

New York does not issue a statewide master electrician license, so there is nothing to transfer. Here is Florida's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Certification by endorsement (all other states) or by examination

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A contractor from a state whose exam is not on the ECLB Endorsement List applies on Form ECLB 2 ($492). The applicant must have obtained the origin license by examination and must meet Florida's own experience requirement (3 years of management experience within the last 6, 4 years as a foreman/supervisor/contractor within the last 8, 6 years of training/technical education/supervisory experience within the last 12, 3 years as an electrical professional engineer, or a 6-year combination, with at least 40% of the work on 3-phase services), documented with W-2/1099s, job lists and three verification letters. DBPR then sends an Examination Evaluation Questionnaire to the home-state testing authority; if the Board finds the exam substantially equivalent the Florida exam is waived, otherwise the applicant must pass the Florida technical/safety and business exams through Pearson VUE (exam application $263.25, computer-based exam $123.75). Separately, a contractor who has held a valid electrical contracting license in another state for at least 10 years may apply on Form ECLB 14 ($492) while that license is active or within 2 years after, with no exam and no experience documentation, after completing a 2-hour Florida Building Code course. All routes require personal and business credit reports, a financial statement showing $10,000 net worth, and liability and workers' compensation insurance for an active license.

Exams are waived only when the origin exam is on the Endorsement List or is later found equivalent through the questionnaire, or under the 10-year provision of s. 489.511(5)(c). Exams administered by Experior/Thomson Prometric cannot be compared. The typical timeline is an estimate; DBPR does not publish processing times. Rule 61G6-5.009 (Endorsement) was repealed in 2011, so the statute and the forms are the operative sources. The DBPR page does not state the liability insurance amounts.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 90 days

What you must already have

  • Your New York license must have been obtained by examination, not by reciprocity or grandfathering.
  • Your New York license must be active and in good standing.
  • Experience under s. 489.511(1)(b): 3 years management (within 6), or 4 years foreman/supervisor/contractor (within 8), or 6 years training/technical education/supervisory experience (within 12), or 3 years as an electrical PE, or a 6-year combination; at least 40% on 3-phase services for the EC category
  • You must have held your New York license for at least 10 years.Alternative 10-year provision only: license held at least 10 years and active within the last 2 years; waives exams and experience documentation

What you'll do to get licensed in Florida

  1. 1Application fee. Pay the application fee ($492). Endorsement application fee, Form ECLB 2 (exam-equivalence route) or Form ECLB 14 (10-year route); active or inactive status.
  2. 2Application fee. Pay the application fee ($263.25). Certified examination application fee, if the origin exam is not recognized and the applicant instead applies by examination.
  3. 3Trade exam. Pass the destination's trade exam. Florida Certified Electrical Contractor technical/safety examination (Pearson VUE), required unless the origin exam is on the Endorsement List or the 10-year provision applies.
  4. 4Law / code exam. Pass a law, rules, or code exam. Florida business examination (Pearson VUE), required unless the origin business exam is recognized or the 10-year provision applies.
  5. 5Exam fee. Pay the exam fee ($123.75). Certified computer-based exam fee paid to the vendor; retake application $67.25.
  6. 6License fee. Pay the license or certificate fee ($296). Initial certified license fee (active), as listed in DBPR's fee table.
  7. 7Continuing education. Complete continuing education (if applicable). 2-hour Florida Building Code course, required only under the 10-year endorsement provision.
  8. 8Other. Personal credit report and, for an active license, business credit report from a nationally recognized agency with a public-records statement, dated within 12 months.
  9. 9Other. Financial statement prepared within 12 months showing net worth of at least $10,000 for a Certified Electrical Contractor.
  10. 10Insurance. Carry the required insurance. Public liability insurance and workers' compensation coverage (or exemption) for an active license, as required on the application.

Published fees on this path total $1,175, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Law / code exam
  • Exam fee · $123.75

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

How Florida licenses master electricians

Florida master electrician · “Certified Electrical Contractor (EC)”

State license plus local requirements

Verified September 15, 2026· 8 sources

Issued by Florida Electrical Contractors' Licensing Board (Department of Business and Professional Regulation)

Florida has no license called 'master electrician'. The highest person-held electrical credential is the certificate of competency as a Certified Electrical Contractor (license prefix EC), issued by the Electrical Contractors' Licensing Board within DBPR to an individual who meets the experience requirements of s. 489.511(1)(b), F.S. (for example 4 years as a foreman, supervisor or contractor, with at least 40% of the work on 3-phase services) and passes the Pearson VUE technical/safety and business examinations; the certificate holder then qualifies a business, but the certificate itself belongs to the person and is valid statewide. Alongside the state certificate, counties and municipalities issue their own master electrician or electrical contractor certificates of competency (Miami-Dade's Construction Trades Qualifying Board and Broward's Central Examining Boards, for example); their holders register with DBPR as Registered Electrical Contractors (ER) and may work only in the jurisdictions that issued the local card, which is why this level is marked Hybrid. Florida has no reciprocity agreement with any state. Out-of-state contractors are handled by endorsement under s. 489.511(5): the Board waives the Florida exam(s) only for exams it has found substantially equivalent (currently full recognition for California C-10, Georgia Class II with Low Voltage Unlimited, and North Carolina Unlimited; partial recognition for several others), or waives everything for a contractor licensed in another state for at least 10 years. Everyone else must pass the Florida exams. Certified licenses cost $296 to issue and renew, expire August 31 of even years, and require 11 hours of continuing education per biennium.

How local licensing works in Florida

Local contractor cards and state registration. Under s. 489.505, a Registered Electrical Contractor is one who registered with DBPR after 'fulfilling the competency requirements in the jurisdiction for which the registration is issued'; DBPR's FAQ explains that registered licensees can work only in the counties or municipalities where they hold the local license, while certified licensees can work anywhere in Florida. Initial registration costs $151 (active) plus $25 for each additional county. Miami-Dade's Construction Trades Qualifying Board and Broward County's Central Examining Boards examine and certify master electricians and electrical contractors locally (Broward: trade and Business & Law exams, 75% passing, $450 contractor application from January 1, 2025); Miami-Dade reciprocates its local cards only with Broward and Palm Beach counties. None of the county pages reviewed describes accepting an out-of-state master electrician license toward a local contractor card.

Moving to FloridaLeaving Florida

Why New York has nothing to transfer

New York master electrician

Licensed by cities and counties

Verified September 15, 2026· 18 sources

New York issues no statewide master electrician license; the Department of State's Division of Licensing Services licenses no electricians, and master electrician licenses are issued by city and county examining boards under local ordinances. The largest is New York City's Department of Buildings Master Electrician license (with a companion Special Electrician license for in-house work), which requires seven years of experience within the last ten working with tools under a licensed master or special electrician in the United States, at least two of them in New York City, a $585 written and $530 practical exam, a background investigation, and a New York City business with general liability, workers' compensation and disability insurance; the license costs $310 and is renewed yearly for $60. Buffalo requires 11 years (22,000 hours) of experience and a 75 percent ICC G-16 score; Rochester requires four years (6,000 hours of three-phase work) and an ICC-based exam; Westchester County licenses master and special electricians by examination ($500 license) and its license is what Yonkers permits require; Suffolk County licenses master and restricted electricians; Syracuse and Albany run their own boards. None of these jurisdictions publishes a reciprocity or endorsement path for a master license from another state, although Westchester's fee schedule lists a 'Reciprocal Electrician' license category. A master electrician arriving from another state must qualify with each local board where they intend to work, and in New York City must first accumulate two years of supervised experience inside the city.

How local licensing works in New York

How local licensing works. New York has no state electrical board. Licensing authority rests with individual cities and counties, each with its own examining board, ordinance, exam and fee schedule; a license is valid only in the issuing jurisdiction.

New York City. The Department of Buildings issues the Master Electrician license (independent contracting anywhere in the city) and the Special Electrician license (work as an employee in or on specific buildings). Qualifications (NYC Admin. Code 28-430.3; 1 RCNY 104-01): age 18, read and write English, fitness and good moral character, and one of: seven years within the last ten working with tools on wiring and appliances for light, heat and power under the direct and continuing supervision of a licensed master or special electrician in the United States, at least two years of it in NYC; a bachelor's degree in electrical engineering or engineering technology plus three years within five (two in NYC); a New York State DOL-registered apprenticeship plus five years within ten (two in NYC); or electrical-inspection employment credited at 50 percent up to 2.5 years. Candidates pay $585 for the closed-book written exam on the 2025 NYC Electrical Code (70 percent to pass) and $530 for the practical, which must be passed within 24 months of the written result; the background application (experience verification signed by supervisors, Social Security earnings history, physical exam) is filed through DOB NOW within one year. License fee $310, seal $50, annual renewal $60 with continuing education, late renewal $310. The licensee must be an officer, partner or sole proprietor of a business with a NYC location carrying general liability, workers' compensation and disability insurance. The exam can be waived only for city-agency applicants (28-430.6); no out-of-state waiver exists, and the two-years-in-NYC rule means an out-of-state master cannot qualify immediately.

Buffalo. The Electrical Examining Board's Master Electrician License requires 11 years (22,000 hours) of experience in electrical construction within the last 11 years, structured as four years (8,000 hours) as an apprentice plus seven years (14,000 hours) as a journeyman working for a licensed master, documented by notarized employer and master electrician affidavits; a passing (75 percent or higher) ICC G-16 Master Electrician exam taken within one year; a $100 application fee; and general liability and workers' compensation certificates before issuance. The master electrician affidavit asks in which city the supervising master is licensed, so experience under masters licensed elsewhere is accepted as documentation.

Rochester. The Electrical Examining Board issues a Master (three-phase) license requiring four years of applicable experience, interpreted as at least 6,000 hours of three-phase experience within the past ten years (at least half in the field with tools; up to 3,000 hours may be course work, estimating, design, supervision or single-phase work), and an ICC-based exam with a 70 percent passing grade. Applications are filed online; the Board's rules contain no reciprocity clause.

Westchester County and Yonkers. The Department of Consumer Protection's Electrical Board licenses Master and Special Electricians by examination: exam application $50, master license $500 with $500 annual renewal, special electrician $350. The fee schedule also lists a 'Master and Reciprocal Electrician' license at the same $500, but the conditions for a reciprocal license are not published on the pages that could be opened. Yonkers does not license electricians; its electrical permits are issued to master electricians licensed by Westchester County.

Suffolk County. The Department of Consumer Affairs issues Master Electrician and Restricted Electrical licenses (codes ME and RE). Experience, exam and fee details are in the county code and were not available on the pages that could be opened.

Syracuse and Albany. Syracuse licenses electricians through its Division of Code Enforcement (2026 applications were due June 26 with in-person consideration July 28). Albany's Electrical Examining Board, under General Code Chapter 171, Article III, examines every applicant and includes master electricians licensed by the city for at least five years. Neither city publishes reciprocity rules on the pages reviewed.

Nassau County. The county FAQ treats electricians as a trade licensed under a 'standard of competency', but no Nassau page describing the master electrician license, its requirements or fees could be opened, so Nassau's rules are unverified here.

Out-of-state holders. No New York jurisdiction reviewed publishes an agreement with another state. The practical route is to meet each local board's experience threshold (documented under licensed masters, wherever they were licensed, where the board allows), pass that board's exam, which in Buffalo, Rochester and several other boards is an ICC exam that may already have been taken elsewhere, and pay the local fees; in New York City the two years of supervised experience inside the city must be earned first.

Moving to New YorkLeaving New York

Common questions

Do I have to take the Florida master electrician exam if I'm licensed in New York?
Yes. Florida requires the trade exam on this path, plus a law or code exam.
How long do I need to have held my New York license?
At least 10 years before applying.
What does it cost to get a Florida master electrician license from New York?
Published fees on this path total $1,175, not counting exam vendor fees or bonds.
Do my New York work hours count in Florida?
Yes. Documented out-of-state experience counts toward Florida's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 90 days.
Does it work the other way, from Florida to New York?
Not necessarily. Reciprocity is directed. Going from Florida to New York, the mechanism is not applicable.

Sources

  1. Broward County Building Code Division - Contractor Licensing packet (journeyman and mechanical contractor certificate of competency instructions) · Broward County Code of Ordinances, Chapter 9 - Contractors · Broward County Public Works and Environmental Services, Building Code Division · Form · verified September 15, 2026Text extracted from the PDF. 'Mechanical Journeyman: must have at least three years of experience in the mechanical field (includes mechanical, insulation or sheet metal)', proven by a notarized affidavit from the licensed employer and the last 3 years of W-2s; journeyman certifications do not require the Business & Law exam; the exam (GITS or ProV) needs 75% for the Mechanical exam; processing fee 'Mechanical $225'; the application offers 'New License' or 'License by Reciprocity' with Mechanical Journeyman, Insulation Journeyman and Sheet Metal Journeyman classifications. Fee notice effective January 1, 2025: contractor application or renewal $450, journeyman application $225, journeyman renewal $120, letter of reciprocity $50. Mechanical contractor categories (Mechanical Contractor, Class A Air Conditioning, Class B Air Conditioning 'Limited to 25 tons', Sheet Metal) require 4 years of practical experience and trade plus Business & Law exams.
  2. DBPR - Electrical Contractors FAQs · Florida Department of Business and Professional Regulation · Faq · verified September 15, 2026States that Florida has no reciprocity agreements but offers endorsement (10-year license, or a substantially similar exam); that 'The Department of Business and Professional Regulation does not license or regulate the journeyman's license. You must contact the local county licensing office'; explains certified vs registered contractors; and publishes the fee list: Certified Examination Application $263.25, Certified Computer Based Exam $123.75, Retake Examination Application $67.25, Initial Certified License (active) $296.00, Initial Registered License (active) $151.00, Endorsement Application $492.00.
  3. DBPR - Electrical Contractors' Licensing Board (ECLB) home page · Florida Department of Business and Professional Regulation · Agency Page · verified September 15, 2026Lists the certified (statewide) license types EC/EF/EG/ES and the registered (county-limited) types ER/EY/EZ/ET/EJ, the application types (Examination, Endorsement, 10-Year Endorsement, etc.), Pearson VUE as the exam vendor, and renewal fees ($296 certified, $121 registered); licenses expire August 31 of even years. The page contains no journeyman license.
  4. Form DBPR ECLB 14 - Certified Contractor Application for Endorsement, 10 year Provision (Eff. July 2021) · Fla. Stat. § 489.511(5)(c); Rule 61-35.012, F.A.C. · Florida Department of Business and Professional Regulation · Form · verified September 15, 2026$492 fee. Requires verification of having held a similar license in another state or territory for at least 10 years, active within the last 2 years; proof of a 2-hour Florida Building Code course; personal and business credit reports; financial statement with $10,000 net worth for Certified Electrical Contractors; liability and workers' compensation insurance. No examination and no experience documentation.
  5. Form DBPR ECLB 2 - Application for Certification by Endorsement (Eff. July 2021) · Fla. Stat. § 489.511(5)(a); Rule 61-35.012, F.A.C. · Florida Department of Business and Professional Regulation · Form · verified September 15, 2026$492 fee (active or inactive). Applicant must have obtained the origin license by examination; for states not on the Endorsement List the Bureau of Education and Testing sends an Examination Evaluation Questionnaire to the home-state testing authority (exams given by Experior/Thomson Prometric cannot be compared). Experience options: 3 years management within 6, 4 years foreman/supervisor/contractor within 8, 6 years training/technical education/supervisory experience within 12, 3 years as an electrical PE within 12, or a 6-year combination; EC applicants need at least 40% of that work on 3-phase services. Requires W-2/1099s, three experience letters, personal and business credit reports with public-records statement, Verification of Licensure in Good Standing from the origin board, financial statement showing $10,000 net worth for EC, and liability and workers' compensation insurance for active status.
  6. ECLB Exam Endorsement/Reciprocity List · Fla. Stat. § 489.511(5)(a) · Florida Electrical Contractors' Licensing Board · Agency Page · verified September 15, 2026Opens with 'At this time the Electrical Contractors' Licensing Board does not have reciprocal licensing agreements with any other state.' Then lists the exams found substantially equivalent: California C-10 (= FL Unlimited EC, March 2001), Colorado Master Electrical technical exam (technical only, Nov 2019), Georgia Class II Unrestricted with Georgia Low Voltage Unlimited (= FL Unlimited EC, March 1998) and Georgia Class I (= FL Residential Specialty, March 2010), NASCLA Residential Electrical (technical only, May 2020), Nevada Management Survey (business only, April 2020), North Carolina Unlimited (= FL Unlimited EC, March 1998), Ohio Electrical Contractor (NOT substantially similar, April 2024), Oklahoma Electrical Business exam (business only, April 2020), South Carolina Electrical Business Management & Law exam (business only, April 2020), Tennessee CE-A High Voltage exam (business only, October 2025), Texas Master Electrical exam (technical only, December 2019). The document itself cites the endorsement statute as 489.511(6)(a); the current statute numbers it (5)(a).
  7. Miami-Dade County - Contractors & Building Trades (Construction Trades Qualifying Board) · Miami-Dade County Department of Regulatory and Economic Resources · Agency Page · verified September 15, 2026Journeyman certificate of competency: three years of proven field experience (up to one-half education equivalent) documented with employer letters and W-2s, an open-book exam 'with a grade of 75 percent or above', fee $240. 'Miami-Dade County only reciprocates with Broward and Palm Beach County in specific trade categories'; a reciprocating journeyman must have scored 75% or higher.
  8. Florida Statutes s. 489.505 - Definitions (Part II, Electrical and Alarm System Contracting) · Fla. Stat. § 489.505 · Florida Legislature · Statute · verified September 15, 2026Defines 'certified electrical contractor' as one holding a certificate of competency issued by the department, 'registered electrical contractor' as one who registered with the department after fulfilling the competency requirements of a local jurisdiction, and 'electrical contractor'. The section does not define 'journeyman'.
  9. Florida Statutes s. 489.511 - Certification; application; examinations; endorsement · Fla. Stat. § 489.511(1)(b), (5) · Florida Legislature · Statute · verified September 15, 2026(1)(b) sets the experience/education options for certification; (5) requires the Board to certify by endorsement an individual who (a) meets the certification requirements and passed a substantially equivalent national, regional, state or territorial exam, (b) holds a valid license from another state whose issuance criteria were substantially equivalent, or (c) has held a valid current license in another state for at least 10 years and applies while it is active or within 2 years after (2-hour Florida Building Code course required). The history line ends with ch. 2020-160; which chapter law added the 10-year provision was not confirmed from this page. Section 489.517 covers renewal and continuing education (11 hours per biennium), not endorsement.
  10. Florida Statutes s. 489.517 - Renewal of certificate or registration; continuing education · Fla. Stat. § 489.517 · Florida Legislature · Statute · verified September 15, 2026Renewal and continuing-education section only: each electrical contractor certificateholder or registrant must complete at least 11 classroom hours of continuing education per biennium (technical, workers' compensation, workplace safety and business practices). It contains no endorsement or reciprocity provision; endorsement is in s. 489.511(5).

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related