LicensebyState

Pennsylvania to Alabama: master electrician license reciprocity

No credit· Start overVerified September 15, 2026· 5 sources

Pennsylvania does not issue a statewide master electrician license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Examination with documented out-of-state experience (states without an agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A master electrician or electrical contractor from a state outside the Board's reciprocal list has no endorsement path: §34-36-7(b) and rule 303-X-3-.02(10) limit recognition to states on the Board's approved reciprocal list. The applicant instead files the Electrical Contractor Examination Application (ECE-1) and documents a minimum of four years or 8,000 hours of supervisory electrical construction experience (design, planning, lay-out and direct supervision) by notarized affidavits from a licensed electrical contractor, electrical or building inspector, or electrical project manager, with corresponding W-2 or 1099 forms; the forms do not require the experience to be in Alabama. Up to 2,000 hours may be substituted with approved education or apprenticeship. The applicant then passes the Alabama Electrical Contractor exam or the NASCLA Electrical Contractors exam via Prov ($165) and applies for the license with forms EC-1 and EC-2 and the $150 license fee. One exception: because the Board 'also accepts the NASCLA Electrical Contractors Exam to qualify for reciprocal licensing', an applicant from any state who already passed the NASCLA electrical exam may instead use the reciprocity route (Business and Law exam, notarized reciprocal application, $315 fee, NASCLA exam waiver form).

The Business and Law exam is required only on the reciprocity route; the examination route pages list only the trade exam. Exam approvals expire one year after approval if the exam has not been passed (303-X-3-.02(7)). An applicant holding an Alabama-registered professional electrical engineer license also qualifies to sit for the exam (303-X-3-.02(11)). Georgia licensees follow this default path: the Board's forms page states it 'no longer shares reciprocity with Georgia' and that outstanding Georgia reciprocal applications no longer qualify; no termination date is published.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must document at least 8,000 hours of qualifying work experience.Four years of supervisory electrical construction experience (design, planning, lay-out and direct supervision), or 8,000 hours as a journeyman in charge of jobs; up to 2,000 hours from approved education or apprenticeship (303-X-3-.02).

What you'll do to get licensed in Alabama

  1. 1Exam fee. Pay the exam fee ($165). Electrical Contractor examination fee (Alabama exam or NASCLA Portable EC exam via Prov), non-refundable.
  2. 2Trade exam. Pass the destination's trade exam. Alabama Electrical Contractor exam or NASCLA Electrical Contractors exam administered by Prov (2023 NEC; 2026 NEC from January 1, 2027).
  3. 3License fee. Pay the license or certificate fee ($150). Electrical Contractor license fee (forms EC-1 and EC-2); annual renewal $150.
  4. 4Other. Notarized Affidavit of Supervisor or Work Experience from each employer with corresponding W-2 or 1099 forms.
  5. 5Continuing education. Complete continuing education. 14 hours of continuing education every two years to keep the license (303-X-3-.04(5)).

Published fees on this path total $315, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Exam fee · $165
  • Trade exam

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

How Alabama licenses master electricians

Alabama master electrician · “Electrical Contractor (master-electrician equivalent)

State license plus local requirements

Verified September 15, 2026· 5 sources

Issued by Alabama Board of Electrical Contractors

Alabama's highest person-held electrical credential is the statewide Electrical Contractor license, which the Board's own page says 'may also be interchanged with Master Electrician'. Under Ala. Code §34-36-7(c) it is issued only to a person (never to a firm), and the licensee then qualifies a business through the EC-2 business information form, so it is treated here as the master level. A new applicant must document 8,000 hours (four years) of experience designing, planning, laying out and directly supervising electrical construction, or 8,000 hours as a journeyman in charge of jobs, and pass the Alabama Electrical Contractor exam or the NASCLA Electrical Contractors exam through Prov ($165); the license fee is $150, renewal is $150 per year, the license is unlimited in voltage and bid amount, and 14 hours of continuing education are required every two years. The Board has electrical contractor reciprocity with Mississippi, Tennessee, North Carolina, South Carolina, Virginia, Ohio, Louisiana and Texas, accepts the NASCLA Electrical Contractors exam as a basis for reciprocal licensing, and ended reciprocity with Georgia. Counties and municipalities may also license electrical contractors for work within their boundaries, but a statewide license is deemed qualifying everywhere in the state.

How local licensing works in Alabama

Ala. Code §34-36-13(a) lets a person engage in electrical contracting under a license 'from the board or from the county or municipality where the electrical contracting work is being performed', and §34-36-13(b)(2) preserves local examinations, while a valid statewide license is deemed qualifying in every county and municipality on proof of the license plus the local permit and business license. The former provisional electrical contractor license, which converted a county or municipal license into a geographically limited state credential, can no longer be issued since May 15, 2024 (§34-36-7(d)); existing holders may only renew ($75). The Board's reciprocity covers state boards only, and no Alabama city or county reciprocity rule was verified from an official page.

Moving to AlabamaLeaving Alabama

Why Pennsylvania has nothing to transfer

Pennsylvania master electrician

Licensed by cities and counties

Verified September 15, 2026· 14 sources

Pennsylvania issues no statewide master electrician or electrical contractor license; none of the Department of State's licensing boards covers the trade, so the master-level credential exists only at the city level under names that vary: Philadelphia's Electrical Contractor License (four years with a licensed contractor, the ICC-administered Philadelphia Electrical Contractor exam, eight hours of NFPA 70 coursework, insurance, $60 application, $262 license and $202 annual renewal), Pittsburgh's Electrical Trade License (six years of combined experience and education, an ICC National Standard Master Electrician exam or the city exam, $1M/$2M liability insurance, $90 per year with eight hours of CE), and Master Electrician licenses in Allentown (four years, ICC G16, $50 application), Harrisburg (six years, ICC master exam, $125), Reading (two years as a journeyman, ICC G16Y, $90) and Scranton (four years plus ICC master exam, $250), with Erie licensing electrical contractors through its Trades Licensing Board. Because nearly every city relies on the ICC National Standard Master Electrician exam, a passing ICC score earned in another state is the most portable credential, and Pittsburgh's rules expressly allow the License Officer to accept equivalent out-of-state certification tests. Formal reciprocity is limited to Harrisburg (Maryland, Delaware and several Pennsylvania cities) and Reading (a published list that includes Delaware, Maryland, Michigan, New Jersey, South Carolina, Virginia and West Virginia); an out-of-state master must otherwise apply to each city separately, document local experience thresholds and pay each city's fees.

How local licensing works in Pennsylvania

How local licensing works. Pennsylvania has no state electrical board. Each city that licenses electricians does so under its own ordinance through a local board, and a license is valid only in the issuing city unless that city's rules recognize another jurisdiction. Nearly all cities use ICC exams, and several accept any ICC master exam regardless of code year.

Philadelphia. The Department of Licenses and Inspections issues the Electrical Contractor License (Philadelphia Code 9-1006), the city's only master-level electrician credential; it is issued to the individual, who must also hold a Commercial Activity License. Requirements: a minimum of four years of employment doing electrical work for a company licensed through a local or state jurisdiction (two years of electrical education equals one year of experience, up to two years), proven by tax records from a licensed contractor or proof of licensure through a local or state jurisdiction subject to L&I approval; a passing Philadelphia Electrical Contractor Examination administered by ICC referencing the current Philadelphia Code (or an application within 12 months of passing); eight hours of NFPA 70 coursework approved by the PA Department of Labor and Industry within the preceding 12 months; general liability $500,000 per occurrence, auto $300,000 and workers' compensation $100,000/$100,000/$500,000 naming the city as certificate holder. Fees: $60 non-refundable application, $262 license, $202 annual renewal with a 1.5 percent monthly surcharge after 60 days. Out-of-state licensure can serve as proof of experience but does not waive the Philadelphia exam.

Pittsburgh. The Department of Permits, Licenses and Inspections issues the Electrical Trade License to individuals performing work that requires an electrical permit (PLI Rules VI.6; PCC 747). Applicants show a passing City-proctored Master Electrical exam or an ICC Standard Master Electrician exam for any code year (T16, G16, F16 or older) and six years of combined experience and education evaluated by the License Officer, with employer or licensed-electrician statements; insurance is $1,000,000 per occurrence / $2,000,000 aggregate general liability plus workers' compensation or a no-employee affidavit. The license costs $90 (2025 fee schedule), expires 365 days from issue and renews with eight hours of continuing education. PLI Rule VI.1(E)(d) states that equivalent certification testing programs from other states are accepted upon the License Officer's determination of equivalence.

Allentown. The Electricians' Examining Board issues a Master license on four years of practical experience and the ICC National Standard Master exam (G16); applicants must be over 21 with a high school diploma or GED, pay a $50 non-refundable application fee, obtain Board approval before scheduling the exam, and pay an annual license fee set in the Business Regulation and Tax Code. No reciprocity provision is published.

Harrisburg. The Bureau of Codes issues a Master Electrician license ($125) on six years of practical experience or four years of technical school plus four years, with a passing ICC Master, National Standard Master or Pennsylvania (Philadelphia) Standard Master exam, insurance of $1,000,000 property damage and $300,000 bodily injury per occurrence, and a Mercantile Tax License. Documentation may be by test results or by reciprocity from Allentown, Bethlehem, Lancaster, Reading, Philadelphia, Maryland or Delaware (others considered case by case); a letter of good standing is required from any other Pennsylvania municipality that licenses the applicant.

Reading. The Electrical Board issues a Master Electrician license ($90 annual) to holders of a Reading or reciprocated journeyman license for two years who pass the ICC G16Y master exam. A reciprocal master license ($190 including a one-time reciprocity fee) recognizes licenses from jurisdictions of at least third-class-city standing with an equivalent board and standards; the June 2023 list names Bethlehem, Easton, Erie, Harrisburg, Philadelphia and Scranton, Springfield MO, Sullivan County NY, and the states of Delaware, Maryland (master), Michigan, New Jersey, South Carolina, Virginia and West Virginia. Reciprocal licenses become permanent Reading licenses.

Scranton. Licensing, Inspections and Permits issues a Master Electrical contractor license ($250, calendar year) on four years under a licensed contractor (W-2s or 1099s), a passing ICC/UCC Master Electrical exam, general liability of $500,000 per person / $1,000,000 per occurrence and a Single Tax Office registration; an alternative route uses eight years of experience plus notarized referral letters in place of the exam. The form asks for copies of licenses held in other municipalities but states no reciprocity rule.

Erie. All electrical work must be done by an electrical contractor licensed by the City of Erie and only master license holders may obtain permits; the Trades Licensing Board reviews applications under Article 333 of the Codified Ordinances (not openable), which per the Board page also provides 90-day temporary apprentice and journeyman licenses.

Out-of-state holders. Apart from Harrisburg's and Reading's lists there is no reciprocity. The practical path is to present an ICC National Standard Master Electrician exam result (accepted by Pittsburgh for any code year and by Harrisburg, Allentown, Reading and Scranton), document the local experience threshold, meet each city's insurance requirement and pay its fee; Philadelphia requires its own ICC-administered Philadelphia exam.

Moving to PennsylvaniaLeaving Pennsylvania

Common questions

Do I have to take the Alabama master electrician exam if I'm licensed in Pennsylvania?
Yes. Alabama requires the trade exam on this path.
What does it cost to get a Alabama master electrician license from Pennsylvania?
Published fees on this path total $315, not counting exam vendor fees or bonds.
Do my Pennsylvania work hours count in Alabama?
Yes. Documented out-of-state experience counts toward Alabama's eligibility requirements.
Does it work the other way, from Alabama to Pennsylvania?
Not necessarily. Reciprocity is directed. Going from Alabama to Pennsylvania, the mechanism is not applicable.

Sources

  1. Alabama Administrative Code Chapter 303-X-3 - Licensing (certified rules effective February 14, 2026) · Ala. Admin. Code 303-X-3-.02, -.03, -.06, -.10 · Alabama Board of Electrical Contractors · Admin Rule · verified September 15, 2026303-X-3-.02: electrical contractor applicants must document 8,000 hours of design, planning, lay-out and direct supervision of electrical construction (or 8,000 hours as a journeyman in charge of jobs); the license is unlimited in voltage and bid amount; (10) the Board may recognize a license from a reciprocating state with equal or greater standards, the list of approved reciprocal states is kept at the Board office and the Executive Director approves or denies reciprocal applicants. 303-X-3-.03: journeyman applicants must document 8,000 hours; (6) same reciprocity language. 303-X-3-.06(2): an electrical contractor by reciprocity must hold a current and valid license in a qualifying reciprocal state with no previous or pending disciplinary action. 303-X-3-.10 (effective January 17, 2026): EC exam $165, journeyman exam $115, EC license $150, journeyman license $35, renewals $150/$35, Reciprocal Electrical Contractor License $315.
  2. Form ECE-1 - Electrical Contractor Examination Application · Alabama Board of Electrical Contractors · Form · verified September 15, 2026Requires a minimum of four years or 8,000 hours of supervisory electrical construction experience (designed, planned, laid out and directly supervised electrical construction) documented by notarized affidavits from a licensed electrical contractor, inspector or project manager, with W-2/1099 forms; education substitutes up to 2,000 hours; exam choices are the Alabama Electrical Contractor exam (Prov, $165) or the NASCLA Portable EC exam ($165).
  3. Alabama Board of Electrical Contractors - Fees · Alabama Board of Electrical Contractors · Agency Page · verified September 15, 2026Fee table: EC exam $165; journeyman exam $115; EC license $150; journeyman license $35; EC renewal $150; journeyman renewal $35; EC late renewal $50 per year up to 5 years; inactive EC certificate $75; inactive journeyman certificate $15; replacement card $25; Reciprocal License Application Fee $315.
  4. Alabama Board of Electrical Contractors - Forms and Testing Information (How to Get Licensed; Reciprocal Applications) · Alabama Board of Electrical Contractors · Agency Page · verified September 15, 2026Defines the Electrical Contractor (interchangeable with 'Master Electrician') and Journeyman Electrician licenses; exam fees $165 (EC) and $115 (journeyman), license fees $150 (EC) and $35 (journeyman); exams by Prov on the 2023 NEC (2026 NEC from January 1, 2027); NASCLA exams offered. Lists the reciprocal boards: Mississippi, Tennessee, North Carolina, South Carolina, Virginia, Ohio and Louisiana (EC only) and Texas (EC or Journeyman); states the Board no longer shares reciprocity with Georgia; gives the five reciprocity steps (Alabama Business and Law exam, notarized reciprocity application, $315 fee effective February 14, 2026, Verification of License form, foreign-corporation registration) and that the NASCLA Electrical Contractors exam also qualifies for reciprocal licensing.
  5. Code of Alabama 1975, Title 34, Chapter 36 - Electrical Contractors and Journeyman Electricians · Ala. Code §§ 34-36-3, 34-36-7, 34-36-13 · Alabama Board of Electrical Contractors (compilation of the Code of Alabama) · Statute · verified September 15, 2026§34-36-3 defines Electrical Contractor (a person qualified to plan, lay out and supervise electrical installations with four years as a journeyman in charge of jobs or four years in design and construction) and Journeyman Electrician. §34-36-7(b): the Board may recognize a license issued by any other state with standards equal to or higher than Alabama's and shall actively seek to reciprocate; §34-36-7(c): licenses are issued only to a person, never to a firm; §34-36-7(d): no new provisional (local-license-based) contractor licenses after May 15, 2024. §34-36-13(a): no person may perform work as a master or journeyman electrician without a license from the Board or from the county or municipality where the work is performed; §34-36-13(b)(2): local governments may examine electricians but a holder of a valid statewide Board license is deemed qualified in every county and municipality.

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related