LicensebyState

Pennsylvania to New Mexico: master electrician license reciprocity

No credit· Start overVerified September 15, 2026· 5 sources

Pennsylvania does not issue a statewide master electrician license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state master or electrical contractor (all states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

An out-of-state master electrician or electrical contractor receives no exam waiver in New Mexico. The applicant files the qualifying party application with PSI ($36) and a notarized work-experience affidavit showing four years of experience in the EE-98 classification within the past ten years, then must pass the EE-98 trade exam (three parts, $269.06) and the Contractor's Business and Law exam ($68.88), or complete a commission-approved business and law course in place of that exam. Out-of-state experience is accepted on the affidavit. Once the certificate of qualification is issued, the individual or business applies for the EE-98 contractor's license ($30 application under 14.5.5 NMAC; $100 per year or $200 for two years) and must carry workers' compensation coverage.

The RLD page states the QP application fee as $36 and the license application fee as $36 plus license fees, while 14.5.5.8 NMAC states the contractor license application fee as $30; the amounts below follow the RLD page for the QP fee and the rule for the license fees. A contractor license in New Mexico may be held by an individual as sole proprietor. No official page describes a reciprocal agreement or exam waiver for qualifying parties from any state.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Four years of practical or related trade experience in the EE-98 classification within the ten years immediately before application (NMSA 60-13-14(A)(8); 14.6.6.10(B)(1)(a) NMAC)

What you'll do to get licensed in New Mexico

  1. 1Application fee. Pay the application fee ($36). Qualifying party application fee paid to PSI, with notarized work-experience affidavit.
  2. 2Trade exam. Pass the destination's trade exam. EE-98 Residential and Commercial Electrical exam, three parts, administered by PSI.
  3. 3Exam fee. Pay the exam fee ($269.06). PSI fee for the three-part EE-98 exam; a single failed part is retaken for $89.69.
  4. 4Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam (required of all new candidates) or a commission-approved business and law course.
  5. 5Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam.
  6. 6Contractor license. Hold or obtain a contractor license ($30). EE-98 contractor's license application fee, non-refundable (14.5.5.8 NMAC).
  7. 7License fee. Pay the license or certificate fee ($200). EE-98 contractor's license fee, $100 per year or $200 for the two-year license term (14.5.5.8 NMAC).
  8. 8Insurance. Carry the required insurance. Workers' compensation coverage is required for all licensed entities.

Published fees on this path total $573.94, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Exam fee · $269.06
  • Law / code exam
  • Exam fee · $68.88

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

How New Mexico licenses master electricians

New Mexico master electrician · “EE-98 Electrical Contractor (qualifying party certificate of qualification)

Statewide license

Verified September 15, 2026· 4 sources

Issued by New Mexico Regulation and Licensing Department, Construction Industries Division (CID)

New Mexico has no license called 'master electrician'. Its highest electrical credential is the EE-98 electrical contractor classification (all electrical systems and wiring methods at 5,000 volts nominal or less), which is issued by CID in two parts: the contractor's license goes to the contracting entity, and a personal, non-transferable certificate of qualification goes to the qualifying party, the individual who passed the EE-98 three-part trade exam and the Contractor's Business and Law exam and is responsible for the licensee's code compliance. Because the certificate of qualification is held by a person and earned by examination, this site maps it to the master level. A qualifying party needs four years of experience in the classification within the ten years before application. CID publishes reciprocity only for EE-98J journeymen; no reciprocity or exam waiver is published for qualifying parties or EE-98 contractors, although NMSA 60-13-14(C) allows the division to enter into reciprocal agreements with states having equivalent requirements.

Moving to New MexicoLeaving New Mexico

Why Pennsylvania has nothing to transfer

Pennsylvania master electrician

Licensed by cities and counties

Verified September 15, 2026· 14 sources

Pennsylvania issues no statewide master electrician or electrical contractor license; none of the Department of State's licensing boards covers the trade, so the master-level credential exists only at the city level under names that vary: Philadelphia's Electrical Contractor License (four years with a licensed contractor, the ICC-administered Philadelphia Electrical Contractor exam, eight hours of NFPA 70 coursework, insurance, $60 application, $262 license and $202 annual renewal), Pittsburgh's Electrical Trade License (six years of combined experience and education, an ICC National Standard Master Electrician exam or the city exam, $1M/$2M liability insurance, $90 per year with eight hours of CE), and Master Electrician licenses in Allentown (four years, ICC G16, $50 application), Harrisburg (six years, ICC master exam, $125), Reading (two years as a journeyman, ICC G16Y, $90) and Scranton (four years plus ICC master exam, $250), with Erie licensing electrical contractors through its Trades Licensing Board. Because nearly every city relies on the ICC National Standard Master Electrician exam, a passing ICC score earned in another state is the most portable credential, and Pittsburgh's rules expressly allow the License Officer to accept equivalent out-of-state certification tests. Formal reciprocity is limited to Harrisburg (Maryland, Delaware and several Pennsylvania cities) and Reading (a published list that includes Delaware, Maryland, Michigan, New Jersey, South Carolina, Virginia and West Virginia); an out-of-state master must otherwise apply to each city separately, document local experience thresholds and pay each city's fees.

How local licensing works in Pennsylvania

How local licensing works. Pennsylvania has no state electrical board. Each city that licenses electricians does so under its own ordinance through a local board, and a license is valid only in the issuing city unless that city's rules recognize another jurisdiction. Nearly all cities use ICC exams, and several accept any ICC master exam regardless of code year.

Philadelphia. The Department of Licenses and Inspections issues the Electrical Contractor License (Philadelphia Code 9-1006), the city's only master-level electrician credential; it is issued to the individual, who must also hold a Commercial Activity License. Requirements: a minimum of four years of employment doing electrical work for a company licensed through a local or state jurisdiction (two years of electrical education equals one year of experience, up to two years), proven by tax records from a licensed contractor or proof of licensure through a local or state jurisdiction subject to L&I approval; a passing Philadelphia Electrical Contractor Examination administered by ICC referencing the current Philadelphia Code (or an application within 12 months of passing); eight hours of NFPA 70 coursework approved by the PA Department of Labor and Industry within the preceding 12 months; general liability $500,000 per occurrence, auto $300,000 and workers' compensation $100,000/$100,000/$500,000 naming the city as certificate holder. Fees: $60 non-refundable application, $262 license, $202 annual renewal with a 1.5 percent monthly surcharge after 60 days. Out-of-state licensure can serve as proof of experience but does not waive the Philadelphia exam.

Pittsburgh. The Department of Permits, Licenses and Inspections issues the Electrical Trade License to individuals performing work that requires an electrical permit (PLI Rules VI.6; PCC 747). Applicants show a passing City-proctored Master Electrical exam or an ICC Standard Master Electrician exam for any code year (T16, G16, F16 or older) and six years of combined experience and education evaluated by the License Officer, with employer or licensed-electrician statements; insurance is $1,000,000 per occurrence / $2,000,000 aggregate general liability plus workers' compensation or a no-employee affidavit. The license costs $90 (2025 fee schedule), expires 365 days from issue and renews with eight hours of continuing education. PLI Rule VI.1(E)(d) states that equivalent certification testing programs from other states are accepted upon the License Officer's determination of equivalence.

Allentown. The Electricians' Examining Board issues a Master license on four years of practical experience and the ICC National Standard Master exam (G16); applicants must be over 21 with a high school diploma or GED, pay a $50 non-refundable application fee, obtain Board approval before scheduling the exam, and pay an annual license fee set in the Business Regulation and Tax Code. No reciprocity provision is published.

Harrisburg. The Bureau of Codes issues a Master Electrician license ($125) on six years of practical experience or four years of technical school plus four years, with a passing ICC Master, National Standard Master or Pennsylvania (Philadelphia) Standard Master exam, insurance of $1,000,000 property damage and $300,000 bodily injury per occurrence, and a Mercantile Tax License. Documentation may be by test results or by reciprocity from Allentown, Bethlehem, Lancaster, Reading, Philadelphia, Maryland or Delaware (others considered case by case); a letter of good standing is required from any other Pennsylvania municipality that licenses the applicant.

Reading. The Electrical Board issues a Master Electrician license ($90 annual) to holders of a Reading or reciprocated journeyman license for two years who pass the ICC G16Y master exam. A reciprocal master license ($190 including a one-time reciprocity fee) recognizes licenses from jurisdictions of at least third-class-city standing with an equivalent board and standards; the June 2023 list names Bethlehem, Easton, Erie, Harrisburg, Philadelphia and Scranton, Springfield MO, Sullivan County NY, and the states of Delaware, Maryland (master), Michigan, New Jersey, South Carolina, Virginia and West Virginia. Reciprocal licenses become permanent Reading licenses.

Scranton. Licensing, Inspections and Permits issues a Master Electrical contractor license ($250, calendar year) on four years under a licensed contractor (W-2s or 1099s), a passing ICC/UCC Master Electrical exam, general liability of $500,000 per person / $1,000,000 per occurrence and a Single Tax Office registration; an alternative route uses eight years of experience plus notarized referral letters in place of the exam. The form asks for copies of licenses held in other municipalities but states no reciprocity rule.

Erie. All electrical work must be done by an electrical contractor licensed by the City of Erie and only master license holders may obtain permits; the Trades Licensing Board reviews applications under Article 333 of the Codified Ordinances (not openable), which per the Board page also provides 90-day temporary apprentice and journeyman licenses.

Out-of-state holders. Apart from Harrisburg's and Reading's lists there is no reciprocity. The practical path is to present an ICC National Standard Master Electrician exam result (accepted by Pittsburgh for any code year and by Harrisburg, Allentown, Reading and Scranton), document the local experience threshold, meet each city's insurance requirement and pay its fee; Philadelphia requires its own ICC-administered Philadelphia exam.

Moving to PennsylvaniaLeaving Pennsylvania

Common questions

Do I have to take the New Mexico master electrician exam if I'm licensed in Pennsylvania?
Yes. New Mexico requires the trade exam on this path, plus a law or code exam.
What does it cost to get a New Mexico master electrician license from Pennsylvania?
Published fees on this path total $573.94, not counting exam vendor fees or bonds.
Do my Pennsylvania work hours count in New Mexico?
Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
Does it work the other way, from New Mexico to Pennsylvania?
Not necessarily. Reciprocity is directed. Going from New Mexico to Pennsylvania, the mechanism is not applicable.

Sources

  1. Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 · NMSA 1978 §§ 60-13-2(E), 60-13-14, 60-13-16, 60-13-38 · New Mexico Regulation and Licensing Department · Statute · verified September 15, 2026§60-13-2(E): a 'qualifying party' is an individual who submits to the examination for a license and is responsible for the licensee's compliance. §60-13-14(A)(8): a contractor license applicant needs four years of trade experience within the ten years before application. §60-13-14(C): the division, with the commission's consent, may enter into a reciprocal licensing agreement with any state having equivalent licensing requirements. §60-13-16: no certificate of qualification is issued until the individual passes the division's exam, which includes business/law and, for EE classifications, a technical exam; the certificate is not transferable. §60-13-38: journeymen must hold a certificate of competence obtained by examination; eligibility for the journeyman electrician exam requires four years of accredited training, apprenticeship or practical experience (two years commercial/industrial); 16 hours of continuing education per three-year code cycle for EE-98J.
  2. 14.5.5 NMAC - Fees (Construction Industries Division) · 14.5.5.8 and 14.5.5.9 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 15, 2026Non-refundable contractor's license application fee $30.00; license fee $100.00 per year or $200.00 for two years for the GA-98, GB-2, GB-98, GF-98, EE-98 and MM-98 classifications and $50.00 per year or $100.00 for two years for all other classifications (including MM-3). Journeyman certificate renewal fee $25.00 per year (14.5.5.9).
  3. 14.6.6 NMAC - Classification and Scope of Licenses and Certificates (mechanical and plumbing) · 14.6.6.10 and 14.6.6.11 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 15, 2026MM-3 Heating, Ventilation and Air Conditioning: four years of experience; scope is to 'install, alter, repair, service and maintain HVAC air handling and refrigeration equipment and piping, including fans, coils, condensing units, self-contained packaged air conditioning or heating units, evaporative cooling units, and ductwork' plus controls at 24 volts or less. MM-98 Mechanical (four years) covers MM-1 through MM-4 and the MS-3, MS-6, MS-12 and MS-14 specialties. Journeyman classifications: JR Journeyman Refrigeration (two years; 'must demonstrate compliance with environmental protection agency (EPA) recovery requirements before certificate may be issued'; works under MM-3, MM-4, MM-98 or JSM) and JSM Journeyman Sheet Metal (two years; works under MM-3 or MM-98).
  4. State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 15, 2026Text extracted from the PDF locally. Business and Law exam 'REQUIRED OF ALL NEW CANDIDATES' $68.88, or an approved Business and Law course may be taken instead; trade exams for MM-1, MM-2, MM-3, MM-4 and the MS specialties are $68.88 each, first time or retake. MM-3 Heat, Vent and Air Conditioning exam: 100 questions, 245 minutes, 75% (75 points) to pass, open book on the 2021 Uniform Mechanical Code, 2015 New Mexico Mechanical Code and Modern Refrigeration and Air Conditioning; content covers motors/controls, piping, heating and cooling equipment, refrigerants and refrigeration, and ductwork/ventilation. No reciprocity or out-of-state exam waiver is described.
  5. NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 15, 2026Section 'Reciprocal Journeyman in New Mexico': 'The only journeyman classification reciprocated in New Mexico is EE-98J, residential and commercial electrical'; no mechanical or refrigeration journeyman classification is reciprocated. Section 'Becoming a Qualifying Party': QP applicants need the required years of experience within the 10 years before application, must pass the classification exam(s) and a Contractor's Business and Law exam, must be pre-approved to schedule exams, and pay a $36 QP application and work-experience affidavit fee; the company license application fee is $36 plus license fees. No reciprocity is mentioned for qualifying parties or contractors.

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related