Do I have to take the Connecticut journeyman HVAC technician exam if I'm licensed in Florida?

Yes. Connecticut requires the trade exam on this path.

What does it cost to get a Connecticut journeyman HVAC technician license from Florida?

Published fees on this path total $269, not counting exam vendor fees or bonds.

Do my Florida work hours count in Connecticut?

Yes. Documented out-of-state experience counts toward Connecticut's eligibility requirements.

Does it work the other way, from Connecticut to Florida?

Not necessarily. Reciprocity is directed. Going from Connecticut to Florida, the mechanism is not applicable.

Florida to Connecticut: journeyman HVAC technician license reciprocity

No credit· Start overVerified September 15, 2026· 8 sources

Florida does not issue a statewide journeyman HVAC technician license, so there is nothing to transfer. Here is Connecticut's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Journeyperson by equivalent out-of-state license (all states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

An HVAC technician licensed in any other state applies under DCP's 'Heating Journeyperson - Equivalent Out of State License' path. DCP reviews one out-of-state license for equivalency: it must have required the same number of classroom hours (576 for the S-2), an equivalent classroom curriculum matching DCP's Exhibit A courses, and the same on-the-job training hours (8,000 for the S-2) as the Connecticut license applied for; the limited D-2 class needs 4,000 OJT and 432 classroom hours and the B-2 needs 2,000 and 288. The applicant submits a copy of the license, an official license verification, the laws and regulations that set the requirements met to obtain it, and the scope of work for that license; only one license will be reviewed and the $90 application fee is non-refundable. If the license is found equivalent, DCP approves the applicant to sit the S-2 exam with PSI ($59 per portion, eligibility valid one year), and the license is issued after passing on payment of the $120 initial license fee. The out-of-state license does not waive the Connecticut exam because Connecticut has no reciprocal agreements. If the license cannot be shown equivalent, the applicant must instead document 576 classroom hours and 8,000 OJT hours with transcripts and notarized employer letters under the equivalent experience and training path.

DCP's out-of-state license page does not itself restate that the exam is required; the exam requirement follows from the Heating, Cooling and Sheet Metal Work Licenses page (every individual applicant must take an exam), CGS 20-334a(a)(2) (competency shown by the state licensure examination) and the PSI bulletin (the State determines eligibility, then the candidate tests). CGS 20-333a permits licensure without examination only where the other state reciprocates for Connecticut licensees, and DCP states no such agreements exist. Many states issue a single HVAC or refrigeration license rather than a heating-piping-cooling license with a 576-hour curriculum, so an applicant may be found equivalent only to a limited class such as the D-2. Neither DCP page mentions EPA Section 608; it is a federal requirement that applies regardless. Typical processing time is not published.

At a glance

Trade exam: Required
Law / code exam: Not required
Out-of-state hours: Count toward eligibility

What you must already have

Your Florida license must be active and in good standing.
The out-of-state license must be equivalent: it required the same classroom hours (576 for the S-2; 432 for the D-2; 288 for the B-2), an equivalent curriculum matching Exhibit A, and the same OJT hours (8,000 S-2; 4,000 D-2; 2,000 B-2) as the Connecticut class applied forOnly one out-of-state license is reviewed for equivalency.
You must document at least 8,000 hours of qualifying work experience.On-the-job training hours required for the S-2; demonstrated through the equivalent out-of-state license or, failing that, through notarized employer letters under the experience and training path.

What you'll do to get licensed in Connecticut

1Application fee. Pay the application fee ($90). Journeyperson application fee, non-refundable (CGS 20-333).
2Other. Copy of the out-of-state license, official license verification, the laws/regulations listing the requirements met to obtain it, and the scope of work for that license.
3Trade exam. Pass the destination's trade exam. S-2 Unlimited Heating, Piping and Cooling Journeyperson exam administered by PSI: 70 questions, 3 hours, 70% to pass, open book (D-2: 60 questions, 2 hours; B-2: 40 questions, 1.5 hours).
4Exam fee. Pay the exam fee ($59). PSI examination fee per portion, not refundable or transferable (same fee for retakes).
5License fee. Pay the license or certificate fee ($120). Initial license fee for a journeyperson license after passing the exam (CGS 20-335); renews annually for $120, expiring August 31.
6Other. EPA Section 608 technician certification (Type I/II/III/Universal) to handle refrigerants; federal, does not expire.

Published fees on this path total $269, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

Trade exam
Exam fee · $59
Other

How Connecticut licenses journeyman HVAC technicians

Connecticut journeyman HVAC technician · “S-2 Unlimited Heating, Piping and Cooling Journeyperson”

Statewide license

Verified September 15, 2026· 6 sources

Issued by Connecticut Department of Consumer Protection, Occupational and Professional Licensing (Heating, Piping, Cooling and Sheet Metal Work Examining Board)

Connecticut licenses HVAC work statewide through the Department of Consumer Protection (DCP) as 'heating, piping and cooling' work; the journeyman-level credential is the S-2 Unlimited Heating, Piping and Cooling Journeyperson, which covers all heating, piping and cooling work defined in CGS 20-330 while employed by a licensed contractor. Narrower journeyperson classes exist for technicians whose experience is limited to part of the trade, chiefly the D-2 Limited Warm Air, Air Conditioning and Refrigeration Journeyperson (no oil burner servicing) and the B-2 Limited Gas and Oil Burner Journeyperson, plus D-4 cooling-only, G-2 gas piping and S-10 light heating-cooling classes. A new S-2 applicant qualifies through a Connecticut apprenticeship, through equivalent experience and training (8,000 on-the-job hours and 576 classroom hours), or by holding an equivalent out-of-state license, and in every path must pass the PSI-administered S-2 exam (70 questions, 3 hours, 70%, open book). DCP states that Connecticut does not have reciprocal agreements with any other jurisdiction, even though CGS 20-333a would allow the Commissioner to waive the exam for licensees of states that reciprocate. The application fee is $90, the exam is $59 per portion and the initial license fee is $120; licenses expire every August 31 and renew for $120. EPA Section 608 refrigerant certification is a separate federal requirement for anyone handling refrigerants.

Moving to Connecticut Leaving Connecticut

Why Florida has nothing to transfer

Florida journeyman HVAC technician · “Journeyman Air Conditioning / Mechanical Journeyman certificate of competency (county-issued)”

Licensed by cities and counties

Verified September 15, 2026· 11 sources

Issued by County and municipal licensing boards (no state journeyman license)

Florida has no state journeyman HVAC license. The Construction Industry Licensing Board within DBPR certifies and registers air-conditioning and mechanical contractors only; the contracting statute never defines 'journeyman', and the Board's pages and FAQs contain no journeyman credential. Section 489.1455, F.S., instead authorizes counties and municipalities to issue journeyman licenses 'in the plumbing, pipe fitting, mechanical, or HVAC trades' to a person who scores at least 75 percent on a proctored journeyman exam, has completed a registered apprenticeship or 12,000 hours of on-the-job training, and completes Florida Building Commission coursework, and it requires every county and municipality to recognize a journeyman licensed by any other Florida county or municipality. The large South Florida and Tampa Bay counties run such programs (Miami-Dade's Journeyman Air Conditioning, Heating and Refrigeration certificates, Broward's Mechanical Journeyman, Pinellas's Air Conditioning Journeyman) with three years of experience and a 70-75% open-book exam, while other counties such as Hillsborough license no mechanical journeyman at all and technicians simply work as employees of a certified or registered contractor. An out-of-state journeyman or HVAC technician license carries no state-level recognition in Florida and none of the county programs reviewed publishes an out-of-state reciprocity rule (Miami-Dade reciprocates only with Broward and Palm Beach counties), so an arriving technician should expect to document experience and take the county exam in the first county that requires a card, after which that card is portable statewide. EPA Section 608 certification is federal and required of anyone handling refrigerants regardless of any Florida card.

How local licensing works in Florida

How local licensing works. DBPR's Construction Industry Licensing Board certifies (statewide) and registers (locally qualified) air-conditioning and mechanical contractors and issues no personal license below contractor. Section 489.1455, F.S. lets counties and municipalities license journeymen in the plumbing, pipe fitting, mechanical and HVAC trades on three conditions: 75 percent on a proctored Block and Associates or other board-approved journeyman exam, a registered and state-approved apprenticeship or 12,000 hours of on-the-job training, and Florida Building Commission-approved coursework (within 6 months of certification). Subsection (2) makes every county and municipality recognize a journeyman licensed by any other Florida county or municipality. A journeyman card never authorizes contracting; the holder works under a certified or registered contractor.

Miami-Dade County. The Construction Trades Qualifying Board issues Journeyman Air Conditioning, Journeyman Room Air Conditioning, Journeyman General Mechanical, Journeyman Heating, Journeyman Refrigeration, Journeyman Warm Air Heating and Journeyman Sheet Metal certificates. Applicants need three years of proven experience in the trade (up to one-half may be equivalent education), documented with employer letters and W-2s, must pass an open-book exam with 75 percent or above, and pay $240. A journeyman 'may only work in the employ of a contractor holding a certificate of competency in the field in which the journeyman is certified', one journeyman is required for every three trainees on a job site, and continuing education is required each certificate term. The county 'only reciprocates with Broward and Palm Beach County in specific trade categories', and only for journeymen who scored 75% or higher.

Broward County. The Building Code Division's Central Examining Boards certify a Mechanical Journeyman (plus Insulation and Sheet Metal Journeymen). Requirements: at least three years of experience in the mechanical field, a notarized affidavit from the licensed employer, the last three years of W-2s, two passport photos, and a GITS or ProV exam with a minimum passing grade of 75 percent; journeymen do not take the Business & Law exam. Since January 1, 2025 the journeyman application fee is $225, renewal $120 and a letter of reciprocity $50; the application offers 'License by Reciprocity' for holders of other Florida county cards, and the packet warns that a Board-accepted lower score 'may not be' reciprocable to another county or state.

Pinellas County. The Pinellas County Construction Licensing Board certifies an Air Conditioning Journeyman (and Pipe Fitting and Sheet Metal Journeymen) under Chapter 75-489, Laws of Florida; the open-book exam by an independent testing agency has a 70 percent passing grade, the application fee is $75, and applicants file notarized employer experience certificates, six years of employment history and three character letters. The county states that journeymen 'must be certified by the Pinellas County Construction Licensing Board (PCCLB) to work in our county.'

Hillsborough County. Development Services issues journeyman certificates of competency only to electricians and plumbers; its contractor-licensing forms list no mechanical, HVAC or air-conditioning journeyman card, so HVAC technicians in the Tampa area work under a licensed contractor without a personal certificate.

Out-of-state holders. No county page reviewed describes reciprocity for a journeyman or technician license from another state; Miami-Dade limits reciprocity to two neighboring counties and Pinellas prints no reciprocity provision at all. Palm Beach County's contractor certification page could not be opened on this verification date and is not described here.

Moving to Florida Leaving Florida

Common questions

Do I have to take the Connecticut journeyman HVAC technician exam if I'm licensed in Florida?: Yes. Connecticut requires the trade exam on this path.
What does it cost to get a Connecticut journeyman HVAC technician license from Florida?: Published fees on this path total $269, not counting exam vendor fees or bonds.
Do my Florida work hours count in Connecticut?: Yes. Documented out-of-state experience counts toward Connecticut's eligibility requirements.
Does it work the other way, from Connecticut to Florida?: Not necessarily. Reciprocity is directed. Going from Connecticut to Florida, the mechanism is not applicable.

Sources

Connecticut General Statutes Chapter 393 - Occupational Licensing (Electrical, Plumbing and Piping, Heating, Cooling...) · CGS §§ 20-333, 20-333a, 20-334a, 20-335 · Connecticut General Assembly · Statute · verified September 15, 2026§20-333: non-refundable application fee of $90 for limited licenses and journeyman-type licenses under 20-334a(a)(2)-(3) and $150 for unlimited contractor licenses under 20-334a(a)(1); competency is shown by examination. §20-333a Reciprocity: the Commissioner may grant a license without examination to a currently practicing, competent person holding a similar license from another state with substantially similar or higher requirements, but only if that state grants the same privilege to Connecticut licensees; DCP reports no such agreements exist. §20-334a(a)(1)(A): an unlimited contractor's license may be issued to a person who served as a journeyman in the trade for at least two years 'and, if such service as a journeyman was outside this state, has furnished evidence satisfactory to the appropriate state board or the department that such service is comparable to similar service in this state', and has passed the examination; (a)(2)(A): an unlimited journeyman's license requires a bona fide apprenticeship including not less than four years' experience and passing the state licensure examination. §20-335: initial license fee $150 for a contractor's license and $120 for any other license; licenses expire annually; renewal $150 contractor / $120 other. The page returned a TLS certificate error to the fetch tool on 2026-09-15 and was downloaded directly with curl to read the section text.
Connecticut DCP - Heating, Cooling and Sheet Metal Work Licenses (application paths, fees, renewal) · Connecticut Department of Consumer Protection · Agency Page · verified September 15, 2026Landing page for the heating, piping and cooling trades. Lists the three contractor paths (2+ years as a journeyperson, equivalent experience and training, equivalent out-of-state license) and the three journeyperson paths (Connecticut apprenticeship completion, equivalent experience and training, equivalent out-of-state license). Application fee: contractor $150, journeyperson $90, non-refundable; renewal contractor $150, journeyperson $120; licenses expire annually on August 31. States that DCP licenses individuals only, that every individual applicant must take an exam with separate fees due to the exam vendor, that the department does not pre-approve applications, and, verbatim, 'Connecticut does not have reciprocal agreements with any other jurisdiction.'
Connecticut DCP - Heating Journeyperson: Equivalent Experience and Training · Connecticut Department of Consumer Protection · Agency Page · verified September 15, 2026Fallback path when an out-of-state license is not found equivalent. Same hour table as the out-of-state page (S-2 8,000 OJT / 576 classroom, D-2 4,000/432, B-2 2,000/288). Accepted proof: transcripts, degrees and diplomas matching the Exhibit A courses, notarized employer letters with dates and detailed work descriptions, and out-of-state apprenticeship completion certificates with hours. Not accepted: continuing-education or manufacturer certificates, non-equivalent classes, payroll records, W-2s, tax returns or letters that are not notarized. Both the classroom hours and the OJT hours must be proven.
Connecticut DCP - Heating Journeyperson: Equivalent Out of State License · Connecticut Department of Consumer Protection · Agency Page · verified September 15, 2026Defines an equivalent out-of-state license as one that required the same number of classroom hours, an equivalent classroom curriculum and the same on-the-job training hours as the Connecticut license applied for. Table: S-2 8,000 OJT hours and 576 classroom hours; S-4 8,000/576; S-8 8,000/576; S-10 6,000/576; D-2 4,000/432; D-4 4,000/396; B-2 2,000/288; B-4 4,000/360; G-2 1,000 OJT. Required documents: copy of the out-of-state license, license verification, the laws and regulations showing the requirements met to obtain it, and the scope of work. Verbatim: 'DO NOT SUBMIT DOCUMENTS FOR MORE THAN ONE OUT OF STATE LICENSE. ONLY ONE LICENSE WILL BE REVIEWED FOR EQUIVALENCY.' and 'APPLICATION FEES ARE NONREFUNDABLE.' The page itself does not restate the exam requirement.
Connecticut DCP - Heating, Piping, Cooling and Sheet Metal Work Examining Board · Connecticut Department of Consumer Protection · Agency Page · verified September 15, 2026Twelve-member board (contractors, journeypersons and public members) that advises DCP on licensing and examination of heating, piping, cooling and sheet metal contractors and journeypersons under CGS 20-330 et seq.
Connecticut DCP - Heating, Piping and Cooling License Types and Scope of Work · Connecticut Department of Consumer Protection · Agency Page · verified September 15, 2026S-1 Unlimited Heating, Piping and Cooling Contractor: all heating, piping and cooling work as defined in CGS 20-330. S-2 Unlimited Heating, Piping and Cooling Journeyperson: same scope, working for a licensed contractor. Also defines the limited classes: D-1/D-2 Limited Warm Air, Air Conditioning and Refrigeration (no oil burner servicing), D-3/D-4 Limited Cooling, B-1/B-2 Limited Gas and Oil Burner (domestic and light commercial, up to 5 gal/hr or 500,000 BTU), B-3/B-4, G-1/G-2 gas piping, S-3/S-4, S-7/S-8, S-9/S-10 (heating and cooling up to 35 tons in buildings of 3 stories or less), PP-1/PP-2 and OE-2.
Connecticut DCP Occupational Licensing - Heating, Piping and Cooling Trades Candidate Information Bulletin (PSI, updated 2/4/2026) · Connecticut Department of Consumer Protection / PSI Services LLC · Other · verified September 15, 2026Eligibility for examination is determined by the State (DCP approves the application, then PSI schedules); eligibility is valid for one year from State approval. Fee: $59 per examination portion, not refundable or transferable. S-1 Unlimited Heating, Piping and Cooling Contractor: 80 questions, 3 hours, 70%, open book. S-2 Unlimited Heating, Piping and Cooling Journeyperson: 70 questions, 3 hours, 70%, open book. D-1: 70 questions, 3 hours; D-2: 60 questions, 2 hours; B-1: 50 questions, 2 hours; B-2: 40 questions, 1.5 hours; all 70%, open book. Business and Law (all contractors): 50 questions, 2 hours, 70%, open book, based on the NASCLA Contractors Guide to Business, Law and Project Management, Connecticut 6th edition. References include the 2015, 2018 and 2021 International Codes, NFPA 54 (2012), NFPA 31 (2006/2011) and NFPA 58 (2014). The PDF was opened on 2026-09-15 through a text-extraction proxy because the direct fetch returned unreadable binary content.
EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026Federal requirement in every state: technicians who maintain, service, repair or dispose of equipment that could release refrigerants into the atmosphere must be certified (Type I small appliances, Type II high-pressure, Type III low-pressure, Universal). Apprentices under direct supervision are exempt. Certification does not expire; the core exam must be proctored for Universal certification. State HVAC boards commonly require it before licensure, but it is not itself a state license.

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page