LicensebyState

Pennsylvania to North Carolina: journeyman HVAC technician license reciprocity

No credit· Start overVerified September 15, 2026· 8 sources

Pennsylvania does not issue a statewide journeyman HVAC technician license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state journeyman or HVAC technician (all states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

The Board states that there are no license reciprocity agreements with any other state, and its only technical-exam waiver (South Carolina) applies to contractor licenses. An HVAC journeyman or technician licensed elsewhere therefore applies for the Heating Technician examination like a first-time candidate: the Board's technician packet requires 3,000 hours of hands-on experience in installation, maintenance, service or repair of the systems in the group sought, which may have been earned in any state and is documented on the Applicant Employment History form (1-C) with W-2s or 1099s when the applicant did not work under a North Carolina licensee. The $150 exam fee, a Disahealthcare nationwide criminal background report and Form SSA-89 accompany the application; after approval (typically 4-6 weeks) the 4-hour open-book technical exam is scheduled with PSI. There is no business exam at this level. A North Carolina resident who holds a journeyman-level HVAC license from Virginia or West Virginia may instead ask for recognition under the Neighbor State License Recognition Act (see the agreements below).

Out-of-state experience is accepted on Form 1-C; the packet does not require the supervising licensee to be North Carolina-licensed when that form is used. Class I technicians need 3,000 hours; 21 NCAC 50 .0306(i) and the Board's applicant page set 2,500 hours for a Class II (single-family dwellings) technician, although the 2026 technician packet lists 3,000 hours for any technician exam.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Count toward eligibility
Typical processing
About 42 days

What you must already have

  • You must document at least 3,000 hours of qualifying work experience.Hands-on installation, maintenance, service or repair in the heating group sought; up to 50% may be college or technical-institute coursework in the trade.

What you'll do to get licensed in North Carolina

  1. 1Exam fee. Pay the exam fee ($150). Heating Technician examination fee, per exam, non-refundable (Tech App 2026-06).
  2. 2Trade exam. Pass the destination's trade exam. Heating Technician (Group 1, 2 or 3) technical examination administered by PSI: 4.0 hours, open book on the NC State Building Code volumes listed on the Board's Book Reference List.
  3. 3Background check. Complete a background check. Nationwide criminal background report ordered by the applicant from Disahealthcare/CastleBranch (package ST46) and printed copy attached; applicant pays the vendor.
  4. 4Other. Form SSA-89 Social Security Number verification (the Board cannot license anyone whose SSN cannot be verified) and notarized experience verification forms with W-2s/1099s.
  5. 5Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).

Published fees on this path total $150, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Exam fee · $150
  • Trade exam
  • Other · if applicable

How North Carolina licenses journeyman HVAC technicians

North Carolina journeyman HVAC technician · “Heating Technician (Group 1, 2 or 3; Class I or II)”

Statewide license

Verified September 15, 2026· 7 sources

Issued by North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors

North Carolina has no license called 'journeyman HVAC'. The closest state-issued, person-held credential below contractor level is the Heating Technician license from the State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors: an individual who has passed the 4-hour technical examination for Heating Group 1 (hydronic), Group 2 (forced air over 15 tons) or Group 3 (forced air 15 tons or less), Class I (any building) or Class II (single-family dwellings), but not the business and law examination. A technician license is not a contracting license and is not required to work for a living: any W-2 employee of a licensed heating contractor may perform work under the contractor's license, so the technician license mainly lets its holder be listed as a sub-licensee to help supervise work, or qualify a state, local-government or private-school maintenance department. Eligibility is 3,000 hours of hands-on installation, maintenance, service or repair experience (up to half from technical education), a $150 exam fee, a nationwide criminal background report and Social Security verification. The Board publishes no reciprocity for any state at this level; an out-of-state journeyman documents their hours on the Board's employment-history form and takes the technical exam. Refrigeration (commercial, industrial, transport and service, but not comfort cooling) is licensed separately by the State Board of Refrigeration Contractors, which licenses only contractors and has no technician-level credential. EPA Section 608 certification is required federally to handle refrigerants.

Moving to North CarolinaLeaving North Carolina

Compare: getting a North Carolina license from scratch

Why Pennsylvania has nothing to transfer

Pennsylvania journeyman HVAC technician

Licensed by cities and counties

Verified September 15, 2026· 16 sources

Pennsylvania has no statewide HVAC license at any level: none of the Department of State's 29 licensing boards covers heating, air-conditioning, refrigeration or mechanical work, and the only state-level credential touching the trade is the Attorney General's Home Improvement Contractor registration, which registers businesses doing residential work and involves no exam. Journeyman-level HVAC licensing exists only where a city ordinance creates it, and most cities do not: Philadelphia and Pittsburgh license no HVAC journeyman (Philadelphia's only person-held HVAC-related license is the Sheet Metal Technician license for ductwork, and Pittsburgh's Mechanical/HVAC Trade License is a master-level credential under which employees work unlicensed). Reading issues a Journeyman Mechanical Installer license based on a four-year apprenticeship and the ICC Journeyman Mechanical exam, and Erie's ordinance defines a mechanical journeyman by completion of the ICC Journeyman Certificate Exam. An out-of-state HVAC journeyman license has no state-level recognition in Pennsylvania; Reading will issue a reciprocal journeyman license ($150) to holders of an equivalent license from a first-, second- or third-class city with standards equal to its own, and otherwise the technician works as an employee of whatever contractor holds the local license. Federal EPA Section 608 certification is required everywhere in the state for anyone who handles refrigerants.

How local licensing works in Pennsylvania

How local licensing works. Pennsylvania licenses no HVAC workers at the state level, so each city decides for itself whether to license the trade, and licensing is done under local ordinances by city trade boards or code offices. Most municipalities require only a permit pulled by a contractor plus the statewide Home Improvement Contractor registration for residential work.

Philadelphia. No HVAC or mechanical license of any kind. Mechanical permits must be performed by a business holding L&I's general Contractor License ($126 a year, insurance and OSHA 30, no exam), and 'sheet metal work must be performed by a registered sheet metal technician or apprentice employed by the contractor'. The Sheet Metal Technician License ($189 for three years) is the only person-held HVAC-related credential; it requires a completed U.S. DOL or state-registered sheet metal apprenticeship (8,000 hours of work plus 800 hours of instruction) and has no exam and no out-of-state provisions.

Pittsburgh. No journeyman license. The Mechanical/HVAC Trade License is issued to an individual who passes an ICC master mechanical exam and shows four years of experience; other workers perform mechanical work as employees under a licensee.

Reading. Issues a Journeyman Mechanical Installer license ($50 a year). Applicants must be employed by a registered mechanical contractor and registered with the Pennsylvania apprenticeship bureau, complete a four-year approved apprenticeship with at least 216 hours of instruction per year (or eight years under a registered mechanical contractor), and pass the ICC F31-N Journeyman Mechanical exam or its successor. A reciprocal journeyman license ($150, including a one-time reciprocation fee) may be issued to the holder of an equivalent license from a first-, second- or third-class U.S. city issued by an equivalent board with standards equal to Reading's; the applicant attaches the other jurisdiction's current requirements. Reading's list names Harrisburg, Philadelphia, Scranton, Lancaster and Pittsburgh and 'most, if not all, surrounding states with a state license'.

Erie. The Bureau of Building Standards and Safety issues master licenses for Mechanical and HVAC Installers and a separate Refrigeration license, and the contractor licensing ordinance defines a journeyman as one qualified 'through formal apprenticeship, on-the-job experience and after successful completion of the International Code Council (ICC) Journeyman Certificate Exam', with apprentices completing 8,000 working hours and 800 classroom hours before testing. Scranton and Altoona license HVAC/mechanical contractors at the master or business level (see the master level) and have no journeyman license.

Out-of-state holders. No city publishes a reciprocity path for out-of-state journeyman licenses except Reading, whose reciprocal license depends on the origin credential coming from a city (or a state) with equivalent standards. Elsewhere a journeyman from another state simply works for a locally licensed contractor.

Moving to PennsylvaniaLeaving Pennsylvania

Common questions

Do I have to take the North Carolina journeyman HVAC technician exam if I'm licensed in Pennsylvania?
Yes. North Carolina requires the trade exam on this path.
What does it cost to get a North Carolina journeyman HVAC technician license from Pennsylvania?
Published fees on this path total $150, not counting exam vendor fees or bonds.
Do my Pennsylvania work hours count in North Carolina?
Yes. Documented out-of-state experience counts toward North Carolina's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 42 days.
Does it work the other way, from North Carolina to Pennsylvania?
Not necessarily. Reciprocity is directed. Going from North Carolina to Pennsylvania, the mechanism is not applicable.

Sources

  1. EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
  2. N.C.G.S. 87-21 - Definitions; contractors licensed by Board; examination; posting license · N.C.G.S. 87-21(a), (b), (g) · North Carolina General Assembly · Statute · verified September 23, 2026
  3. NC State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors - Applicant Information · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
  4. Application Packet for Persons Applying for Plumbing, Heating or Fuel Piping Contractor License (Form PHFP-1, 2026-06) · G.S. 87-21(g) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Form · verified September 23, 2026
  5. Exam Information 2026 - exam durations · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
  6. License Definitions - Technician (2025 v1) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
  7. Application Packet for Persons Qualifying for Plumbing, Heating or Fuel Piping Technician License (Tech App 2026-06) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Form · verified September 23, 2026
  8. NC State Board of Refrigeration Contractors - General FAQ · North Carolina State Board of Refrigeration Contractors · Faq · verified September 15, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related