South Carolina to North Carolina: journeyman HVAC technician license reciprocity
South Carolina does not issue a statewide journeyman HVAC technician license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state journeyman or HVAC technician (all states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
The Board states that there are no license reciprocity agreements with any other state, and its only technical-exam waiver (South Carolina) applies to contractor licenses. An HVAC journeyman or technician licensed elsewhere therefore applies for the Heating Technician examination like a first-time candidate: the Board's technician packet requires 3,000 hours of hands-on experience in installation, maintenance, service or repair of the systems in the group sought, which may have been earned in any state and is documented on the Applicant Employment History form (1-C) with W-2s or 1099s when the applicant did not work under a North Carolina licensee. The $150 exam fee, a Disahealthcare nationwide criminal background report and Form SSA-89 accompany the application; after approval (typically 4-6 weeks) the 4-hour open-book technical exam is scheduled with PSI. There is no business exam at this level. A North Carolina resident who holds a journeyman-level HVAC license from Virginia or West Virginia may instead ask for recognition under the Neighbor State License Recognition Act (see the agreements below).
Out-of-state experience is accepted on Form 1-C; the packet does not require the supervising licensee to be North Carolina-licensed when that form is used. Class I technicians need 3,000 hours; 21 NCAC 50 .0306(i) and the Board's applicant page set 2,500 hours for a Class II (single-family dwellings) technician, although the 2026 technician packet lists 3,000 hours for any technician exam.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 42 days
What you must already have
- You must document at least 3,000 hours of qualifying work experience.Hands-on installation, maintenance, service or repair in the heating group sought; up to 50% may be college or technical-institute coursework in the trade.
What you'll do to get licensed in North Carolina
- 1Exam fee. Pay the exam fee ($150). Heating Technician examination fee, per exam, non-refundable (Tech App 2026-06).
- 2Trade exam. Pass the destination's trade exam. Heating Technician (Group 1, 2 or 3) technical examination administered by PSI: 4.0 hours, open book on the NC State Building Code volumes listed on the Board's Book Reference List.
- 3Background check. Complete a background check. Nationwide criminal background report ordered by the applicant from Disahealthcare/CastleBranch (package ST46) and printed copy attached; applicant pays the vendor.
- 4Other. Form SSA-89 Social Security Number verification (the Board cannot license anyone whose SSN cannot be verified) and notarized experience verification forms with W-2s/1099s.
- 5Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).
Published fees on this path total $150, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Exam fee · $150
- Trade exam
- Other · if applicable
How North Carolina licenses journeyman HVAC technicians
North Carolina journeyman HVAC technician · “Heating Technician (Group 1, 2 or 3; Class I or II)”
Statewide license
Issued by North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors
North Carolina has no license called 'journeyman HVAC'. The closest state-issued, person-held credential below contractor level is the Heating Technician license from the State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors: an individual who has passed the 4-hour technical examination for Heating Group 1 (hydronic), Group 2 (forced air over 15 tons) or Group 3 (forced air 15 tons or less), Class I (any building) or Class II (single-family dwellings), but not the business and law examination. A technician license is not a contracting license and is not required to work for a living: any W-2 employee of a licensed heating contractor may perform work under the contractor's license, so the technician license mainly lets its holder be listed as a sub-licensee to help supervise work, or qualify a state, local-government or private-school maintenance department. Eligibility is 3,000 hours of hands-on installation, maintenance, service or repair experience (up to half from technical education), a $150 exam fee, a nationwide criminal background report and Social Security verification. The Board publishes no reciprocity for any state at this level; an out-of-state journeyman documents their hours on the Board's employment-history form and takes the technical exam. Refrigeration (commercial, industrial, transport and service, but not comfort cooling) is licensed separately by the State Board of Refrigeration Contractors, which licenses only contractors and has no technician-level credential. EPA Section 608 certification is required federally to handle refrigerants.
Why South Carolina has nothing to transfer
South Carolina journeyman HVAC technician · “Journeyman HVAC trade certification card (CAGC SC Trades Certification, formerly MASC) - not a state license”
Licensed by cities and counties
Issued by Local building departments, using the CAGC SC Trades Certification (formerly MASC) journeyman card
South Carolina has no state journeyman HVAC license. The LLR Contractor's Licensing Board licenses mechanical contractors (entities qualified by an individual qualifying party) for air-conditioning, heating and refrigeration work over $10,000, and the Residential Builders Commission licenses Residential HVAC Installers and Repairers for residential work over $500; neither chapter of the contractor law creates a journeyman or technician credential, so an HVAC technician who is not a contractor works under one of those licensees with no state license. The journeyman-level credential that does exist is the trade certification card of the SC Mechanical Trades Certification Program, run since 1965 by the Municipal Association of South Carolina (the association of the state's cities) and, since January 1, 2026, by the Carolinas AGC Foundation; the program's own page says the card is not a license and must not be represented as one. No reciprocity or out-of-state acceptance is published for the journeyman card, so an arriving technician should expect to apply to CAGC ($35 application, PROV exam) if a local jurisdiction or employer requires a card. EPA Section 608 certification is federal and required of everyone handling refrigerants regardless of any South Carolina card.
How local licensing works in South Carolina
How local licensing works. State law licenses contractors, not technicians: S.C. Code § 40-11-30 requires a Contractor's Licensing Board license (Mechanical Contractor with the Air Conditioning, Heating, Refrigeration or Packaged Equipment classification) for mechanical contracting work whose total cost exceeds $10,000, and Chapter 59 requires a Residential Builders Commission license for residential heating and air-conditioning work over $500. Employees of those licensees need no state credential. The Contractor's Licensing Board home page lists no journeyman license, and the Residential Builders Commission licenses the Residential HVAC Installer and Repairer, not a journeyman.
The trades certification card. The SC Mechanical Trades Certification Program was created in 1965 by the Municipal Association of South Carolina to give municipalities a common examination and certification for the mechanical trades. MASC handed the program to the Carolinas AGC Foundation on January 1, 2026; cards issued by MASC remain valid until the expiration printed on them, and CAGC now issues verification letters. CAGC charges a $35 application fee ($35 to re-test), uses PROV as its exam provider, and states that the card 'should not be confused with' the LLR mechanical contractor or residential specialty licenses and that a holder will not represent the card as evidence of a license. The master-level HVAC card, the HARV (Master Mechanical) certification issued by exam by MASC between September 7, 2013 and December 2025 or by CAGC after January 1, 2026, is accepted by LLR as a technical-exam waiver for the Mechanical Contractor Air Conditioning and Heating classifications and for the Residential HVAC Installer and Repairer license, which is the card's main statewide use. Technicians should ask the local building department where they will work.
Out-of-state holders. Neither CAGC nor MASC publishes reciprocity for journeyman licenses from other states, and LLR's waiver agreements apply only to contractor-level exams. An out-of-state journeyman or HVAC technician can work for a licensed South Carolina contractor without any state credential and, if a card is required locally, applies to CAGC.
Common questions
- Do I have to take the North Carolina journeyman HVAC technician exam if I'm licensed in South Carolina?
- Yes. North Carolina requires the trade exam on this path.
- What does it cost to get a North Carolina journeyman HVAC technician license from South Carolina?
- Published fees on this path total $150, not counting exam vendor fees or bonds.
- Do my South Carolina work hours count in North Carolina?
- Yes. Documented out-of-state experience counts toward North Carolina's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 42 days.
- Does it work the other way, from North Carolina to South Carolina?
- Not necessarily. Reciprocity is directed. Going from North Carolina to South Carolina, the mechanism is not applicable.
Sources
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
- N.C.G.S. 87-21 - Definitions; contractors licensed by Board; examination; posting license · N.C.G.S. 87-21(a), (b), (g) · North Carolina General Assembly · Statute · verified September 23, 2026
- NC State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors - Applicant Information · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
- Application Packet for Persons Applying for Plumbing, Heating or Fuel Piping Contractor License (Form PHFP-1, 2026-06) · G.S. 87-21(g) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Form · verified September 23, 2026
- Exam Information 2026 - exam durations · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
- License Definitions - Technician (2025 v1) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
- Application Packet for Persons Qualifying for Plumbing, Heating or Fuel Piping Technician License (Tech App 2026-06) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Form · verified September 23, 2026
- NC State Board of Refrigeration Contractors - General FAQ · North Carolina State Board of Refrigeration Contractors · Faq · verified September 15, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.