Wyoming to North Carolina: journeyman HVAC technician license reciprocity
Wyoming does not issue a statewide journeyman HVAC technician license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state journeyman or HVAC technician (all states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
The Board states that there are no license reciprocity agreements with any other state, and its only technical-exam waiver (South Carolina) applies to contractor licenses. An HVAC journeyman or technician licensed elsewhere therefore applies for the Heating Technician examination like a first-time candidate: the Board's technician packet requires 3,000 hours of hands-on experience in installation, maintenance, service or repair of the systems in the group sought, which may have been earned in any state and is documented on the Applicant Employment History form (1-C) with W-2s or 1099s when the applicant did not work under a North Carolina licensee. The $150 exam fee, a Disahealthcare nationwide criminal background report and Form SSA-89 accompany the application; after approval (typically 4-6 weeks) the 4-hour open-book technical exam is scheduled with PSI. There is no business exam at this level. A North Carolina resident who holds a journeyman-level HVAC license from Virginia or West Virginia may instead ask for recognition under the Neighbor State License Recognition Act (see the agreements below).
Out-of-state experience is accepted on Form 1-C; the packet does not require the supervising licensee to be North Carolina-licensed when that form is used. The Board's applicant page lists 2,500 hours for a Class II technician while the 2026 technician packet states 3,000 hours for any single plumbing or heating technician exam; the packet figure is used here.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 42 days
What you must already have
- You must document at least 3,000 hours of qualifying work experience.Hands-on installation, maintenance, service or repair in the heating group sought; up to 50% may be college or technical-institute coursework in the trade.
What you'll do to get licensed in North Carolina
- 1Exam fee. Pay the exam fee ($150). Heating Technician examination fee, per exam, non-refundable (Tech App 2026-06).
- 2Trade exam. Pass the destination's trade exam. Heating Technician (Group 1, 2 or 3) technical examination administered by PSI: 4.0 hours, open book on the NC State Building Code volumes listed on the Board's Book Reference List.
- 3Background check. Complete a background check. Nationwide criminal background report ordered by the applicant from Disahealthcare/CastleBranch (package ST46) and printed copy attached; applicant pays the vendor.
- 4Other. Form SSA-89 Social Security Number verification (the Board cannot license anyone whose SSN cannot be verified) and notarized experience verification forms with W-2s/1099s.
- 5Other. EPA Section 608 technician certification (Type I/II/III/Universal) to handle refrigerants; federal, does not expire. The Board's packet does not list it as a licensing prerequisite..
Published fees on this path total $150, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Exam fee · $150
- Trade exam
- Other
How North Carolina licenses journeyman HVAC technicians
North Carolina journeyman HVAC technician · “Heating Technician (Group 1, 2 or 3; Class I or II)”
Statewide license
Issued by North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors
North Carolina has no license called 'journeyman HVAC'. The closest state-issued, person-held credential below contractor level is the Heating Technician license from the State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors: an individual who has passed the 4-hour technical examination for Heating Group 1 (hydronic), Group 2 (forced air over 15 tons) or Group 3 (forced air 15 tons or less), Class I (any building) or Class II (single-family dwellings), but not the business and law examination. A technician license is not a contracting license and is not required to work for a living: any W-2 employee of a licensed heating contractor may perform work under the contractor's license, so the technician license mainly lets its holder be listed as a sub-licensee to help supervise work, or qualify a state, local-government or private-school maintenance department. Eligibility is 3,000 hours of hands-on installation, maintenance, service or repair experience (up to half from technical education), a $150 exam fee, a nationwide criminal background report and Social Security verification. The Board publishes no reciprocity for any state at this level; an out-of-state journeyman documents their hours on the Board's employment-history form and takes the technical exam. Refrigeration (commercial, industrial, transport and service, but not comfort cooling) is licensed separately by the State Board of Refrigeration Contractors, which licenses only contractors and has no technician-level credential. EPA Section 608 certification is required federally to handle refrigerants.
Why Wyoming has nothing to transfer
Wyoming journeyman HVAC technician
Licensed by cities and counties
Wyoming has no statewide HVAC, refrigeration or mechanical license at any level; the only state trade-licensing program is the Department of Fire Prevention and Electrical Safety's electrician program, whose closest credential is the LM-H Limited Technician license for the electrical wiring of HVAC systems. Licensing of HVAC journeymen exists only where a city ordinance creates it. Cheyenne, Casper, Laramie and Gillette each license HVAC/mechanical journeymen (and apprentices) individually, all built on the ICC National Standard mechanical exams (Casper names G31-N/G29-N) and four years of documented apprentice-level experience, while Rock Springs only registers contractors with proof of insurance and licenses no individuals. None of these cities publishes reciprocity with other states' HVAC licenses: Casper's and Gillette's reciprocity provisions apply only to other Wyoming jurisdictions, Cheyenne's Board may grant reciprocity 'as the Board determines appropriate' and treats even in-state licenses case by case, and Laramie's building official may issue a certificate without examination to the holder of a certificate from any other governmental agency whose exam is judged at least equal. In practice an out-of-state journeyman brings their ICC mechanical exam certificate (or takes it through Pearson VUE) and applies in each city where they will work. EPA Section 608 certification is federal and required everywhere refrigerants are handled; Cheyenne and Gillette require it expressly for refrigeration licenses.
How local licensing works in Wyoming
How local licensing works. Wyoming licenses electricians at the state level but not HVAC, refrigeration, sheet metal or plumbing workers, so HVAC licensing is entirely a matter of city ordinance and varies by city. The state's reciprocity statute cited by the cities covers only licenses from other Wyoming jurisdictions.
Cheyenne. The Contractor Licensing Board licenses HVAC and refrigeration contractors (Class C1, tested) and requires every employee on an HVAC or refrigeration job site to hold a master, journeyman or apprentice license. A journeyman must document 4 years/8,000 hours as a licensed apprentice (or certified equivalent training) with third-party verification and pass a current ICC, NICET or NASCLA exam from the Board's list (paid to the testing agency); a residential plumbing/mechanical journeyman needs 2 years/4,000 hours. Fees: $50 application plus $30 initial, $15 renewal; apprentices $25 + $25. Refrigeration applicants must submit EPA Type II, III or Universal certification. A 30-day temporary work authorization is available to trade employees registered for the exam. Reciprocity (3.3.2): the Board may grant reciprocity with other jurisdictions as it determines appropriate and may accept a test exceeding the published exams from someone holding a current equivalent license elsewhere, but no partner list is published.
Casper. The Community Development Department issues Mechanical Journeyman licenses ($25 new, $15 renewal) to applicants who show completion of a federally recognized mechanical apprenticeship or the equivalent of four years in a Casper-licensed mechanical shop and proof of passing ICC G31-N, G29-N or equivalent; applications with notarized experience affidavits and exam proof go to the Chief Building Official, and the fee and insurance follow approval. Reciprocal licenses ($50/$25) exist only for holders of a current license from another Wyoming jurisdiction with comparable testing.
Laramie. Code Administration issues journeyman, master and apprentice certificates of qualification in mechanical, refrigeration and gas service; a mechanical journeyman needs 4 years as an apprentice (refrigeration and gas service 3) and passes the building official's exam (ICC-based, 2024 cycle; $5 application fee per exam). In lieu of the exam the building official may issue a certificate to anyone presenting a valid certificate from any other governmental agency whose exam the board of examiners considers at least equal, which is the only city provision that can reach an out-of-state license. Applications are filed through the Civic Access portal.
Gillette. Class D HVAC contractors must employ a Master of Record, and all master, journeyman and apprentice HVAC technicians are licensed individually by the Building Inspection Division. A Journeyman HVAC Mechanical license requires four years of approved experience and passing ICC exam results ($25 annual); apprentices need thirty days with a Gillette-licensed HVAC contractor ($5). Journeyman refrigeration technicians additionally need ESCO/EPA 608 certification. Since July 1, 2024 the Board of Examiners grants fee-free reciprocity only to active licenses from other Wyoming local governments; proof of the ICC mechanical exam satisfies all testing.
Rock Springs. Contractors register with the Building Inspection Office ($125, certificate of insurance); no individual HVAC licenses or exams exist.
Out-of-state holders. No Wyoming city publishes a reciprocity or endorsement path for another state's HVAC journeyman license. The portable credential is the ICC National Standard mechanical exam (Journeyman G31-N or Master G29-N), which Cheyenne, Casper, Laramie and Gillette all accept; an out-of-state journeyman who already holds an ICC certificate can generally apply directly, and one who tested on a state-specific exam should expect to take the ICC exam or, in Laramie, ask the board of examiners to treat the origin exam as equal.
Common questions
- Do I have to take the North Carolina journeyman HVAC technician exam if I'm licensed in Wyoming?
- Yes. North Carolina requires the trade exam on this path.
- What does it cost to get a North Carolina journeyman HVAC technician license from Wyoming?
- Published fees on this path total $150, not counting exam vendor fees or bonds.
- Do my Wyoming work hours count in North Carolina?
- Yes. Documented out-of-state experience counts toward North Carolina's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 42 days.
- Does it work the other way, from North Carolina to Wyoming?
- Not necessarily. Reciprocity is directed. Going from North Carolina to Wyoming, the mechanism is not applicable.
Sources
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026Federal requirement in every state: technicians who maintain, service, repair or dispose of equipment that could release refrigerants into the atmosphere must be certified (Type I small appliances, Type II high-pressure, Type III low-pressure, Universal). Apprentices under direct supervision are exempt. Certification does not expire; the core exam must be proctored for Universal certification. State HVAC boards commonly require it before licensure, but it is not itself a state license.
- N.C.G.S. 87-21 - Definitions; contractors licensed by Board; examination; posting license · N.C.G.S. 87-21(a), (b), (g) · North Carolina General Assembly · Statute · verified September 15, 2026Defines heating Group 1 (steam, vapor or hot water comfort heating), Group 2 (systems with mechanical refrigeration over 15 tons circulating conditioned air; single-family residences always Group 3) and Group 3 (direct heating/cooling with refrigeration of 15 tons or less), and the technician licenses including the State and Local Government technician license. Subsection (g): the Board may grant licenses of the same or equivalent classification to contractors licensed by other states without written examination upon satisfactory proof that their qualifications are substantially equivalent, on payment of the usual license fee.
- NC State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors - Applicant Information · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 15, 2026Lists the contractor licenses (Plumbing & Heating Groups 1, 2, 3) and technician licenses (Plumbing & Heating Class I and II). Experience: Plumbing/Heating Contractor 4,000 hours (2 years), Technician Class I 3,000 hours (18 months), Technician Class II 2,500 hours (15 months), up to half from academic or technical training. States verbatim: 'There are no license reciprocity agreements with any other state', that North Carolina has a Technical Examination Waiver Agreement with South Carolina for plumbing and HVAC contractors under which applicants must still pass the North Carolina business law exam, and that NC residents licensed in Georgia, South Carolina, Tennessee, Virginia or West Virginia may be eligible for equivalent licensure under the Neighbor State License Recognition Act. Processing time averages six weeks. Fetched through the r.jina.ai text proxy after the direct fetch returned a page without the reciprocity paragraphs.
- Application Packet for Persons Applying for Plumbing, Heating or Fuel Piping Contractor License (Form PHFP-1, 2026-06) · G.S. 87-21(g) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Form · verified September 15, 2026Exam fee $150 per exam, non-refundable; separate application per classification (Heating Group 1 Class I/II, Heating Group 2, Heating Group 3 Class I/II). Experience: 4,000 hours for every heating contractor classification, educational credit up to 50% at 66.66 hours per semester hour; an H3-I licensee receives 50% credit on an H2 application and vice versa. Quotes G.S. 87-21(g) and states: 'There is no license reciprocity. All applicants must meet the North Carolina experience requirements. The technical exam waiver applies only to the technical section of the exam' and that the only technical examination waiver agreement is with South Carolina: SC Residential HVAC -> Heating Group 3 Class II; SC Commercial Mechanical Heating (HT) -> Heating Group 1 Class I; SC Commercial Mechanical Air Conditioning (AC) -> Heating Group 2 and Heating Group 3 Class I; SC Commercial Mechanical Packaged Equipment (PK) -> Heating Group 3 Class I; the applicant must have taken and passed the SC technical exam and the SC board emails a License Verification to the NC Board. Experience earned outside NC is documented on Form 1-C (Applicant Employment History) with W-2s/1099s. Nationwide criminal background report from Disahealthcare (applicant pays), Form SSA-89, and the required code and reference books are mandatory. Applicants who pass the technical portion but fail the business portion may request the corresponding Technician license. The military-spouse section prints the licensure-without-examination fees: $30 application fee and $150 annual license fee. Exams are scheduled with PSI after approval; processing 4-6 weeks.
- Exam Information 2026 - exam durations · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 15, 2026Heating Group 1, 2 and 3 Contractor exams are 4.0 hours plus a 1.5-hour Business and Law exam; Heating Technician (Group 1, 2 or 3) exam is 4.0 hours with no business exam. The Business and Law exam is waived only for applicants who already hold an active contractor license with this Board and passed the Board's Business and Law exam after August 2003.
- License Definitions - Technician (2025 v1) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 15, 2026A technician licensee is an individual who has passed the technical examination but not the business law examination; a technician license is not a contracting license; a technician working as a bona fide W-2 employee of a contractor may perform work covered by the contractor's license; a technician must be a sub-licensee of the contractor to assist with supervision. Lists H1-T-I, H1-T-II, H2-T and H3-T (Class I and II) heating technician qualifications.
- Application Packet for Persons Qualifying for Plumbing, Heating or Fuel Piping Technician License (Tech App 2026-06) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Form · verified September 15, 2026Heating technician exam requires 3,000 hours of experience in installation, maintenance, service or repair (education courses credited at 50%); exam fee $150 per exam, non-refundable; licensure without exam (e.g. a current contractor licensee taking the equivalent technician license) costs a $30 application fee plus $150 activation fee. Qualifications offered: Heating Group 1 Tech Class I/II, Heating Group 2 Technician, Heating Group 3 Tech Class I/II. Same Disahealthcare background report and SSA-89 requirements as the contractor packet; experience outside NC is documented on Form 1-C.
- NC State Board of Refrigeration Contractors - General FAQ · North Carolina State Board of Refrigeration Contractors · Faq · verified September 15, 2026Q1: 'North Carolina does not have reciprocity with any other states.' Q5: anyone who installs, repairs or maintains commercial, transport or industrial refrigeration equipment must be licensed or supervised by someone who is licensed. Exam application $100; CFC (EPA 608) test $40 per test; lapsed-license reinstatement $120. Links the 'Licensure Requirements for New Residents' document.
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.