Colorado to Iowa: master HVAC technician license reciprocity
Colorado does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Iowa's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state master or HVAC contractor (all states): direct admission to the Iowa master exam
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Iowa has no master-level HVAC reciprocity with any state. An applicant who was previously licensed as a master in the applicable discipline in another state or local jurisdiction is admitted to the Iowa master HVAC/refrigeration exam without having to hold an Iowa journeyperson license first (Iowa Code 105.18(2)(c); 481 IAC 429.6(3)(i)); the applicant files the $35 exam approval application, pays Kirkwood's exam fee ($119 per attempt), passes with 75%, and then files the post-examination licensure application with a prorated three-year fee ($240 for a full term). An applicant who has established Iowa residency may instead apply for licensure by verification under Iowa Code 272C.12 and 481 IAC 430.4, but the board still requires proof of passing the applicable Iowa licensing examination and can issue only a temporary license until then. To contract independently the master (or the firm employing the master) must also obtain the Contractor license and DIAL contractor registration ($250 plus $150 for a full term, 30% discount when bought with the master license in one transaction), with $500,000 liability insurance, a $5,000 surety bond, and for out-of-state contractors a $25,000 bond under chapter 91C; the board's reciprocity form states there is no reciprocity for contractor licenses.
Contractor license fees, insurance and bond are listed as optional requirements because they apply only to a master who contracts independently. The exam fee is the amount Kirkwood Community College currently charges for every Iowa plumbing and mechanical exam; DIAL's own pages still show older figures. DIAL says to allow up to two weeks for an exam approval application to be processed.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
What you must already have
- Previously licensed as a master in the applicable discipline in another state or local jurisdiction, or a licensed journeyperson with at least two years of journey-level experience in the discipline (Iowa Code 105.18(2)(c); 481 IAC 429.6(3)(i))
- Your Colorado license must be active and in good standing.
- You must have no disciplinary action or unresolved complaints on your record.For licensure by verification: no revocation, surrender under investigation, unresolved discipline or pending complaint (272C.12(1)(e)-(g); 481 IAC 430.4(3)).
- Licensure by verification requires established Iowa residency or a military spouse's permanent change of station to Iowa (272C.12(1)(b); 481 IAC 430.4(2)(d))
What you'll do to get licensed in Iowa
- 1Application fee. Pay the application fee ($35). Examination approval application fee, per discipline (481 IAC 428.1(4)).
- 2Trade exam. Pass the destination's trade exam. Iowa Master HVAC/Refrigeration examination administered through Kirkwood Community College; 75% to pass; also required of licensure-by-verification applicants under 481 IAC 430.4(2)(e).
- 3Exam fee. Pay the exam fee ($119). Kirkwood Community College examination fee, per attempt, non-refundable.
- 4License fee. Pay the license or certificate fee ($240). Master license fee for a full three-year term (July 1, 2026 to June 30, 2029), prorated one-sixth per six-month period; same amount for a license by verification.
- 5Application fee. Pay the application fee ($25) (if applicable). Paper application fee if not filed through the online portal.
- 6Contractor license. Hold or obtain a contractor license ($400) (if applicable). PMSB Contractor license ($250) plus DIAL contractor registration ($150) for a full three-year term, prorated; required only to contract independently; 30% discount on license fees when bought with the master license in one transaction.
- 7Insurance. Carry the required insurance ($500,000) (if applicable). Public liability insurance of at least $500,000 for a contractor license (Iowa Code 105.19).
- 8Surety bond. Post a surety bond ($5,000) (if applicable). Surety bond of at least $5,000 for a contractor license; out-of-state contractors must also file a $25,000 bond under Iowa Code chapter 91C.
- 9Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).
Published fees on this path total $394, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee · $119
- Other · if applicable
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Contractor license · $400 · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $500,000 · if applicable
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $5,000 · if applicable
How Iowa licenses master HVAC technicians
Iowa master HVAC technician · “Master HVAC-Refrigeration”
Statewide license
Issued by Iowa Plumbing and Mechanical Systems Board, Department of Inspections, Appeals, and Licensing (DIAL)
Iowa's highest person-held HVAC credential is the Master HVAC-Refrigeration license issued by the Plumbing and Mechanical Systems Board (DIAL); a Master Mechanical license, which adds sheet metal and hydronic work, is issued to anyone who passes both the master HVAC-refrigeration and master hydronic exams. A new master applicant must have previously been a licensed journeyperson in the discipline with at least two years of journey-level experience, or have been licensed as a master in the discipline in another state or local jurisdiction, and must pass the Iowa master exam (75%) through Kirkwood Community College. The separate Contractor license is a business credential: a sole proprietor or firm that contracts for HVAC work must hold or employ a master in each discipline, carry $500,000 liability insurance and a $5,000 surety bond (out-of-state contractors add a $25,000 chapter 91C bond), and register as a contractor with DIAL on the same application. Iowa has no HVAC reciprocity agreement with any state and states plainly that there is no reciprocity for contractor licenses. An out-of-state master may sit the Iowa master exam directly on the strength of the out-of-state license; Iowa residents may use licensure by verification but the board still requires the Iowa exam. Licenses run three years and require eight hours of continuing education per term.
Why Colorado has nothing to transfer
Colorado master HVAC technician
Licensed by cities and counties
Colorado issues no state master HVAC, mechanical or contractor license; the state licenses only electricians and plumbers, and mechanical licensing is left entirely to cities, counties and regional building departments. The master-level credential is therefore a local supervisor certificate or mechanical contractor license. Denver issues person-held Heating and Ventilating Class A and Class B and Refrigeration Class A and Class B supervisor certificates (6 to 8 years of experience plus the ICC F29 Master Mechanical or F32 Residential Mechanical exam, $60 for three years) and then licenses the mechanical contractor that employs the certificate holder ($250 for three years). The Pikes Peak Regional Building Department licenses Mechanical Contractors in classes H-A commercial, H-B residential and H-C specialty classes on the ICC W29 Master Mechanical, W32 Residential Mechanical or N33 Master Gas Pipe Fitter exams ($100 per license plus a $50 application fee). Neither jurisdiction recognizes out-of-state licenses: Denver does not reciprocate certificates from other counties or states and PPRBD accepts no out-of-state exams, so an arriving master HVAC contractor documents experience locally and passes the ICC exam required by each jurisdiction where they will pull permits.
How local licensing works in Colorado
How local licensing works. With no state mechanical license, each Colorado jurisdiction licenses mechanical contractors under its own code, nearly always on ICC National Standard exams (Pearson VUE, $100 each). PPRBD's notice says that 'often, contractors who work in several areas must pass an exam in each jurisdiction,' although many jurisdictions honor the same ICC certificate.
Denver. Licensing is a two-step process. First the individual obtains a supervisor certificate: Heating and Ventilating Class A (commercial and residential heating, ventilation and cooling up to 50 tons; 8 years of experience, 4 as a journeyman and 4 in design or supervision; ICC #F29 National Standard Master Mechanical), Heating and Ventilating Class B residential only (6 years; ICC #F32 National Standard Residential Mechanical), Heating, Ventilating, A/C residential only (6 years each in heating/ventilation and refrigeration; ICC #F32; refrigeration up to 5 tons), Refrigeration Class A (8 years; ICC #F29) or Refrigeration Class B residential only (6 years; ICC #F32). Experience is documented with notarized letters from employers or clients for projects completed within the last 10 years, and the ICC pass letter is due within 90 days of approval. Supervisor certificates cost $60 and renew every 3 years. Second, the business applies for a mechanical contractor license ($250, 3 years), which must be held by or employ a certificate holder. Denver 'does not accept or reciprocate contractor licenses and/or certificates from other counties or states.'
Colorado Springs and El Paso County (PPRBD). Mechanical Contractor licenses: H-A Mechanical Commercial (ICC W29 Master Mechanical), H-B Mechanical Residential (ICC W32 Residential Mechanical), H-C1 Gas Piping (ICC N33 Master Gas Pipe Fitter), H-C2 Commercial Refrigeration, H-C3 Residential Maintenance/Repair and H-C4 Residential Remodeling, each with a $100 license fee, plus a $50 application fee, references documenting relevant experience, a liability insurance certificate naming PPRBD (minimums in RBC201.7) and a name-based judicial record check; the Licensing Committee and Board of Review act on each application monthly. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and 'no out-of-state exams will be accepted.'
Other jurisdictions. Only Denver and PPRBD were verified for this entry; other Colorado cities and counties license mechanical contractors under similar ICC-based ordinances and should be checked individually.
Out-of-state holders. No Colorado jurisdiction checked publishes reciprocity or endorsement for another state's master HVAC or mechanical contractor license. The practical route is to pass the ICC National Standard Master Mechanical (or Residential Mechanical) exam once and apply in each jurisdiction, each of which separately verifies experience.
Common questions
- Do I have to take the Iowa master HVAC technician exam if I'm licensed in Colorado?
- Yes. Iowa requires the trade exam on this path.
- What does it cost to get a Iowa master HVAC technician license from Colorado?
- Published fees on this path total $394, not counting exam vendor fees or bonds.
- Do my Colorado work hours count in Iowa?
- Yes. Documented out-of-state experience counts toward Iowa's eligibility requirements.
- Does it work the other way, from Iowa to Colorado?
- Not necessarily. Reciprocity is directed. Going from Iowa to Colorado, the mechanism is not applicable.
Sources
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
- Iowa Code Chapter 105 - Plumbers, Mechanical Professionals, and Contractors (2026) · Iowa Code 105.2, 105.17, 105.18, 105.19, 105.20, 105.21 · Iowa Legislature · Statute · verified September 23, 2026
- Iowa Code 272C.12 - Licensure of persons licensed in other jurisdictions (2026) · Iowa Code 272C.12 · Iowa Legislature · Statute · verified September 16, 2026
- DIAL - Plumbing & Mechanical Contractor License · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Plumbing & Mechanical Systems Examination · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Plumbing & Mechanical Systems License Period & Fees · 481 IAC ch. 428 · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Master Level License (plumbing, mechanical, HVAC, refrigeration, sheet metal, hydronic) · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Plumbing & Mechanical Systems Licensure (program home) · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- DIAL - Post-Examination Licensure · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
- Iowa Administrative Code 481 Chapter 428 - Plumbing and Mechanical Systems Board Licensure Fees · 481 IAC 428.1 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
- Iowa Administrative Code 481 Chapter 429 - Plumbing and Mechanical Systems Board Application, Licensure, and Examination · 481 IAC 429.2, 429.6 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
- Iowa Administrative Code 481 Chapter 430 - Plumbing and Mechanical Systems Board Alternative Licensure Pathways · 481 IAC 430.3, 430.4, 430.5 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
- Kirkwood Community College - State Disciplines (Iowa plumbing and mechanical examinations) · Kirkwood Community College, the Plumbing and Mechanical Systems Board's contracted exam provider · Form · verified September 23, 2026
- Iowa Plumbing and Mechanical Systems Board - Application for License by Reciprocity (Reciprocity App 03/2020) · Iowa Plumbing and Mechanical Systems Board · Form · verified September 15, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.