Illinois to Alabama: master HVAC technician license reciprocity
Illinois does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Examination with documented out-of-state experience (states without an agreement)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A contractor licensed in a state outside the Board's reciprocal list has no endorsement route: §34-31-29(d) recognizes only licenses covered by a reciprocity agreement, and rule 440-X-3-.04(2) limits reciprocity to 'a qualifying reciprocal state'. The applicant instead files the HVAC/Refrigeration Examination Application (EA-1 to EA-4) with the $175 exam fee and proves eligibility under §34-31-28(c) by 3,000 hours of work experience or graduation from an approved curriculum; experience is documented by notarized Affidavit of Employment forms (EA-4) from each supervising licensee, whose licensing state is recorded on the form, together with W-2 forms showing full-time employment, so hours earned under an out-of-state contractor are credited. After Board approval the candidate schedules the open-book Heating and Air Conditioning exam (115 questions, 5 hours) or Refrigeration exam (90 questions, 4 hours) with Prov and must score 70%. The successful candidate then applies for certification with forms AL-1, AL-2 and BF-1 ($220 active with a $20,000 performance bond in the business name, or $110 inactive) and, if the business entity was formed outside Alabama, registers it as a foreign corporation with the Secretary of State. Rule 440-X-3-.16 lets the Board waive the exam for military members, military spouses and transferred federal personnel who hold a current HVAC, refrigeration or mechanical license in another state.
Applicants must sit for the exam within one year of the application being received (§34-31-29(c)); applications not completed within twelve months may be treated as abandoned. The exam application also accepts certificates of 3,000 hours of HVAC or refrigeration educational training in lieu of work hours. Alabama's pages do not mention EPA Section 608 certification; it is listed here because it is a federal requirement for refrigerant handling.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 3,000 hours of qualifying work experience.3,000 hours of work experience as defined by the Board (the exam application asks for at least two years within the past five years under a licensed contractor, proven by notarized employer affidavits and W-2 forms), or graduation from an approved heating, air conditioning or refrigeration curriculum (§34-31-28(c)).
What you'll do to get licensed in Alabama
- 1Exam fee. Pay the exam fee ($175). Written examination fee per exam (HVAC or Refrigeration), paid to the State with the exam application; non-refundable (440-X-3-.10).
- 2Trade exam. Pass the destination's trade exam. Alabama Heating and Air Conditioning exam (115 questions, 5 hours) or Refrigeration exam (90 questions, 4 hours) administered by Prov; open book, 70% to pass.
- 3License fee. Pay the license or certificate fee ($220). Initial active certification fee (forms AL-1, AL-2, BF-1); annual renewal $220 by December 31; inactive status $110 with no bond.
- 4Surety bond. Post a surety bond ($20,000). Performance bond of $20,000 in the business name naming the Board as obligee (form BF-1), required for active certification (440-X-3-.04(5)).
- 5Other. Notarized Affidavit of Employment (EA-4) from each supervising licensee with corresponding W-2 forms, or transcripts/certificates for an approved curriculum; proof of citizenship or lawful presence.
- 6Business license. Obtain a business license (if applicable). Foreign corporation registration with the Alabama Secretary of State ($150) if the business entity was formed outside Alabama.
- 7Continuing education. Complete continuing education. Four hours of Board-approved continuing education every calendar year to renew (exempt during the first year of certification) (§34-31-26(d)).
- 8Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).
Published fees on this path total $395, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Exam fee · $175
- Trade exam
- Other · if applicable
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $20,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Alabama licenses master HVAC technicians
Alabama master HVAC technician · “Certified Heating and Air Conditioning Contractor (or Certified Refrigeration Contractor)”
Statewide license
Issued by Alabama Board of Heating, Air Conditioning & Refrigeration Contractors
Alabama's HVAC credential is the Certified Heating and Air Conditioning Contractor certification (with a parallel Certified Refrigeration Contractor certification for commercial refrigeration) issued by the Board of Heating, Air Conditioning & Refrigeration Contractors. It is treated here as the master level because it is earned personally by examination: under rule 440-X-3-.04 an individual must satisfy every requirement, and when a partnership, corporation or LLC is certified the certificate is issued in the name of the person in responsible charge together with the business name. A new applicant must show 3,000 hours of work experience (the exam application asks for notarized employer affidavits covering at least two years within the past five years, with W-2 forms) or graduation from an approved HVAC or refrigeration curriculum, then pass the open-book Prov exam ($175; 115 questions, 70% to pass). Active certification costs $220 per year and requires a business name and a $20,000 performance bond; inactive status is $110 with no bond; four hours of continuing education are required each year after the first, and renewal is due by December 31. The Board accepts licenses by reciprocity from Mississippi, Tennessee, Ohio, South Carolina (Residential Building Commission or Contractor's Board), Texas, West Virginia and Louisiana when the applicant passed an equivalent exam with at least 70%; there is no business and law exam, and §34-31-28(d) prohibits counties and municipalities from requiring further local testing of certified contractors.
Why Illinois has nothing to transfer
Illinois master HVAC technician
Licensed by cities and counties
Illinois does not issue a statewide master HVAC or mechanical contractor license and has no state mechanical board; the master-level credential exists only at the municipal level under names that vary by city. Springfield issues a Mechanical License to individuals who document 5 years (residential) or 7 years (commercial) of practical mechanical experience and pass the ICC National Standard Master Mechanical exam (G29); Peoria licenses HVAC contractors on an ICC contractor certificate from the 2018 code cycle or newer ($150 a year); Aurora and Elgin accept the ICC Master Mechanical certification or, in Elgin, a license from any Illinois city that gives a written exam; unincorporated Cook County registers HVAC contractors for a fee with $1,000,000 in liability insurance; and Chicago has no mechanical license at all, requiring a general contractor license to pull permits. None of these jurisdictions publishes a reciprocity or endorsement path for another state's master HVAC license; Springfield's only grandfather clause is limited to licenses issued before October 2007. A master HVAC contractor arriving from another state should expect to pass the ICC Master Mechanical exam once and then license or register separately in each municipality where they will work. EPA Section 608 certification applies to anyone handling refrigerants.
How local licensing works in Illinois
How local licensing works. Illinois has no state HVAC license. Each municipality licenses or registers mechanical contractors under its own ordinance; the ICC National Standard Master Mechanical exam (G29, formerly W29; residential W32) is the common denominator among testing cities.
Chicago. No HVAC or mechanical contractor license. Contractors obtain a General Contractor license from the Department of Buildings in Class A (unlimited project value, $3,500), B ($1,800), C ($1,300), D ($900) or E (projects up to $500,000, $300), each valid one year, with commercial general liability insurance from $1 million per occurrence (Class E) to $5 million (Class A) and a financial solvency statement, administered through Continental Testing Services; no trade exam.
Springfield. The Building and Zoning Department issues a person-held Mechanical License: Residential requires 5 years of practical experience in all types of mechanical work approved by the Mechanical Commission and proof of passing the ICC Master Mechanical Exam G29; Commercial requires 7 years and the same exam. Mechanical contractors also register with the city. A contractor licensed in another Illinois or out-of-state municipality with reciprocal testing may substitute that test only if the license was issued before 10/7/2007 (10/10/2007 in the earlier memo) and never lapsed; all others pass the ICC exam. Passing the exam does not itself guarantee a license.
Peoria. HVAC contractors must be licensed or registered ($150 non-refundable, calendar year) with an ICC contractor test certificate from the 2018 or newer code cycle; holders of current Normal or Pekin licenses register without retesting. Only the licensed contractor may pull permits and must attend inspections.
Aurora. Accepts a current ICC Master Mechanical certification (N29) in lieu of municipal testing; requires a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured; registration through Development Services.
Elgin. Requires a mechanical contractor's license from any Illinois city that gives a written examination, or proof of passing the ICC Master Mechanical G29 exam, plus a $20,000 license and permit bond; the license is not required when an Illinois-licensed architect or engineer seals the plans and accepts responsibility.
Unincorporated Cook County. HVAC contractors register as 'all other trades' with the Department of Building and Zoning: $150 initial and $75 annual per trade, $1,000,000 general liability insurance naming the department; no exam.
Not verified. Naperville's contractor registration page was blocked when opened for this entry; Rockford publishes only electrical registration rules.
Out-of-state holders. None of these jurisdictions publishes reciprocity or endorsement for another state's master HVAC or mechanical license. The practical route is to pass the ICC National Standard Master Mechanical exam (accepted by Springfield, Peoria, Aurora and Elgin), then license or register in each municipality where work will be performed, and obtain a Chicago general contractor license for work in Chicago.
Common questions
- Do I have to take the Alabama master HVAC technician exam if I'm licensed in Illinois?
- Yes. Alabama requires the trade exam on this path.
- What does it cost to get a Alabama master HVAC technician license from Illinois?
- Published fees on this path total $395, not counting exam vendor fees or bonds.
- Do my Illinois work hours count in Alabama?
- Yes. Documented out-of-state experience counts toward Alabama's eligibility requirements.
- Does it work the other way, from Alabama to Illinois?
- Not necessarily. Reciprocity is directed. Going from Alabama to Illinois, the mechanism is not applicable.
Sources
- Alabama HACR Board - HVAC/Refrigeration Examination Application (forms EA-1 to EA-7) with approved curricula and exam references · Alabama Board of Heating, Air Conditioning & Refrigeration Contractors · Form · verified September 23, 2026
- Alabama Board of Heating, Air Conditioning & Refrigeration Contractors - How to Get Licensed (examination, licensure, reciprocity) · Alabama Board of Heating, Air Conditioning & Refrigeration Contractors · Agency Page · verified September 23, 2026
- Code of Alabama 1975, §34-31-18 et seq. and Alabama Administrative Code Chapters 440-X-1 to 440-X-4 (Board compilation, October 17, 2024) · Ala. Code §§ 34-31-18, 34-31-24, 34-31-25, 34-31-26, 34-31-28, 34-31-29, 34-31-30; Ala. Admin. Code 440-X-3-.04, 440-X-3-.10, 440-X-3-.16 · Alabama Board of Heating, Air Conditioning & Refrigeration Contractors · Statute · verified September 23, 2026
- Alabama HACR Board - New License Application (licensure by examination and by reciprocity) · Alabama Board of Heating, Air Conditioning & Refrigeration Contractors · Agency Page · verified September 23, 2026
- Alabama Board of HACR - Candidate Information Bulletin (Prov, AL CIB 2026.10.12) · Prov, Inc. (testing vendor contracted by the Alabama HACR Board) · Form · verified October 12, 2026
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.