LicensebyState

Indiana to North Carolina: master HVAC technician license reciprocity

No credit· Start overVerified September 15, 2026· 11 sources

Indiana does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state master HVAC or HVAC contractor without a waiver (all other states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

The Board's 2026 application packet states that there is no license reciprocity, that all applicants must meet the North Carolina experience requirements, and that 'there are currently no other waivers available for any other states or any other licenses' beyond South Carolina. G.S. 87-21(g) lets the Board license contractors from other states without written examination after 'a complete and exhaustive review' finding the other state's requirements substantially equivalent, but the Board has exercised that authority only for South Carolina. A master HVAC technician or HVAC contractor from any other state therefore applies to sit the examination: 4,000 hours of hands-on experience in the heating group sought (up to half from college or technical-institute coursework), which may have been earned anywhere and is documented on the Applicant Employment History form (1-C) with W-2s or 1099s when it was not earned under a North Carolina licensee. The $150 exam fee, a Disahealthcare criminal background report and Form SSA-89 are submitted with the application; after approval (4-6 weeks) the candidate schedules the 4-hour technical exam and 1.5-hour Business and Law exam with PSI. An applicant who passes the technical portion but fails the business portion may take a Heating Technician license instead. A North Carolina resident licensed in Georgia, Tennessee, Virginia or West Virginia may instead use the Neighbor State License Recognition Act (see agreements).

Separate application and fee for each heating classification. An H3-I licensee gets 50% experience credit toward H2 and vice versa.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 42 days

What you must already have

  • You must document at least 4,000 hours of qualifying work experience.Hands-on installation, maintenance, service or repair of the heating group sought; up to 50% may be college or technical-institute coursework (66.66 hours per approved semester hour).

What you'll do to get licensed in North Carolina

  1. 1Exam fee. Pay the exam fee ($150). Examination fee per classification, non-refundable (Form PHFP-1, 2026-06).
  2. 2Trade exam. Pass the destination's trade exam. Heating Group 1, 2 or 3 Contractor technical examination administered by PSI: 4.0 hours, open book on the NC State Building Code volumes listed on the Board's Book Reference List.
  3. 3Law / code exam. Pass a law, rules, or code exam. North Carolina Business and Law examination: 1.5 hours, based on the Board's Laws & Rules book (G.S. 87 Art. 2 and 21 NCAC 50) and the NC Business and Project Management for Contractors book.
  4. 4License fee. Pay the license or certificate fee ($150). Annual license fee as printed in the Board's 2026 application packet.
  5. 5Background check. Complete a background check. Nationwide criminal background report ordered by the applicant from Disahealthcare/CastleBranch (package ST46); applicant pays the vendor.
  6. 6Other. Form SSA-89 Social Security Number verification, notarized experience verification forms with W-2s/1099s, and the current NC State Building Code, Laws & Rules and Business and Project Management books.
  7. 7Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).

Published fees on this path total $300, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Exam fee · $150
  • Trade exam
  • Law / code exam
  • Other · if applicable

How North Carolina licenses master HVAC technicians

North Carolina master HVAC technician · “Heating Contractor (H1-I / H1-II, H2, H3-I / H3-II)”

Statewide license

Verified September 15, 2026· 11 sources

Issued by North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors

North Carolina has no 'master HVAC' license; its highest HVAC credential is the Heating Contractor license issued to an individual by the State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors under G.S. 87-21, in Heating Group 1 (steam, vapor and hot-water comfort heating), Group 2 (forced-air heating/cooling with more than 15 tons of cooling) and Group 3 (forced-air heating/cooling of 15 tons or less), each with Class I (any building) and Class II (single-family detached dwellings) except Group 2, which is Class I only. The license is earned personally by passing the 4-hour technical exam and the 1.5-hour Business and Law exam and belongs to the individual, who may list it in a firm name and add sub-licensees; that is why this site maps it to the master level. A new applicant needs 4,000 hours of hands-on experience (up to half from technical education), pays $150 per examination, submits a nationwide criminal background report and Social Security verification, and after licensure pays an annual license fee of $150. The Board states that it has no license reciprocity with any state; the only technical-exam waiver is with South Carolina, and North Carolina residents licensed in Georgia, South Carolina, Tennessee, Virginia or West Virginia may ask for licensure without examination under the Neighbor State License Recognition Act. Commercial, industrial, transport and service refrigeration (not comfort cooling) requires a separate Class I-IV Refrigeration Contractor license from the State Board of Refrigeration Contractors ($100 exam, 4,000 hours, EPA 608 Type II or Universal required), which has no reciprocity but offers the same neighbor-state route to new NC residents. EPA Section 608 certification is required federally to handle refrigerants.

Moving to North CarolinaLeaving North Carolina

Compare: getting a North Carolina license from scratch

Why Indiana has nothing to transfer

Indiana master HVAC technician

Licensed by cities and counties

Verified September 15, 2026· 14 sources

Indiana has no statewide master HVAC, mechanical contractor or HVAC contractor license and no state HVAC board; the Indiana Professional Licensing Agency's list of regulated professions contains no heating, air conditioning or refrigeration trade, and Indianapolis's exam information states that licensing is at the discretion of each municipality. The master-level credential exists only locally and under varying names: Indianapolis/Marion County licenses Heating and Cooling Contractors (Air Conditioning A, B, D, Refrigeration and High Pressure Steam) whose craft license holder passed the Prov exam, Allen County (Fort Wayne) issues an HVAC Supervisors License (Air Conditioning A or B, Sheet Metal C), Evansville licenses Master Heating, Ventilating and Air Conditioner Installers and Master Refrigeration Installers by local examination, South Bend registers HVAC contractors on proof of a passing ICC National Standard Master Mechanical exam, and Terre Haute issues a Mechanical license to contractors employing a NATE, HVAC Excellence, RSES, Experior or Indianapolis-certified person. An out-of-state master HVAC or mechanical contractor license carries no state-level recognition in Indiana. Indianapolis is the only jurisdiction with a published reciprocity procedure, and it turns on the exam rather than the state: a license earned on a Prometric/Experior or Prov exam with a 70% score, certified by the issuing agency, can be accepted by the Board of Heating and Cooling Examiners. Elsewhere a master must apply in each city or county where they will pull permits, which in practice means holding an ICC or Prov national exam score or passing the local exam, then meeting that jurisdiction's bond and insurance rules. EPA Section 608 certification is required for refrigerant work in every jurisdiction.

How local licensing works in Indiana

How local licensing works. Indiana regulates plumbers at the state level but has never created a state HVAC or mechanical contractor license. Each city or county building department decides whether and how to license HVAC contractors and master-level installers, and there is no statewide portability rule. Prov (Indianapolis) and ICC/Prometric (South Bend, Terre Haute) national exams are the most portable credentials inside the state.

Indianapolis / Marion County. The Department of Business and Neighborhood Services licenses Heating and Cooling Contractors in five types: Air Conditioning A (unrestricted), Air Conditioning B (25 tons cooling / 500,000 BTU heating, boilers to 15 psig steam), Air Conditioning D (5 tons / 300,000 BTU), Refrigeration, and High Pressure Steam. A craft license holder submits an exam packet ten business days before the monthly Board of Heating and Cooling Examiners meeting: application, resume, employer letters verifying five years of HVACR experience (education may substitute in part), three industry reference letters, EPA certification card, driver's license; after a board interview the applicant sits the Prov exam and needs 70%. The business then files a $5,000 surety bond (obligee the Consolidated City of Indianapolis, expiring 12/31/2027), a $500,000/$100,000 (or $500,000 combined) liability certificate naming the City-County as additional insured, and workers' compensation proof. 2026 fees: new license holder $377 (Jan-Jun) or $283 (Jul-Dec), new business license $247 or $185 (none for sole proprietors), renewals $247 each; licenses expire December 31 of odd-numbered years. Reciprocity: the board may accept a comparable license from any municipality or government agency if the issuing agency certifies directly to the Department that the license is current and unsuspended, the license was issued on a standardized Prometric (formerly Thomson Prometric / Experior / Block) or Prov exam passed with at least 70%, and the vendor verifies the exam is equivalent to the Indianapolis exam; the applicant still documents five years of experience, three references and EPA certification, appears before the board, and then licenses with bond, insurance and fees.

Fort Wayne / Allen County. The Building Department's HVAC Supervisors License (Air Conditioning A without BTU limit, Air Conditioning B up to 500,000 BTU heating and 25 tons cooling, or Sheet Metal C) requires four years and 7,000 hours as a journeyman in the same line of work (or eight years and 14,000 hours of documented OJT plus 30 days as a licensed journeyman) and a passing examination administered by the Building Commissioner or an approved testing facility; hydronic and low-temperature refrigeration work is reserved to Non-Sanitary Piping licensees. The supervisor qualifies an HVAC Contractors Business Registration ($90; supervisor license $25). Section H grants reciprocity subject to the trade's guidelines and minimum qualifications, and allows the Building Commissioner to grant reciprocity at his discretion to applicants who present the necessary credentials.

Evansville. The Building Commission licenses Master Heating, Ventilating and Air Conditioner Installers (forced-air heating, air conditioning up to five tons with field piping or fifteen tons packaged, ventilation, ductwork and sheet metal; boilers and steam or hot-water systems require the Master Steam Fitter license) and Master Refrigeration Installers. Applicants prove four years of experience with three notarized letters on letterhead (EMC 5.70.060), are approved to test by the Board of Examiners of HVAC, Steam Fitters, and Refrigeration Installers, sit the exam through Ivy Tech and must score 75% on each part of the master mechanical, sheet metal, ventilation or refrigeration exam, then receive a provisional license on paying the $300 fee and providing insurance and the $25,000 surety bond required by EMC 5.70.070; renewal is $125 ($225 for two years) with board-set continuing education. The ordinance notes the master HVAC license does not permit air conditioning work without EPA certification.

South Bend. The Building Department registers HVAC contractors (including refrigeration and hood installers) after review of an application showing at least 21 years of age, journeyman and contractor experience (education may substitute for part of four years), and a passing score of at least 70% on the ICC National Standard Master Mechanical exam (F29-N) via Pearson Vue or Prometric or a comparable nationally recognized exam approved by the Board; a $5,000 surety bond naming the City of South Bend/St. Joseph County, workers' compensation proof, a $50 application review fee and $125 annual registration are required.

Terre Haute. The Engineering Department's Mechanical license is issued to a contractor that employs at least one full-time employee certified by NATE, HVAC Excellence, RSES, Experior Assessment, the City of Indianapolis HVAC Air Conditioning Class A, or an equivalent, with a $10,000 bond ($25,000 for right-of-way work), $500,000 general liability ($1,000,000 for right-of-way work) and workers' compensation or a WCE-1 exemption; $350 original registration, $175 annual renewal.

Out-of-state holders. Only Indianapolis publishes a reciprocity procedure, and it accepts a license from any jurisdiction (municipal or state) that was earned on an equivalent Prometric/Experior or Prov exam, subject to board approval. Allen County has a discretionary reciprocity clause; South Bend and Terre Haute accept national exam scores and industry certifications regardless of where they were earned; Evansville requires its own examination. Expect to license separately in each jurisdiction and to meet each one's bond and insurance rules.

Moving to IndianaLeaving Indiana

Common questions

Do I have to take the North Carolina master HVAC technician exam if I'm licensed in Indiana?
Yes. North Carolina requires the trade exam on this path, plus a law or code exam.
What does it cost to get a North Carolina master HVAC technician license from Indiana?
Published fees on this path total $300, not counting exam vendor fees or bonds.
Do my Indiana work hours count in North Carolina?
Yes. Documented out-of-state experience counts toward North Carolina's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 42 days.
Does it work the other way, from North Carolina to Indiana?
Not necessarily. Reciprocity is directed. Going from North Carolina to Indiana, the mechanism is not applicable.

Sources

  1. EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
  2. N.C.G.S. 87-21 - Definitions; contractors licensed by Board; examination; posting license · N.C.G.S. 87-21(a), (b), (g) · North Carolina General Assembly · Statute · verified September 23, 2026
  3. N.C.G.S. 87-58 - Refrigeration contractor license; classes; examination; reciprocity · N.C.G.S. 87-58 · North Carolina General Assembly · Statute · verified September 15, 2026
  4. NC State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors - Applicant Information · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
  5. Application Packet for Persons Applying for Plumbing, Heating or Fuel Piping Contractor License (Form PHFP-1, 2026-06) · G.S. 87-21(g) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Form · verified September 23, 2026
  6. Exam Information 2026 - exam durations · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
  7. License Definitions - Contractor (2026-06) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
  8. NC State Board of Refrigeration Contractors - General FAQ · North Carolina State Board of Refrigeration Contractors · Faq · verified September 15, 2026
  9. Application for Refrigeration Examination (revised July 26, 2025) · 21 NCAC 60 .0207; G.S. 87-64 · North Carolina State Board of Refrigeration Contractors · Form · verified September 15, 2026
  10. Licensure Requirements for New Residents pursuant to G.S. 93B-15.3(b) - NC State Board of Refrigeration Contractors · G.S. 93B-15.3(b); 21 NCAC 60 · North Carolina State Board of Refrigeration Contractors · Agency Page · verified September 15, 2026
  11. 21 NCAC Chapter 60 - Board of Refrigeration Contractors rules (periodic readoption) · 21 NCAC 60 .0207, .0209, .0211, .0213 · North Carolina Office of Administrative Hearings / NC State Board of Refrigeration Contractors · Admin Rule · verified September 15, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related