Minnesota to Alabama: master HVAC technician license reciprocity
Minnesota does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Examination with documented out-of-state experience (states without an agreement)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A contractor licensed in a state outside the Board's reciprocal list has no endorsement route: §34-31-29(d) recognizes only licenses covered by a reciprocity agreement, and rule 440-X-3-.04(2) limits reciprocity to 'a qualifying reciprocal state'. The applicant instead files the HVAC/Refrigeration Examination Application (EA-1 to EA-4) with the $175 exam fee and proves eligibility under §34-31-28(c) by 3,000 hours of work experience or graduation from an approved curriculum; experience is documented by notarized Affidavit of Employment forms (EA-4) from each supervising licensee, whose licensing state is recorded on the form, together with W-2 forms showing full-time employment, so hours earned under an out-of-state contractor are credited. After Board approval the candidate schedules the open-book Heating and Air Conditioning exam (115 questions, 5 hours) or Refrigeration exam (115 questions, 4 hours) with Prov and must score 70%. The successful candidate then applies for certification with forms AL-1, AL-2 and BF-1 ($220 active with a $20,000 performance bond in the business name, or $110 inactive) and, if the business entity was formed outside Alabama, registers it as a foreign corporation with the Secretary of State. Rule 440-X-3-.16 lets the Board waive the exam for military members, military spouses and transferred federal personnel who hold a current HVAC, refrigeration or mechanical license in another state.
Applicants must sit for the exam within one year of the application being received (§34-31-29(c)); applications not completed within twelve months may be treated as abandoned. The exam application also accepts certificates of 3,000 hours of HVAC or refrigeration educational training in lieu of work hours. Alabama's pages do not mention EPA Section 608 certification; it is listed here because it is a federal requirement for refrigerant handling.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 3,000 hours of qualifying work experience.3,000 hours of work experience as defined by the Board (the exam application asks for at least two years within the past five years under a licensed contractor, proven by notarized employer affidavits and W-2 forms), or graduation from an approved heating, air conditioning or refrigeration curriculum (§34-31-28(c)).
What you'll do to get licensed in Alabama
- 1Exam fee. Pay the exam fee ($175). Written examination fee per exam (HVAC or Refrigeration), paid to the State with the exam application; non-refundable (440-X-3-.10).
- 2Trade exam. Pass the destination's trade exam. Alabama Heating and Air Conditioning exam (115 questions, 5 hours) or Refrigeration exam (115 questions, 4 hours) administered by Prov; open book, 70% to pass.
- 3License fee. Pay the license or certificate fee ($220). Initial active certification fee (forms AL-1, AL-2, BF-1); annual renewal $220 by December 31; inactive status $110 with no bond.
- 4Surety bond. Post a surety bond ($20,000). Performance bond of $20,000 in the business name naming the Board as obligee (form BF-1), required for active certification (440-X-3-.04(5)).
- 5Other. Notarized Affidavit of Employment (EA-4) from each supervising licensee with corresponding W-2 forms, or transcripts/certificates for an approved curriculum; proof of citizenship or lawful presence.
- 6Business license. Obtain a business license (if applicable). Foreign corporation registration with the Alabama Secretary of State ($150) if the business entity was formed outside Alabama.
- 7Continuing education. Complete continuing education. Four hours of Board-approved continuing education every calendar year to renew (exempt during the first year of certification) (§34-31-26(d)).
- 8Other. EPA Section 608 technician certification (Type I/II/III/Universal) to handle refrigerants; federal, does not expire.
Published fees on this path total $395, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Exam fee · $175
- Trade exam
- Other
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $20,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Alabama licenses master HVAC technicians
Alabama master HVAC technician · “Certified Heating and Air Conditioning Contractor (or Certified Refrigeration Contractor)”
Statewide license
Issued by Alabama Board of Heating, Air Conditioning & Refrigeration Contractors
Alabama's HVAC credential is the Certified Heating and Air Conditioning Contractor certification (with a parallel Certified Refrigeration Contractor certification for commercial refrigeration) issued by the Board of Heating, Air Conditioning & Refrigeration Contractors. It is treated here as the master level because it is earned personally by examination: under rule 440-X-3-.04 an individual must satisfy every requirement, and when a partnership, corporation or LLC is certified the certificate is issued in the name of the person in responsible charge together with the business name. A new applicant must show 3,000 hours of work experience (the exam application asks for notarized employer affidavits covering at least two years within the past five years, with W-2 forms) or graduation from an approved HVAC or refrigeration curriculum, then pass the open-book Prov exam ($175; 115 questions, 70% to pass). Active certification costs $220 per year and requires a business name and a $20,000 performance bond; inactive status is $110 with no bond; four hours of continuing education are required each year after the first, and renewal is due by December 31. The Board accepts licenses by reciprocity from Mississippi, Tennessee, Ohio, South Carolina (Residential Building Commission or Contractor's Board), Texas, West Virginia and Louisiana when the applicant passed an equivalent exam with at least 70%; there is no business and law exam, and §34-31-28(d) prohibits counties and municipalities from requiring further local testing of certified contractors.
Why Minnesota has nothing to transfer
Minnesota master HVAC technician
Licensed by cities and counties
Minnesota issues no master HVAC, master refrigeration or HVAC contractor license. The only statewide requirement is the $25,000 mechanical contractor bond that a business files with the Department of Labor and Industry (DLI) under Minn. Stat. 326B.197 ($100 filing fee, valid two years) before contracting for gas, heating, ventilation, cooling, air conditioning, fuel burning or refrigeration work; DLI states that there is no state license for mechanical contractors or their employees and that cities may require licensure or a competency card. The master-level credential therefore exists only at the city level: Minneapolis issues Master Warm Air Ventilation and Master Refrigeration Certificates of Competency (four years of experience and education plus an ICC exam) and requires a master card holder behind each HVAC Class A or Refrigeration Systems Installer contractor license; Saint Paul issues Master Warm Air, Ventilation and Refrigeration competency cards and requires one for each Warm Air/Ventilation business trade license; Rochester licenses individual HVAC Master Installers after a city certificate of competency; Bloomington licenses mechanical contractors on a Minneapolis or Saint Paul card or its own test. An out-of-state master HVAC or mechanical contractor license has no state-level recognition and none of these cities publish a path that accepts it; Minneapolis and Saint Paul recognize each other's master cards. Federal EPA Section 608 certification is separately required of anyone handling refrigerants.
How local licensing works in Minnesota
How local licensing works. Minnesota has no state mechanical or HVAC license and no state HVAC board. Under Minn. Stat. 326B.197 a business contracting for gas, heating, ventilation, cooling, air conditioning, fuel burning or refrigeration work files a $25,000 bond with DLI ($100 biennial filing fee); the bond is 'in lieu of all other bonds to any political subdivision' but does not replace city licenses, and DLI tells contractors they 'must comply with local licensing requirements'. Whether an individual must hold a master-level card depends on the city.
Minneapolis. Contractor licenses (HVAC Class A for installing, repairing or cleaning HVAC systems, HVAC Class B for cleaning only, Refrigeration Systems Installer, Gas Fitter) are issued by Business Licenses and Consumer Services and require the State of Minnesota $25,000 bond; the responsible person holds a Master Certificate of Competency under Minneapolis Code Chapter 278. Master Warm Air Ventilation and Master Refrigeration cards require four years (1,600 hours per year) of on-the-job experience and four years (576 hours) of trade-related education, eligibility approval by the Building Official (no fee), the ICC exam at Pearson VUE (80 questions, 75% to pass, $115; the refrigeration master exam is open book with a 3-hour limit) and a $30 card fee per trade. A Saint Paul card is accepted by reciprocity for $30 per trade. The city's contractor license fee is published on a fee page that could not be opened during verification.
Saint Paul. A Warm Air or Ventilation Business Trade License ($188 per year, expiring December 1) requires a current Saint Paul Master Warm Air and/or Ventilation Certificate of Competency or a current Minneapolis master card, the $25,000 DLI mechanical bond, a $500,000 certificate of insurance naming the city and workers' compensation proof; Refrigeration, Gas Burner, Oil Burner and Steam Fitting licenses follow the same pattern. Master competency exams for Warm Air/Ventilation are given in January and July; reciprocal master cards are issued on a current Minneapolis card for $24 per trade.
Rochester. An HVAC Contractor license ($125 per year) requires a full-time licensed HVAC Master Installer; the Master Installer license ($60 per year) is issued to the individual after a City of Rochester certificate of competency ($25 per area of competency).
Bloomington. Mechanical contractor licenses (HVAC, gas installer, hot water/steam, oil burner, refrigeration) require a Minneapolis or Saint Paul Certificate of Competency or passing Bloomington's $35 open-book mechanical test on the 2020 Minnesota Mechanical and Fuel Gas Code, plus the DLI bond and a Minnesota tax ID.
Duluth. No city mechanical license; permits are issued to DLI-bonded mechanical contractors.
Out-of-state holders. No Minnesota city reviewed here publishes reciprocity or endorsement for another state's master HVAC or mechanical contractor license. A master arriving from another state can contract statewide by filing the DLI bond, and in Minneapolis, Saint Paul or Rochester must additionally document four years of experience and education and pass that city's master exam (a Minneapolis card then reciprocates to Saint Paul and is accepted in Bloomington).
Common questions
- Do I have to take the Alabama master HVAC technician exam if I'm licensed in Minnesota?
- Yes. Alabama requires the trade exam on this path.
- What does it cost to get a Alabama master HVAC technician license from Minnesota?
- Published fees on this path total $395, not counting exam vendor fees or bonds.
- Do my Minnesota work hours count in Alabama?
- Yes. Documented out-of-state experience counts toward Alabama's eligibility requirements.
- Does it work the other way, from Alabama to Minnesota?
- Not necessarily. Reciprocity is directed. Going from Alabama to Minnesota, the mechanism is not applicable.
Sources
- Alabama HACR Board - HVAC/Refrigeration Examination Application (forms EA-1 to EA-7) with approved curricula and exam references · Alabama Board of Heating, Air Conditioning & Refrigeration Contractors · Form · verified September 15, 2026Eligibility proof: notarized employer affidavits (EA-4) that the applicant worked in heating and air conditioning and/or commercial refrigeration for at least two years within the past five years with W-2 forms, and/or certificates of at least 3,000 hours of HVAC or refrigeration training, or graduation from an approved curriculum (Alabama, Georgia, Florida and other southeastern programs are listed). The EA-4 affidavit has a 'Licensing State' field for the supervising licensee, so out-of-state supervised experience is accepted. Exam fee $175 per exam ($350 for both); open-book exams referencing the 2021 IRC/IMC, ACCA Manuals D and J, the 2020 NEC, the Board's 2024 law book and the NASCLA business-law guide. The form still quotes an older version of §34-31-28 that allowed eligibility by two years of Board apprentice registration.
- Alabama Board of Heating, Air Conditioning & Refrigeration Contractors - How to Get Licensed (examination, licensure, reciprocity) · Alabama Board of Heating, Air Conditioning & Refrigeration Contractors · Agency Page · verified September 15, 2026Defines the two certifications (Heating & Air Conditioning Contractor; Refrigeration Contractor); examination fee $175; active certification $220 per year with a business name and a $20,000 performance bond, inactive $110 per year with no bond. Step 3 lists the reciprocal boards: Mississippi State Board of Contractors, Tennessee Board for Licensing Contractors, Ohio Construction Industry Licensing Board, South Carolina Residential Building Commission, South Carolina Contractor's Board, Texas Department of Licensing & Regulation, West Virginia Contractor Licensing Board and Louisiana State Licensing Board for Contractors; the applicant must have passed an equivalent exam with a score of at least 70% and hold a current and valid license; reciprocal applications cannot be filed online; reciprocity processing fee $220; $20,000 performance bond in the business name; foreign corporation registration with the Secretary of State. No business and law exam is mentioned.
- Code of Alabama 1975, §34-31-18 et seq. and Alabama Administrative Code Chapters 440-X-1 to 440-X-4 (Board compilation, October 17, 2024) · Ala. Code §§ 34-31-18, 34-31-24, 34-31-25, 34-31-26, 34-31-28, 34-31-29, 34-31-30; Ala. Admin. Code 440-X-3-.04, 440-X-3-.10, 440-X-3-.16 · Alabama Board of Heating, Air Conditioning & Refrigeration Contractors · Statute · verified September 15, 2026§34-31-18 defines Certified Heating and Air Conditioning Contractor and Certified Refrigeration Contractor ('any person engaged in the business of ...'), 'responsible charge' and 'regularly employed person'. §34-31-24(a): no person may advertise, bid, obtain permits or perform the function of a certified contractor unless the person in responsible charge is a certified contractor. §34-31-28(c): eligibility to sit for the exam requires 3,000 hours of work experience as defined by the Board or graduation from an approved curriculum; (d) counties and municipalities are prohibited from requiring further local testing of certified contractors. §34-31-29(d): the Board may enter into reciprocity agreements with other states; the provision recognizes the contractor as having passed the exam but all certification fees must be paid. §34-31-30: performance bond up to $25,000. §34-31-26: annual renewal by December 31, inactive status at half fee, four hours of continuing education per year (first year exempt). Rule 440-X-3-.04(2): certification by reciprocity requires a current and valid license in a qualifying reciprocal state with no previous or pending disciplinary action; (5) all new applicants must provide a $20,000 performance bond; (6) an entity is certified through its person in responsible charge and the certificate is issued in that person's name with the business name. Rule 440-X-3-.10 (effective October 14, 2024): written exam $175, practical exam $375, active certification and renewal $220, inactive $110, late fee $250. Rule 440-X-3-.16: exam waiver for military members, spouses and federal personnel holding an HVAC, refrigeration or mechanical license in another state. No rule lists the reciprocal states or waiting periods; no journeyman, technician or apprentice license appears anywhere in the chapter.
- Alabama HACR Board - New License Application (licensure by examination and by reciprocity) · Alabama Board of Heating, Air Conditioning & Refrigeration Contractors · Agency Page · verified September 15, 2026Older page still published alongside 'How to Get Licensed'. Examination route: Board-issued Apprentice Certificate for the previous two years, graduation from an approved curriculum, or 3,000 hours (18 months) of work experience under supervision of a HACR licensee proven by W-2 forms and employer affidavit. Reciprocity route: 'current and valid HVAC license with the South Carolina Residential Builders Commission for at least 5 years; Tennessee Board for Licensing Contractors for at least 3 years; Mississippi Board of Contractors for at least 1 year; Louisiana or West Virginia where there are no waiting periods'; forms AL-1, AL-2, VL-1, VL-2, BF-1. Its fees ($150 exam, $190/$95 certification, $15,000 bond) are superseded by rule 440-X-3-.10 effective October 14, 2024 and by the current page.
- State of Alabama HACR Contractor Board Examinations - Candidate Information Bulletin (Prov, July 3, 2025) · Prov, Inc. (testing vendor contracted by the Alabama HACR Board) · Other · verified September 15, 2026The Board 'has contracted with Prov, Inc. to develop, and administer their licensing examination program'; exams are (HAC) Heating and Air Conditioning (115 questions, 5 hours) and Refrigeration (115 questions, 4 hours), open book, passing score 70%; the exam fee is paid to the State and Prov charges nothing; the Board approves the candidate before scheduling.
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026Federal requirement in every state: technicians who maintain, service, repair or dispose of equipment that could release refrigerants into the atmosphere must be certified (Type I small appliances, Type II high-pressure, Type III low-pressure, Universal). Apprentices under direct supervision are exempt. Certification does not expire; the core exam must be proctored for Universal certification. State HVAC boards commonly require it before licensure, but it is not itself a state license.
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.