Minnesota to Oklahoma: master HVAC technician license reciprocity
Minnesota does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Oklahoma's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state master HVAC or mechanical contractor (all states; no published reciprocity partners)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
No state has a published mechanical contractor reciprocity agreement with Oklahoma, so every out-of-state master HVAC technician or mechanical contractor uses the same route. Under OAC 158:50-9-4.1 an applicant from a state without a reciprocal agreement may request exam equivalency; if the Board has previously approved that jurisdiction's exam, the technical trade portion of the Oklahoma contractor exam is waived on a certified letter showing current good standing, the license category, a 70%+ exam score and no pending discipline, but the Mechanical Business and Law portion must still be passed. CIB does not publish the approved jurisdictions. Otherwise the applicant files the Application for Mechanical Examination with notarized experience affidavits and a copy of the out-of-state license, documents four years of verifiable experience in the category, pays $330, and must pass both portions of the contractor exam through PSI within three years of approval. To activate the license the contractor files a $5,000 bond and $50,000 general liability insurance with CIB; a contractor employed by a single business or public entity may instead file that employer's affidavit. Federal EPA Section 608 certification is required separately to handle refrigerants.
Even where a written contractor reciprocity agreement exists, OAC 158:50-9-6(e) grants only a journeyman license by reciprocity and requires the Oklahoma Business and Law portion before the contractor license issues; since no mechanical agreement is published, no agreement rows are recorded. Some third-party sites claim contractor reciprocity with Texas, Arkansas, Kansas or New Mexico, but no CIB page lists such an agreement.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 8,000 hours of qualifying work experience.Journeyman requirement of three years plus one additional year of verifiable experience in the mechanical trade, at 2,000 hours per year (OAC 158:50-9-1(b)(2)).
- Your Minnesota license must be active and in good standing.
- You must have passed a licensing exam in Minnesota that the destination considers comparable.
What you'll do to get licensed in Oklahoma
- 1Application fee. Pay the application fee ($30). Contractor application fee, non-refundable (OAC 158:50-9-2(b)).
- 2License fee. Pay the license or certificate fee ($300). Initial contractor license fee, submitted with the application; annual renewal $200.
- 3Trade exam. Pass the destination's trade exam. Technical trade portion of the Oklahoma HVACR Contractor exam (Unlimited or Limited) administered by PSI, 70% to pass; waived only under approved exam equivalency.
- 4Law / code exam. Pass a law, rules, or code exam. Oklahoma Mechanical Business and Law portion of the contractor exam (PSI), 70% to pass; never waived, including for reciprocity applicants.
- 5Exam fee. Pay the exam fee ($184). PSI fee of $92 per examination portion (two portions), non-refundable.
- 6Surety bond. Post a surety bond ($5,000). Continuous $5,000 corporate surety bond payable to the Oklahoma Construction Industries Board, filed before the license is activated (OAC 158:50-5-3(a)).
- 7Insurance. Carry the required insurance ($50,000). Commercial general liability insurance of at least $50,000 with CIB named as certificate holder (OAC 158:50-5-3(b)).
- 8Other. Compliance with workers' compensation insurance laws; the licensed contractor must be a permanent employee, owner, partner or officer of the mechanical firm responsible for its work.
- 9Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).
Published fees on this path total $514, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Law / code exam
- Exam fee · $184
- Other · if applicable
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $5,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $50,000
How Oklahoma licenses master HVAC technicians
Oklahoma master HVAC technician · “Mechanical Contractor (HVAC/R Unlimited or Limited)”
Statewide license
Issued by Oklahoma Construction Industries Board (CIB), Mechanical Division
Oklahoma has no 'master HVAC' license; its highest person-held HVAC credential is the Mechanical Contractor license, which CIB issues to an individual who passes the two-part contractor exam (technical trade and Mechanical Business and Law, 70% each, $92 per portion). This site maps the HVAC/R Unlimited (or Limited) Mechanical Contractor license to the master level. An applicant needs the journeyman qualifications plus one additional year, so four years (8,000 hours) of verifiable experience in the category, and pays $330 ($30 application plus $300 initial license). After passing, an inactive license issues until the contractor files a $5,000 corporate surety bond and a $50,000 commercial general liability certificate with CIB; an inactive contractor may work as a journeyman. Every mechanical firm must have a licensed contractor associated with and responsible for its work. OAC 158:50-9-6 lets CIB sign contractor reciprocity agreements, under which the applicant would still have to pass the Business and Law portion, but CIB publishes no mechanical partner states. Licenses renew annually ($200) with six hours of continuing education every 36 months.
Why Minnesota has nothing to transfer
Minnesota master HVAC technician
Licensed by cities and counties
Minnesota issues no master HVAC, master refrigeration or HVAC contractor license. The only statewide requirement is the $25,000 mechanical contractor bond that a business files with the Department of Labor and Industry (DLI) under Minn. Stat. 326B.197 ($100 filing fee, valid two years) before contracting for gas, heating, ventilation, cooling, air conditioning, fuel burning or refrigeration work; DLI states that there is no state license for mechanical contractors or their employees and that cities may require licensure or a competency card. The master-level credential therefore exists only at the city level: Minneapolis issues Master Warm Air Ventilation and Master Refrigeration Certificates of Competency (four years of experience and education plus an ICC exam) and requires a master card holder behind each HVAC Class A or Refrigeration Systems Installer contractor license; Saint Paul issues Master Warm Air, Ventilation and Refrigeration competency cards and requires one for each Warm Air/Ventilation business trade license; Rochester licenses individual HVAC Master Installers after a city certificate of competency; Bloomington licenses mechanical contractors on a Minneapolis or Saint Paul card or its own test. An out-of-state master HVAC or mechanical contractor license has no state-level recognition and none of these cities publish a path that accepts it; Minneapolis and Saint Paul recognize each other's master cards. Federal EPA Section 608 certification is separately required of anyone handling refrigerants.
How local licensing works in Minnesota
How local licensing works. Minnesota has no state mechanical or HVAC license and no state HVAC board. Under Minn. Stat. 326B.197 a business contracting for gas, heating, ventilation, cooling, air conditioning, fuel burning or refrigeration work files a $25,000 bond with DLI ($100 biennial filing fee); the bond is 'in lieu of all other bonds to any political subdivision' but does not replace city licenses, and DLI tells contractors they 'must comply with local licensing requirements'. Whether an individual must hold a master-level card depends on the city.
Minneapolis. Contractor licenses (HVAC Class A for installing, repairing or cleaning HVAC systems, HVAC Class B for cleaning only, Refrigeration Systems Installer, Gas Fitter) are issued by Business Licenses and Consumer Services and require the State of Minnesota $25,000 bond; the responsible person holds a Master Certificate of Competency under Minneapolis Code Chapter 278. Master Warm Air Ventilation and Master Refrigeration cards require four years (1,600 hours per year) of on-the-job experience and four years (576 hours) of trade-related education, eligibility approval by the Building Official (no fee), the ICC exam at Pearson VUE (80 questions, 75% to pass, $115; the refrigeration master exam is open book with a 3-hour limit) and a $30 card fee per trade. A Saint Paul card is accepted by reciprocity for $30 per trade. Master competency exams for Warm Air/Ventilation are given in January and July; reciprocal master cards are issued on a current Minneapolis card for $24 per trade.
Rochester. An HVAC Contractor license ($125 per year) requires a full-time licensed HVAC Master Installer; the Master Installer license ($60 per year) is issued to the individual after a City of Rochester certificate of competency ($25 per area of competency).
Bloomington. Mechanical contractor licenses (HVAC, gas installer, hot water/steam, oil burner, refrigeration) require a Minneapolis or Saint Paul Certificate of Competency or passing Bloomington's $35 open-book mechanical test on the 2020 Minnesota Mechanical and Fuel Gas Code, plus the DLI bond and a Minnesota tax ID.
Duluth. No city mechanical license; permits are issued to DLI-bonded mechanical contractors.
Out-of-state holders. No Minnesota city reviewed here publishes reciprocity or endorsement for another state's master HVAC or mechanical contractor license. A master arriving from another state can contract statewide by filing the DLI bond, and in Minneapolis, Saint Paul or Rochester must additionally document four years of experience and education and pass that city's master exam (a Minneapolis card then reciprocates to Saint Paul and is accepted in Bloomington).
Common questions
- Do I have to take the Oklahoma master HVAC technician exam if I'm licensed in Minnesota?
- Yes. Oklahoma requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Oklahoma master HVAC technician license from Minnesota?
- Published fees on this path total $514, not counting exam vendor fees or bonds.
- Do my Minnesota work hours count in Oklahoma?
- Yes. Documented out-of-state experience counts toward Oklahoma's eligibility requirements.
- Does it work the other way, from Oklahoma to Minnesota?
- Not necessarily. Reciprocity is directed. Going from Oklahoma to Minnesota, the mechanism is not applicable.
Sources
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
- Oklahoma CIB - Active Contractor Requirements (bond and insurance) · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
- Oklahoma CIB - Mechanical Industry · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
- Oklahoma CIB - Mechanical Application Information and Application for Mechanical Examination · Oklahoma Construction Industries Board · Form · verified September 23, 2026
- Oklahoma CIB - Mechanical Contractor · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
- Oklahoma CIB - Mechanical Forms · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
- Oklahoma Mechanical Licensing Act, 59 O.S. §§ 1850.1 et seq. · 59 O.S. §§ 1850.6, 1850.7, 1850.8, 1850.8A · Oklahoma Construction Industries Board · Statute · verified September 23, 2026
- OAC Title 158, Chapter 50 - Mechanical Industry Regulations (permanent rules effective 10/1/2020) · OAC 158:50-5-2, 158:50-5-3, 158:50-9-1, 158:50-9-2, 158:50-9-4.1, 158:50-9-6, 158:50-9-7 · Oklahoma Construction Industries Board · Admin Rule · verified September 23, 2026
- State of Oklahoma Electrical, Mechanical, Roofing and Plumbing Examinations Candidate Information Bulletin (PSI) · PSI Services for the Oklahoma Construction Industries Board · Form · verified September 23, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.