Missouri to Idaho: master HVAC technician license reciprocity
Missouri does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Idaho's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Universal licensure for out-of-state HVAC contractors (all states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
With no reciprocity agreements, every out-of-state HVAC contractor or master is treated the same. Idaho Code 67-9409 obliges the HVAC board to license a person who holds a current, valid and unrestricted license in another state and demonstrates competency, on the standard application, fees and background checks, but lets the board require all or part of its examination; the board's rules require every contractor applicant to pass the board-designated exam and post a $2,000 bond, and DOPL publishes no HVAC-specific endorsement procedure. The realistic path is therefore the standard contractor application ($35), the PSI contractor exam ($75), the $2,000 compliance bond and the $225 license fee, with the out-of-state license and experience submitted as supporting evidence of competency.
Idaho Code 54-5013 sets a 24-month certificate term while DOPL's fee table shows a 3-year term for journeyman and contractor licenses; the fee table is the current practice. The board's published materials do not say whether any part of the exam is waived under 67-9409. The contractor application also requires an individual applicant to hold an active Idaho HVAC Journeyman license, or a business applicant to employ at least one, and the PSI contractor exam covers only the Contractor's Business and Law Reference Manual.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
What you must already have
- Your Missouri license must be active and in good standing.
What you'll do to get licensed in Idaho
- 1Application fee. Pay the application fee ($35). HVAC Contractor application processing fee (non-refundable).
- 2Trade exam. Pass the destination's trade exam. Idaho HVAC Contractor examination administered by PSI (board-designated exam, IDAPA 24.39.70.100.03).
- 3Exam fee. Pay the exam fee ($75). PSI examination fee.
- 4Surety bond. Post a surety bond ($2,000). HVAC contractor compliance bond of $2,000 (or an acceptable corporate industry group bond), effective for the certificate period.
- 5License fee. Pay the license or certificate fee ($225). Contractor license fee (3-year term; renewal $150, reinstatement $225).
- 6Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).
Published fees on this path total $335, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee · $75
- Other · if applicable
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $2,000
How Idaho licenses master HVAC technicians
Idaho master HVAC technician · “HVAC Contractor”
Statewide license
Idaho has no master HVAC title; its highest credential is the HVAC Contractor certificate of competency, which is issued as a card in the name of the individual who passes the board's contractor examination and is therefore mapped here to the master level (an HVAC business must hold or employ a certificate holder, and Specialty Contractor and Limited Heating Specialty Contractor certificates cover gas piping, hearth appliances and oil furnaces). An individual applicant must already hold an active Idaho HVAC Journeyman license, or a business applying as an entity must employ at least one Idaho-licensed HVAC journeyman. The applicant pays a $35 application fee, passes the PSI-administered HVAC contractor exam ($75, using the DOPL Contractors' Business and Law Reference Manual as a reference), provides a $2,000 compliance bond, and pays the $225 license fee; the certificate renews for $150 every three years. Idaho's HVAC board states that it has no reciprocal licensing agreement. A contractor licensed in another state may apply under Idaho's universal licensure statute (Idaho Code 67-9409), which requires the board to license a person with a current, unrestricted out-of-state license who demonstrates competency, but allows it to require the Idaho exam; since DOPL publishes no separate procedure for HVAC, applicants should expect to take the contractor exam. EPA Section 608 certification is required nationwide to handle refrigerants.
Why Missouri has nothing to transfer
Missouri master HVAC technician
Licensed by cities and counties
Missouri does not issue a master HVAC license or a statewide mechanical contractor license; the Division of Professional Registration licenses no HVAC or mechanical profession, and unlike the electrical trade there is no voluntary statewide contractor license for HVAC. The master-level credential exists only at the local level under names that vary by jurisdiction: Springfield certifies Master Mechanical craftsmen (4 years as a certified journeyman or 10 years of experience, ICC exam, $50), Kansas City issues a mechanical certificate of qualification to the supervisor who qualifies a licensed mechanical contractor (Prometric or ICC exam, $60 application, $181 four-year renewal), and St. Louis County and the City of St. Louis license mechanical contractors through their boards of examiners. An out-of-state master HVAC license carries no state-level recognition in Missouri, and none of these jurisdictions publish a reciprocity path for it; Springfield accepts an identical ICC, Prometric, Experior or Block exam score in place of retesting and Kansas City may accept a comparable exam it deems equivalent. A master arriving from another state should expect to qualify in each jurisdiction separately and then obtain that jurisdiction's mechanical contractor license to pull permits. EPA Section 608 certification is a separate federal requirement.
How local licensing works in Missouri
How local licensing works. Missouri has no state HVAC license and no statute standardizing local HVAC licensing; each city or county sets its own master, supervisor and contractor requirements.
Springfield. Building Development Services certifies Master Mechanical craftsmen: 4 years as a certified journeyman in the trade or 10 years of satisfactory experience, documented on notarized employer forms and approved by the Building and Trades board; ICC master mechanical exam through Pearson Vue (about $125), 75% to pass; certification card $50 with $50 annual renewal. 'Reciprocation' applicants submit copies of their other-state licenses and an identical-exam score of 75% or better from Prometric, Experior, Block or ICC; otherwise they test.
Kansas City. City Planning and Development licenses mechanical contractors ($55 application, $181 issuance, $181 renewal every four years) whose scope covers heating, duct and ventilation systems, refrigeration maintenance, gas piping to burners and control wiring. Every licensed contractor must employ a full-time supervisor who holds a Kansas City certificate of qualification in the mechanical trade; the certificate requires an application with notarized references and a passing score from a recognized agency such as Prometric or ICC ($60 application, first four-year certificate free, $181 renewal), and the city may accept a comparable exam from another jurisdiction if it deems it equivalent or superior.
St. Louis County. The Board of Examiners for Mechanical Licensing certifies mechanical contractors (a certified contractor list is published) and requires a licensed mechanical contractor bond and, for some applicants, a financial responsibility bond; applications and renewals go through the Accela portal. Master-level exam and experience details are not published on the pages that could be opened.
City of St. Louis. The Mechanical Contractors Board of Examiners (Ordinance 62579, City Code 25.10) reviews each applicant's qualifications for a Mechanical Contractor's license issued by the Building Division; the license is required to pull mechanical permits for boilers, furnaces, exhaust systems and ventilation. Contractors also need the city's graduated business license.
Out-of-state holders. No reciprocity or endorsement path for another state's master HVAC license was found in any of these jurisdictions. The practical route is to present an identical ICC or Prometric master mechanical score where accepted (Springfield; Kansas City case by case), document experience, and apply for the local master certificate and contractor license in each jurisdiction where work will be performed.
Common questions
- Do I have to take the Idaho master HVAC technician exam if I'm licensed in Missouri?
- Yes. Idaho requires the trade exam on this path.
- What does it cost to get a Idaho master HVAC technician license from Missouri?
- Published fees on this path total $335, not counting exam vendor fees or bonds.
- Do my Missouri work hours count in Idaho?
- Yes. Documented out-of-state experience counts toward Idaho's eligibility requirements.
- Does it work the other way, from Idaho to Missouri?
- Not necessarily. Reciprocity is directed. Going from Idaho to Missouri, the mechanism is not applicable.
Sources
- EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
- Idaho Code 54-5007 - Requirements for Certificates of Competency · Idaho Code § 54-5007 · Idaho State Legislature · Statute · verified September 23, 2026
- Idaho Code 54-5009 - Classification of Competency (HVAC apprentice, journeyman, contractor, specialty contractor) · Idaho Code § 54-5009 · Idaho State Legislature · Statute · verified September 15, 2026
- Idaho Code 54-5011 - Issuance of Certificate of Competency · Idaho Code § 54-5011 · Idaho State Legislature · Statute · verified September 23, 2026
- Idaho Code sec. 67-9409 - Occupational Licensing Reform Act: universal licensure · Idaho Code secs. 67-9403, 67-9409, 67-9414 · Idaho State Legislature · Statute · verified September 17, 2026
- Idaho DOPL - Heating, Ventilation and Air Conditioning Board (program home and fees) · Idaho Division of Occupational and Professional Licenses · Agency Page · verified September 23, 2026
- Idaho DOPL - HVAC Board FAQs · Idaho Division of Occupational and Professional Licenses · Faq · verified September 23, 2026
- Idaho DOPL - HVAC Program Information and Exams · Idaho Division of Occupational and Professional Licenses · Agency Page · verified September 23, 2026
- IDAPA 24.39.70 - Rules Governing Installation of Heating, Ventilation, and Air Conditioning Systems · IDAPA 24.39.70.100 · Idaho Division of Occupational and Professional Licenses · Admin Rule · verified September 23, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.