LicensebyState

New York to North Carolina: master HVAC technician license reciprocity

No credit· Start overVerified September 15, 2026· 11 sources

New York does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state master HVAC or HVAC contractor without a waiver (all other states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

The Board's 2026 application packet states that there is no license reciprocity, that all applicants must meet the North Carolina experience requirements, and that 'there are currently no other waivers available for any other states or any other licenses' beyond South Carolina. G.S. 87-21(g) lets the Board license contractors from other states without written examination after 'a complete and exhaustive review' finding the other state's requirements substantially equivalent, but the Board has exercised that authority only for South Carolina. A master HVAC technician or HVAC contractor from any other state therefore applies to sit the examination: 4,000 hours of hands-on experience in the heating group sought (up to half from college or technical-institute coursework), which may have been earned anywhere and is documented on the Applicant Employment History form (1-C) with W-2s or 1099s when it was not earned under a North Carolina licensee. The $150 exam fee, a Disahealthcare criminal background report and Form SSA-89 are submitted with the application; after approval (4-6 weeks) the candidate schedules the 4-hour technical exam and 1.5-hour Business and Law exam with PSI. An applicant who passes the technical portion but fails the business portion may take a Heating Technician license instead. A North Carolina resident licensed in Georgia, Tennessee, Virginia or West Virginia may instead use the Neighbor State License Recognition Act (see agreements).

Separate application and fee for each heating classification. An H3-I licensee gets 50% experience credit toward H2 and vice versa.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 42 days

What you must already have

  • You must document at least 4,000 hours of qualifying work experience.Hands-on installation, maintenance, service or repair of the heating group sought; up to 50% may be college or technical-institute coursework (66.66 hours per approved semester hour).

What you'll do to get licensed in North Carolina

  1. 1Exam fee. Pay the exam fee ($150). Examination fee per classification, non-refundable (Form PHFP-1, 2026-06).
  2. 2Trade exam. Pass the destination's trade exam. Heating Group 1, 2 or 3 Contractor technical examination administered by PSI: 4.0 hours, open book on the NC State Building Code volumes listed on the Board's Book Reference List.
  3. 3Law / code exam. Pass a law, rules, or code exam. North Carolina Business and Law examination: 1.5 hours, based on the Board's Laws & Rules book (G.S. 87 Art. 2 and 21 NCAC 50) and the NC Business and Project Management for Contractors book.
  4. 4License fee. Pay the license or certificate fee ($150). Annual license fee as printed in the Board's 2026 application packet.
  5. 5Background check. Complete a background check. Nationwide criminal background report ordered by the applicant from Disahealthcare/CastleBranch (package ST46); applicant pays the vendor.
  6. 6Other. Form SSA-89 Social Security Number verification, notarized experience verification forms with W-2s/1099s, and the current NC State Building Code, Laws & Rules and Business and Project Management books.
  7. 7Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).

Published fees on this path total $300, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Exam fee · $150
  • Trade exam
  • Law / code exam
  • Other · if applicable

How North Carolina licenses master HVAC technicians

North Carolina master HVAC technician · “Heating Contractor (H1-I / H1-II, H2, H3-I / H3-II)”

Statewide license

Verified September 15, 2026· 11 sources

Issued by North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors

North Carolina has no 'master HVAC' license; its highest HVAC credential is the Heating Contractor license issued to an individual by the State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors under G.S. 87-21, in Heating Group 1 (steam, vapor and hot-water comfort heating), Group 2 (forced-air heating/cooling with more than 15 tons of cooling) and Group 3 (forced-air heating/cooling of 15 tons or less), each with Class I (any building) and Class II (single-family detached dwellings) except Group 2, which is Class I only. The license is earned personally by passing the 4-hour technical exam and the 1.5-hour Business and Law exam and belongs to the individual, who may list it in a firm name and add sub-licensees; that is why this site maps it to the master level. A new applicant needs 4,000 hours of hands-on experience (up to half from technical education), pays $150 per examination, submits a nationwide criminal background report and Social Security verification, and after licensure pays an annual license fee of $150. The Board states that it has no license reciprocity with any state; the only technical-exam waiver is with South Carolina, and North Carolina residents licensed in Georgia, South Carolina, Tennessee, Virginia or West Virginia may ask for licensure without examination under the Neighbor State License Recognition Act. Commercial, industrial, transport and service refrigeration (not comfort cooling) requires a separate Class I-IV Refrigeration Contractor license from the State Board of Refrigeration Contractors ($100 exam, 4,000 hours, EPA 608 Type II or Universal required), which has no reciprocity but offers the same neighbor-state route to new NC residents. EPA Section 608 certification is required federally to handle refrigerants.

Moving to North CarolinaLeaving North Carolina

Compare: getting a North Carolina license from scratch

Why New York has nothing to transfer

New York master HVAC technician

Licensed by cities and counties

Verified September 15, 2026· 22 sources

New York issues no statewide master HVAC, mechanical or HVAC contractor license; the Department of State licenses none of the construction trades, so the master-level credential exists only where a city or county has created one, and most have not. The only examined, person-holdable HVAC license in the state is Buffalo's Heating Contractor license from the Board of Heating Examiners (age 21, two years of heating installation experience, a quarterly written exam, a $10,000 bond, $1,000,000 liability insurance, $50 exam fee and $500 a year), which covers heating and process systems but not air-conditioning-only work. New York City has no HVAC or mechanical contractor license at all (the DOB licenses oil burner installers and the FDNY certifies refrigerating system operating engineers, but installation and service of HVAC systems needs no license), and the suburban counties regulate the trade through home improvement contractor licensing of the business: Westchester has required 'all HVAC professionals' to hold its home improvement license since July 1, 2025 ($750 application, no exam), Nassau's home improvement license ($650 for two years plus $50, five years of experience, no exam) covers central heating and air-conditioning work, and Suffolk's ($200 application and $200 a year, $500,000 insurance, no exam) covers HVAC ductwork. An out-of-state master HVAC license has no state-level recognition and none of these jurisdictions publishes reciprocity for it; a contractor from another state obtains the local business license (or, in Buffalo, sits the heating contractor exam) in each jurisdiction where they will work.

How local licensing works in New York

How local licensing works. With no state HVAC board, each jurisdiction that regulates the trade does so under its own code, usually as a business license with insurance and experience requirements rather than a trade exam. Buffalo is the exception with an examined heating contractor license.

New York City. The Department of Buildings issues no HVAC, mechanical or refrigeration contractor license; mechanical work is done under permits without a trade license, and the general contractor registration ($300 for three years) applies only to builders of one- to three-family homes. Oil-fired equipment must be installed by a DOB-licensed Oil Burner Equipment Installer (Class A or B; written exam $585, practical exam $530, $100 license for three years), and any refrigerating system that needs an FDNY permit must be supervised by a holder of the FDNY Q-01 Refrigerating System Operating Engineer Certificate of Qualification (EPA Universal certification, a 200-hour course or one year of qualifying experience or a boiler engineer, marine engineer or PE license; $60 plus $225 exam fees; three-year renewal $15). Neither recognizes out-of-state HVAC licenses.

Buffalo. City Code Chapter 238 makes it unlawful for any person to install, erect, alter, repair, service, reset or replace any heating or process system without a license from the Board of Heating Examiners; the separate City contractor license 'does not allow for plumbing, heating, cooling or electrical work'. Applicants must be at least 21 and have two years of practical experience installing heating equipment, a recognized school course plus one year, or be a graduate engineer; they submit photo ID, employer letters and a list of twenty completed installations to the Office of Fuel Devices, and if approved sit the Heating Contractor's Examination (offered roughly every three months, covering local ordinances and ASHRAE material). Classes: I (oil, gas or solid fuel), II (gas or solid fuel), III (wood-burning fireplaces and stoves). Fees: $50 non-refundable testing fee, $500 license, $500 annual renewal; a $10,000 bond to the City and certificates of $1,000,000 general liability and workers' compensation insurance are required. The license may be held by an individual, partnership or corporation. No reciprocity provision.

Rochester. Licenses stationary engineers and refrigeration operators (plant operation), electricians and plumbers; no HVAC contractor license.

Westchester County. The June 2025 amendment to the Consumer Protection Code requires 'all HVAC professionals' to be licensed through the Department of Consumer Protection as of July 1, 2025; the vehicle is the county Home Improvement Contractor license ($750 application fee effective January 1, 2026, $100 optional expedite, roughly 60 business days of document verification and background investigation, no exam). The county's examined trade licenses cover only plumbers and electricians.

Nassau County. Contractors installing or replacing 'central heating or air conditioning systems' in residential property need the county Home Improvement license: five years of recent verifiable experience, an establishment in New York State, liability, property damage and workers' compensation insurance, $650 for a two-year license plus a one-time $50 restitution fund contribution, $110 late renewal fee; no exam.

Suffolk County. Home improvement contracting expressly includes 'ductwork for heating, ventilation and air-conditioning systems'; the county Home Improvement license requires public liability and property damage insurance of at least $500,000 per occurrence and workers' compensation, a $200 application fee and $200 annual license fee ($50 temporary 90-day license); employees of licensed contractors are exempt; no exam.

Out-of-state holders. No New York jurisdiction publishes a reciprocity or endorsement path for out-of-state HVAC contractor or master licenses. Buffalo requires its own exam; the counties require their own business license regardless of any license held elsewhere; New York City requires no HVAC license at all.

Moving to New YorkLeaving New York

Common questions

Do I have to take the North Carolina master HVAC technician exam if I'm licensed in New York?
Yes. North Carolina requires the trade exam on this path, plus a law or code exam.
What does it cost to get a North Carolina master HVAC technician license from New York?
Published fees on this path total $300, not counting exam vendor fees or bonds.
Do my New York work hours count in North Carolina?
Yes. Documented out-of-state experience counts toward North Carolina's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 42 days.
Does it work the other way, from North Carolina to New York?
Not necessarily. Reciprocity is directed. Going from North Carolina to New York, the mechanism is not applicable.

Sources

  1. EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
  2. N.C.G.S. 87-21 - Definitions; contractors licensed by Board; examination; posting license · N.C.G.S. 87-21(a), (b), (g) · North Carolina General Assembly · Statute · verified September 23, 2026
  3. N.C.G.S. 87-58 - Refrigeration contractor license; classes; examination; reciprocity · N.C.G.S. 87-58 · North Carolina General Assembly · Statute · verified September 15, 2026
  4. NC State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors - Applicant Information · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
  5. Application Packet for Persons Applying for Plumbing, Heating or Fuel Piping Contractor License (Form PHFP-1, 2026-06) · G.S. 87-21(g) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Form · verified September 23, 2026
  6. Exam Information 2026 - exam durations · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
  7. License Definitions - Contractor (2026-06) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 23, 2026
  8. NC State Board of Refrigeration Contractors - General FAQ · North Carolina State Board of Refrigeration Contractors · Faq · verified September 15, 2026
  9. Application for Refrigeration Examination (revised July 26, 2025) · 21 NCAC 60 .0207; G.S. 87-64 · North Carolina State Board of Refrigeration Contractors · Form · verified September 15, 2026
  10. Licensure Requirements for New Residents pursuant to G.S. 93B-15.3(b) - NC State Board of Refrigeration Contractors · G.S. 93B-15.3(b); 21 NCAC 60 · North Carolina State Board of Refrigeration Contractors · Agency Page · verified September 15, 2026
  11. 21 NCAC Chapter 60 - Board of Refrigeration Contractors rules (periodic readoption) · 21 NCAC 60 .0207, .0209, .0211, .0213 · North Carolina Office of Administrative Hearings / NC State Board of Refrigeration Contractors · Admin Rule · verified September 15, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related