LicensebyState

New York to Oklahoma: master HVAC technician license reciprocity

No credit· Start overVerified September 15, 2026· 9 sources

New York does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Oklahoma's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state master HVAC or mechanical contractor (all states; no published reciprocity partners)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

No state has a published mechanical contractor reciprocity agreement with Oklahoma, so every out-of-state master HVAC technician or mechanical contractor uses the same route. Under OAC 158:50-9-4.1 an applicant from a state without a reciprocal agreement may request exam equivalency; if the Board has previously approved that jurisdiction's exam, the technical trade portion of the Oklahoma contractor exam is waived on a certified letter showing current good standing, the license category, a 70%+ exam score and no pending discipline, but the Mechanical Business and Law portion must still be passed. CIB does not publish the approved jurisdictions. Otherwise the applicant files the Application for Mechanical Examination with notarized experience affidavits and a copy of the out-of-state license, documents four years of verifiable experience in the category, pays $330, and must pass both portions of the contractor exam through PSI within three years of approval. To activate the license the contractor files a $5,000 bond and $50,000 general liability insurance with CIB; a contractor employed by a single business or public entity may instead file that employer's affidavit. Federal EPA Section 608 certification is required separately to handle refrigerants.

Even where a written contractor reciprocity agreement exists, OAC 158:50-9-6(e) grants only a journeyman license by reciprocity and requires the Oklahoma Business and Law portion before the contractor license issues; since no mechanical agreement is published, no agreement rows are recorded. Some third-party sites claim contractor reciprocity with Texas, Arkansas, Kansas or New Mexico, but no CIB page lists such an agreement.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must document at least 8,000 hours of qualifying work experience.Journeyman requirement of three years plus one additional year of verifiable experience in the mechanical trade, at 2,000 hours per year (OAC 158:50-9-1(b)(2)).
  • Your New York license must be active and in good standing.
  • You must have passed a licensing exam in New York that the destination considers comparable.

What you'll do to get licensed in Oklahoma

  1. 1Application fee. Pay the application fee ($30). Contractor application fee, non-refundable (OAC 158:50-9-2(b)).
  2. 2License fee. Pay the license or certificate fee ($300). Initial contractor license fee, submitted with the application; annual renewal $200.
  3. 3Trade exam. Pass the destination's trade exam. Technical trade portion of the Oklahoma HVACR Contractor exam (Unlimited or Limited) administered by PSI, 70% to pass; waived only under approved exam equivalency.
  4. 4Law / code exam. Pass a law, rules, or code exam. Oklahoma Mechanical Business and Law portion of the contractor exam (PSI), 70% to pass; never waived, including for reciprocity applicants.
  5. 5Exam fee. Pay the exam fee ($184). PSI fee of $92 per examination portion (two portions), non-refundable.
  6. 6Surety bond. Post a surety bond ($5,000). Continuous $5,000 corporate surety bond payable to the Oklahoma Construction Industries Board, filed before the license is activated (OAC 158:50-5-3(a)).
  7. 7Insurance. Carry the required insurance ($50,000). Commercial general liability insurance of at least $50,000 with CIB named as certificate holder (OAC 158:50-5-3(b)).
  8. 8Other. Compliance with workers' compensation insurance laws; the licensed contractor must be a permanent employee, owner, partner or officer of the mechanical firm responsible for its work.
  9. 9Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).

Published fees on this path total $514, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Law / code exam
  • Exam fee · $184
  • Other · if applicable

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $5,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · $50,000

How Oklahoma licenses master HVAC technicians

Oklahoma master HVAC technician · “Mechanical Contractor (HVAC/R Unlimited or Limited)”

Statewide license

Verified September 15, 2026· 6 sources

Issued by Oklahoma Construction Industries Board (CIB), Mechanical Division

Oklahoma has no 'master HVAC' license; its highest person-held HVAC credential is the Mechanical Contractor license, which CIB issues to an individual who passes the two-part contractor exam (technical trade and Mechanical Business and Law, 70% each, $92 per portion). This site maps the HVAC/R Unlimited (or Limited) Mechanical Contractor license to the master level. An applicant needs the journeyman qualifications plus one additional year, so four years (8,000 hours) of verifiable experience in the category, and pays $330 ($30 application plus $300 initial license). After passing, an inactive license issues until the contractor files a $5,000 corporate surety bond and a $50,000 commercial general liability certificate with CIB; an inactive contractor may work as a journeyman. Every mechanical firm must have a licensed contractor associated with and responsible for its work. OAC 158:50-9-6 lets CIB sign contractor reciprocity agreements, under which the applicant would still have to pass the Business and Law portion, but CIB publishes no mechanical partner states. Licenses renew annually ($200) with six hours of continuing education every 36 months.

Moving to OklahomaLeaving Oklahoma

Compare: getting a Oklahoma license from scratch

Why New York has nothing to transfer

New York master HVAC technician

Licensed by cities and counties

Verified September 15, 2026· 22 sources

New York issues no statewide master HVAC, mechanical or HVAC contractor license; the Department of State licenses none of the construction trades, so the master-level credential exists only where a city or county has created one, and most have not. The only examined, person-holdable HVAC license in the state is Buffalo's Heating Contractor license from the Board of Heating Examiners (age 21, two years of heating installation experience, a quarterly written exam, a $10,000 bond, $1,000,000 liability insurance, $50 exam fee and $500 a year), which covers heating and process systems but not air-conditioning-only work. New York City has no HVAC or mechanical contractor license at all (the DOB licenses oil burner installers and the FDNY certifies refrigerating system operating engineers, but installation and service of HVAC systems needs no license), and the suburban counties regulate the trade through home improvement contractor licensing of the business: Westchester has required 'all HVAC professionals' to hold its home improvement license since July 1, 2025 ($750 application, no exam), Nassau's home improvement license ($650 for two years plus $50, five years of experience, no exam) covers central heating and air-conditioning work, and Suffolk's ($200 application and $200 a year, $500,000 insurance, no exam) covers HVAC ductwork. An out-of-state master HVAC license has no state-level recognition and none of these jurisdictions publishes reciprocity for it; a contractor from another state obtains the local business license (or, in Buffalo, sits the heating contractor exam) in each jurisdiction where they will work.

How local licensing works in New York

How local licensing works. With no state HVAC board, each jurisdiction that regulates the trade does so under its own code, usually as a business license with insurance and experience requirements rather than a trade exam. Buffalo is the exception with an examined heating contractor license.

New York City. The Department of Buildings issues no HVAC, mechanical or refrigeration contractor license; mechanical work is done under permits without a trade license, and the general contractor registration ($300 for three years) applies only to builders of one- to three-family homes. Oil-fired equipment must be installed by a DOB-licensed Oil Burner Equipment Installer (Class A or B; written exam $585, practical exam $530, $100 license for three years), and any refrigerating system that needs an FDNY permit must be supervised by a holder of the FDNY Q-01 Refrigerating System Operating Engineer Certificate of Qualification (EPA Universal certification, a 200-hour course or one year of qualifying experience or a boiler engineer, marine engineer or PE license; $60 plus $225 exam fees; three-year renewal $15). Neither recognizes out-of-state HVAC licenses.

Buffalo. City Code Chapter 238 makes it unlawful for any person to install, erect, alter, repair, service, reset or replace any heating or process system without a license from the Board of Heating Examiners; the separate City contractor license 'does not allow for plumbing, heating, cooling or electrical work'. Applicants must be at least 21 and have two years of practical experience installing heating equipment, a recognized school course plus one year, or be a graduate engineer; they submit photo ID, employer letters and a list of twenty completed installations to the Office of Fuel Devices, and if approved sit the Heating Contractor's Examination (offered roughly every three months, covering local ordinances and ASHRAE material). Classes: I (oil, gas or solid fuel), II (gas or solid fuel), III (wood-burning fireplaces and stoves). Fees: $50 non-refundable testing fee, $500 license, $500 annual renewal; a $10,000 bond to the City and certificates of $1,000,000 general liability and workers' compensation insurance are required. The license may be held by an individual, partnership or corporation. No reciprocity provision.

Rochester. Licenses stationary engineers and refrigeration operators (plant operation), electricians and plumbers; no HVAC contractor license.

Westchester County. The June 2025 amendment to the Consumer Protection Code requires 'all HVAC professionals' to be licensed through the Department of Consumer Protection as of July 1, 2025; the vehicle is the county Home Improvement Contractor license ($750 application fee effective January 1, 2026, $100 optional expedite, roughly 60 business days of document verification and background investigation, no exam). The county's examined trade licenses cover only plumbers and electricians.

Nassau County. Contractors installing or replacing 'central heating or air conditioning systems' in residential property need the county Home Improvement license: five years of recent verifiable experience, an establishment in New York State, liability, property damage and workers' compensation insurance, $650 for a two-year license plus a one-time $50 restitution fund contribution, $110 late renewal fee; no exam.

Suffolk County. Home improvement contracting expressly includes 'ductwork for heating, ventilation and air-conditioning systems'; the county Home Improvement license requires public liability and property damage insurance of at least $500,000 per occurrence and workers' compensation, a $200 application fee and $200 annual license fee ($50 temporary 90-day license); employees of licensed contractors are exempt; no exam.

Out-of-state holders. No New York jurisdiction publishes a reciprocity or endorsement path for out-of-state HVAC contractor or master licenses. Buffalo requires its own exam; the counties require their own business license regardless of any license held elsewhere; New York City requires no HVAC license at all.

Moving to New YorkLeaving New York

Common questions

Do I have to take the Oklahoma master HVAC technician exam if I'm licensed in New York?
Yes. Oklahoma requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Oklahoma master HVAC technician license from New York?
Published fees on this path total $514, not counting exam vendor fees or bonds.
Do my New York work hours count in Oklahoma?
Yes. Documented out-of-state experience counts toward Oklahoma's eligibility requirements.
Does it work the other way, from Oklahoma to New York?
Not necessarily. Reciprocity is directed. Going from Oklahoma to New York, the mechanism is not applicable.

Sources

  1. EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
  2. Oklahoma CIB - Active Contractor Requirements (bond and insurance) · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
  3. Oklahoma CIB - Mechanical Industry · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
  4. Oklahoma CIB - Mechanical Application Information and Application for Mechanical Examination · Oklahoma Construction Industries Board · Form · verified September 23, 2026
  5. Oklahoma CIB - Mechanical Contractor · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
  6. Oklahoma CIB - Mechanical Forms · Oklahoma Construction Industries Board · Agency Page · verified September 23, 2026
  7. Oklahoma Mechanical Licensing Act, 59 O.S. §§ 1850.1 et seq. · 59 O.S. §§ 1850.6, 1850.7, 1850.8, 1850.8A · Oklahoma Construction Industries Board · Statute · verified September 23, 2026
  8. OAC Title 158, Chapter 50 - Mechanical Industry Regulations (permanent rules effective 10/1/2020) · OAC 158:50-5-2, 158:50-5-3, 158:50-9-1, 158:50-9-2, 158:50-9-4.1, 158:50-9-6, 158:50-9-7 · Oklahoma Construction Industries Board · Admin Rule · verified September 23, 2026
  9. State of Oklahoma Electrical, Mechanical, Roofing and Plumbing Examinations Candidate Information Bulletin (PSI) · PSI Services for the Oklahoma Construction Industries Board · Form · verified September 23, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related