LicensebyState

New York to South Carolina: master HVAC technician license reciprocity

No credit· Start overVerified September 23, 2026· 9 sources

New York does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is South Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Licensure by examination with credit for out-of-state experience (states without a waiver agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A contractor from a state (or classification) not on the Board's waiver list is told plainly: 'you are not eligible for waiver/reciprocity. You will be required to take the SC exams.' The applicant passes the South Carolina technical exam for each classification wanted (Air Conditioning, Heating, Refrigeration or Packaged Equipment) through PSI and the South Carolina Business Management & Law for Commercial Contractors exam, then files the Qualifying Party application (Doc. 168) with proof of at least 2 years of full-time work experience performed within the past 5 years in each classification, which may have been earned in any state and should primarily reflect commercial work (a PHCC Academy of North Carolina heating and air-conditioning apprenticeship certificate is an alternative). The business files the Mechanical Contractor license application with the $350 licensure fee and a financial statement (or surety bond) meeting the group limit it wants. Section 40-11-290 separately allows the Board to exempt the technical exam for an applicant who verifies passing an essentially identical exam in another state even without a reciprocal agreement, but the Board's published waiver list and instructions do not describe a process for invoking it outside the listed states. A licensee who only wants residential work can instead apply to the Residential Builders Commission for the Residential HVAC Installer and Repairer license (one year of residential HVAC experience within the past five, residential technical exam at 65% and Business Management and Law exam, $135 application and $220 license fees, $10,000 bond for work over $5,000).

PSI charges $60 for the Air Conditioning and Packaged Equipment exams, $75 for the Heating and Refrigeration exams and $75 for the Business Management and Law exam, per attempt, paid to PSI when you register. The Board lists no separate qualifying-party certification fee beyond the $350 license fee. Mechanical Contractor group limits run from Group 1 (jobs to $35,000) to Group 5 (unlimited); Group 2 (jobs to $100,000) needs $10,000 working capital or $15,000 net worth, or a $15,000 bond. EPA Section 608 certification is not mentioned on the Board's pages but is required by federal law.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • At least 2 years of full-time work experience in each classification applied for, performed within the past 5 years, documented on Work Experience Affidavits (Doc. 167); out-of-state experience is accepted

What you'll do to get licensed in South Carolina

  1. 1Trade exam. Pass the destination's trade exam. South Carolina Air Conditioning, Heating, Refrigeration and/or Packaged Equipment technical examination(s) through PSI, one per classification.
  2. 2Law / code exam. Pass a law, rules, or code exam. South Carolina Business Management & Law for Commercial Contractors examination (PSI), required of all applicants.
  3. 3Exam fee. Pay the exam fee. PSI examination fees paid directly to PSI at registration, per attempt: $60 Air Conditioning or Packaged Equipment, $75 Heating or Refrigeration, $75 Business Management and Law.
  4. 4License fee. Pay the license or certificate fee ($350). Mechanical Contractor licensure fee (license issued to the entity the qualifying party certifies).
  5. 5Financial responsibility. Show financial responsibility. Financial statement dated within 12 months showing working capital of $10,000 or net worth of $15,000 for Mechanical Group 2 (higher groups require more), or a surety bond in lieu.
  6. 6Surety bond. Post a surety bond ($15,000) (if applicable). Surety bond accepted in lieu of the financial statement for Mechanical Group 2 (larger bonds for higher groups).
  7. 7Other. Qualifying Party initial application (Doc. 168) with exam score sheets, Work Experience Affidavits, ID, Social Security card and notarized Verification of Lawful Presence.
  8. 8Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).

Published fees on this path total $350, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Law / code exam
  • Exam fee
  • Other · if applicable

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $15,000 · if applicable

How South Carolina licenses master HVAC technicians

South Carolina master HVAC technician · “Mechanical Contractor, Air Conditioning (AC) / Heating (HT) / Refrigeration (RG) classification - Qualifying Party certification”

Statewide license

Verified September 23, 2026· 7 sources

Issued by South Carolina Contractor's Licensing Board (LLR); Residential Builders Commission for residential-only work

South Carolina has no 'master HVAC' license. The highest person-held HVAC credential is the Contractor's Licensing Board's Qualifying Party certification in the Air Conditioning (AC), Heating (HT), Refrigeration (RG) or Packaged Equipment (PK, up to 25 tons and 500,000 BTU per unit) classification of the Mechanical Contractor license: the individual passes the South Carolina technical exam for each classification through PSI and the South Carolina Business Management & Law for Commercial Contractors exam, documents two years of experience within the past five (or a PHCC Academy of North Carolina heating and air-conditioning apprenticeship), and is certified as the qualifying party for a licensed entity (which may be a sole proprietorship); the certification stays with the person, who 'is not a licensed contractor' alone. The license itself is issued to the business, with a $350 licensure fee and a financial statement or surety bond sized by license group (Mechanical Group 2, jobs to $100,000: working capital $10,000 or net worth $15,000, or a $15,000 bond). A residential-only alternative is the Residential Builders Commission's Residential HVAC Installer and Repairer license ($135 application, $220 license), issued to the individual after one year of residential HVAC experience and the residential technical plus Business Management and Law exams. South Carolina has technical-exam waiver agreements, listed in the Board's Technical Exam Waiver Agreement List (revised May 2026), covering HVAC classifications for Alabama (Heating and Air Conditioning, Refrigeration), Georgia (Unrestricted Conditioned Air), Louisiana (Statewide Mechanical), North Carolina (Heating Groups 1, 2 and 3), Ohio (HVAC, packaged equipment only), Tennessee (CMC and CMC-C), Texas (Class A and Class B air conditioning and refrigeration) and Utah (HVAC, warm air heating, refrigerated air conditioning and refrigeration exams passed before May 2017), plus the MASC/CAGC HARV Master Mechanical card. Alabama, Mississippi and North Carolina licenses obtained by exam and held for a year also waive the technical exam for the residential license. Every waiver applicant must still pass the South Carolina Business Management & Law exam. Licensees from other states take the South Carolina technical exam. EPA Section 608 certification is a separate federal requirement.

Moving to South CarolinaLeaving South Carolina

Compare: getting a South Carolina license from scratch

Why New York has nothing to transfer

New York master HVAC technician

Licensed by cities and counties

Verified September 15, 2026· 22 sources

New York issues no statewide master HVAC, mechanical or HVAC contractor license; the Department of State licenses none of the construction trades, so the master-level credential exists only where a city or county has created one, and most have not. The only examined, person-holdable HVAC license in the state is Buffalo's Heating Contractor license from the Board of Heating Examiners (age 21, two years of heating installation experience, a quarterly written exam, a $10,000 bond, $1,000,000 liability insurance, $50 exam fee and $500 a year), which covers heating and process systems but not air-conditioning-only work. New York City has no HVAC or mechanical contractor license at all (the DOB licenses oil burner installers and the FDNY certifies refrigerating system operating engineers, but installation and service of HVAC systems needs no license), and the suburban counties regulate the trade through home improvement contractor licensing of the business: Westchester has required 'all HVAC professionals' to hold its home improvement license since July 1, 2025 ($750 application, no exam), Nassau's home improvement license ($650 for two years plus $50, five years of experience, no exam) covers central heating and air-conditioning work, and Suffolk's ($200 application and $200 a year, $500,000 insurance, no exam) covers HVAC ductwork. An out-of-state master HVAC license has no state-level recognition and none of these jurisdictions publishes reciprocity for it; a contractor from another state obtains the local business license (or, in Buffalo, sits the heating contractor exam) in each jurisdiction where they will work.

How local licensing works in New York

How local licensing works. With no state HVAC board, each jurisdiction that regulates the trade does so under its own code, usually as a business license with insurance and experience requirements rather than a trade exam. Buffalo is the exception with an examined heating contractor license.

New York City. The Department of Buildings issues no HVAC, mechanical or refrigeration contractor license; mechanical work is done under permits without a trade license, and the general contractor registration ($300 for three years) applies only to builders of one- to three-family homes. Oil-fired equipment must be installed by a DOB-licensed Oil Burner Equipment Installer (Class A or B; written exam $585, practical exam $530, $100 license for three years), and any refrigerating system that needs an FDNY permit must be supervised by a holder of the FDNY Q-01 Refrigerating System Operating Engineer Certificate of Qualification (EPA Universal certification, a 200-hour course or one year of qualifying experience or a boiler engineer, marine engineer or PE license; $60 plus $225 exam fees; three-year renewal $15). Neither recognizes out-of-state HVAC licenses.

Buffalo. City Code Chapter 238 makes it unlawful for any person to install, erect, alter, repair, service, reset or replace any heating or process system without a license from the Board of Heating Examiners; the separate City contractor license 'does not allow for plumbing, heating, cooling or electrical work'. Applicants must be at least 21 and have two years of practical experience installing heating equipment, a recognized school course plus one year, or be a graduate engineer; they submit photo ID, employer letters and a list of twenty completed installations to the Office of Fuel Devices, and if approved sit the Heating Contractor's Examination (offered roughly every three months, covering local ordinances and ASHRAE material). Classes: I (oil, gas or solid fuel), II (gas or solid fuel), III (wood-burning fireplaces and stoves). Fees: $50 non-refundable testing fee, $500 license, $500 annual renewal; a $10,000 bond to the City and certificates of $1,000,000 general liability and workers' compensation insurance are required. The license may be held by an individual, partnership or corporation. No reciprocity provision.

Rochester. Licenses stationary engineers and refrigeration operators (plant operation), electricians and plumbers; no HVAC contractor license.

Westchester County. The June 2025 amendment to the Consumer Protection Code requires 'all HVAC professionals' to be licensed through the Department of Consumer Protection as of July 1, 2025; the vehicle is the county Home Improvement Contractor license ($750 application fee effective January 1, 2026, $100 optional expedite, roughly 60 business days of document verification and background investigation, no exam). The county's examined trade licenses cover only plumbers and electricians.

Nassau County. Contractors installing or replacing 'central heating or air conditioning systems' in residential property need the county Home Improvement license: five years of recent verifiable experience, an establishment in New York State, liability, property damage and workers' compensation insurance, $650 for a two-year license plus a one-time $50 restitution fund contribution, $110 late renewal fee; no exam.

Suffolk County. Home improvement contracting expressly includes 'ductwork for heating, ventilation and air-conditioning systems'; the county Home Improvement license requires public liability and property damage insurance of at least $500,000 per occurrence and workers' compensation, a $200 application fee and $200 annual license fee ($50 temporary 90-day license); employees of licensed contractors are exempt; no exam.

Out-of-state holders. No New York jurisdiction publishes a reciprocity or endorsement path for out-of-state HVAC contractor or master licenses. Buffalo requires its own exam; the counties require their own business license regardless of any license held elsewhere; New York City requires no HVAC license at all.

Moving to New YorkLeaving New York

Common questions

Do I have to take the South Carolina master HVAC technician exam if I'm licensed in New York?
Yes. South Carolina requires the trade exam on this path, plus a law or code exam.
What does it cost to get a South Carolina master HVAC technician license from New York?
Published fees on this path total $350, not counting exam vendor fees or bonds.
Do my New York work hours count in South Carolina?
Yes. Documented out-of-state experience counts toward South Carolina's eligibility requirements.
Does it work the other way, from South Carolina to New York?
Not necessarily. Reciprocity is directed. Going from South Carolina to New York, the mechanism is not applicable.

Sources

  1. EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
  2. S.C. Code of Laws Title 40, Chapter 11 - Contractors · S.C. Code Ann. Sections 40-11-30, 40-11-230, 40-11-260, 40-11-262, 40-11-290, 40-11-410 · South Carolina Legislature · Statute · verified September 23, 2026
  3. General and Mechanical Contractors - Primary Qualifying Party (PQP) and Qualifying Party (QP) Initial Application (Doc. 168, 12/19/2025 v2.1) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 23, 2026
  4. SC Contractor’s Licensing Board - Licensure with the Board (application, qualifying parties, exams, group limits, financial statements, bonds) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 23, 2026
  5. SC Contractor’s Licensing Board - Technical Exam Waiver Agreements (as of May 2026, Revised 5/2026) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agreement Document · verified September 17, 2026
  6. SC Contractor's Licensing Board - Technical Exam Waiver Agreements (as of May 2026) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agreement Document · verified September 23, 2026
  7. SC Residential Builders Commission - Residential HVAC Installer and Repairer License · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 15, 2026
  8. Residential HVAC Installer and Repairer License Application - Requirements and Instructions (Rev. 01/2026 v1.5) · S.C. Code Ann. § 40-59-250 (credit report) · South Carolina Residential Builders Commission (LLR) · Form · verified September 15, 2026
  9. PSI - South Carolina Contractor’s Licensing Board Commercial Contractors Candidate Information Bulletin · PSI Services LLC for the SC Contractor’s Licensing Board · Form · verified September 23, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related