LicensebyState

North Dakota to Iowa: master HVAC technician license reciprocity

No credit· Start overVerified September 15, 2026· 14 sources

North Dakota does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is Iowa's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state master or HVAC contractor (all states): direct admission to the Iowa master exam

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Iowa has no master-level HVAC reciprocity with any state. An applicant who was previously licensed as a master in the applicable discipline in another state or local jurisdiction is admitted to the Iowa master HVAC/refrigeration exam without having to hold an Iowa journeyperson license first (Iowa Code 105.18(2)(c); 481 IAC 429.6(3)(i)); the applicant files the $35 exam approval application, pays Kirkwood's exam fee ($119 per attempt), passes with 75%, and then files the post-examination licensure application with a prorated three-year fee ($240 for a full term). An applicant who has established Iowa residency may instead apply for licensure by verification under Iowa Code 272C.12 and 481 IAC 430.4, but the board still requires proof of passing the applicable Iowa licensing examination and can issue only a temporary license until then. To contract independently the master (or the firm employing the master) must also obtain the Contractor license and DIAL contractor registration ($250 plus $150 for a full term, 30% discount when bought with the master license in one transaction), with $500,000 liability insurance, a $5,000 surety bond, and for out-of-state contractors a $25,000 bond under chapter 91C; the board's reciprocity form states there is no reciprocity for contractor licenses.

Contractor license fees, insurance and bond are listed as optional requirements because they apply only to a master who contracts independently. The exam fee is the amount Kirkwood Community College currently charges for every Iowa plumbing and mechanical exam; DIAL's own pages still show older figures. DIAL says to allow up to two weeks for an exam approval application to be processed.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Count toward eligibility

What you must already have

  • Previously licensed as a master in the applicable discipline in another state or local jurisdiction, or a licensed journeyperson with at least two years of journey-level experience in the discipline (Iowa Code 105.18(2)(c); 481 IAC 429.6(3)(i))
  • Your North Dakota license must be active and in good standing.
  • You must have no disciplinary action or unresolved complaints on your record.For licensure by verification: no revocation, surrender under investigation, unresolved discipline or pending complaint (272C.12(1)(e)-(g); 481 IAC 430.4(3)).
  • Licensure by verification requires established Iowa residency or a military spouse's permanent change of station to Iowa (272C.12(1)(b); 481 IAC 430.4(2)(d))

What you'll do to get licensed in Iowa

  1. 1Application fee. Pay the application fee ($35). Examination approval application fee, per discipline (481 IAC 428.1(4)).
  2. 2Trade exam. Pass the destination's trade exam. Iowa Master HVAC/Refrigeration examination administered through Kirkwood Community College; 75% to pass; also required of licensure-by-verification applicants under 481 IAC 430.4(2)(e).
  3. 3Exam fee. Pay the exam fee ($119). Kirkwood Community College examination fee, per attempt, non-refundable.
  4. 4License fee. Pay the license or certificate fee ($240). Master license fee for a full three-year term (July 1, 2026 to June 30, 2029), prorated one-sixth per six-month period; same amount for a license by verification.
  5. 5Application fee. Pay the application fee ($25) (if applicable). Paper application fee if not filed through the online portal.
  6. 6Contractor license. Hold or obtain a contractor license ($400) (if applicable). PMSB Contractor license ($250) plus DIAL contractor registration ($150) for a full three-year term, prorated; required only to contract independently; 30% discount on license fees when bought with the master license in one transaction.
  7. 7Insurance. Carry the required insurance ($500,000) (if applicable). Public liability insurance of at least $500,000 for a contractor license (Iowa Code 105.19).
  8. 8Surety bond. Post a surety bond ($5,000) (if applicable). Surety bond of at least $5,000 for a contractor license; out-of-state contractors must also file a $25,000 bond under Iowa Code chapter 91C.
  9. 9Other. Hold EPA Section 608 technician certification to handle refrigerant; federal law requires it, but it is not a condition of this state license (if applicable).

Published fees on this path total $394, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Exam fee · $119
  • Other · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Contractor license · $400 · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · $500,000 · if applicable

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $5,000 · if applicable

How Iowa licenses master HVAC technicians

Iowa master HVAC technician · “Master HVAC-Refrigeration”

Statewide license

Verified September 15, 2026· 7 sources

Issued by Iowa Plumbing and Mechanical Systems Board, Department of Inspections, Appeals, and Licensing (DIAL)

Iowa's highest person-held HVAC credential is the Master HVAC-Refrigeration license issued by the Plumbing and Mechanical Systems Board (DIAL); a Master Mechanical license, which adds sheet metal and hydronic work, is issued to anyone who passes both the master HVAC-refrigeration and master hydronic exams. A new master applicant must have previously been a licensed journeyperson in the discipline with at least two years of journey-level experience, or have been licensed as a master in the discipline in another state or local jurisdiction, and must pass the Iowa master exam (75%) through Kirkwood Community College. The separate Contractor license is a business credential: a sole proprietor or firm that contracts for HVAC work must hold or employ a master in each discipline, carry $500,000 liability insurance and a $5,000 surety bond (out-of-state contractors add a $25,000 chapter 91C bond), and register as a contractor with DIAL on the same application. Iowa has no HVAC reciprocity agreement with any state and states plainly that there is no reciprocity for contractor licenses. An out-of-state master may sit the Iowa master exam directly on the strength of the out-of-state license; Iowa residents may use licensure by verification but the board still requires the Iowa exam. Licenses run three years and require eight hours of continuing education per term.

Moving to IowaLeaving Iowa

Compare: getting a Iowa license from scratch

Why North Dakota has nothing to transfer

North Dakota master HVAC technician

Licensed by cities and counties

Verified September 15, 2026· 16 sources

North Dakota issues no master HVAC, mechanical or refrigeration license and has no state mechanical board. The only state-level credential an HVAC contractor needs is the Secretary of State contractor license, a business license for any job over $4,000 (Class D up to $100,000 for $100, up to Class A over $500,000 for $450) that requires liability insurance and workers' compensation verification but no trade exam. The master-level credential is the city master HVAC/mechanical installer license: Fargo's Master Heating license (10,000 hours including 6,000 as a journeyman, exam, $125 per year, liability insurance naming the city), Bismarck's Class A Master HVAC Installer (3,400 hours as a licensed journeyman, exam with 80% to pass, $125 per year), Grand Forks' Master Mechanical Installer (exam with 80%, $170 per year, $5,000 city bond, state contractor license) and Minot's Master Heating/HVAC Installer (board exam, $130 per year). A master exam passed in one of the testing member cities is accepted by the other North Dakota licensing members through the state mechanical reciprocity program, but each city issues its own license. No city recognizes an out-of-state master or contractor license outright; Bismarck's ordinance counts journeyman experience licensed by any governmental jurisdiction toward master exam eligibility, so an out-of-state master generally qualifies to sit a city master exam on the strength of documented experience and then licenses city by city. EPA Section 608 certification applies federally.

How local licensing works in North Dakota

How local licensing works. North Dakota has no state mechanical board; master-level HVAC licenses are issued by cities under their own ordinances, and a master exam passed in a testing member city (Burleigh County, Bismarck, Fargo, Grand Forks, Minot, Mandan or Dickinson) is accepted by the licensing member cities (also Jamestown, Valley City, Wahpeton, West Fargo and Williston) under the North Dakota Mechanical Reciprocity Administrative Rules, which require at least two years of practical experience beyond the journeyman level; the Reciprocity Eligibility Certificate is not a license. Every contractor whose job exceeds $4,000 also needs the Secretary of State contractor license (Class A-D, $450/$300/$225/$100, liability insurance and WSI verification, no exam).

Fargo. Master Heating license: at least 6,000 hours of journeyman experience plus 4,000 hours of practical experience (10,000 total) verified by employer letters; open-book master mechanical and master fuel gas exams on the 2024 IMC and IFGC ($125 per appointment); license $125 per year expiring December 31, renewed with a certificate of liability insurance naming the City of Fargo. Work in non-owner-occupied buildings must be done by a licensed and insured mechanical contractor.

Bismarck. Class A Master HVAC Installer: two years (3,400 hours) as a licensed journeyman 'licensed by the City or some other governmental jurisdiction', or a master license from a reciprocal jurisdiction; exam on the 2021 IMC and IFGC, $125, 80% to pass, offered monthly; $35 application fee and $125 annual fee expiring December 31; four hours of continuing education per year; a master may qualify only one shop or business at a time; three years (5,300 hours) as a licensed journeyman are needed for a Certificate of Reciprocity to other cities. Legacy licensees who tested before July 1, 2017 may work in Bismarck without retesting.

Grand Forks. Master Mechanical Installer: ND state contractor license, $5,000 license and permit bond payable to the City, certificate of insurance, written mechanical exam with 80% to pass, $170 per year.

Minot. Master HVAC Installer (Master Heating): Heating & Air Conditioning Board exam ($75 per attempt) or a reciprocal license from an approved city with proof of the passed test; $130 initial and $130 annual fee; state contractor license required; annual renewal without re-examination, re-examination after a lapse.

Out-of-state holders. No reciprocity or endorsement for other states' master or contractor licenses was found in any of these cities or in the state reciprocity rules. The practical route is to document journeyman-level hours from the origin state, pass the master exam in one testing member city, obtain the Secretary of State contractor license, and then apply for the local master license (with the local bond or insurance) in each city where work will be done.

Moving to North DakotaLeaving North Dakota

Common questions

Do I have to take the Iowa master HVAC technician exam if I'm licensed in North Dakota?
Yes. Iowa requires the trade exam on this path.
What does it cost to get a Iowa master HVAC technician license from North Dakota?
Published fees on this path total $394, not counting exam vendor fees or bonds.
Do my North Dakota work hours count in Iowa?
Yes. Documented out-of-state experience counts toward Iowa's eligibility requirements.
Does it work the other way, from Iowa to North Dakota?
Not necessarily. Reciprocity is directed. Going from Iowa to North Dakota, the mechanism is not applicable.

Sources

  1. EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026
  2. Iowa Code Chapter 105 - Plumbers, Mechanical Professionals, and Contractors (2026) · Iowa Code 105.2, 105.17, 105.18, 105.19, 105.20, 105.21 · Iowa Legislature · Statute · verified September 23, 2026
  3. Iowa Code 272C.12 - Licensure of persons licensed in other jurisdictions (2026) · Iowa Code 272C.12 · Iowa Legislature · Statute · verified September 16, 2026
  4. DIAL - Plumbing & Mechanical Contractor License · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
  5. DIAL - Plumbing & Mechanical Systems Examination · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
  6. DIAL - Plumbing & Mechanical Systems License Period & Fees · 481 IAC ch. 428 · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
  7. DIAL - Master Level License (plumbing, mechanical, HVAC, refrigeration, sheet metal, hydronic) · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
  8. DIAL - Plumbing & Mechanical Systems Licensure (program home) · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
  9. DIAL - Post-Examination Licensure · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 23, 2026
  10. Iowa Administrative Code 481 Chapter 428 - Plumbing and Mechanical Systems Board Licensure Fees · 481 IAC 428.1 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
  11. Iowa Administrative Code 481 Chapter 429 - Plumbing and Mechanical Systems Board Application, Licensure, and Examination · 481 IAC 429.2, 429.6 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
  12. Iowa Administrative Code 481 Chapter 430 - Plumbing and Mechanical Systems Board Alternative Licensure Pathways · 481 IAC 430.3, 430.4, 430.5 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 23, 2026
  13. Kirkwood Community College - State Disciplines (Iowa plumbing and mechanical examinations) · Kirkwood Community College, the Plumbing and Mechanical Systems Board's contracted exam provider · Form · verified September 23, 2026
  14. Iowa Plumbing and Mechanical Systems Board - Application for License by Reciprocity (Reciprocity App 03/2020) · Iowa Plumbing and Mechanical Systems Board · Form · verified September 15, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related