Do I have to take the New Mexico master HVAC technician exam if I'm licensed in South Dakota?

Yes. New Mexico requires the trade exam on this path, plus a law or code exam.

What does it cost to get a New Mexico master HVAC technician license from South Dakota?

Published fees on this path total $273.76, not counting exam vendor fees or bonds.

Do my South Dakota work hours count in New Mexico?

Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.

Does it work the other way, from New Mexico to South Dakota?

Not necessarily. Reciprocity is directed. Going from New Mexico to South Dakota, the mechanism is not applicable.

South Dakota to New Mexico: master HVAC technician license reciprocity

No credit· Start overVerified September 15, 2026· 7 sources

South Dakota does not issue a statewide master HVAC technician license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state master HVAC or mechanical contractor (all states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

An out-of-state master HVAC technician or mechanical contractor receives no exam waiver in New Mexico. The applicant files the qualifying party application with PSI ($36) and a notarized work-experience affidavit showing four years of experience in the MM-3 classification within the past ten years (out-of-state experience is accepted), then must pass the 100-question MM-3 trade exam ($68.88, 75% to pass) and the Contractor's Business and Law exam ($68.88) or complete a commission-approved business and law course in its place. Once the certificate of qualification is issued, the individual or business applies for the MM-3 contractor's license ($30 application; $50 per year or $100 for the two-year term, or $100 per year for MM-98) and must carry workers' compensation coverage. Anyone who personally services refrigerant-containing equipment also needs federal EPA Section 608 certification, which CID requires of JR journeymen.

CID's pages describe no substantial-equivalence or endorsement review for contractors from any state; the statutory reciprocity authority in NMSA 60-13-14(C) has not been exercised for mechanical classifications as far as any official page shows. A qualifying party may also obtain the parallel JR journeyman certificate without new work-verification forms.

At a glance

Trade exam: Required
Law / code exam: Required
Out-of-state hours: Count toward eligibility

What you must already have

Four years of practical or related trade experience in the MM-3 classification within the ten years immediately before application (NMSA 60-13-14(B)(8); 14.6.6.10 NMAC)

What you'll do to get licensed in New Mexico

1Application fee. Pay the application fee ($36). Qualifying party application and work-experience affidavit fee paid to PSI.
2Trade exam. Pass the destination's trade exam. MM-3 Heat, Vent and Air Conditioning exam administered by PSI: 100 questions, 245 minutes, open book, 75% to pass.
3Exam fee. Pay the exam fee ($68.88). PSI fee for the MM-3 trade exam, first attempt or retake.
4Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam (required of all new candidates) or a commission-approved business and law course.
5Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam.
6Contractor license. Hold or obtain a contractor license ($30). MM-3 contractor's license application fee, non-refundable (14.5.5.8 NMAC); the RLD page lists the company license application at $36.
7License fee. Pay the license or certificate fee ($100). MM-3 contractor's license fee, $50 per year or $100 for the two-year term; MM-98 is $100 per year or $200 for two years (14.5.5.8 NMAC).
8Insurance. Carry the required insurance. Workers' compensation coverage is required for all licensed entities.
9Other. EPA Section 608 technician certification (Type I/II/III/Universal) to handle refrigerants; federal, does not expire; required of anyone who personally services refrigerant circuits.

Published fees on this path total $273.76, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

Trade exam
Exam fee · $68.88
Law / code exam
Exam fee · $68.88
Other

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

Insurance

How New Mexico licenses master HVAC technicians

New Mexico master HVAC technician · “MM-3 HVAC Contractor (qualifying party certificate of qualification)”

Statewide license

Verified September 15, 2026· 5 sources

Issued by New Mexico Construction Industries Division (Regulation and Licensing Department), Mechanical Bureau; applications and exams through PSI

New Mexico has no 'master HVAC' license. Its highest heating and cooling credential is the MM-3 Heating, Ventilation and Air Conditioning contractor classification (install, alter, repair, service and maintain HVAC air-handling and refrigeration equipment, piping and ductwork, with controls at 24 volts or less); the broader MM-98 Mechanical classification covers MM-3 plus plumbing, gas fitting and process piping. CID issues the contractor's license to the contracting entity and a personal, non-transferable certificate of qualification to the qualifying party, the individual who passed the MM-3 trade exam and the Contractor's Business and Law exam, so this site maps the MM-3 qualifying party to the master level. A qualifying party needs four years of experience in the classification within the ten years before application. Even with an MM-3 license the hands-on work must still be done by or under a certified JR or JSM journeyman. CID publishes reciprocity only for EE-98J electrical journeymen; no reciprocity or exam waiver is published for mechanical qualifying parties or contractors, although NMSA 60-13-14(C) allows the division to enter into reciprocal agreements with states having equivalent requirements.

Moving to New Mexico Leaving New Mexico

Why South Dakota has nothing to transfer

South Dakota master HVAC technician

Licensed by cities and counties

Verified September 15, 2026· 11 sources

South Dakota does not issue a master HVAC, mechanical or refrigeration license and has no state board for the trade; only the State Fire Marshal's boiler inspection program exists at state level, and it certifies boilers, not installers. The master-level credential exists only in cities that license mechanical contracting. In Sioux Falls the person-held credential is the Master Mechanic, earned by documenting four years of experience (2,000 hours per year) with a licensed mechanical contractor and passing the city's four-hour open-book exam on the International Mechanical and Fuel Gas Codes ($75, 75% to pass); the master mechanic then qualifies a Mechanical Contractor license ($200 for two years, $10,000 compliance bond, liability insurance), and a separate Refrigeration Contractor license is earned by a shorter IMC exam. In Rapid City the Mechanical Contractor (Class C trade) license is issued to a firm whose designated license holder has six years of verifiable experience, passes the city exam, and carries $1,000,000 liability insurance; it runs three years with six hours of continuing education. Neither city recognizes out-of-state licenses: Sioux Falls says it does not reciprocate any license and requires its exam of everyone, and Rapid City's code recognizes other agencies' licenses only for general building contractor classes. An out-of-state master or HVAC contractor should expect to sit the local exam in each city where they contract.

How local licensing works in South Dakota

How local licensing works. South Dakota has no state HVAC licensing statute, so contractor and master-level credentials exist only under city ordinances. Boilers are inspected and certificated by the State Fire Marshal's Office (Department of Public Safety), which does not license installers or contractors.

Sioux Falls. The Mechanical Board of Appeals and Examiners tests Master Mechanics: four years of experience as a sheet metal mechanic, refrigeration technician, general manager, project manager or engineer employed by a licensed mechanical contractor, at least 2,000 hours per year, with up to one year of credit for trade school or engineering/construction management degrees and up to two years for military work. The exam ($75, non-refundable) is given the second Wednesday of each month, is open book on the 2021 IMC and IFGC (2024 codes to be adopted in 2026), and requires 75%; a first failure may be retaken after 30 days, later failures after 90 days. The Mechanical Contractor license must be applied for within 90 days of passing: $200 for a two-year license expiring December 31 of odd years ($100 if issued in the second year), a $10,000 compliance bond naming the City, current liability insurance, and the master mechanic must be an owner, partner or W-2 employee. The Refrigeration Contractor license uses a separate two-hour, 20-question IMC exam ($75, 75%) with the same bond and fee. An Inactive Master Mechanic license preserves the credential without contracting. The city states it does not reciprocate any licenses.

Rapid City. Under RCMC 15.26.080 a Mechanical Contractor (MC) license is held by a proprietorship, partnership, firm or corporation whose license holder has six years of verifiable experience (education credit of one year per 18-24 month program) and is qualified in planning, superintending and installing mechanical systems; if that person leaves, the firm has 30 days to qualify another. Under RCMC 15.04.140 the designated license holder must pass the city's exam, the firm must carry $1,000,000 aggregate and per-occurrence liability with $300,000 fire damage coverage, the license runs three years, and six hours of continuing education are required per period. License and exam fees are set by council resolution and were not found on a published page. The Building Official may accept another government agency's license only for Class A and B general building licenses.

Out-of-state holders. No reciprocity or endorsement path for out-of-state master or contractor licenses was found in either city. The practical route is to document experience, pass the local exam, and post the local bond and insurance in each city where work will be contracted.

Moving to South Dakota Leaving South Dakota

Common questions

Do I have to take the New Mexico master HVAC technician exam if I'm licensed in South Dakota?: Yes. New Mexico requires the trade exam on this path, plus a law or code exam.
What does it cost to get a New Mexico master HVAC technician license from South Dakota?: Published fees on this path total $273.76, not counting exam vendor fees or bonds.
Do my South Dakota work hours count in New Mexico?: Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
Does it work the other way, from New Mexico to South Dakota?: Not necessarily. Reciprocity is directed. Going from New Mexico to South Dakota, the mechanism is not applicable.

Sources

EPA Section 608 Technician Certification Requirements · 40 CFR Part 82, Subpart F (Clean Air Act §608) · U.S. Environmental Protection Agency · Other · verified September 15, 2026Federal requirement in every state: technicians who maintain, service, repair or dispose of equipment that could release refrigerants into the atmosphere must be certified (Type I small appliances, Type II high-pressure, Type III low-pressure, Universal). Apprentices under direct supervision are exempt. Certification does not expire; the core exam must be proctored for Universal certification. State HVAC boards commonly require it before licensure, but it is not itself a state license.
Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 (as of July 1, 2021) · NMSA 1978 §§ 60-13-14, 60-13-38 · New Mexico Regulation and Licensing Department · Statute · verified September 15, 2026Text extracted from the PDF locally. 60-13-14(B)(8): a license applicant must have had four years, within the ten years before application, of practical or related trade experience in the type of construction applied for. 60-13-14(C): 'The division, with the consent of the commission, may enter into a reciprocal licensing agreement with any state having equivalent licensing requirements.' 60-13-38: no person may work as a journeyman without a certificate of competence; categories include journeyman sheet metal worker and journeyman pipe fitter; applicants take an examination on rules and technical knowledge; eligibility requires two years' experience in the trade or the equivalent, or an approved vocational course.
14.5.5 NMAC - Fees (Construction Industries Division) · 14.5.5.8 and 14.5.5.9 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 15, 2026Non-refundable contractor's license application fee $30.00; license fee $100.00 per year or $200.00 for two years for the GA-98, GB-2, GB-98, GF-98, EE-98 and MM-98 classifications and $50.00 per year or $100.00 for two years for all other classifications (including MM-3). Journeyman certificate renewal fee $25.00 per year (14.5.5.9).
14.6.6 NMAC - Classification and Scope of Licenses and Certificates (mechanical and plumbing) · 14.6.6.10 and 14.6.6.11 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 15, 2026MM-3 Heating, Ventilation and Air Conditioning: four years of experience; scope is to 'install, alter, repair, service and maintain HVAC air handling and refrigeration equipment and piping, including fans, coils, condensing units, self-contained packaged air conditioning or heating units, evaporative cooling units, and ductwork' plus controls at 24 volts or less. MM-98 Mechanical (four years) covers MM-1 through MM-4 and the MS-3, MS-6, MS-12 and MS-14 specialties. Journeyman classifications: JR Journeyman Refrigeration (two years; 'must demonstrate compliance with environmental protection agency (EPA) recovery requirements before certificate may be issued'; works under MM-3, MM-4, MM-98 or JSM) and JSM Journeyman Sheet Metal (two years; works under MM-3 or MM-98).
State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 15, 2026Text extracted from the PDF locally. Business and Law exam 'REQUIRED OF ALL NEW CANDIDATES' $68.88, or an approved Business and Law course may be taken instead; trade exams for MM-1, MM-2, MM-3, MM-4 and the MS specialties are $68.88 each, first time or retake. MM-3 Heat, Vent and Air Conditioning exam: 100 questions, 245 minutes, 75% (75 points) to pass, open book on the 2021 Uniform Mechanical Code, 2015 New Mexico Mechanical Code and Modern Refrigeration and Air Conditioning; content covers motors/controls, piping, heating and cooling equipment, refrigerants and refrigeration, and ductwork/ventilation. No reciprocity or out-of-state exam waiver is described.
NM CID / PSI - How to Obtain a Journeyman Certificate and Application for Journeyman Certificate (updated Aug 2025) · PSI Services for the NM Construction Industries Division · Form · verified September 15, 2026Text extracted from the PDF locally. States that mechanical work must be performed by or under the supervision of a certified journeyman even when a contractor's license is held. Experience table: JR Journeyman refrigeration and JSM Journeyman sheet metal require two years (4,000 hours); experience must have been gained while employed by a contractor licensed in the trade or be 'legal work in the state in which the work was performed'. Application fee $75.00 per classification, paid to PSI; notarized application and work experience affidavits; certificate active three years. Question 3(c) limits the reciprocity program to 'Electrical Journeyman (EE98J ONLY)'; question 3(p): a Journeyman Refrigeration (JR) applicant 'must attach proof of your EPA certification for refrigerant recovery'. Reciprocity applicants must have held the license at least one year in the state where they tested.
NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 15, 2026Section 'Reciprocal Journeyman in New Mexico': 'The only journeyman classification reciprocated in New Mexico is EE-98J, residential and commercial electrical'; no mechanical or refrigeration journeyman classification is reciprocated. Section 'Becoming a Qualifying Party': QP applicants need the required years of experience within the 10 years before application, must pass the classification exam(s) and a Contractor's Business and Law exam, must be pre-approved to schedule exams, and pay a $36 QP application and work-experience affidavit fee; the company license application fee is $36 plus license fees. No reciprocity is mentioned for qualifying parties or contractors.

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page