Florida to New Hampshire: journeyman plumber license reciprocity
Florida does not issue a statewide journeyman plumber license, so there is nothing to transfer. Here is New Hampshire's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Traditional application and New Hampshire plumbing examination (non-qualifying jurisdictions)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
An out-of-state journeyman whose origin is not on OPLC's Plc 313.34 qualifying-jurisdiction list cannot use endorsement and applies through the traditional Mechanical Licensing Board process. Saf-Mec 302.14 states that an out-of-state licensee is eligible for the New Hampshire plumbing licensing examination upon proof of licensure or certification from the state where the applicant claims to have worked; the out-of-state credential does not waive the exam. After passing, the applicant pays the $198 two-year journeyman plumber fee in Plc 1002.25. Plc 313.11 lets an individual from a non-listed jurisdiction request a waiver of endorsement criteria based on education, training and experience; OPLC's reciprocity FAQs (electrical extraction) also allow a request to reconsider whether a jurisdiction is substantially similar.
Re-open https://www.oplc.nh.gov/new-changes-reciprocity-new-hampshire in a browser and add Endorsement agreements (examTradeRequired false) for each listed plumber origin; use Reciprocity only if a signed waiver-of-exam agreement is published.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 14 days
What you must already have
- Your Florida license must be active and in good standing.
- Fee, eligibility details, and processing steps are not published in a form we can list here. Please see the sources on this page to find out more.
What you'll do to get licensed in New Hampshire
- 1Trade exam. Pass the destination's trade exam. New Hampshire journeyman plumber licensing examination (Mechanical Licensing Board; Prov candidate bulletin is linked from the board home page)..
- 2Application fee. Pay the application fee ($198). Journeyman plumber application / two-year license fee (Plc 1002.25 and OPLC Mechanical Safety and Licensing Board fee table)..
- 3Other. Demonstrate proof of origin-state plumber licensure or certification with the application (Saf-Mec 302.14)..
Published fees on this path total $198, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
How New Hampshire licenses journeyman plumbers
New Hampshire journeyman plumber · “Journeyman Plumber”
Statewide license
Issued by New Hampshire Mechanical Licensing Board, Office of Professional Licensure and Certification (OPLC)
New Hampshire issues a statewide Journeyman Plumber license through the Mechanical Licensing Board in the Office of Professional Licensure and Certification (OPLC). The same board licenses trainee/apprentice plumbers, master plumbers and mechanical business entities, and also regulates fuel gas fitters; it does not license HVAC technicians. The published two-year journeyman plumber fee is $198 (OPLC Mechanical Safety and Licensing Board fee table; Plc 1002.25). Since 3 May 2024, out-of-state journeymen from jurisdictions OPLC has determined substantially similar under RSA 310:17 and Plc 313.34 may be licensed by endorsement without the New Hampshire exam; Plc 313.34 treats a comparable journeyman path as a four-year apprenticeship with 560 instruction hours plus an exam, and the origin code must be the same or a later edition of New Hampshire's building and fire codes. Everyone else uses the traditional route: Saf-Mec 302.14 makes an out-of-state plumber license sufficient to sit the New Hampshire plumbing examination (Prov bulletin linked from the board page); the exam itself is not waived.
Why Florida has nothing to transfer
Florida journeyman plumber · “Journeyman Plumber certificate of competency (county-issued)”
Licensed by cities and counties
Issued by County and municipal licensing boards (no state journeyman license)
Florida has no state journeyman plumber license. The Construction Industry Licensing Board within DBPR certifies and registers plumbing contractors only (occupation codes CF/RF); s. 489.105 never defines 'journeyman', and the Board's plumbing application list has no journeyman credential. Hillsborough County states there is 'no State of Florida requirement for anyone to hold a Journeyman Certificate of Competency.' Section 489.1455, F.S., instead authorizes counties and municipalities to issue journeyman licenses in the plumbing (and pipe fitting, mechanical, or HVAC) trades to a person who scores at least 75 percent on a proctored journeyman exam, has completed a registered apprenticeship or 12,000 hours of on-the-job training, and completes Florida Building Commission coursework, and it requires every county and municipality to recognize a journeyman licensed by any other Florida county or municipality. Large urban counties run such programs (Hillsborough's Journeyman Plumber Certificate of Competency; Miami-Dade's Construction Trades Qualifying Board plumbing journeyman card). An out-of-state journeyman plumber license carries no state-level recognition, so an arriving plumber should expect to document experience and take the county exam in the first county that requires a card, after which that Florida county card is portable statewide under s. 489.1455(2).
How local licensing works in Florida
How local licensing works. DBPR's Construction Industry Licensing Board certifies (statewide) and registers (locally qualified) plumbing contractors and issues no personal license below contractor. Section 489.1455, F.S. lets counties and municipalities license journeymen in the plumbing, pipe fitting, mechanical and HVAC trades on three conditions: 75 percent on a proctored Block and Associates or other board-approved journeyman exam, a registered and state-approved apprenticeship or 12,000 hours of on-the-job training, and Florida Building Commission-approved coursework (within 6 months of certification). Subsection (2) makes every county and municipality recognize a journeyman licensed by any other Florida county or municipality. A journeyman card never authorizes contracting; the holder works under a certified or registered plumbing contractor.
Hillsborough County. Development Services issues a Journeyman Electrician or Plumber Certificate of Competency. Fees on the 2026-09-16 page: $50 nonrefundable initiation, $100 on acceptance, $70 one-time registration. The holder 'must always work under the supervision of a properly licensed Electrical/Plumbing Contractor.' Application is through HillsGovHub with apprenticeship completion (if any), an approved-agency exam score if already tested, and a verification-of-experience form. From the 2026-09-15 reading of the same hub: three years of proven field experience (up to one-half education equivalent), open-book exam at 75 percent or above, $240 fee; the county 'only reciprocates with Broward and Palm Beach County in specific trade categories' and only for journeymen who scored 75% or higher. The 2026-09-16 hub extract did not reprint those figures.
Pinellas County. The Pinellas County Construction Licensing Board journeyman application (read 2026-09-15 for HVAC/electrical FL; pinellas.gov and the PDF failed to extract on 2026-09-16) offered Plumbing, Electrical, Pipe Fitting, Air Conditioning and Sheet Metal Journeyman classifications: open-book independent-agency exam, about six hours, passing grade 70%, $75 non-refundable application fee, notarized employer experience certificates, six-year employment history and three character letters. No out-of-state reciprocity is printed on that form. Journeymen must be certified by PCCLB to work in the county.
Broward, Palm Beach, Orange and Duval. Broward County's Building Code Division Central Examining Boards use a contractor/journeyman packet (Chapter 9) that the HVAC and electrical FL files document for mechanical and electrical journeymen ($225 journeyman application / $120 renewal / $50 letter of reciprocity as of January 1, 2025; 75% GITS or ProV exam). Treat those as leads.
Out-of-state journeymen. None of the county programs reviewed publishes an out-of-state reciprocity rule. Expect to sit the first county's exam; a qualifying Florida county card is then recognized statewide under s. 489.1455(2).
- Hillsborough County (Development Services, Journeyman Plumber Certificate of Competency)
- Miami-Dade County (Construction Trades Qualifying Board - Plumbing)
- Pinellas County (Pinellas County Construction Licensing Board - Plumbing Journeyman)
- Broward County (Building Code Division, Central Examining Boards)
Common questions
- Do I have to take the New Hampshire journeyman plumber exam if I'm licensed in Florida?
- Yes. New Hampshire requires the trade exam on this path.
- What does it cost to get a New Hampshire journeyman plumber license from Florida?
- Published fees on this path total $198, not counting exam vendor fees or bonds.
- Do my Florida work hours count in New Hampshire?
- Yes. Documented out-of-state experience counts toward New Hampshire's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 14 days.
- Does it work the other way, from New Hampshire to Florida?
- Not necessarily. Reciprocity is directed. Going from New Hampshire to Florida, the mechanism is not applicable.
Sources
- NH OPLC - Mechanical Licensing Board (who we regulate; plumber licenses) · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- NH OPLC - License Fees for the Mechanical Safety and Licensing Board · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- OPLC - Reciprocity Licensing (HB 594 overview) · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- NH OPLC - New Changes for Reciprocity in New Hampshire (endorsement qualifying jurisdictions by board) · RSA 310:17; Plc 313.34 · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- N.H. Code Admin. R. Plc 1002.25 - Mechanical Licensing Board application and licensing fees · Plc 1002.25 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
- N.H. Code Admin. R. Plc 313.34 - Substantially similar requirements for Mechanical Licensing Board professions · Plc 313.34 (eff. 5-3-24, #13954); Plc 313.01; Plc 313.11 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
- RSA Chapter 153 - Fire Safety; Mechanical Licensing Board (plumber and fuel gas licensing) · RSA 153:16-b; RSA 153:27-a; RSA 153:28; RSA 153:36, VII · New Hampshire General Court · Statute · verified September 16, 2026
- RSA 310:17 - License Reciprocity (OPLC endorsement of out-of-state licenses) · RSA 310:17 (2023, 111:1, eff. Aug. 27, 2023) · New Hampshire General Court · Statute · verified September 16, 2026
- N.H. Code Admin. R. Saf-Mec 300 - Initial fuel gas fitting and plumbing licensing · Saf-Mec 302.14 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.