Wyoming to Iowa: journeyman plumber license reciprocity
Wyoming does not issue a statewide journeyman plumber license, so there is nothing to transfer. Here is Iowa's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state journeyman plumber (all states except South Dakota): Iowa exam required; licensure by verification for Iowa residents
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Iowa has no plumbing reciprocity agreement with any state other than South Dakota, so a journeyman plumber from any other state must pass the Iowa journeyperson plumbing exam. An applicant who has established Iowa residency may apply for licensure by verification under Iowa Code 272C.12 and 481 IAC 430.4: the origin state sends a verification form directly to the board confirming the license is in good standing and was earned by meeting that state's experience requirements and exam, and the applicant supplies proof of residency and a criminal history statement; the board nevertheless requires proof of passing the applicable Iowa licensing exam and may issue a temporary license in the meantime. A non-resident applies through the ordinary exam route: the $35 Exam Approval Application, the Kirkwood-administered journeyperson plumbing exam ($99 per attempt, 75% to pass, approval valid one year), then the post-examination licensure application and a prorated three-year license fee ($180 for a full term). Exam eligibility on DIAL's page is either the U.S. DOL apprenticeship certificate of completion or a master-level plumbing license from another jurisdiction; a journeyman license alone is not listed as a substitute for the apprenticeship. An Iowa resident arriving from a jurisdiction that did not license plumbers may substitute three years of full-time plumbing work in the last four years under 481 IAC 430.5 and must still pass the exam.
DIAL's journey page lists the Kirkwood exam fee as $99 per attempt while the master page lists $95; both are quoted as published. DIAL's journey page frames an out-of-state master license as an alternative to 'four years of apprenticeship AND passing the Iowa exam' and offers a 'Journey by Master' application, but adds 'If you need to sit for the examination, please see the Examination page'; whether a holder of an out-of-state master plumbing license receives an Iowa journey license without any exam was not confirmed and Iowa Code 105.18 (as read 2026-09-15) requires every journeyperson to pass the state exam, so this rule treats the exam as required. Whether the board accepts an out-of-state journeyman license (without a DOL certificate) as meeting the apprenticeship requirement for a non-resident is not stated on any page fetched. Timeline reflects up to two weeks for exam approval plus up to six weeks for application review, excluding exam scheduling.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 60 days
What you must already have
- Your Wyoming license must be active and in good standing.
- You must have no disciplinary action or unresolved complaints on your record.For licensure by verification: no revocation, voluntary surrender under investigation, unresolved discipline or pending complaint in any jurisdiction (272C.12; 481 IAC 430.4(3)).
- Your Wyoming license must have been obtained by examination, not by reciprocity or grandfathering.
- Licensure by verification requires established Iowa residency or a military spouse's permanent change of station to Iowa (272C.12; 481 IAC 430.4); non-residents use the standard exam route
- Exam eligibility: four years as an apprentice in a U.S. DOL Office of Apprenticeship-registered program (certificate of completion), or a master-level plumbing license from another jurisdiction (DIAL journey page; Iowa Code 105.18)
- You must document at least 3 years of qualifying work experience.
What you'll do to get licensed in Iowa
- 1Application fee. Pay the application fee ($35). Exam Approval Application fee, per trade discipline exam (DIAL fees page).
- 2Trade exam. Pass the destination's trade exam. Iowa Journeyperson Plumbing examination administered through Kirkwood Community College at 15 Iowa test sites; 75% to pass; exam approval valid one year; also required of licensure-by-verification applicants under 481 IAC 430.4.
- 3Exam fee. Pay the exam fee ($99). Kirkwood Community College examination fee, per attempt (as listed on DIAL's journey license page).
- 4License fee. Pay the license or certificate fee ($180). Journeyperson license fee for a full three-year term (July 1, 2026 - June 30, 2029), prorated by half-year for later issuance (e.g. $90 for Jan-Jun of year 2); same amount for a license by verification.
- 5Application fee. Pay the application fee ($25) (if applicable). Paper application fee if not filed through the DIAL online licensing portal.
- 6Background check. Complete a background check. Documentation of any criminal convictions (felony convictions reviewed by the board); licensure-by-verification applicants submit a complete criminal record and any disciplinary documents (481 IAC 430.4). Lawful presence is verified through SAVE..
- 7Continuing education. Complete continuing education. Eight classroom hours of board-approved continuing education per three-year term to renew (Iowa Code 105.20); not required for initial licensure.
Published fees on this path total $314, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee · $99
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Iowa licenses journeyman plumbers
Iowa journeyman plumber · “Journeyperson Plumber”
Statewide license
Issued by Iowa Plumbing and Mechanical Systems Board, Department of Inspections, Appeals, and Licensing (DIAL)
Iowa issues a statewide, person-held Journeyperson Plumber license through the Plumbing and Mechanical Systems Board (PMSB), now part of the Department of Inspections, Appeals, and Licensing (DIAL); Iowa Code 105.17 preempts all city and county plumber licensing. A journeyperson works under the supervision of a master plumber. A new applicant must be 18, disclose any criminal convictions, complete four years as an apprentice in a U.S. Department of Labor-registered apprenticeship, and pass the Iowa journeyperson plumbing exam, which is approved by the board ($35 application) and administered through Kirkwood Community College ($99 per attempt, 75% to pass). Iowa's only reciprocity agreement is with the South Dakota State Plumbing Commission (May 2016) and covers journeyperson and master plumbers licensed by written examination; every other out-of-state journeyman must pass the Iowa exam, although a master plumber licensed in another jurisdiction may qualify for the Iowa journey license without the apprenticeship. Licenses run on a three-year cycle (current period ends June 30, 2029) with a full-term fee of $180, prorated for mid-cycle issuance, and renewal requires eight hours of board-approved continuing education per term.
Why Wyoming has nothing to transfer
Wyoming journeyman plumber
Licensed by cities and counties
Wyoming has no statewide plumber license at any level. The only state construction-trade licensing program is the State Fire Marshal's electrician program, which lists no plumbing or mechanical credential, so a journeyman plumber license exists only where a city ordinance creates one. Cheyenne, Casper, Laramie, Gillette and Sheridan each license journeyman plumbers (and apprentices) individually, all requiring four years or a completed apprenticeship plus an ICC National Standard plumbing exam (G28-N journeyman or G27-N master), while Jackson has stopped issuing journeyman cards altogether and Rock Springs only registers contractors. No city accepts another state's journeyman license: Casper, Gillette and Jackson reciprocate only with other Wyoming jurisdictions, Sheridan expressly refuses licenses from other cities or states, Cheyenne's Board keeps discretion but cites a state statute limiting reciprocity to Wyoming jurisdictions, and Laramie's building official may waive the exam for a certificate from any governmental agency whose exam is judged at least equal. An out-of-state journeyman should expect to document their hours, present or sit the ICC exam through Pearson VUE, and apply separately in each city where they will work.
How local licensing works in Wyoming
How local licensing works. Wyoming licenses electricians through the State Fire Marshal but has no plumbing board, so plumber licensing is entirely a matter of city ordinance and each city sets its own classes, hours, exam and fees. The reciprocity statute the cities cite reaches only licenses issued by other Wyoming jurisdictions; none of the cities below publishes a path that recognizes another state's plumber license.
Cheyenne. The Contractor Licensing Board licenses Plumbing (Class C1, tested) contractors and requires every employee on a plumbing job site to hold a master, journeyman or apprentice license. A journeyman (12.1.9) documents 4 years/8,000 hours as a licensed apprentice (or certified equivalent training) and passes a current ICC, NICET or NASCLA exam from the Board's list, paid to the testing agency; a Residential Plumbing Journeyman (12.1.11) needs 2 years/4,000 hours and may work only on IRC residential structures at a 1:1 apprentice ratio. Fees: $50 application plus $30 initial and $15 renewal (apprentice $25 + $25, $15 renewal); licenses expire annually. Up to three apprentices may work under one journeyman or master. Trade employees registered for the exam can get a one-time 30-day temporary work authorization (60 days maximum). Reciprocity (3.3.2): the Board 'may grant reciprocity with other State jurisdictions and agencies as the Board determines appropriate', notes that Wyoming's statute allows reciprocity for Wyoming jurisdictions only, evaluates even those case by case, and may accept a test exceeding its published exams from someone holding a current equivalent license elsewhere - no partner list is published.
Casper. The Community Development Department issues Journeyman Plumber licenses ($25 new, $15 renewal) to applicants with a federally recognized plumbing apprenticeship or the equivalent of four years in a Casper-licensed plumbing shop plus proof of passing ICC G27-N or G28-N (or equivalent); apprentice licenses ($3) are issued to the contractor in the apprentice's name. Reciprocal Plumbing Master/Journeyman licenses ($50/$25) exist only for holders of a current, good-standing license from another Wyoming jurisdiction with comparable testing.
Laramie. A journeyman plumbing certificate of qualification requires four years' employment with a licensed plumbing contractor (Table 15.24.020-1) and the building official's examination; the application fee is $5 per exam attempt, and a failed exam bars retesting for 30 days (six months after a second failure). In lieu of the exam, the building official may issue the certificate to anyone presenting a valid certificate from 'any other governmental agency giving an examination' that the board of examiners considers at least equal - the only Wyoming city whose rule is not limited to Wyoming jurisdictions. Journeymen work only under a certified master, each journeyman or master may supervise two apprentices, certificates expire December 31 (renew by January 31), and applications go through the Civic Access portal.
Gillette. Journeyman Plumber ($25 new, $25 renewal) requires four years of approved experience and passing ICC examination results (5-III-21/22); the ICC computer-based exam is taken through Pearson VUE. Apprentices ($5) qualify after 30 days with a Gillette-licensed plumbing contractor, and one master or journeyman supervises up to three apprentices. Reciprocity (5-III-1(d), effective July 1, 2024) is granted without fee only to active, good-standing licenses of a similar class from another Wyoming city, county or town, with testing waived on proof of the ICC plumbing exam.
Sheridan. Journeyman Plumber ($50 new, $50 annual renewal) requires four years of journeyman plumber experience (Form JP) or a completed approved four-year apprenticeship and the 2018 ICC G28 Journeyman Plumber with Gas exam; one licensed contractor or journeyman is required per three apprentices. The City's FAQ states it 'does not accept licensing from other cities, towns, counties, or states as a means to obtain licensing locally'. Applications go through the OpenGov portal.
Jackson. The Town no longer issues or requires Apprentice or Journeyman Certificate of Qualification cards; only Master COQ cards are issued. A journeyman-level plumber works in Jackson as an employee of a Town-licensed plumbing contractor whose Master of Record holds a Master COQ, and needs no individual Town card.
Rock Springs. The Building Inspection Office registers contractors ($125 fee plus a certificate of insurance) and licenses no individual plumbers; no exam or hours are required.
- Cheyenne (Contractor Licensing Board / Building Safety Department)
- Casper (Community Development Department)
- Laramie (Code Administration)
- Gillette (Building Inspection Division / Board of Examiners)
- Sheridan (Building Division)
- Jackson (Planning & Building Department)
- Rock Springs (Building Inspection Office)
Common questions
- Do I have to take the Iowa journeyman plumber exam if I'm licensed in Wyoming?
- Yes. Iowa requires the trade exam on this path.
- What does it cost to get a Iowa journeyman plumber license from Wyoming?
- Published fees on this path total $314, not counting exam vendor fees or bonds.
- Do my Wyoming work hours count in Iowa?
- Yes. Documented out-of-state experience counts toward Iowa's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 60 days.
- Does it work the other way, from Iowa to Wyoming?
- Not necessarily. Reciprocity is directed. Going from Iowa to Wyoming, the mechanism is not applicable.
Sources
- Iowa Code Chapter 105 - Plumbers, Mechanical Professionals, and Contractors (2026) · Iowa Code 105.2, 105.17, 105.18, 105.19, 105.20, 105.21 · Iowa Legislature · Statute · verified September 16, 2026
- Iowa Code 272C.12 - Licensure of persons licensed in other jurisdictions (2026) · Iowa Code 272C.12 · Iowa Legislature · Statute · verified September 16, 2026
- DIAL - Plumbing & Mechanical Systems License Period & Fees · 481 IAC ch. 428 · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 16, 2026
- DIAL - Journey Level License (plumbing, mechanical, HVAC, refrigeration, sheet metal, hydronic) · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 16, 2026
- DIAL - Master Level License (plumbing, mechanical, HVAC, refrigeration, sheet metal, hydronic) · Iowa Department of Inspections, Appeals, and Licensing (DIAL), Plumbing and Mechanical Systems Board · Agency Page · verified September 16, 2026
- Iowa Administrative Code 481 Chapter 429 - Plumbing and Mechanical Systems Board Application, Licensure, and Examination · 481 IAC 429.2, 429.6 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 16, 2026
- Iowa Administrative Code 481 Chapter 430 - Plumbing and Mechanical Systems Board Alternative Licensure Pathways · 481 IAC 430.3, 430.4, 430.5 · Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 16, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.