LicensebyState

Kansas to New Hampshire: master plumber license reciprocity

No credit· Start overVerified September 16, 2026· 9 sources

Kansas does not issue a statewide master plumber license, so there is nothing to transfer. Here is New Hampshire's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Traditional application and New Hampshire master plumbing examination (non-qualifying jurisdictions)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

An out-of-state master plumber whose origin is not on OPLC's Plc 313.34 qualifying-jurisdiction list applies through the traditional Mechanical Licensing Board process. Saf-Mec 302.14 makes proof of origin-state licensure or certification enough to sit the New Hampshire plumbing licensing examination; it does not waive that exam. Plc 313.34's similarity standard for masters is journeyman experience plus an exam, which is the endorsement bar, not a confirmed hour table for the exam route. After passing, the applicant pays the $330 two-year master plumber fee. A separate $275 mechanical business entity fee is published for firms; treat entity licensure as distinct from the personal master license until the statute and applications page are re-read.

After a browser pass, add Endorsement agreements (exam waived) for listed master origins only; Reciprocity only if a signed exam-waiver agreement is published.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Count toward eligibility
Typical processing
About 14 days

What you must already have

  • Your Kansas license must be active and in good standing.
  • Fee, eligibility details, and processing steps are not published in a form we can list here. Please see the sources on this page to find out more.

What you'll do to get licensed in New Hampshire

  1. 1Trade exam. Pass the destination's trade exam. New Hampshire master plumber licensing examination (Mechanical Licensing Board; Prov candidate bulletin linked from the board home page)..
  2. 2Application fee. Pay the application fee ($330). Master plumber application / two-year license fee (Plc 1002.25 and OPLC Mechanical Safety and Licensing Board fee table)..
  3. 3Business license. Obtain a business license ($275) (if applicable). Mechanical business entity application/renewal/reinstatement fee ($275, Plc 1002.25 / OPLC fee table)..
  4. 4Other. Demonstrate proof of origin-state plumber licensure or certification with the application (Saf-Mec 302.14)..

Published fees on this path total $330, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license · $275 · if applicable

How New Hampshire licenses master plumbers

New Hampshire master plumber · “Master Plumber

Statewide license

Verified September 16, 2026· 9 sources

Issued by New Hampshire Mechanical Licensing Board, Office of Professional Licensure and Certification (OPLC)

New Hampshire issues a statewide Master Plumber license through the same OPLC Mechanical Licensing Board that licenses journeyman and trainee plumbers. The published two-year master plumber fee is $330 (OPLC fee table; Plc 1002.25). RSA 153 lets the board enter reciprocity agreements for plumbers whose requirements are equivalent or greater; no signed master-plumber partner list was confirmed, so none are recorded. Out-of-state masters who are not in a qualifying jurisdiction remain eligible for the New Hampshire master plumbing examination upon proof of licensure (Saf-Mec 302.14).

Moving to New HampshireLeaving New Hampshire

Why Kansas has nothing to transfer

Kansas master plumber

Licensed by cities and counties

Verified September 16, 2026· 6 sources

Kansas issues no statewide master plumber or plumbing contractor license; the master credential exists only in county and city programs operating under K.S.A. 12-1508 and 12-1509. State law requires a master certificate to rest on a journeyman certificate held at least two years or four years of field experience, plus a 75% score on an ICC, IAPMO or Prometric standard master plumber exam, and makes a certificate earned that way valid proof of competency in every Kansas jurisdiction that licenses plumbers without additional examination. Sedgwick County/Wichita (MABCD) issues master plumber certificates ($35) on ICC K9F/557 Master Plumber with Gas or the IAPMO master exam; Johnson County uses the same ICC 557/KGF exam to qualify the individual behind a Class DP Plumbing Contractor license ($100 application plus $225 per license type); Topeka licenses trade contractors through a designated master with six hours of annual continuing education. None of the jurisdictions reviewed has a reciprocity agreement with another state, and MABCD states it 'does not reciprocate with state testing', so an out-of-state master plumber license transfers nothing except a qualifying ICC, IAPMO or Prometric score the applicant may already hold and documented experience. Lawrence and Kansas City, Kansas also license master plumbers, but their pages could not be retrieved in this pass.

How local licensing works in Kansas

How local licensing works. There is no state plumbing board. K.S.A. 12-1508 designates the ICC, IAPMO and Prometric standard exams for 'plumbing contractors and master and journeyman plumbers', and K.S.A. 12-1509 lets a county or city issue a master certificate of competency only after verifying that the applicant has held a valid journeyman certificate for at least two years or has at least four years of field experience, and has scored 75% on the standard master exam. That certificate 'shall be valid proof of competency for licensure, without additional examination, in any county or city of the state which requires licensure of plumbers'; each jurisdiction issues its own certificate for a uniform fee and requires 12 hours of continuing education biennially or six annually, half in code. Contracting (pulling permits and running a plumbing business) is licensed separately by each jurisdiction and generally requires a master-level qualifying individual plus insurance. The act is silent on out-of-state licenses; AG Op. 1999-42 says cities may not add licensure requirements beyond the act.

Sedgwick County and Wichita (MABCD). Plumbing master certificate ($35, Form 19A): must hold a plumbing journeyman certificate plus two years of field experience as a journeyman, or have four years of field experience, and score 75% or better on ICC K9F Master Plumber with Gas, ICC 557 Master Plumber with Gas or the IAPMO master exam, documented by an official passing letter. Certificates are good for two years and renew for $35 with three trade-specific and three general CEUs each year. MABCD 'does not reciprocate with state testing'; approved testing bodies are Block, Experior, Prometric, ICC and IAPMO, and MABCD no longer sponsors its own exams. Plumbing contractors are licensed separately by MABCD Contractor Licensing. Out-of-state treatment: an out-of-state master license is not accepted in lieu of the exam; a qualifying ICC 557-series or IAPMO master score plus documented experience is.

Johnson County. Does not license individuals. The master-level credential is the qualifying individual (QI) of a Class DP Plumbing Contractor license, who must present a verifiable passing score on ICC Master Plumbing with Gas (557/KGF); the county 'may be able to recognize ICC National exams if it can be verified to have a 75% or higher score.' The company pays a $100 application fee plus $225 per license type ($325 for one DP license), renews annually for $225 ($75 late fee from Feb. 1), and files general liability insurance, workers' compensation or a notarized waiver, and a Kansas Certificate of Good Standing if applicable; new applications are filed in person or by mail. A trade contractor's designated master must complete six hours of continuing education a year (three in the trade); licenses renew by December 14, fees are not prorated, and applications include the ICC passing certification or approved alternative education plus insurance and workers' compensation certificates (or a notarized exemption affidavit). V art. The applicant should obtain an official ICC (557/K9F/KGF series) or IAPMO master plumber passing letter (retesting through Pearson VUE or IAPMO if the origin exam was a state-specific test), document two years as a journeyman or four years of field experience, and apply to the first Kansas jurisdiction where they will work; under K.S.A. 12-1509(b) that certificate then supports licensure in every other Kansas county or city without another exam. A contractor license, insurance and, in Johnson County, a company-level Class DP license are separate requirements.

Moving to KansasLeaving Kansas

Common questions

Do I have to take the New Hampshire master plumber exam if I'm licensed in Kansas?
Yes. New Hampshire requires the trade exam on this path.
What does it cost to get a New Hampshire master plumber license from Kansas?
Published fees on this path total $330, not counting exam vendor fees or bonds.
Do my Kansas work hours count in New Hampshire?
Yes. Documented out-of-state experience counts toward New Hampshire's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 14 days.
Does it work the other way, from New Hampshire to Kansas?
Not necessarily. Reciprocity is directed. Going from New Hampshire to Kansas, the mechanism is not applicable.

Sources

  1. NH OPLC - Mechanical Licensing Board (who we regulate; plumber licenses) · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
  2. NH OPLC - License Fees for the Mechanical Safety and Licensing Board · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
  3. OPLC - Reciprocity Licensing (HB 594 overview) · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
  4. NH OPLC - New Changes for Reciprocity in New Hampshire (endorsement qualifying jurisdictions by board) · RSA 310:17; Plc 313.34 · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
  5. N.H. Code Admin. R. Plc 1002.25 - Mechanical Licensing Board application and licensing fees · Plc 1002.25 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
  6. N.H. Code Admin. R. Plc 313.34 - Substantially similar requirements for Mechanical Licensing Board professions · Plc 313.34 (eff. 5-3-24, #13954); Plc 313.01; Plc 313.11 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
  7. RSA Chapter 153 - Fire Safety; Mechanical Licensing Board (plumber and fuel gas licensing) · RSA 153:16-b; RSA 153:27-a; RSA 153:28; RSA 153:36, VII · New Hampshire General Court · Statute · verified September 16, 2026
  8. RSA 310:17 - License Reciprocity (OPLC endorsement of out-of-state licenses) · RSA 310:17 (2023, 111:1, eff. Aug. 27, 2023) · New Hampshire General Court · Statute · verified September 16, 2026
  9. N.H. Code Admin. R. Saf-Mec 300 - Initial fuel gas fitting and plumbing licensing · Saf-Mec 302.14 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related