LicensebyState

Kansas to New Mexico: master plumber license reciprocity

No credit· Start overVerified September 16, 2026· 5 sources

Kansas does not issue a statewide master plumber license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state master plumber or plumbing contractor (all states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

An out-of-state master plumber or plumbing contractor receives no exam waiver in New Mexico. The individual files the notarized Qualifying Party application and work-experience affidavits with PSI ($36) showing four years of plumbing experience within the ten years before application (out-of-state experience is accepted on the same affidavits), is pre-approved, then must pass the 100-question open-book MM-1 Plumbing exam ($68.88, 75% to pass) and the Contractor's Business and Law exam ($68.88) or complete an approved business and law course in its place; passing scores are valid for one year. The business then applies to PSI for the MM-1 (or MM-98) contractor's license with a $36 application fee, the license fee ($50 per year or $100 for two years for MM-1; $100 per year or $200 for two years for MM-98), a $10,000 license bond, a New Mexico tax registration certificate and proof of workers' compensation coverage. Because New Mexico has no master plumber certificate, an out-of-state master who only wants to work with the tools applies for the JP journeyman certificate under the journeyman path instead.

Neither the RLD page, 14.6.3/14.6.4 NMAC nor the PSI contractor bulletin describes any substantial-equivalence review for contractors or qualifying parties from another state; the statutory reciprocity authority in NMSA 60-13-14(C) has not been exercised for mechanical or plumbing classifications as far as any official page shows. The only statutory experience waiver (60-13-14(B)(8)(b)) applies to a qualifying party previously certified in New Mexico in the same classification. Fee conflict: 14.5.5.8 NMAC sets the contractor license application fee at $30 while the RLD page lists $36 for both the QP application and the company license application; the RLD/PSI figure is used here. An MM-98 candidate takes the individual MM-1 through MM-4 exams; no combined MM-98 exam is listed.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Four years of practical or related trade experience in the MM-1 plumbing classification within the ten years immediately before application (NMSA 60-13-14(B)(8); 14.6.6.11(B)(1) NMAC), verified on notarized work-experience affidavits

What you'll do to get licensed in New Mexico

  1. 1Application fee. Pay the application fee ($36). Qualifying Party application and work-experience affidavit fee paid to PSI (notarized; submitted by hand or mail to the PSI Albuquerque office).
  2. 2Trade exam. Pass the destination's trade exam. MM-1 Plumbing exam by PSI: 100 questions, 250 minutes, open book (2021 Uniform Plumbing Code, 2015 NM Plumbing Code 14.8.2 NMAC, 2021 Uniform Mechanical Code), 75% (75 points) to pass.
  3. 3Exam fee. Pay the exam fee ($68.88). PSI fee for the MM-1 trade exam, first attempt or retake.
  4. 4Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam (required of all new candidates) or a commission-approved Business and Law course taken with an approved vendor in its place.
  5. 5Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam.
  6. 6Other. Certificate of qualification issuance fee (14.5.5.14(A) NMAC) ($6).
  7. 7Contractor license. Hold or obtain a contractor license ($36). MM-1 or MM-98 contractor's license application fee paid to PSI by the business (RLD page; 14.5.5.8 NMAC still reads $30), with tax registration certificate and the qualifying party's certificate or scores.
  8. 8License fee. Pay the license or certificate fee ($100). MM-1 contractor's license fee, $50 per year or $100 for the two-year term; MM-98 is $100 per year or $200 for two years (14.5.5.8 NMAC).
  9. 9Surety bond. Post a surety bond ($10,000). $10,000 contractor's license bond from a corporate surety authorized in New Mexico (NMSA 60-13-49), filed with the company license application.
  10. 10Insurance. Carry the required insurance. Workers' compensation coverage is required of all licensees by the Workers' Compensation Administration.

Published fees on this path total $273.76, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Exam fee · $68.88
  • Law / code exam
  • Exam fee · $68.88

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $10,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

How New Mexico licenses master plumbers

New Mexico master plumber · “MM-1 Plumbing contractor qualifying party (certificate of qualification); MM-98 Mechanical covers MM-1 through MM-4

Statewide license

Verified September 16, 2026· 5 sources

Issued by New Mexico Regulation and Licensing Department, Construction Industries Division (CID), Mechanical Bureau; applications and exams processed by PSI

New Mexico has no 'master plumber' title. The credential above journeyman is the MM-1 Plumbing contractor classification (install, alter, repair, service and maintain plumbing, fixtures and piping, hot-water heating up to 30 psi or 400,000 BTU/hour, fuel and solar piping, pools, septic and sewer lines, controls at 24 volts or less; natural gas piping requires MM-2), or the MM-98 Mechanical classification that bundles MM-1 through MM-4 and four mechanical specialties. CID issues the contractor's license to the business and a personal, non-transferable certificate of qualification to the qualifying party, the individual who documented four years of experience in the classification within the past ten years and passed the MM-1 trade exam and the Contractor's Business and Law exam, so this site maps the MM-1 qualifying party to the master level. Even with an MM-1 license, hands-on plumbing must be done by or under a certified JP journeyman. CID publishes reciprocity only for EE-98J electrical journeymen; no reciprocity, endorsement or exam waiver is published for plumbing qualifying parties or contractors, although NMSA 60-13-14(C) allows the division to enter into reciprocal agreements with states having equivalent requirements.

Moving to New MexicoLeaving New Mexico

Why Kansas has nothing to transfer

Kansas master plumber

Licensed by cities and counties

Verified September 16, 2026· 6 sources

Kansas issues no statewide master plumber or plumbing contractor license; the master credential exists only in county and city programs operating under K.S.A. 12-1508 and 12-1509. State law requires a master certificate to rest on a journeyman certificate held at least two years or four years of field experience, plus a 75% score on an ICC, IAPMO or Prometric standard master plumber exam, and makes a certificate earned that way valid proof of competency in every Kansas jurisdiction that licenses plumbers without additional examination. Sedgwick County/Wichita (MABCD) issues master plumber certificates ($35) on ICC K9F/557 Master Plumber with Gas or the IAPMO master exam; Johnson County uses the same ICC 557/KGF exam to qualify the individual behind a Class DP Plumbing Contractor license ($100 application plus $225 per license type); Topeka licenses trade contractors through a designated master with six hours of annual continuing education. None of the jurisdictions reviewed has a reciprocity agreement with another state, and MABCD states it 'does not reciprocate with state testing', so an out-of-state master plumber license transfers nothing except a qualifying ICC, IAPMO or Prometric score the applicant may already hold and documented experience. Lawrence and Kansas City, Kansas also license master plumbers, but their pages could not be retrieved in this pass.

How local licensing works in Kansas

How local licensing works. There is no state plumbing board. K.S.A. 12-1508 designates the ICC, IAPMO and Prometric standard exams for 'plumbing contractors and master and journeyman plumbers', and K.S.A. 12-1509 lets a county or city issue a master certificate of competency only after verifying that the applicant has held a valid journeyman certificate for at least two years or has at least four years of field experience, and has scored 75% on the standard master exam. That certificate 'shall be valid proof of competency for licensure, without additional examination, in any county or city of the state which requires licensure of plumbers'; each jurisdiction issues its own certificate for a uniform fee and requires 12 hours of continuing education biennially or six annually, half in code. Contracting (pulling permits and running a plumbing business) is licensed separately by each jurisdiction and generally requires a master-level qualifying individual plus insurance. The act is silent on out-of-state licenses; AG Op. 1999-42 says cities may not add licensure requirements beyond the act.

Sedgwick County and Wichita (MABCD). Plumbing master certificate ($35, Form 19A): must hold a plumbing journeyman certificate plus two years of field experience as a journeyman, or have four years of field experience, and score 75% or better on ICC K9F Master Plumber with Gas, ICC 557 Master Plumber with Gas or the IAPMO master exam, documented by an official passing letter. Certificates are good for two years and renew for $35 with three trade-specific and three general CEUs each year. MABCD 'does not reciprocate with state testing'; approved testing bodies are Block, Experior, Prometric, ICC and IAPMO, and MABCD no longer sponsors its own exams. Plumbing contractors are licensed separately by MABCD Contractor Licensing. Out-of-state treatment: an out-of-state master license is not accepted in lieu of the exam; a qualifying ICC 557-series or IAPMO master score plus documented experience is.

Johnson County. Does not license individuals. The master-level credential is the qualifying individual (QI) of a Class DP Plumbing Contractor license, who must present a verifiable passing score on ICC Master Plumbing with Gas (557/KGF); the county 'may be able to recognize ICC National exams if it can be verified to have a 75% or higher score.' The company pays a $100 application fee plus $225 per license type ($325 for one DP license), renews annually for $225 ($75 late fee from Feb. 1), and files general liability insurance, workers' compensation or a notarized waiver, and a Kansas Certificate of Good Standing if applicable; new applications are filed in person or by mail. A trade contractor's designated master must complete six hours of continuing education a year (three in the trade); licenses renew by December 14, fees are not prorated, and applications include the ICC passing certification or approved alternative education plus insurance and workers' compensation certificates (or a notarized exemption affidavit). V art. The applicant should obtain an official ICC (557/K9F/KGF series) or IAPMO master plumber passing letter (retesting through Pearson VUE or IAPMO if the origin exam was a state-specific test), document two years as a journeyman or four years of field experience, and apply to the first Kansas jurisdiction where they will work; under K.S.A. 12-1509(b) that certificate then supports licensure in every other Kansas county or city without another exam. A contractor license, insurance and, in Johnson County, a company-level Class DP license are separate requirements.

Moving to KansasLeaving Kansas

Common questions

Do I have to take the New Mexico master plumber exam if I'm licensed in Kansas?
Yes. New Mexico requires the trade exam on this path, plus a law or code exam.
What does it cost to get a New Mexico master plumber license from Kansas?
Published fees on this path total $273.76, not counting exam vendor fees or bonds.
Do my Kansas work hours count in New Mexico?
Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
Does it work the other way, from New Mexico to Kansas?
Not necessarily. Reciprocity is directed. Going from New Mexico to Kansas, the mechanism is not applicable.

Sources

  1. Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 (RLD compilation as of July 1, 2021) · NMSA 1978 §§ 60-13-14, 60-13-38, 60-13-49 · New Mexico Regulation and Licensing Department · Statute · verified September 16, 2026
  2. 14.5.5 NMAC - Construction Industries General Provisions: Fees · 14.5.5.8, 14.5.5.9 and 14.5.5.14 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 16, 2026
  3. 14.6.6 NMAC - Construction Industries Licensing: Classifications and Scopes (mechanical and plumbing) · 14.6.6.11 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 16, 2026
  4. State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 16, 2026
  5. NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 16, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related