Kansas to North Carolina: master plumber license reciprocity
Kansas does not issue a statewide master plumber license, so there is nothing to transfer. Here is North Carolina's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state master plumber or plumbing contractor without a waiver (all other states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
The Board's Applicant Information page states there are no license reciprocity agreements with any other state and that every applicant must meet North Carolina experience requirements and complete the applicable examinations, except the South Carolina technical-exam waiver and Neighbor State License Recognition for NC residents. G.S. 87-21(g) lets the Board license out-of-state plumbing contractors without written examination after finding qualifications substantially equivalent, but the Board has not published partner states other than the SC technical waiver. An inbound master plumber or plumbing contractor from any other state therefore applies to sit the examination: 4,000 hours of on-site installation, maintenance, service or repair of plumbing systems (up to 2,000 hours academic or technical training), which may have been earned in any state. After approval (currently about six weeks) the candidate takes the technical portion and the North Carolina business and law portion, then files the License Activation Form and fee within 45 days of passing. City or county journeyman or master cards are not a substitute for a state plumbing-contractor license.
PSI is named in the HVAC extract as the scheduler; the Applicant Information page says only 'exam provider' and lists seven NC testing centers. Separate application per classification. Restricted Limited Plumbing Contractor is a different exam (1,500 hours) and is not this path.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 42 days
What you must already have
- You must document at least 4,000 hours of qualifying work experience.Two years on-site full-time plumbing installation, maintenance, service or repair related to the class sought; up to 2,000 hours (45 quarter hours or 30 semester hours) may be academic or technical training directly related to plumbing. Out-of-state hours are accepted.
What you'll do to get licensed in North Carolina
- 1Exam fee. Pay the exam fee ($150). Fee, eligibility details, and processing steps are not published in a form we can list here. Please see the sources on this page to find out more..
- 2Trade exam. Pass the destination's trade exam. North Carolina Plumbing Contractor technical examination (Class I or Class II) administered by the Board's exam provider after application approval; must be taken within 90 days of eligibility. Open-book references are listed on the Board's Book Reference List..
- 3Law / code exam. Pass a law, rules, or code exam. North Carolina Business and Law examination required of contractor applicants (G.S. 87-21(b)(6)). Waived only under the Neighbor State Act for qualifying NC residents, not on the default path..
- 4License fee. Pay the license or certificate fee ($150). Fee, eligibility details, and processing steps are not published in a form we can list here. Please see the sources on this page to find out more..
- 5Background check. Complete a background check. Nationwide criminal background report ordered by the applicant from the Board's approved provider (HVAC extract of PHFP-1: Disahealthcare/CastleBranch package ST46); applicant pays the vendor.
- 6Other. Notarized experience verification (Form 1-C Applicant Employment History with W-2s/1099s when experience was not earned under an NC licensee), Form SSA-89 Social Security Number verification, and the current NC State Building Code / Laws & Rules / business-management books listed on the Book Reference List.
Published fees on this path total $300, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Exam fee · $150
- Trade exam
- Law / code exam
How North Carolina licenses master plumbers
North Carolina master plumber · “Plumbing Contractor (Class I or Class II)”
Statewide license
Issued by North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors
North Carolina has no license titled master plumber. Its highest plumbing credential is the person-held Plumbing Contractor license issued by the State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors under G.S. The individual who passes the two-part examination (technical plus business and law) is the licensee, may list the license in a firm name, and pays an annual license fee after activation. A first-time applicant needs 4,000 hours of on-site plumbing experience (up to half academic or technical training), and out-of-state hours are accepted. The Board states it has no license reciprocity with any state; the only technical-exam waiver is with South Carolina (NC business-law exam still required). North Carolina residents licensed in Georgia, South Carolina, Tennessee, Virginia or West Virginia may seek licensure without examination under the Neighbor State License Recognition Act (G.S. 93B-15.3). Restricted Limited Plumbing Contractor (1,500 hours, 2-inch and smaller exterior water/sewer/irrigation backflow) is a narrower contracting class, not a master equivalent.
Why Kansas has nothing to transfer
Kansas master plumber
Licensed by cities and counties
Kansas issues no statewide master plumber or plumbing contractor license; the master credential exists only in county and city programs operating under K.S.A. 12-1508 and 12-1509. State law requires a master certificate to rest on a journeyman certificate held at least two years or four years of field experience, plus a 75% score on an ICC, IAPMO or Prometric standard master plumber exam, and makes a certificate earned that way valid proof of competency in every Kansas jurisdiction that licenses plumbers without additional examination. Sedgwick County/Wichita (MABCD) issues master plumber certificates ($35) on ICC K9F/557 Master Plumber with Gas or the IAPMO master exam; Johnson County uses the same ICC 557/KGF exam to qualify the individual behind a Class DP Plumbing Contractor license ($100 application plus $225 per license type); Topeka licenses trade contractors through a designated master with six hours of annual continuing education. None of the jurisdictions reviewed has a reciprocity agreement with another state, and MABCD states it 'does not reciprocate with state testing', so an out-of-state master plumber license transfers nothing except a qualifying ICC, IAPMO or Prometric score the applicant may already hold and documented experience. Lawrence and Kansas City, Kansas also license master plumbers, but their pages could not be retrieved in this pass.
How local licensing works in Kansas
How local licensing works. There is no state plumbing board. K.S.A. 12-1508 designates the ICC, IAPMO and Prometric standard exams for 'plumbing contractors and master and journeyman plumbers', and K.S.A. 12-1509 lets a county or city issue a master certificate of competency only after verifying that the applicant has held a valid journeyman certificate for at least two years or has at least four years of field experience, and has scored 75% on the standard master exam. That certificate 'shall be valid proof of competency for licensure, without additional examination, in any county or city of the state which requires licensure of plumbers'; each jurisdiction issues its own certificate for a uniform fee and requires 12 hours of continuing education biennially or six annually, half in code. Contracting (pulling permits and running a plumbing business) is licensed separately by each jurisdiction and generally requires a master-level qualifying individual plus insurance. The act is silent on out-of-state licenses; AG Op. 1999-42 says cities may not add licensure requirements beyond the act.
Sedgwick County and Wichita (MABCD). Plumbing master certificate ($35, Form 19A): must hold a plumbing journeyman certificate plus two years of field experience as a journeyman, or have four years of field experience, and score 75% or better on ICC K9F Master Plumber with Gas, ICC 557 Master Plumber with Gas or the IAPMO master exam, documented by an official passing letter. Certificates are good for two years and renew for $35 with three trade-specific and three general CEUs each year. MABCD 'does not reciprocate with state testing'; approved testing bodies are Block, Experior, Prometric, ICC and IAPMO, and MABCD no longer sponsors its own exams. Plumbing contractors are licensed separately by MABCD Contractor Licensing. Out-of-state treatment: an out-of-state master license is not accepted in lieu of the exam; a qualifying ICC 557-series or IAPMO master score plus documented experience is.
Johnson County. Does not license individuals. The master-level credential is the qualifying individual (QI) of a Class DP Plumbing Contractor license, who must present a verifiable passing score on ICC Master Plumbing with Gas (557/KGF); the county 'may be able to recognize ICC National exams if it can be verified to have a 75% or higher score.' The company pays a $100 application fee plus $225 per license type ($325 for one DP license), renews annually for $225 ($75 late fee from Feb. 1), and files general liability insurance, workers' compensation or a notarized waiver, and a Kansas Certificate of Good Standing if applicable; new applications are filed in person or by mail. A trade contractor's designated master must complete six hours of continuing education a year (three in the trade); licenses renew by December 14, fees are not prorated, and applications include the ICC passing certification or approved alternative education plus insurance and workers' compensation certificates (or a notarized exemption affidavit). V art. The applicant should obtain an official ICC (557/K9F/KGF series) or IAPMO master plumber passing letter (retesting through Pearson VUE or IAPMO if the origin exam was a state-specific test), document two years as a journeyman or four years of field experience, and apply to the first Kansas jurisdiction where they will work; under K.S.A. 12-1509(b) that certificate then supports licensure in every other Kansas county or city without another exam. A contractor license, insurance and, in Johnson County, a company-level Class DP license are separate requirements.
Common questions
- Do I have to take the North Carolina master plumber exam if I'm licensed in Kansas?
- Yes. North Carolina requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a North Carolina master plumber license from Kansas?
- Published fees on this path total $300, not counting exam vendor fees or bonds.
- Do my Kansas work hours count in North Carolina?
- Yes. Documented out-of-state experience counts toward North Carolina's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 42 days.
- Does it work the other way, from North Carolina to Kansas?
- Not necessarily. Reciprocity is directed. Going from North Carolina to Kansas, the mechanism is not applicable.
Sources
- N.C.G.S. 87-21 - Definitions; contractors licensed by Board; examination; posting license · N.C.G.S. 87-21(a), (b), (g) · North Carolina General Assembly · Statute · verified September 16, 2026
- N.C.G.S. 93B-15.3 - Licensure recognition for individuals licensed in neighboring states · N.C.G.S. 93B-15.3 (S.L. 2025-61) · North Carolina General Assembly · Statute · verified September 16, 2026
- NC State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors - Applicant Information · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 16, 2026
- Application Packet for Persons Applying for Plumbing, Heating or Fuel Piping Contractor License (Form PHFP-1, 2026-06) · G.S. 87-21(g) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Form · verified September 16, 2026
- Exam Information 2026 - exam durations · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 16, 2026
- License Definitions - Contractor (2026-06) · North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Agency Page · verified September 16, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.