Mississippi to New Hampshire: master plumber license reciprocity
Mississippi does not issue a statewide master plumber license, so there is nothing to transfer. Here is New Hampshire's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Traditional application and New Hampshire master plumbing examination (non-qualifying jurisdictions)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
An out-of-state master plumber whose origin is not on OPLC's Plc 313.34 qualifying-jurisdiction list applies through the traditional Mechanical Licensing Board process. Saf-Mec 302.14 makes proof of origin-state licensure or certification enough to sit the New Hampshire plumbing licensing examination; it does not waive that exam. Plc 313.34's similarity standard for masters is journeyman experience plus an exam, which is the endorsement bar, not a confirmed hour table for the exam route. After passing, the applicant pays the $330 two-year master plumber fee. A separate $275 mechanical business entity fee is published for firms; treat entity licensure as distinct from the personal master license until the statute and applications page are re-read.
After a browser pass, add Endorsement agreements (exam waived) for listed master origins only; Reciprocity only if a signed exam-waiver agreement is published.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 14 days
What you must already have
- Your Mississippi license must be active and in good standing.
- Fee, eligibility details, and processing steps are not published in a form we can list here. Please see the sources on this page to find out more.
What you'll do to get licensed in New Hampshire
- 1Trade exam. Pass the destination's trade exam. New Hampshire master plumber licensing examination (Mechanical Licensing Board; Prov candidate bulletin linked from the board home page)..
- 2Application fee. Pay the application fee ($330). Master plumber application / two-year license fee (Plc 1002.25 and OPLC Mechanical Safety and Licensing Board fee table)..
- 3Business license. Obtain a business license ($275) (if applicable). Mechanical business entity application/renewal/reinstatement fee ($275, Plc 1002.25 / OPLC fee table)..
- 4Other. Demonstrate proof of origin-state plumber licensure or certification with the application (Saf-Mec 302.14)..
Published fees on this path total $330, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license · $275 · if applicable
How New Hampshire licenses master plumbers
New Hampshire master plumber · “Master Plumber”
Statewide license
Issued by New Hampshire Mechanical Licensing Board, Office of Professional Licensure and Certification (OPLC)
New Hampshire issues a statewide Master Plumber license through the same OPLC Mechanical Licensing Board that licenses journeyman and trainee plumbers. The published two-year master plumber fee is $330 (OPLC fee table; Plc 1002.25). RSA 153 lets the board enter reciprocity agreements for plumbers whose requirements are equivalent or greater; no signed master-plumber partner list was confirmed, so none are recorded. Out-of-state masters who are not in a qualifying jurisdiction remain eligible for the New Hampshire master plumbing examination upon proof of licensure (Saf-Mec 302.14).
Why Mississippi has nothing to transfer
Mississippi master plumber
Licensed by cities and counties
Mississippi does not issue a personal master plumber license. The state-level plumbing credential is the Mississippi State Board of Contractors (MSBOC) contractor license: the commercial Mechanical major classification or its 'Plumbing (Test Required)' specialty (required on commercial jobs over $50,000; application and renewal $400, $300,000/$600,000 liability insurance, CPA-reviewed financial statement showing $50,000 net worth for Mechanical or $20,000 for the Plumbing specialty) or Residential Plumbing / Residential Mechanical (required for residential plumbing subcontracting over $10,000 in remodeling or $50,000 new construction; application $50, renewal $100). The license is issued to the business through a Certificate of Responsibility with a named qualifying party who passes the open-book PSI Plumbing (or Residential Plumbing) trade exam and the mandatory Mississippi Law and Business Management exam, so a master plumber who only wants to work for an employer has nothing to transfer to at the state level; the personal master credential exists only in cities such as Southaven (Master trade license, $100, which itself requires an active MSBOC license, a $10,000 bond and liability insurance) and Gulfport (contractor license issued to the qualifying party, $100). MSBOC waives its plumbing trade exam, for $50 per exam, for qualifying parties who hold a current license obtained by examination from the Alabama Plumbers and Gas Fitters Examining Board (commercial Plumbing exam only), the Ohio Construction Industry Licensing Board (Plumbing), the South Carolina Residential Builders Commission (Residential Plumbing, no discipline in three years) or the Tennessee Board for Licensing Contractors (all exams, no discipline in the last year); the Alabama General Contractors Board, Arkansas and Louisiana agreements expressly exclude plumbing, and the Business and Law exam is never waived.
How local licensing works in Mississippi
State contractor license (business). MSBOC issues commercial and residential contractor licenses to companies through a Certificate of Responsibility. The commercial Mechanical major classification 'involves all aspects of heating, cooling, refrigeration and associated equipment piping and ductwork as well as plumbing work' and carries 15 specialties including Plumbing, Process Piping, Underground Utilities, Fueling Systems and Irrigation Systems (all test required); an applicant may instead take only the Plumbing specialty. The qualifying party (owner, officer or responsible managing employee) passes the PSI open-book trade exam and the Mississippi Law and Business Management exam; fees are $400 application ($400 annual renewal, $100 per additional classification), general liability insurance of $300,000 per occurrence / $600,000 aggregate, and a CPA-reviewed financial statement showing net worth of $50,000 for a major classification or $20,000 for a specialty. Residential Plumbing (Residential Plumbing exam) and Residential Mechanical (Residential HVAC and Residential Plumbing exams) require the Law and Business exam, a $50 application fee ($100 per additional classification, $100 renewal) and proof of liability insurance with no minimum.
MSBOC exam waivers for out-of-state qualifying parties. Reciprocity 'applies to waiver of a trade exam requirement only' ($50 per exam waived, plus a $25 verification fee) after the origin board completes MSBOC's Reciprocity Verification Form; the applicant must have held the origin license for one year and passed that board's exam. Plumbing waivers are available for the Alabama Plumbers and Gas Fitters Examining Board (commercial Plumbing exam only; current license, Alabama exam taken), Ohio CILB (Plumbing; no discipline in the last year), the South Carolina Residential Builders Commission (Residential Plumbing; no discipline in three years) and Tennessee ('the only state that waives Mechanical and Plumbing'; no discipline in the last year). The Alabama General Contractors Board entry waives 'all exams but Mechanical & Plumbing', Arkansas excludes 'any type of Mechanical (i.e. Plumbing, Boilers, Process Piping, HVAC)', and Louisiana 'CAN WAIVE HVAC BUT NOT MECHANICAL OR PLUMBING'; Georgia, North Carolina, the South Carolina Contractors Licensing Board, Florida and California agreements do not reach plumbing. Separately, Form UROL under the Universal Recognition of Occupational Licenses Act (Miss. Code 73-50-2) waives the trade exam for an individual who has established Mississippi residency and held a similar license in any state for at least one year, and the Military Family Freedom Act (73-50-1) applies to military members and families. Every path still requires the Business and Law exam and full application review.
Southaven. Master trade license $100: application, photo ID of the license qualifier, certificate of liability insurance, a $10,000 general surety bond in favor of the city, an active MSBOC contractor's license certificate and the company EIN. An out-of-state applicant without an MSBOC license must provide a letter of good standing from a municipality where their license is active and may not take residential projects or commercial projects over $50,000; reciprocity questions are referred to MSBOC. Confirmed for mechanical and electrical on 2026-09-15; the plumbing card was not separately confirmed because the form could not be reopened on 2026-09-16.
Gulfport. Contractor license issued to the qualifying party ($100, waived with an MSBOC Certificate of Responsibility): notarized application, current MSBOC license if any, five reference letters (waived with an MSBOC license), $100,000/$300,000 liability insurance naming the city, home-jurisdiction privilege license and photo ID. No reciprocity provision.
Jackson, Hattiesburg, Biloxi, Tupelo. Master plumber programs in these cities could not be verified from an official page in this pass (Jackson redirected, Hattiesburg plumbing ordinance 404); contact each building department.
- Southaven (Building Department)
- Gulfport (Building Code Services)
- Jackson
- Hattiesburg
Common questions
- Do I have to take the New Hampshire master plumber exam if I'm licensed in Mississippi?
- Yes. New Hampshire requires the trade exam on this path.
- What does it cost to get a New Hampshire master plumber license from Mississippi?
- Published fees on this path total $330, not counting exam vendor fees or bonds.
- Do my Mississippi work hours count in New Hampshire?
- Yes. Documented out-of-state experience counts toward New Hampshire's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 14 days.
- Does it work the other way, from New Hampshire to Mississippi?
- Not necessarily. Reciprocity is directed. Going from New Hampshire to Mississippi, the mechanism is not applicable.
Sources
- NH OPLC - Mechanical Licensing Board (who we regulate; plumber licenses) · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- NH OPLC - License Fees for the Mechanical Safety and Licensing Board · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- OPLC - Reciprocity Licensing (HB 594 overview) · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- NH OPLC - New Changes for Reciprocity in New Hampshire (endorsement qualifying jurisdictions by board) · RSA 310:17; Plc 313.34 · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- N.H. Code Admin. R. Plc 1002.25 - Mechanical Licensing Board application and licensing fees · Plc 1002.25 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
- N.H. Code Admin. R. Plc 313.34 - Substantially similar requirements for Mechanical Licensing Board professions · Plc 313.34 (eff. 5-3-24, #13954); Plc 313.01; Plc 313.11 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
- RSA Chapter 153 - Fire Safety; Mechanical Licensing Board (plumber and fuel gas licensing) · RSA 153:16-b; RSA 153:27-a; RSA 153:28; RSA 153:36, VII · New Hampshire General Court · Statute · verified September 16, 2026
- RSA 310:17 - License Reciprocity (OPLC endorsement of out-of-state licenses) · RSA 310:17 (2023, 111:1, eff. Aug. 27, 2023) · New Hampshire General Court · Statute · verified September 16, 2026
- N.H. Code Admin. R. Saf-Mec 300 - Initial fuel gas fitting and plumbing licensing · Saf-Mec 302.14 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.