LicensebyState

Nevada to Connecticut: master plumber license reciprocity

No credit· Start overVerified September 16, 2026· 5 sources

Nevada does not issue a statewide master plumber license, so there is nothing to transfer. Here is Connecticut's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Contractor (P-1) by equivalent out-of-state license (all states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A master plumber or plumbing contractor licensed in any other state applies under DCP's 'Plumbing Contractor - Equivalent Out of State License' path. DCP reviews a single out-of-state license for equivalency to the P-1: the hours table requires 576 classroom hours matching Exhibit A and 12,000 on-the-job hours (8,000 plus two years / 4,000 as a licensed journeyperson). The applicant submits a copy of the license, official license verification, the laws and regulations that set the requirements met to obtain it, and the scope of work, with the non-refundable $150 application fee. If approved, CGS 20-333 and 20-334a(a)(1) still require the Connecticut contractor examination before the $150 initial license is issued—the origin license does not waive the trade exam. An applicant whose license is not found equivalent is not approved on this path and must document comparable journeyman service and training instead (CGS 20-334a(a)(1)(A)). No named reciprocal partners appear on the plumbing contractor out-of-state page.

CLASSROOM-HOUR CONFLICT on the contractor out-of-state page: the example sentence says a P-1 equivalent license 'must have required 720 classroom hours and 12,000 hours of on the job training', while the hours table on the same page lists P-1 classroom hours as 576 (with 12,000 OJT). CE, reinstatement and the annual expiration month live on the unfetched Plumbing-and-Pipefitting-Licensing hub.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Count toward eligibility

What you must already have

  • Your Nevada license must be active and in good standing.
  • The out-of-state license must be equivalent to the P-1: 576 classroom hours matching Exhibit A and 12,000 OJT hours (8,000 plus two years / 4,000 as a licensed journeyperson)Only one out-of-state license is reviewed. The same page's example paragraph says 720 classroom hours; use the table (576) unless DCP confirms otherwise. Limited contractor tables: P-7 8,000/180, J-1 8,000/288, J-3 8,000/144.
  • You must document at least 12,000 hours of qualifying work experience.8,000 hours plus 2 years (4,000 hours) working as a licensed journeyperson. CGS 20-334a(a)(1)(A): journeyman service outside Connecticut counts if DCP finds it comparable to similar service in this state.

What you'll do to get licensed in Connecticut

  1. 1Application fee. Pay the application fee ($150). Contractor application fee, non-refundable (CGS 20-333); DCP out-of-state page restates that application fees are nonrefundable.
  2. 2Other. Copy of the out-of-state license, official license verification, the laws/regulations listing the requirements met to obtain it, and the scope of work for that license (one origin license only).
  3. 3Trade exam. Pass the destination's trade exam. Connecticut P-1 Unlimited Plumbing Contractor licensure examination after DCP determines eligibility (scope of work: two years as an unlimited licensed journeyperson or equivalent, then the license examination; CGS 20-333 / 20-334a)..
  4. 4Exam fee. Pay the exam fee. Examination vendor fee per portion, due at exam registration..
  5. 5Law / code exam. Pass a law, rules, or code exam (if applicable). Fee, eligibility details, and processing steps are not published in a form we can list here. Please see the sources on this page to find out more..
  6. 6License fee. Pay the license or certificate fee ($150). Initial license fee for a contractor's license after passing the exam (CGS 20-335); renews annually for $150. Plumbing expiration month not confirmed on pages retrieved..

Published fees on this path total $300, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Exam fee
  • Law / code exam · if applicable

How Connecticut licenses master plumbers

Connecticut master plumber · “P-1 Unlimited Plumbing Contractor

Statewide license

Verified September 16, 2026· 4 sources

Issued by Connecticut Department of Consumer Protection, Occupational and Professional Licensing

Connecticut has no license titled 'master plumber'; the top-tier personal credential is the P-1 Unlimited Plumbing Contractor, issued by DCP to an individual and permitting all plumbing and piping work under CGS 20-330 (permits and contracting with the public). Limited contractor classes cover narrower scopes (J-1, J-3, P-7, P-9, PP-1, SP-1). A new P-1 applicant needs two years as an unlimited licensed journeyperson or equivalent experience and training; the out-of-state equivalency table is 12,000 OJT hours (8,000 plus two years / 4,000) and 576 classroom hours matching Exhibit A. CGS 20-334a(a)(1)(A) lets out-of-state journeyman service count if DCP finds it comparable, and still requires the contractor examination. CGS 20-333a would allow an exam waiver only if the origin state reciprocates; the P-1 out-of-state page names no partners. Fees are a $150 application fee and a $150 initial/renewal license fee; licenses expire annually.

Moving to ConnecticutLeaving Connecticut

Why Nevada has nothing to transfer

Nevada master plumber · “C-1 Plumbing and Heating Contractor (business license with qualified individual)

No individual license at this level

Verified September 16, 2026· 7 sources

Issued by Nevada State Contractors Board (contractor licensing only)

Nevada does not issue a master plumber license to individuals, and no county or city was found to issue a master-level plumbing card; Clark County recognizes a 'plumbing qualified individual', which is simply the person who qualifies a contractor's C-1 license with the State Board. The state-level credential is a classification C-1 Plumbing and Heating Contracting license from the Nevada State Contractors Board (NSCB), issued to a sole proprietor, partnership, corporation or LLC and qualified by a named individual rather than held by the plumber personally. An out-of-state master plumber who only wants to work for an employer needs no Nevada license at all (apart from the local journeyman card in Clark County and Reno). To contract, the qualifying individual must show four years of experience as a journeyman, foreman, supervising employee or contractor within the past 15 years (NRS 624.260), pass the PSI-administered Nevada Business and Law exam and the C-1 trade exam within six months of filing (three attempts each), and the business must pay the $300 application fee and $600 biennial license fee, submit a financial statement, fingerprints and background check, and post a bond of $1,000 to $500,000 set by the Board, plus the Residential Recovery Fund assessment ($200 to $1,000) if it does residential work. Under licensure by endorsement (NAC 624.600 and 624.615) the C-1 trade exam and the experience certification are waived for a qualified individual who has held an active license, as the same qualified individual, with no discipline or pending action for the past four years in Arizona (CR-77 Plumbing Including Solar), California (C-36 Plumbing together with C-4 Boiler, Hot Water Heating and Steam Fitting) or Tennessee (CMC Full Mechanical Contractor); a Florida CF Plumbing Contractor gets experience credit but must pass the Nevada C-1 trade exam; the Business and Law exam is never waived. The NSCB equivalency charts contain no Utah chart and no C-1 row for Connecticut, Louisiana, North Carolina, South Carolina, New Mexico, Hawaii, Alabama or West Virginia.

Moving to NevadaLeaving Nevada

Common questions

Do I have to take the Connecticut master plumber exam if I'm licensed in Nevada?
Yes. Connecticut requires the trade exam on this path.
What does it cost to get a Connecticut master plumber license from Nevada?
Published fees on this path total $300, not counting exam vendor fees or bonds.
Do my Nevada work hours count in Connecticut?
Yes. Documented out-of-state experience counts toward Connecticut's eligibility requirements.
Does it work the other way, from Connecticut to Nevada?
Not necessarily. Reciprocity is directed. Going from Connecticut to Nevada, the mechanism is not applicable.

Sources

  1. Connecticut General Statutes Chapter 393 - Occupational Licensing (Electrical, Plumbing and Piping, Heating, Cooling...) · CGS §§ 20-330, 20-333, 20-333a, 20-334a, 20-335 · Connecticut General Assembly · Statute · verified September 16, 2026
  2. Connecticut DCP - Plumbing Contractor: Equivalent Out of State License · Connecticut Department of Consumer Protection · Agency Page · verified September 16, 2026
  3. Connecticut DCP Exhibit A - Required Courses for Plumbing License Types · Connecticut Department of Consumer Protection · Form · verified September 16, 2026
  4. Connecticut DCP - Plumbing and Pipefitting Licensing (renewal, reinstatement and CE hub linked from the contractor out-of-state page) · Connecticut Department of Consumer Protection · Agency Page · verified September 16, 2026
  5. Connecticut DCP - Plumbing Licenses and Scope of Work · Connecticut Department of Consumer Protection · Agency Page · verified September 16, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related