Nevada to New Hampshire: master plumber license reciprocity
Nevada does not issue a statewide master plumber license, so there is nothing to transfer. Here is New Hampshire's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Traditional application and New Hampshire master plumbing examination (non-qualifying jurisdictions)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
An out-of-state master plumber whose origin is not on OPLC's Plc 313.34 qualifying-jurisdiction list applies through the traditional Mechanical Licensing Board process. Saf-Mec 302.14 makes proof of origin-state licensure or certification enough to sit the New Hampshire plumbing licensing examination; it does not waive that exam. Plc 313.34's similarity standard for masters is journeyman experience plus an exam, which is the endorsement bar, not a confirmed hour table for the exam route. After passing, the applicant pays the $330 two-year master plumber fee. A separate $275 mechanical business entity fee is published for firms; treat entity licensure as distinct from the personal master license until the statute and applications page are re-read.
After a browser pass, add Endorsement agreements (exam waived) for listed master origins only; Reciprocity only if a signed exam-waiver agreement is published.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 14 days
What you must already have
- Your Nevada license must be active and in good standing.
- Fee, eligibility details, and processing steps are not published in a form we can list here. Please see the sources on this page to find out more.
What you'll do to get licensed in New Hampshire
- 1Trade exam. Pass the destination's trade exam. New Hampshire master plumber licensing examination (Mechanical Licensing Board; Prov candidate bulletin linked from the board home page)..
- 2Application fee. Pay the application fee ($330). Master plumber application / two-year license fee (Plc 1002.25 and OPLC Mechanical Safety and Licensing Board fee table)..
- 3Business license. Obtain a business license ($275) (if applicable). Mechanical business entity application/renewal/reinstatement fee ($275, Plc 1002.25 / OPLC fee table)..
- 4Other. Demonstrate proof of origin-state plumber licensure or certification with the application (Saf-Mec 302.14)..
Published fees on this path total $330, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license · $275 · if applicable
How New Hampshire licenses master plumbers
New Hampshire master plumber · “Master Plumber”
Statewide license
Issued by New Hampshire Mechanical Licensing Board, Office of Professional Licensure and Certification (OPLC)
New Hampshire issues a statewide Master Plumber license through the same OPLC Mechanical Licensing Board that licenses journeyman and trainee plumbers. The published two-year master plumber fee is $330 (OPLC fee table; Plc 1002.25). RSA 153 lets the board enter reciprocity agreements for plumbers whose requirements are equivalent or greater; no signed master-plumber partner list was confirmed, so none are recorded. Out-of-state masters who are not in a qualifying jurisdiction remain eligible for the New Hampshire master plumbing examination upon proof of licensure (Saf-Mec 302.14).
Why Nevada has nothing to transfer
Nevada master plumber · “C-1 Plumbing and Heating Contractor (business license with qualified individual)”
No individual license at this level
Issued by Nevada State Contractors Board (contractor licensing only)
Nevada does not issue a master plumber license to individuals, and no county or city was found to issue a master-level plumbing card; Clark County recognizes a 'plumbing qualified individual', which is simply the person who qualifies a contractor's C-1 license with the State Board. The state-level credential is a classification C-1 Plumbing and Heating Contracting license from the Nevada State Contractors Board (NSCB), issued to a sole proprietor, partnership, corporation or LLC and qualified by a named individual rather than held by the plumber personally. An out-of-state master plumber who only wants to work for an employer needs no Nevada license at all (apart from the local journeyman card in Clark County and Reno). To contract, the qualifying individual must show four years of experience as a journeyman, foreman, supervising employee or contractor within the past 15 years (NRS 624.260), pass the PSI-administered Nevada Business and Law exam and the C-1 trade exam within six months of filing (three attempts each), and the business must pay the $300 application fee and $600 biennial license fee, submit a financial statement, fingerprints and background check, and post a bond of $1,000 to $500,000 set by the Board, plus the Residential Recovery Fund assessment ($200 to $1,000) if it does residential work. Under licensure by endorsement (NAC 624.600 and 624.615) the C-1 trade exam and the experience certification are waived for a qualified individual who has held an active license, as the same qualified individual, with no discipline or pending action for the past four years in Arizona (CR-77 Plumbing Including Solar), California (C-36 Plumbing together with C-4 Boiler, Hot Water Heating and Steam Fitting) or Tennessee (CMC Full Mechanical Contractor); a Florida CF Plumbing Contractor gets experience credit but must pass the Nevada C-1 trade exam; the Business and Law exam is never waived. The NSCB equivalency charts contain no Utah chart and no C-1 row for Connecticut, Louisiana, North Carolina, South Carolina, New Mexico, Hawaii, Alabama or West Virginia.
Common questions
- Do I have to take the New Hampshire master plumber exam if I'm licensed in Nevada?
- Yes. New Hampshire requires the trade exam on this path.
- What does it cost to get a New Hampshire master plumber license from Nevada?
- Published fees on this path total $330, not counting exam vendor fees or bonds.
- Do my Nevada work hours count in New Hampshire?
- Yes. Documented out-of-state experience counts toward New Hampshire's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 14 days.
- Does it work the other way, from New Hampshire to Nevada?
- Not necessarily. Reciprocity is directed. Going from New Hampshire to Nevada, the mechanism is not applicable.
Sources
- NH OPLC - Mechanical Licensing Board (who we regulate; plumber licenses) · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- NH OPLC - License Fees for the Mechanical Safety and Licensing Board · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- OPLC - Reciprocity Licensing (HB 594 overview) · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- NH OPLC - New Changes for Reciprocity in New Hampshire (endorsement qualifying jurisdictions by board) · RSA 310:17; Plc 313.34 · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- N.H. Code Admin. R. Plc 1002.25 - Mechanical Licensing Board application and licensing fees · Plc 1002.25 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
- N.H. Code Admin. R. Plc 313.34 - Substantially similar requirements for Mechanical Licensing Board professions · Plc 313.34 (eff. 5-3-24, #13954); Plc 313.01; Plc 313.11 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
- RSA Chapter 153 - Fire Safety; Mechanical Licensing Board (plumber and fuel gas licensing) · RSA 153:16-b; RSA 153:27-a; RSA 153:28; RSA 153:36, VII · New Hampshire General Court · Statute · verified September 16, 2026
- RSA 310:17 - License Reciprocity (OPLC endorsement of out-of-state licenses) · RSA 310:17 (2023, 111:1, eff. Aug. 27, 2023) · New Hampshire General Court · Statute · verified September 16, 2026
- N.H. Code Admin. R. Saf-Mec 300 - Initial fuel gas fitting and plumbing licensing · Saf-Mec 302.14 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.