Wyoming to New Hampshire: master plumber license reciprocity
Wyoming does not issue a statewide master plumber license, so there is nothing to transfer. Here is New Hampshire's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Traditional application and New Hampshire master plumbing examination (non-qualifying jurisdictions)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
An out-of-state master plumber whose origin is not on OPLC's Plc 313.34 qualifying-jurisdiction list applies through the traditional Mechanical Licensing Board process. Saf-Mec 302.14 makes proof of origin-state licensure or certification enough to sit the New Hampshire plumbing licensing examination; it does not waive that exam. Plc 313.34's similarity standard for masters is journeyman experience plus an exam, which is the endorsement bar, not a confirmed hour table for the exam route. After passing, the applicant pays the $330 two-year master plumber fee. A separate $275 mechanical business entity fee is published for firms; treat entity licensure as distinct from the personal master license until the statute and applications page are re-read.
After a browser pass, add Endorsement agreements (exam waived) for listed master origins only; Reciprocity only if a signed exam-waiver agreement is published.
At a glance
- Trade exam
- Required
- Law / code exam
- Not required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 14 days
What you must already have
- Your Wyoming license must be active and in good standing.
- Fee, eligibility details, and processing steps are not published in a form we can list here. Please see the sources on this page to find out more.
What you'll do to get licensed in New Hampshire
- 1Trade exam. Pass the destination's trade exam. New Hampshire master plumber licensing examination (Mechanical Licensing Board; Prov candidate bulletin linked from the board home page)..
- 2Application fee. Pay the application fee ($330). Master plumber application / two-year license fee (Plc 1002.25 and OPLC Mechanical Safety and Licensing Board fee table)..
- 3Business license. Obtain a business license ($275) (if applicable). Mechanical business entity application/renewal/reinstatement fee ($275, Plc 1002.25 / OPLC fee table)..
- 4Other. Demonstrate proof of origin-state plumber licensure or certification with the application (Saf-Mec 302.14)..
Published fees on this path total $330, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license · $275 · if applicable
How New Hampshire licenses master plumbers
New Hampshire master plumber · “Master Plumber”
Statewide license
Issued by New Hampshire Mechanical Licensing Board, Office of Professional Licensure and Certification (OPLC)
New Hampshire issues a statewide Master Plumber license through the same OPLC Mechanical Licensing Board that licenses journeyman and trainee plumbers. The published two-year master plumber fee is $330 (OPLC fee table; Plc 1002.25). RSA 153 lets the board enter reciprocity agreements for plumbers whose requirements are equivalent or greater; no signed master-plumber partner list was confirmed, so none are recorded. Out-of-state masters who are not in a qualifying jurisdiction remain eligible for the New Hampshire master plumbing examination upon proof of licensure (Saf-Mec 302.14).
Why Wyoming has nothing to transfer
Wyoming master plumber
Licensed by cities and counties
Wyoming issues no master plumber or plumbing contractor license; the State Fire Marshal's electrical program is the only statewide trade licensing and it has no plumbing component. The master credential exists only in city ordinances: Cheyenne's Master (8,000 apprentice hours plus 6,000 journeyman hours and an ICC/NICET/NASCLA exam), Casper's Master Plumber (apprenticeship or four years plus five years as a journeyman or master, ICC G27-N), Laramie's master plumbing certificate of qualification (three years beyond journeyman, city exam), Gillette's Master Plumber (five years plus the ICC exam), Sheridan's Master Plumber (2018 ICC G27 with Gas) and Jackson's Master Certificate of Qualification (ICC G-series National Standard exam plus time in service). In every one of these cities a plumbing contractor must be or employ a master of record, and the contractor license is a separate business license with fees from $150 to $300 plus insurance or bond. No city accepts an out-of-state master license: Casper, Gillette and Jackson reciprocate only with other Wyoming jurisdictions, Sheridan refuses all outside licenses, Cheyenne's Board has undefined discretion, and Laramie may waive its exam for an equivalent certificate from any governmental agency. Rock Springs registers contractors for $125 with proof of insurance and tests nobody.
How local licensing works in Wyoming
How local licensing works. There is no state plumbing board; each city's ordinance defines its own master-level license and the plumbing contractor license it qualifies. The reciprocity statute the cities cite reaches only other Wyoming jurisdictions, and no city publishes a route that honours another state's master plumber or plumbing contractor license.
Cheyenne. A Master level craft employee license (12.1.8) requires 4 years/8,000 hours documented as an apprentice (or certified equivalent training) plus 3 years/6,000 hours documented as a journeyman and passing results on a current ICC, NICET or NASCLA exam from the Board's list. Fees are $50 application plus $50 initial and $25 renewal. A Plumbing (C1) contractor - covering plumbing and pipe-fitting systems other than fire sprinklers - may be licensed only if it always employs a full-time master or qualified supervisor of that class, who may represent only one contractor (13.0); the C1 tested contractor license costs $50 application plus $200 initial and $75 renewal. Reciprocity is at the Board's discretion (3.3.2/3.5.1) with no published partner list and a statute limiting it to Wyoming jurisdictions.
Casper. Master Plumber ($75 new, $37.50 renewal) requires a federally recognized plumbing apprenticeship or four years in a Casper-licensed plumbing shop plus five years as a journeyman or master plumber in a Casper-licensed shop, and proof of passing ICC G27-N or equivalent. A Plumbing Contractor license ($300/$150) covers any plumbing work including steam and water boilers, must be backed by a full-time licensed master plumber, and requires $250,000/$500,000/$250,000 liability insurance. Reciprocal Master/Journeyman licenses ($50/$25) are limited to holders of a current license from another Wyoming jurisdiction with comparable testing.
Laramie. A master plumbing certificate of qualification requires three years as a journeyman (Table 15.24.020-1) and the building official's examination ($5 per attempt), or is issued without exam on presentation of a certificate from another governmental agency whose exam the board of examiners finds at least equal. All plumbing contractor work must be performed by or under the supervision of a master plumbing certificate holder, who must be available to the building official within 24 hours. The Plumbing Contractor license costs $300 new and $35 renewal and requires a business location and telephone, a $500,000 combined single limit insurance certificate naming the City and a Wyoming Workers' Compensation certificate of good standing; licenses and certificates run January 1 - December 31.
Gillette. Master Plumber ($50 new, $50 renewal) requires five years of approved experience and passing ICC examination results. A Class D Plumbing Contractor ($150/$50) works under the 2024 IPC, may not do gas pipefitting on its plumbing license, and must designate a Master of Record - a full-time employee or owner licensed as a Master Plumber, able to reach any job site within 48 hours and replaced within 60 days if they leave. Reciprocity (5-III-1(d)) is limited to active, good-standing licenses from other Wyoming local governments, with testing waived on proof of the ICC plumbing or contractor exam and no fee charged.
Sheridan. Master Plumber ($50 new, $50 annual) acts as Master of Record for a plumbing company, must show they meet the Plumbing Contractor requirements (2018 ICC G27 exam, four-year journeyman plumber verification on Form JP, two-year project verification on Form A) and pass the 2018 ICC G27 Master Plumber with Gas exam. The Plumbing Contractor license ($200 new, $200 annual) also needs a $1,000,000 liability insurance certificate and a $10,000 license and permit bond, and every plumbing business must hold both a contractor license and a Master of Record. The City does not accept licenses from other cities, towns, counties or states.
Jackson. The Master Certificate of Qualification card is the prerequisite for a Plumbing Contractor license and is the only individual card the Town still issues. It is obtained by passing the ICC National Standard trades exam through Pearson VUE (only G-series tests based on the 2018 I-Codes are accepted) and meeting the time-in-service requirement in JMC 15.36.050, or by reciprocity for someone 'currently licensed and in good standing in a Wyoming jurisdiction that meets our licensing requirements'. Applications go through the SmartGov portal with a 30-day processing window; the contractor license then requires the bond and insurance in JMC 15.36.035 and renews every December 31, while the Master COQ card renews triennially with six hours of ICC-accredited continuing education. Licensing covers only work inside Town limits.
Rock Springs. Contractors register with the Building Inspection Office ($125 fee and a certificate of insurance naming the City) before working; no master license or exam exists.
- Cheyenne (Contractor Licensing Board / Building Safety Department)
- Casper (Community Development Department)
- Laramie (Code Administration)
- Gillette (Building Inspection Division / Board of Examiners)
- Sheridan (Building Division)
- Jackson (Planning & Building Department)
- Rock Springs (Building Inspection Office)
Common questions
- Do I have to take the New Hampshire master plumber exam if I'm licensed in Wyoming?
- Yes. New Hampshire requires the trade exam on this path.
- What does it cost to get a New Hampshire master plumber license from Wyoming?
- Published fees on this path total $330, not counting exam vendor fees or bonds.
- Do my Wyoming work hours count in New Hampshire?
- Yes. Documented out-of-state experience counts toward New Hampshire's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 14 days.
- Does it work the other way, from New Hampshire to Wyoming?
- Not necessarily. Reciprocity is directed. Going from New Hampshire to Wyoming, the mechanism is not applicable.
Sources
- NH OPLC - Mechanical Licensing Board (who we regulate; plumber licenses) · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- NH OPLC - License Fees for the Mechanical Safety and Licensing Board · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- OPLC - Reciprocity Licensing (HB 594 overview) · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- NH OPLC - New Changes for Reciprocity in New Hampshire (endorsement qualifying jurisdictions by board) · RSA 310:17; Plc 313.34 · New Hampshire Office of Professional Licensure and Certification (OPLC) · Agency Page · verified September 16, 2026
- N.H. Code Admin. R. Plc 1002.25 - Mechanical Licensing Board application and licensing fees · Plc 1002.25 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
- N.H. Code Admin. R. Plc 313.34 - Substantially similar requirements for Mechanical Licensing Board professions · Plc 313.34 (eff. 5-3-24, #13954); Plc 313.01; Plc 313.11 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
- RSA Chapter 153 - Fire Safety; Mechanical Licensing Board (plumber and fuel gas licensing) · RSA 153:16-b; RSA 153:27-a; RSA 153:28; RSA 153:36, VII · New Hampshire General Court · Statute · verified September 16, 2026
- RSA 310:17 - License Reciprocity (OPLC endorsement of out-of-state licenses) · RSA 310:17 (2023, 111:1, eff. Aug. 27, 2023) · New Hampshire General Court · Statute · verified September 16, 2026
- N.H. Code Admin. R. Saf-Mec 300 - Initial fuel gas fitting and plumbing licensing · Saf-Mec 302.14 · New Hampshire General Court (Administrative Rules) · Admin Rule · verified September 16, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.