LicensebyState

Wyoming to South Carolina: master plumber license reciprocity

No credit· Start overVerified September 16, 2026· 5 sources

Wyoming does not issue a statewide master plumber license, so there is nothing to transfer. Here is South Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Licensure by examination with credit for out-of-state experience (states without a PB waiver exam)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A plumbing contractor from a state (or classification) whose exam is not listed for PB on the Board's waiver list is told: 'you are not eligible for waiver/reciprocity. You will be required to take the SC exams.' The applicant passes the South Carolina Plumbing technical exam through PSI and the South Carolina Business Management & Law for Commercial Contractors exam, then files the Qualifying Party application (Doc. 168) with proof of at least 2 years of full-time work experience performed within the past 5 years in the plumbing classification, which may have been earned in any state and should primarily reflect commercial work (a PHCC Academy of North Carolina apprenticeship certificate covering plumbing is an alternative). The business files the Mechanical Contractor license application with the $350 licensure fee and a financial statement (or surety bond) meeting the group limit it wants. Section 40-11-290 separately allows the Board to exempt the technical exam for an applicant who verifies passing an essentially identical exam in another state even without a reciprocal agreement, but the Board's published waiver list and instructions do not describe a process for invoking it outside the listed exams. Ohio, Georgia and other states named on the cover of the 2019 waiver PDF are not treated as plumbing Reciprocity partners here because no PB exam mapping was recorded on the extract used for this file.

PSI exam fees are paid directly to PSI and are not published on LLR's pages. The Board's licensure page shows a $350 licensure fee but no separate qualifying-party application fee. The current Mechanical Group financial thresholds on the licensure page (Group 2: $100,000 per job, $10,000 working capital or $15,000 net worth, $15,000 bond) differ from the 2019 waiver document's table; the web page is treated as current. Typical timeline is an estimate; LLR publishes no processing time. Residential specialty plumber fees and exam-waiver states were not confirmed (resplumb.aspx blocked).

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 90 days

What you must already have

  • At least 2 years of full-time work experience in the plumbing classification, performed within the past 5 years, documented on Work Experience Affidavits (Doc. 167); out-of-state experience is accepted. A PHCC Academy of North Carolina apprenticeship certificate (Heating, Air Conditioning and Plumbing) is an alternative listed on Doc. 168.

What you'll do to get licensed in South Carolina

  1. 1Trade exam. Pass the destination's trade exam. South Carolina Plumbing (PB) technical examination through PSI, unless a listed waiver exam applies.
  2. 2Law / code exam. Pass a law, rules, or code exam. South Carolina Business Management & Law for Commercial Contractors examination (PSI), required of all applicants.
  3. 3Exam fee. Pay the exam fee. PSI examination fees paid directly to PSI at registration (amounts not published by LLR).
  4. 4License fee. Pay the license or certificate fee ($350). Mechanical Contractor licensure fee (license issued to the entity the qualifying party certifies).
  5. 5Other. Financial statement dated within 12 months showing working capital of $10,000 or net worth of $15,000 for Mechanical Group 2 (higher groups require more), or a surety bond in lieu.
  6. 6Surety bond. Post a surety bond ($15,000) (if applicable). Surety bond accepted in lieu of the financial statement for Mechanical Group 2 (larger bonds for higher groups).
  7. 7Other. Qualifying Party initial application (Doc. 168) with exam score sheets, Work Experience Affidavits, ID, Social Security card and notarized Verification of Lawful Presence.
  8. 8Other. SC Examination Waiver form completed by the origin board only if claiming a listed PB waiver exam; copies of licenses or exam results are not accepted.

Published fees on this path total $350, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Law / code exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $15,000 · if applicable

How South Carolina licenses master plumbers

South Carolina master plumber · “Mechanical Contractor, Plumbing (PB) classification - Qualifying Party certification

Statewide license

Verified September 16, 2026· 5 sources

Issued by South Carolina Contractor's Licensing Board (LLR); Residential Builders Commission for residential-only specialty work

South Carolina has no license titled 'master plumber'. The highest person-held plumbing credential is the Contractor's Licensing Board's Qualifying Party certification in the Plumbing (PB) classification of the Mechanical Contractor license. The individual passes the South Carolina plumbing technical exam through PSI (unless a listed waiver exam applies) and the South Carolina Business Management & Law for Commercial Contractors exam, documents two years of full-time experience within the past five years in the classification (or a PHCC Academy of North Carolina plumbing apprenticeship certificate), and is certified as the qualifying party for a licensed entity (which may be a sole proprietorship). The certification stays with the person; Doc. 168 states the certified qualifying party 'is not a licensed contractor' and the entity holds the license. The license fee is $350, with a financial statement or surety bond sized by mechanical group (Group 2, jobs to $100,000: working capital $10,000 or net worth $15,000, or a $15,000 bond). Work over $10,000 requires this license under § 40-11-30. Licensees from other states take the South Carolina plumbing technical exam and the Business Management & Law exam.

Moving to South CarolinaLeaving South Carolina

Why Wyoming has nothing to transfer

Wyoming master plumber

Licensed by cities and counties

Verified September 16, 2026· 13 sources

Wyoming issues no master plumber or plumbing contractor license; the State Fire Marshal's electrical program is the only statewide trade licensing and it has no plumbing component. The master credential exists only in city ordinances: Cheyenne's Master (8,000 apprentice hours plus 6,000 journeyman hours and an ICC/NICET/NASCLA exam), Casper's Master Plumber (apprenticeship or four years plus five years as a journeyman or master, ICC G27-N), Laramie's master plumbing certificate of qualification (three years beyond journeyman, city exam), Gillette's Master Plumber (five years plus the ICC exam), Sheridan's Master Plumber (2018 ICC G27 with Gas) and Jackson's Master Certificate of Qualification (ICC G-series National Standard exam plus time in service). In every one of these cities a plumbing contractor must be or employ a master of record, and the contractor license is a separate business license with fees from $150 to $300 plus insurance or bond. No city accepts an out-of-state master license: Casper, Gillette and Jackson reciprocate only with other Wyoming jurisdictions, Sheridan refuses all outside licenses, Cheyenne's Board has undefined discretion, and Laramie may waive its exam for an equivalent certificate from any governmental agency. Rock Springs registers contractors for $125 with proof of insurance and tests nobody.

How local licensing works in Wyoming

How local licensing works. There is no state plumbing board; each city's ordinance defines its own master-level license and the plumbing contractor license it qualifies. The reciprocity statute the cities cite reaches only other Wyoming jurisdictions, and no city publishes a route that honours another state's master plumber or plumbing contractor license.

Cheyenne. A Master level craft employee license (12.1.8) requires 4 years/8,000 hours documented as an apprentice (or certified equivalent training) plus 3 years/6,000 hours documented as a journeyman and passing results on a current ICC, NICET or NASCLA exam from the Board's list. Fees are $50 application plus $50 initial and $25 renewal. A Plumbing (C1) contractor - covering plumbing and pipe-fitting systems other than fire sprinklers - may be licensed only if it always employs a full-time master or qualified supervisor of that class, who may represent only one contractor (13.0); the C1 tested contractor license costs $50 application plus $200 initial and $75 renewal. Reciprocity is at the Board's discretion (3.3.2/3.5.1) with no published partner list and a statute limiting it to Wyoming jurisdictions.

Casper. Master Plumber ($75 new, $37.50 renewal) requires a federally recognized plumbing apprenticeship or four years in a Casper-licensed plumbing shop plus five years as a journeyman or master plumber in a Casper-licensed shop, and proof of passing ICC G27-N or equivalent. A Plumbing Contractor license ($300/$150) covers any plumbing work including steam and water boilers, must be backed by a full-time licensed master plumber, and requires $250,000/$500,000/$250,000 liability insurance. Reciprocal Master/Journeyman licenses ($50/$25) are limited to holders of a current license from another Wyoming jurisdiction with comparable testing.

Laramie. A master plumbing certificate of qualification requires three years as a journeyman (Table 15.24.020-1) and the building official's examination ($5 per attempt), or is issued without exam on presentation of a certificate from another governmental agency whose exam the board of examiners finds at least equal. All plumbing contractor work must be performed by or under the supervision of a master plumbing certificate holder, who must be available to the building official within 24 hours. The Plumbing Contractor license costs $300 new and $35 renewal and requires a business location and telephone, a $500,000 combined single limit insurance certificate naming the City and a Wyoming Workers' Compensation certificate of good standing; licenses and certificates run January 1 - December 31.

Gillette. Master Plumber ($50 new, $50 renewal) requires five years of approved experience and passing ICC examination results. A Class D Plumbing Contractor ($150/$50) works under the 2024 IPC, may not do gas pipefitting on its plumbing license, and must designate a Master of Record - a full-time employee or owner licensed as a Master Plumber, able to reach any job site within 48 hours and replaced within 60 days if they leave. Reciprocity (5-III-1(d)) is limited to active, good-standing licenses from other Wyoming local governments, with testing waived on proof of the ICC plumbing or contractor exam and no fee charged.

Sheridan. Master Plumber ($50 new, $50 annual) acts as Master of Record for a plumbing company, must show they meet the Plumbing Contractor requirements (2018 ICC G27 exam, four-year journeyman plumber verification on Form JP, two-year project verification on Form A) and pass the 2018 ICC G27 Master Plumber with Gas exam. The Plumbing Contractor license ($200 new, $200 annual) also needs a $1,000,000 liability insurance certificate and a $10,000 license and permit bond, and every plumbing business must hold both a contractor license and a Master of Record. The City does not accept licenses from other cities, towns, counties or states.

Jackson. The Master Certificate of Qualification card is the prerequisite for a Plumbing Contractor license and is the only individual card the Town still issues. It is obtained by passing the ICC National Standard trades exam through Pearson VUE (only G-series tests based on the 2018 I-Codes are accepted) and meeting the time-in-service requirement in JMC 15.36.050, or by reciprocity for someone 'currently licensed and in good standing in a Wyoming jurisdiction that meets our licensing requirements'. Applications go through the SmartGov portal with a 30-day processing window; the contractor license then requires the bond and insurance in JMC 15.36.035 and renews every December 31, while the Master COQ card renews triennially with six hours of ICC-accredited continuing education. Licensing covers only work inside Town limits.

Rock Springs. Contractors register with the Building Inspection Office ($125 fee and a certificate of insurance naming the City) before working; no master license or exam exists.

Moving to WyomingLeaving Wyoming

Common questions

Do I have to take the South Carolina master plumber exam if I'm licensed in Wyoming?
Yes. South Carolina requires the trade exam on this path, plus a law or code exam.
What does it cost to get a South Carolina master plumber license from Wyoming?
Published fees on this path total $350, not counting exam vendor fees or bonds.
Do my Wyoming work hours count in South Carolina?
Yes. Documented out-of-state experience counts toward South Carolina's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 90 days.
Does it work the other way, from South Carolina to Wyoming?
Not necessarily. Reciprocity is directed. Going from South Carolina to Wyoming, the mechanism is not applicable.

Sources

  1. S.C. Code of Laws Title 40, Chapter 11 - Contractors · S.C. Code Ann. §§ 40-11-30, 40-11-290, 40-11-410 · South Carolina Legislature · Statute · verified September 16, 2026
  2. General and Mechanical Contractors - Primary Qualifying Party (PQP) and Qualifying Party (QP) Initial Application, Doc. 168 (12/31/2025 v2.3) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 16, 2026
  3. SC Contractor's Licensing Board - Licensure (classifications, exams, waiver/reciprocity, fees) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 16, 2026
  4. SC Contractor's Licensing Board - Reciprocity/Waiver Agreements (Rev. 02/2019) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agreement Document · verified September 16, 2026
  5. South Carolina Residential Builders Commission - home page · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 16, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related