Colorado to Alabama: general contractor license reciprocity
Colorado does not issue a statewide general contractor license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Prime contractor license, including the NASCLA Accredited Examination route (states without a reciprocity agreement)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Alabama uses the NASCLA Accredited Examination for Commercial General Building Contractors as its own trade examination for the Building Construction (Commercial) classification: the Board's official PSI candidate bulletin states that for that examination PSI administers the NASCLA Accredited Examination, and prints the NASCLA content outline (115 questions, 330 minutes, 81 to pass, open book) as the Alabama commercial building trade exam. A contractor who already holds the NASCLA credential can release the transcript from NASCLA's National Examination Database instead of sitting the trade exam again; a contractor without it sits it through PSI like anyone else, and other classifications each have their own Alabama PSI trade exam. Nothing else is waived. Every applicant must pass the Alabama Business and Law examination, file the $300 prime application with a Qualifying Party Form, show a minimum net worth and working capital of $10,000 in an accountant-prepared financial statement, file proof of general liability insurance, register the entity with the Alabama Secretary of State, supply three commercial or industrial work references for each classification requested plus an organizational chart, and prove citizenship or lawful presence. The application must be complete and on file 30 days before one of the Board's quarterly meetings, and no one may book an examination until it is.
The trade examination is shown as waivable because Alabama's own commercial building trade exam is the NASCLA Accredited Examination; an applicant who has not passed it, or who wants a classification other than Building Construction (Commercial), still sits the relevant PSI trade examination, which is why it stays on the requirements list. Out-of-state experience is not converted into hours or years, because the Board sets no hour requirement; it counts through the work-experience section and the three reference forms, which the Board reviews to decide which classifications to grant. The Board does not publish a processing time or a bid-limit dollar table; ask the Board at (334) 272-5030. Licenses renew annually in a month set by the first letter of the company name, at $200 for a prime license and $100 for a subcontractor license, and a license left unrenewed for a year past its expiration date means a new application and retaking both the trade and business and law examinations. Amending a license to add a classification also requires that classification's trade examination.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in Colorado that the destination considers comparable.The NASCLA Accredited Examination for Commercial General Building Contractors is the examination Alabama itself uses for the Building Construction (Commercial) classification: the Board's PSI candidate bulletin says that for the Building Construction Examination (Commercial), PSI administers the NASCLA Accredited Examination, and prints its content outline as the Alabama exam. Candidates who have already passed it can send their transcript from NASCLA's National Examination Database at https://ned.nascla.org rather than repeating the exam. It is an examination credential and not a license: it waives no fee, no financial statement, no insurance, no reference and never the Alabama Business and Law examination. Because the Board does not publish a NASCLA policy statement of its own, confirm with the Board at (334) 272-5030 that a transcript will be accepted for the classification you want before relying on it.
- Documented commercial or industrial work experience in each classification requested, evidenced by three completed projects and three reference forms. The Board sets no minimum number of years or hours.
What you'll do to get licensed in Alabama
- 1Law / code exam. Pass a law, rules, or code exam. Alabama Business and Law examination (formerly the General Contractor examination) through PSI: 50 questions, 120 minutes, 70% to pass, open book against the NASCLA Contractors Guide to Business Law and Project Management, Alabama General edition. It is required of all general contractors and the Board says it is never waived, including on reciprocity..
- 2Trade exam. Pass the destination's trade exam. One PSI trade examination for each classification requested. For Building Construction (Commercial), PSI administers the NASCLA Accredited Examination for Commercial General Building Contractors as the Alabama trade exam: 115 questions, 330 minutes, 81 to pass, open book. An applicant who has already passed the NASCLA Accredited Examination elsewhere can release the transcript from NASCLA's National Examination Database rather than sitting it again. Other classifications have their own Alabama PSI trade examinations, and a complete application must be on file before anyone may register to test..
- 3Exam fee. Pay the exam fee ($96). $96 for each PSI examination, rising to $106 for AL Building Construction (Commercial), AL Highways and Streets Contractor, AL Municipal and Utility Contractor and AL Heavy Railroad Construction. Paid to PSI when the examination is booked, after the Board determines eligibility..
- 4Application fee. Pay the application fee ($300). Prime contractor application fee of $300, paid by cashier's check or money order only; personal and company checks are returned and Alabama law does not allow refunds. A subcontractor application is $150. The fee gives the applicant one year from the date the Board receives it to complete the requirements..
- 5Financial responsibility. Show financial responsibility of at least $10,000. Minimum net worth and working capital of $10,000, shown in an audited, reviewed or compiled financial statement prepared under generally accepted accounting principles by a CPA or a licensed public accountant approved by the Board, dated no more than one year before submission. The Alabama Department of Transportation booklet is also accepted. Cash-basis and tax-basis statements are not accepted and deficits are not accepted. The figures submitted set the license's bid limit; a bank line of credit can raise working capital to the level of net worth, and a personal or parent-company statement plus the Board's Guaranty Agreement can raise the bid limit one step. The Board does not publish the dollar table that converts financial figures into bid limits..
- 6Insurance. Carry the required insurance. Proof of current general liability insurance filed with the application, in the exact name of the applicant, showing the Alabama Licensing Board for General Contractors at 445 Dexter Ave, Suite 3060, Montgomery, AL 36104 as certificate holder..
- 7Business license. Obtain a business license. The license is issued to a legal entity, so every entity, Alabama or out-of-state, must be registered with the Alabama Secretary of State before the license issues, and a dated print screen of the Entity Details record goes in the application. Individuals and general partnerships are exempt from this step. The state and county privilege license is a separate obligation from the Board's license..
- 8Other. Qualifying Party Form for each named qualifier, three work or job reference forms from three separate licensed general contractors, registered architects, registered professional engineers or Board-qualified persons covering commercial or industrial projects in each classification requested, a Principal Individual Questionnaire for anyone whose experience is being counted, an organizational chart for the applicant entity, a notarized affidavit, and proof of United States citizenship or lawful presence..
Published fees on this path total $396, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam
- Exam fee · $96
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Alabama licenses general contractors
Alabama general contractor · “General Contractor (Prime) license, by major classification such as Building Construction (BC)”
Statewide license
Issued by Alabama Licensing Board for General Contractors
Alabama licenses commercial and public general contracting statewide through the Alabama Licensing Board for General Contractors in Montgomery; residential homebuilding is licensed separately by the Home Builders Licensure Board. A license is required for any undertaking, including labor and materials, costing $100,000 or more, and for swimming pool construction of $5,000 or more; subcontractors working under a licensed prime at or above those figures must also be licensed, and an awarding authority must confirm licensure before accepting a bid. The license belongs to the business rather than the person: it is issued to an individual, partnership, corporation, LLC or LLP and is qualified by a named qualifying party on the Board's Qualifying Party Form, so an inbound contractor applies as or for the entity that will sign contracts. Licenses are granted by classification, with major classifications including Building Construction, Building Construction Under Four Stories, Highways and Streets, Municipal and Utility, Heavy and Railroad, Mechanical and Electrical, each with named subclassifications, and at least three completed projects must be documented for every classification requested. Every license also carries a bid limit set by the financial statement the applicant files rather than by skill. The Board names five states whose licensees may have the trade examination waived; the business law examination is never waived.
Why Colorado has nothing to transfer
Colorado general contractor · “General / Building contractor license (Class A or B in most jurisdictions)”
Licensed by cities and counties
Colorado has no statewide general or commercial building contractor license. DORA licenses electricians and plumbers through its Division of Professions and Occupations but states on its own consumer page that general contractors are not licensed at the state level and that you should check with the city; the Pikes Peak Regional Building Department says the same thing in its exam notice. Unlimited and commercial building work is therefore licensed by each city, county or regional building department, typically as a Class A (unlimited) and Class B (limited commercial or under a height or storey cap) pair: Denver issues General Contractor Class A and Building Contractor Class B, Colorado Springs issues Building Contractor A-1, A-2, B-1 and B-2, Fort Collins issues Classes A, B, C1 and C2, and Aurora issues a single Commercial Building Contractor license. The license is held by the business and qualified by an individual who holds the supervisor certificate and has passed the relevant exam, so the person moving states applies for the certificate and the company applies for the license. The common thread is the ICC National Standard General Building Contractor (A) and Building Contractor (B) examinations, which nearly every Colorado jurisdiction requires, and a license must be obtained separately in each jurisdiction where the contractor will pull permits.
How local licensing works in Colorado
How local licensing works. Each Colorado jurisdiction licenses building contractors under its own ordinance and building code, and there is no state board above them. Class letters and size thresholds differ from place to place, so a Class B in Fort Collins is not a Class B in Colorado Springs. What is consistent is the exam: most jurisdictions require an ICC National Standard contractor examination, open book and multiple choice through Pearson VUE, and the Pikes Peak notice explains why that matters - "with successful passage of an ICC contractor exam, contractors can be secure in the knowledge that their results may be honored by many jurisdictions in Colorado and throughout the United States. However, each jurisdiction has the right to determine if this exam is acceptable." The same exam appears as W11, F11 or G11 for the unlimited (A) tier and W12, F12 or G12 for the limited (B) tier, depending on which code edition the jurisdiction has adopted, and departments generally require results from the current or a recent code year. The notice also warns that "passing an ICC contractor exam is NOT a license to practice and does not guarantee licensing in any jurisdiction."
Denver. The individual first earns a supervisor certificate. Class A covers "to erect, add to, alter, demolish, or repair any building or structure" and needs seven years of notarized commercial experience including ground-up high-rise work over 75 feet plus ICC exam #F11. Class B covers any building classified as less than a high rise and needs four years of notarized commercial experience on ground-up builds of 55 to 75 feet plus ICC exam #F12; Class B-2 caps the highest floor level or occupiable roof at 30 feet, with four years of experience including ground-up projects up to 40 feet, also on ICC #F12. Certificates cost $60 and renew every three years. The company then buys the General Contractor Class A or Building Contractor Class B license at $250 for three years. Denver states it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."
Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). Building Contractor A-1 covers "the construction, alteration and repair of any type or size of structure permitted by the Regional Building Code"; A-2 is the same except Group A, E and I occupancies over 30,000 square feet and any building requiring Type I construction; B-1 covers all occupancies except Groups A, E, I and H and Type I construction; B-2 covers nonstructural remodeling plus Group B, F, M or S buildings up to one storey and 7,500 square feet and Group R buildings up to 16 units and two storeys. License fees are $200 for A-1 and A-2, $175 for B-1 and B-2, on top of a $50 non-refundable application fee, and each of these classes requires an exam. Applicants supply three reference forms documenting experience, copies of all licenses held inside or outside Colorado, liability insurance naming PPRBD, workers' compensation, a Colorado certificate of good standing and a name-based judicial record check. Files close three weeks before the monthly Licensing Committee meeting, the Board of Review approves the following week, and the license must be claimed within 60 days. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."
Aurora. A single Commercial Building Contractor license "Requires ICC General Building Contractor 'A' OR 'B' Certification"; the supervisor license fee is $131 and the license fee is $392, plus registration and three job references. Limited Building Commercial and Demolition contractors register with three years of documented experience instead.
Fort Collins. Class A and A(DR) cover any building or structure; Class B and B(DR) cover new builds up to and including five storeys; Class C1 and C2 cover new builds up to three storeys and multi-family housing projects; E(C) covers nonstructural commercial alterations. Classes A and B require ICC exam G11 over the 2018 IBC plus the concrete manual, and Classes C1, C2 and E(C) require ICC exam G12, with G11 also accepted in place of G12. Every general contractor class also needs three project verifications with permits and final inspection records signed by someone unconnected to the applicant, and general liability of $1,000,000 per person with $2,000,000 per accident, property damage and aggregate. A new license with supervisor certificate is $300 for a two-year term including a $75 non-refundable application fee; renewals are $225. The city adopted the 2024 ICC codes with amendments in December 2025 and requires exam results from a current code year.
Boulder. Class A covers "the construction, alteration, wrecking, or repair of any type or size of building or structure permitted in the City of Boulder" and requires the ICC A Contractors certificate; Class B covers commercial and residential buildings of construction types V, IV, III-B and II-B and requires the ICC B certificate. New Class A and Class B applicants must also document education, training or years of experience in non-residential construction. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only.
Jefferson County. Class A (labeled 2018 G11) covers "the construction, alteration, tenant finish or repair of any type of structure permitted by the Building Code" and Class B (2018 G12) covers commercial buildings and single- or multi-dwelling buildings up to three storeys. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and licenses renew annually.
Arapahoe County. Building Contractor Class A (commercial) and Class B (commercial/residential) each cost $360 and require the matching ICC certification "or equivalent" certification by a recognized state or national certification entity; Class D specialty is $84. Insurance must carry a $2,000,000 general aggregate and $1,000,000 each occurrence, with the county as an additional holder.
Lakewood. Class A-1 Unlimited Commercial is "only issued to contractors with experience in building high-rise construction"; A-2 Limited Commercial is limited to two-storey commercial or four-storey R occupancies; A-4 covers commercial and residential remodeling not exceeding 30 percent of the original structure. A-1 and A-2 applicants attach any ICC certifications they or their employees hold. Fees are $150 for the first probationary year and $400 for each subsequent three-year renewal.
Douglas County. Unincorporated Douglas County registers general contractors rather than licensing them and states that it "has no testing requirements." Registration needs the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; fees are currently waived.
Out-of-state holders. None of the jurisdictions reviewed will convert another state's general contractor license into a Colorado one. Denver and Boulder rule it out in writing, and PPRBD will not accept exam results earned out of state. What does carry across is the ICC National Standard contractor certification: pass the (A) or (B) exam on a code edition the jurisdiction currently accepts and it will usually satisfy the testing requirement in Denver, Colorado Springs, Aurora, Fort Collins, Boulder, Jefferson County and Arapahoe County, though each department still verifies experience, references or project history separately and charges its own fee. Jefferson County goes further and accepts a current license from another ICC participating jurisdiction in place of the exam. Check the required class, exam code year and fee with each building department before applying, and expect to hold a license in every jurisdiction where you pull permits.
- Denver (Community Planning and Development)
- Colorado Springs / El Paso County (Pikes Peak Regional Building Department)
- Aurora (Building Division)
- Fort Collins (Planning and Development Services)
- Lakewood (Public Works)
- Boulder
- Jefferson County (Division of Building Safety)
- Arapahoe County (Building Division)
- Douglas County (Building Division)
Common questions
- Do I have to take the Alabama general contractor exam if I'm licensed in Colorado?
- The trade exam is waived, but Alabama requires a law or code exam.
- What does it cost to get a Alabama general contractor license from Colorado?
- Published fees on this path total $396, not counting exam vendor fees or bonds.
- Do my Colorado work hours count in Alabama?
- Yes. Documented out-of-state experience counts toward Alabama's eligibility requirements.
- Does it work the other way, from Alabama to Colorado?
- Not necessarily. Reciprocity is directed. Going from Alabama to Colorado, the mechanism is not applicable.
Sources
- Alabama Licensing Board for General Contractors - How to Apply for a License (fees, reciprocity, references) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Alabama Licensing Board for General Contractors - Contractor Licensing Law (definition and thresholds) · Ala. Code §§ 34-8-1, 34-8-2, 34-8-7, 34-8-8, 34-8-9 · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Prime Contractor Application and Instructions - Alabama Licensing Board for General Contractors (rev. 02/2022) · Ala. Admin. Code r. 230-X-1-.33; Ala. Code § 34-8-2(b) · Alabama Licensing Board for General Contractors · Form · verified September 17, 2026
- State of Alabama General Contractors - Candidate Information Bulletin (PSI, updated 1/23/26) · PSI Services LLC for the Alabama Licensing Board for General Contractors · Other · verified September 17, 2026
- Alabama Licensing Board for General Contractors - Reciprocity (reciprocal states and exam waiver) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Alabama Licensing Board for General Contractors - Renewal Information (staggered renewal months and fees) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Alabama Licensing Board for General Contractors - Testing (PSI bulletin and trade exam requirement) · Ala. Admin. Code r. 230-X-1-.27, 230-X-1-.34 · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.