Colorado to Alabama: residential contractor license reciprocity
Colorado does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Unlimited Home Builders License by examination (states with no exemption on the Board's list)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A residential builder arriving from a state that is not on the Board's short exemption list gets no credit for the license held elsewhere. The applicant entity files the notarized application, names its designated qualifying representative, pays the $100 processing fee and the $250 annual license and Recovery Fund fees in one $350 payment, orders a business-related credit report sent straight to the Board by the credit agency, files the entity certificates and proves citizenship or lawful presence. The qualifying representative then takes both Alabama Home Builders exams through Prov: the Skill exam (80 questions, four hours, 66% to pass, based on the 2015 International Residential Code) and the Business and Law exam (40 questions, two hours, 70% to pass). No Board authorization is needed to book the exams and a passing score stays good for three years. Alabama sets no minimum years of building experience, so documented out-of-state work neither shortens nor replaces any step. The Board says a complete file takes roughly three to four weeks and must be complete seven days before the Board meeting that reviews it.
Both Prov examinations are required on this path, and the Business and Law exam is never waived at any level. A license with limitation or limited to roofing skips the examination entirely, but its experience test is a business or occupational license as a contractor issued by an Alabama municipality, township or county, currently held or held within the year before the application, so an out-of-state local license does not open that route; the alternatives are a written recommendation from the holder of an unlimited home builders license in Alabama or any other state, or from a building official in Alabama or any other state. Licenses run for the calendar year and renew by November 30 for the following year, with six hours of continuing education. A general contractor license issued by the other Alabama board does not cover residential construction unless its number is below 18908, which means issued before the Home Builders Licensure Board was created in 1992.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Do not count
- Typical processing
- About 28 days
What you must already have
- The Board must be satisfied that the applicant has the experience, ability, good character and willingness to serve the public required by Ala. Code § 34-14A-5. There is no published minimum number of years or hours of residential building experience for an unlimited license.
What you'll do to get licensed in Alabama
- 1Trade exam. Pass the destination's trade exam. Alabama HBLB Skill Exam through Prov: 80 questions, 4 hours, 66% to pass, open book against the 2015 International Residential Code and the Residential Home Builder Study Guide, covering plan reading, sitework and foundations, concrete, masonry, carpentry, roofing, interior and exterior finish, associated trades and OSHA. No Board authorization is needed before booking, and a passing score stays valid for three years..
- 2Law / code exam. Pass a law, rules, or code exam. Alabama HBLB Business and Law exam through Prov: 40 questions, 2 hours, 70% to pass, open book against the NASCLA Contractors Guide to Business, Law and Project Management, Alabama Residential Construction edition. This exam is never waived..
- 3Exam fee. Pay the exam fee ($130). $130 if the Skill and Business and Law exams are taken on the same day, or $80 for each exam taken on separate days. Testing fees are paid directly to Prov, not to the Board..
- 4Application fee. Pay the application fee ($100). Non-refundable new license application processing fee (Ala. Admin. Code r. 465-X-4-.04(3)). It is paid together with the annual license fee in a single payment and is not returned if the application is withdrawn or denied..
- 5License fee. Pay the license or certificate fee ($250). Annual license fee of $235 plus the $15 annual Homeowners' Recovery Fund fee, sent with the application as one $350 payment together with the $100 processing fee. The license fee is refunded on written request if the application is rejected or denied. A license limited to residential roofing costs $150 a year and pays no Recovery Fund fee. Cheque or money order only; the Board does not take cash or credit cards..
- 6Financial responsibility. Show financial responsibility. Business-related credit report including a public records search, ordered by the applicant at a fee of $35 and sent to the Board directly by the credit reporting agency. There is no net worth or working capital minimum, but outstanding business-related collection or foreclosure accounts must not exceed $500 in total, and outstanding judgments, judgment liens or perfected liens must not exceed $500 in total ($1,000 where the matter is under dispute or on appeal), unless the applicant documents payment, a payment plan or the circumstances to the Board's satisfaction. An application pending more than 90 days may need an updated report..
- 7Business license. Obtain a business license. The license is issued to the legal entity that will contract. A corporation, limited liability company or limited partnership files a Certificate of Compliance from the Alabama Department of Revenue, and an entity organized outside Alabama also files a Certificate of Existence from the Alabama Secretary of State. Conducting residential homebuilding through an entity that does not itself hold an Alabama Home Builders license is a violation of the Act..
- 8Surety bond. Post a surety bond ($10,000) (if applicable). Required only for a license limited to residential roofing: a surety bond of not less than $10,000 naming the Home Builders Licensure Board as obligee, valid through December 31 of the licensure year and submitted to the Board directly by the surety (Ala. Admin. Code r. 465-X-3-.04(5)). Roofers file this instead of a credit report. Unlimited and limited licenses require no bond..
- 9Insurance. Carry the required insurance (if applicable). The Board states that the law regulating residential home builders does not address insurance, so no policy is required for licensure. Other Alabama laws, and most lenders and homeowners, still expect general liability and workers compensation coverage; the Alabama Department of Labor answers questions about workers compensation..
- 10Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: six credit hours of Board-approved continuing education each year, two of them in Alabama-specific subjects, taken by the designated qualifying representative where the license is held by an entity. Licenses run for the calendar year and renewal applications are due by November 30 of the preceding year (Ala. Admin. Code r. 465-X-3-.06)..
- 11Other. Notarised application on the Board's form (no photocopies), notarized corporate minutes or equivalent naming the designated qualifying representative as an officer, general partner, member or manager, and proof of United States citizenship or lawful presence for every applicant..
Published fees on this path total $480, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Law / code exam
- Exam fee · $130
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $10,000 · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Alabama licenses residential contractors
Alabama residential contractor · “Residential Home Builders License (without limitation, with limitation, or limited to residential roofing)”
Statewide license
Issued by Alabama Home Builders Licensure Board
Alabama licenses residential builders statewide through the Home Builders Licensure Board in Montgomery, which is a different agency from the Alabama Licensing Board for General Contractors that handles commercial work. A license is required to construct, remodel, repair or improve a residential structure where the cost of the undertaking including labor and materials exceeds $10,000. There are three tiers: a license without limitation (unlimited), which covers whole houses, work involving more than one trade and residential roofing; a license with limitation (limited), for single-trade work that is not a whole residence; and a license limited to residential roofing. The license is held by the business, not the person: an individual may be licensed personally, but a partnership, corporation, LLC or non-profit must name a designated qualifying representative who is a general partner, officer, member or manager and who personally meets the experience and examination requirements, so an inbound builder applies as or for the entity that will sign contracts. An unlimited license is earned by passing the Alabama Home Builders Skill exam and the Business and Law exam through Prov and by showing business-related financial responsibility through a credit report; Alabama sets no minimum years of experience. The Board publishes one reciprocity rule, naming five states whose residential licensees may skip the Skill exam.
Why Colorado has nothing to transfer
Colorado residential contractor · “Residential / Home Builder contractor license (Class C in most jurisdictions)”
Licensed by cities and counties
Colorado issues no statewide residential or home builder contractor license. DORA's consumer page says plainly that general contractors are not licensed at the state level and tells consumers to check with their city, and the Pikes Peak Regional Building Department's exam notice states that "Colorado does NOT have a state license for the building or mechanical trades." Homebuilding is licensed instead by each city, county or regional building department, most of which use a Class C tier for one- and two-family dwellings; Denver calls it Residential Contractor Class C, Colorado Springs calls it Building Contractor C (Home Builder), Fort Collins splits it into Classes D1 and D2, and Aurora calls it Residential Building Contractor. The license is normally issued to the contracting business and is qualified by a named individual who holds the supervisor certificate, so an arriving builder usually applies for the personal certificate first and the company license second. Almost every licensing jurisdiction accepts the same underlying credential - the ICC National Standard Residential Building Contractor (C) examination - which makes the exam, rather than an out-of-state license, the thing that actually travels. A license must be obtained in each jurisdiction where the builder will pull permits, and a few places, such as unincorporated Douglas County, require only registration and no exam at all.
How local licensing works in Colorado
How local licensing works. There is no state contractor board, so each city, county or regional building department writes its own contractor ordinance under its building code. Class letters mean different things in different places, and holding a license in one Colorado jurisdiction does not let you pull permits in the next one. Most jurisdictions build the residential tier around the ICC National Standard Residential Building Contractor (C) examination, which is open book, multiple choice and delivered by Pearson VUE; the same exam appears under different ICC exam IDs (W13, F13, G13) because each jurisdiction adopts a different edition of the building code and requires a current one. Passing an ICC exam is not itself a license - it is a credential you then present to each building department, which also verifies your experience.
Denver. Licensing is two steps. The individual first earns a Residential Contractor Class C supervisor certificate, which covers erecting, adding to, altering or repairing one- and two-family dwellings, U occupancy buildings and attached single-unit dwellings (IRC townhouses). It requires two years of field work as a journeyman carpenter or construction foreman with foundation, framing and roofing experience, documented with notarized letters, plus ICC exam #F13 National Standard Residential Building Contractor C. The certificate costs $60 and renews every three years. The business then applies for the Residential Contractor Class C license, $250 for three years. Denver states that it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."
Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). PPRBD licenses for unincorporated El Paso County, Colorado Springs, Fountain, Manitou Springs, Green Mountain Falls, Monument, Palmer Lake, Calhan and Woodland Park. Building Contractor C (Home Builder) covers one- and two-family dwellings up to three stories plus accessory structures, and R-2 buildings of up to eight units and two stories; the license fee is $150 with a $50 non-refundable application fee. Building Contractor E covers residential accessory structures and interior nonstructural remodeling, $75. Applicants file three reference forms documenting experience, a liability insurance certificate naming PPRBD, a workers' compensation certificate or rejection of coverage, a Colorado certificate of good standing and a name-based judicial record check; the Licensing Committee and Board of Review act on each file. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."
Aurora. Residential Building Contractor "Requires ICC Residential Building Contractor 'C' Certification"; the supervisor license fee is $131 and the license fee is $235, and registration plus three job references are also required. Remodeling contractors register with three years of documented experience instead of taking an exam.
Fort Collins. The residential-only classes are D1 (single-family attached and detached, no more than two dwelling units, townhouses), D2 (detached garages and Group U Division 1 occupancies up to 1,000 sq ft), E(R) nonstructural residential alterations and MM. All of them require ICC exam G13, plus three project verifications, each with the permit and the final inspection or certificate of occupancy, signed by someone unconnected to the applicant's company. General liability of $1,000,000 per person and $2,000,000 per accident and aggregate is required. A new license with supervisor certificate is $300 for two years, including a $75 non-refundable application fee.
Boulder. Class C covers construction, alteration, wrecking or repair of any detached one- and two-family dwelling or townhome and requires the ICC C Contractors certificate. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only. Fee amounts are published in Boulder's contractor license application and schedule of fees.
Jefferson County. For unincorporated Jefferson County, a Class C license (labeled 2018 G13) covers one- and two-family dwellings and accessory buildings. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and the license renews annually.
Arapahoe County. Building Contractor Class C (residential) costs $180 and requires an ICC Class "C" certification or an equivalent certification from a recognized state or national certification entity. General liability of $1,000,000 per occurrence and $2,000,000 aggregate must name the county.
Lakewood. Contractors register with Public Works; class A-3 Residential covers new construction and remodeling. The registration page does not impose an exam on general contractors but asks A-1 and A-2 applicants to attach any ICC certifications held. The fee is $150 for the first probationary year and $400 for each subsequent three-year renewal.
Douglas County. Unincorporated Douglas County requires registration rather than a license and states that it "has no testing requirements." Registrants file the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; registration fees are currently waived and applications are processed in about two business days.
Out-of-state holders. No Colorado jurisdiction reviewed grants a residential contractor license on the strength of another state's license. Denver and Boulder say so expressly, and PPRBD will not accept out-of-state exam results. The practical route is to pass the ICC National Standard Residential Building Contractor (C) exam on a code edition the jurisdiction currently accepts, gather documented project experience and references, and then apply separately in each city or county where you intend to build. Jefferson County is the clearest exception: it will take a current license from another ICC participating jurisdiction in place of the exam. Confirm the class, exam code year and fee with the building department before applying, because these change independently in every jurisdiction.
- Denver (Community Planning and Development)
- Colorado Springs / El Paso County (Pikes Peak Regional Building Department)
- Aurora (Building Division)
- Fort Collins (Planning and Development Services)
- Lakewood (Public Works)
- Boulder
- Jefferson County (Division of Building Safety)
- Arapahoe County (Building Division)
- Douglas County (Building Division)
Common questions
- Do I have to take the Alabama residential contractor exam if I'm licensed in Colorado?
- Yes. Alabama requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Alabama residential contractor license from Colorado?
- Published fees on this path total $480, not counting exam vendor fees or bonds.
- Do my Colorado work hours count in Alabama?
- No. Alabama does not credit out-of-state hours on this path.
- How long does the application take?
- The board's published or typical processing time is about 28 days.
- Does it work the other way, from Alabama to Colorado?
- Not necessarily. Reciprocity is directed. Going from Alabama to Colorado, the mechanism is not applicable.
Sources
- Alabama Home Builders Licensure Board - Frequently Asked Questions, Applicants (reciprocity, thresholds, timelines) · Alabama Home Builders Licensure Board · Faq · verified September 17, 2026
- Alabama Home Builders Licensure Board - How to Get Licensed (license types, exams, credit report, bond) · Alabama Home Builders Licensure Board · Agency Page · verified September 17, 2026
- Home Builders Licensure Law and Administrative Rules and Regulations (law effective October 1, 2025; rules effective November 14, 2025) · Ala. Code § 34-14A-1 et seq.; Ala. Admin. Code r. 465-X-3-.04, 465-X-3-.06, 465-X-4-.04 · Alabama Home Builders Licensure Board · Admin Rule · verified September 17, 2026
- New Unlimited License Application Packet, Corporate - Alabama Home Builders Licensure Board (with Prov Candidate Information Bulletin) · Ala. Code §§ 34-14A-7, 34-14A-14 · Alabama Home Builders Licensure Board · Form · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.