Colorado to Tennessee: general contractor license reciprocity
Colorado does not issue a statewide general contractor license, so there is nothing to transfer. Here is Tennessee's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
BC-B or BC license, including the NASCLA Accredited Examination route
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Tennessee accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own commercial trade examination. The Board's exam information page names the NASCLA national commercial examination as accepted, and the Board's trade exam waiver document matches it to the BC-B Commercial classification, alongside the NASCLA electrical examination which matches to CE. A contractor who already holds the NASCLA credential therefore does not sit the Tennessee BC-B trade examination, but must still pass the Tennessee Business and Law examination and complete the whole application: Qualifying Agent, CPA-reviewed or CPA-audited financial statement, general liability and workers' compensation insurance, Letter of Reference, notarized Contractor's Affidavit and Secretary of State registration. An applicant with neither the NASCLA credential nor a license from a waiver state sits the Tennessee trade examination for the classification requested as well as Business and Law. Out-of-state experience counts either way, because the Board weighs documented experience on projects of the size requested when it sets the classification and the monetary limit.
The trade examination is waived only for an applicant holding the NASCLA Accredited Examination for Commercial General Building Contractors or a license from one of the waiver states listed separately on this page. Everyone else sits the Tennessee examination for the classification requested: BC-B Commercial, BC Building Construction for combined residential, commercial and industrial work, BC-b(sm) for small commercial up to $1,500,000, or BC-C Industrial. The Business and Law examination is never waived on this route. Applications are decided at Board meetings, held at least six times a year, and an interview may be required. The Board does not publish a processing time; the Board office is (615) 741-8307 or (800) 544-7693.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in Colorado that the destination considers comparable.The Board's exam information page states that Tennessee accepts NASCLA accredited examinations for Commercial General Building Contractors and for Electrical contractors, and the Board's trade exam waiver document lists a NASCLA row mapping the national commercial and electrical examinations to the Tennessee BC-B and CE classifications. The Board does not map the NASCLA examination to the residential BC-A classification. The NASCLA credential is origin-independent: it is an examination a candidate sits, not a license held in another state, and it does not waive the Tennessee Business and Law examination or any application, financial, insurance or registration requirement.
- Documented construction experience appropriate to the classification and monetary limit requested. Tennessee sets no fixed minimum number of years, but the Board states it prefers about three years and weighs experience, plant and equipment when it assigns a classification.Experience may be shown through previous employment, volunteer work, internships, education or training, evidenced by letters of recommendation, certificates, diplomas or employment verification, and may have been earned working for other contractors or in another state.
- The Qualifying Agent who holds the out-of-state credential is an owner, officer or full-time employee of the Tennessee applicant entity; a Qualifying Agent who is not an owner files a Power of Attorney with the application.
What you'll do to get licensed in Tennessee
- 1Law / code exam. Pass a law, rules, or code exam. Tennessee Business and Law examination, taken by the Qualifying Agent after the Board approves the application. It is open book, 50 questions, 140 minutes, 73% to pass, and is drawn from the Contractors' Guide to Business, Law and Project Management, Tennessee Edition. It is not waived by any trade exam waiver agreement or by the NASCLA examination; the only contractor license that does not require it is the restricted residential BC-A/r. Examination scores are typically treated by the Board as valid for two years..
- 2Trade exam. Pass the destination's trade exam (if applicable). Tennessee BC-B Commercial trade examination, administered after the Board approves the application. It is open book, 100 questions, 300 minutes, 73% to pass. It is required only of applicants who do not hold the NASCLA Accredited Examination for Commercial General Building Contractors and do not come in on a trade exam waiver. The equivalent examinations for the other general classifications are BC Building Construction (100 questions, 300 minutes), BC-b(sm) Small Commercial (70 questions, 200 minutes) and BC-C Industrial (72 questions, 210 minutes)..
- 3Application fee. Pay the application fee ($250). Non-refundable application and initial license fee of $250, paid with the Initial New Contractor Application at core.tn.gov (Tenn. Comp. R. & Regs. 0680-01-.20(1)). The license renews every two years at $200, with a $20 per month late penalty for up to twelve months..
- 4Exam fee. Pay the exam fee. Examination fee, paid to the testing company rather than to the Board. The Board's rule sets the fee as whatever the administering company charges subject to Board approval, so no amount is published by the Board; Prov began administering Tennessee contractor examinations on July 1, 2026 and publishes the current fee when an examination is booked. One fee is charged for each examination taken..
- 5Financial responsibility. Show financial responsibility. Financial statement prepared by a licensed public accountant or CPA on the accountant's letterhead, in the name of the applicant entity, conforming to GAAP and dated no more than twelve months before the application. There is no fixed minimum dollar figure: the monetary limit on the license is set at ten times the lesser of working capital and net worth, supported by experience, so a $150,000 limit needs $15,000 of each and an unlimited license needs $300,000 of each. A reviewed opinion is required for a limit of $3,000,000 or less and an audited opinion above that. A line of credit or a Board Guaranty Agreement may be used to supplement working capital or net worth..
- 6Surety bond. Post a surety bond (if applicable). Optional alternative to the CPA-reviewed or CPA-audited financial statement: from July 1, 2026 the Board accepts a Contractors' Surety Bond on the Board's own form in an amount of at least 50% of the monetary limit requested. A bond or Guaranty Agreement may also be required in addition to the financial statement where the statement is primarily cash without fixed assets or where a parent company guarantees the applicant..
- 7Insurance. Carry the required insurance ($100,000). Certificate of general liability insurance in the same name as the license, listing the Board as certificate holder. The Board's minimum coverage is set by the monetary limit requested: $100,000 of coverage for a limit up to $500,000, $500,000 of coverage for a limit of $501,001 to $1,500,000, and $1,000,000 of coverage above $1,500,001 to unlimited. Workers' compensation insurance is also required unless the business has no employees and qualifies for an exemption or registers as a Construction Services Provider. The amount shown is the lowest coverage tier..
- 8Business license. Obtain a business license. The license is issued to a legal entity in its exact name, so the corporation, LLC or limited partnership must be registered with the Tennessee Secretary of State before the license is issued; an entity formed in another state registers as a foreign entity and files its Certificate of Authority or Articles of Organization. A separate business tax license from the Tennessee Department of Revenue is needed for each city or county the contractor operates in..
- 9Other. Letter of Reference on the Board's form from a past client, employer or code official who can speak to construction experience; it may be from outside Tennessee but may not come from a relative, and only one is needed. Also required: a Contractor's Affidavit signed and notarized by the Qualifying Agent, owners, partners, members, main officers and major stockholders, a statement of experience and management information, and a list of equipment. An interview at a Board meeting may be required, for example where the Qualifying Agent is not a majority owner and has been employed less than six months, where the experience shown is thin for the limit requested, or where there is complaint, judgment, bankruptcy or felony history..
Published fees on this path total $250, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $100,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Tennessee licenses general contractors
Tennessee general contractor · “Contractor license, BC-B Commercial or BC Building Construction classification”
Statewide license
Issued by Tennessee Board for Licensing Contractors (Department of Commerce and Insurance)
Tennessee licenses contractors at state level, and the unlimited tier is the BC family of building classifications issued by the Board for Licensing Contractors under T.C.A. Title 62, Chapter 6. BC-B Commercial covers buildings for use and occupancy by the general public, including residential buildings of more than four units or more than three stories; BC Building Construction is the full classification covering residential, commercial and industrial work and all 34 building categories; BC-b(sm) is small commercial capped at $1,500,000 and BC-C is industrial. A license is required before bidding on, offering on or contracting for a project of $25,000 or more. The license is held by the business, issued in the entity's exact name and qualified by a named Qualifying Agent who is an owner, officer or full-time employee and who sits the examinations, so an inbound contractor applies as or for the entity that will sign contracts. Every license carries a monetary limit set at ten times the lesser of working capital and net worth on a CPA-reviewed or CPA-audited financial statement, plus documented experience on projects of that size; above $3,000,000 the statement must be audited, and unlimited means showing $300,000 in both working capital and net worth. Tennessee accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own commercial trade examination, and has trade exam waiver agreements with a short list of named states.
Why Colorado has nothing to transfer
Colorado general contractor · “General / Building contractor license (Class A or B in most jurisdictions)”
Licensed by cities and counties
Colorado has no statewide general or commercial building contractor license. DORA licenses electricians and plumbers through its Division of Professions and Occupations but states on its own consumer page that general contractors are not licensed at the state level and that you should check with the city; the Pikes Peak Regional Building Department says the same thing in its exam notice. Unlimited and commercial building work is therefore licensed by each city, county or regional building department, typically as a Class A (unlimited) and Class B (limited commercial or under a height or storey cap) pair: Denver issues General Contractor Class A and Building Contractor Class B, Colorado Springs issues Building Contractor A-1, A-2, B-1 and B-2, Fort Collins issues Classes A, B, C1 and C2, and Aurora issues a single Commercial Building Contractor license. The license is held by the business and qualified by an individual who holds the supervisor certificate and has passed the relevant exam, so the person moving states applies for the certificate and the company applies for the license. The common thread is the ICC National Standard General Building Contractor (A) and Building Contractor (B) examinations, which nearly every Colorado jurisdiction requires, and a license must be obtained separately in each jurisdiction where the contractor will pull permits.
How local licensing works in Colorado
How local licensing works. Each Colorado jurisdiction licenses building contractors under its own ordinance and building code, and there is no state board above them. Class letters and size thresholds differ from place to place, so a Class B in Fort Collins is not a Class B in Colorado Springs. What is consistent is the exam: most jurisdictions require an ICC National Standard contractor examination, open book and multiple choice through Pearson VUE, and the Pikes Peak notice explains why that matters - "with successful passage of an ICC contractor exam, contractors can be secure in the knowledge that their results may be honored by many jurisdictions in Colorado and throughout the United States. However, each jurisdiction has the right to determine if this exam is acceptable." The same exam appears as W11, F11 or G11 for the unlimited (A) tier and W12, F12 or G12 for the limited (B) tier, depending on which code edition the jurisdiction has adopted, and departments generally require results from the current or a recent code year. The notice also warns that "passing an ICC contractor exam is NOT a license to practice and does not guarantee licensing in any jurisdiction."
Denver. The individual first earns a supervisor certificate. Class A covers "to erect, add to, alter, demolish, or repair any building or structure" and needs seven years of notarized commercial experience including ground-up high-rise work over 75 feet plus ICC exam #F11. Class B covers any building classified as less than a high rise and needs four years of notarized commercial experience on ground-up builds of 55 to 75 feet plus ICC exam #F12; Class B-2 caps the highest floor level or occupiable roof at 30 feet, with four years of experience including ground-up projects up to 40 feet, also on ICC #F12. Certificates cost $60 and renew every three years. The company then buys the General Contractor Class A or Building Contractor Class B license at $250 for three years. Denver states it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."
Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). Building Contractor A-1 covers "the construction, alteration and repair of any type or size of structure permitted by the Regional Building Code"; A-2 is the same except Group A, E and I occupancies over 30,000 square feet and any building requiring Type I construction; B-1 covers all occupancies except Groups A, E, I and H and Type I construction; B-2 covers nonstructural remodeling plus Group B, F, M or S buildings up to one storey and 7,500 square feet and Group R buildings up to 16 units and two storeys. License fees are $200 for A-1 and A-2, $175 for B-1 and B-2, on top of a $50 non-refundable application fee, and each of these classes requires an exam. Applicants supply three reference forms documenting experience, copies of all licenses held inside or outside Colorado, liability insurance naming PPRBD, workers' compensation, a Colorado certificate of good standing and a name-based judicial record check. Files close three weeks before the monthly Licensing Committee meeting, the Board of Review approves the following week, and the license must be claimed within 60 days. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."
Aurora. A single Commercial Building Contractor license "Requires ICC General Building Contractor 'A' OR 'B' Certification"; the supervisor license fee is $131 and the license fee is $392, plus registration and three job references. Limited Building Commercial and Demolition contractors register with three years of documented experience instead.
Fort Collins. Class A and A(DR) cover any building or structure; Class B and B(DR) cover new builds up to and including five storeys; Class C1 and C2 cover new builds up to three storeys and multi-family housing projects; E(C) covers nonstructural commercial alterations. Classes A and B require ICC exam G11 over the 2018 IBC plus the concrete manual, and Classes C1, C2 and E(C) require ICC exam G12, with G11 also accepted in place of G12. Every general contractor class also needs three project verifications with permits and final inspection records signed by someone unconnected to the applicant, and general liability of $1,000,000 per person with $2,000,000 per accident, property damage and aggregate. A new license with supervisor certificate is $300 for a two-year term including a $75 non-refundable application fee; renewals are $225. The city adopted the 2024 ICC codes with amendments in December 2025 and requires exam results from a current code year.
Boulder. Class A covers "the construction, alteration, wrecking, or repair of any type or size of building or structure permitted in the City of Boulder" and requires the ICC A Contractors certificate; Class B covers commercial and residential buildings of construction types V, IV, III-B and II-B and requires the ICC B certificate. New Class A and Class B applicants must also document education, training or years of experience in non-residential construction. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only.
Jefferson County. Class A (labeled 2018 G11) covers "the construction, alteration, tenant finish or repair of any type of structure permitted by the Building Code" and Class B (2018 G12) covers commercial buildings and single- or multi-dwelling buildings up to three storeys. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and licenses renew annually.
Arapahoe County. Building Contractor Class A (commercial) and Class B (commercial/residential) each cost $360 and require the matching ICC certification "or equivalent" certification by a recognized state or national certification entity; Class D specialty is $84. Insurance must carry a $2,000,000 general aggregate and $1,000,000 each occurrence, with the county as an additional holder.
Lakewood. Class A-1 Unlimited Commercial is "only issued to contractors with experience in building high-rise construction"; A-2 Limited Commercial is limited to two-storey commercial or four-storey R occupancies; A-4 covers commercial and residential remodeling not exceeding 30 percent of the original structure. A-1 and A-2 applicants attach any ICC certifications they or their employees hold. Fees are $150 for the first probationary year and $400 for each subsequent three-year renewal.
Douglas County. Unincorporated Douglas County registers general contractors rather than licensing them and states that it "has no testing requirements." Registration needs the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; fees are currently waived.
Out-of-state holders. None of the jurisdictions reviewed will convert another state's general contractor license into a Colorado one. Denver and Boulder rule it out in writing, and PPRBD will not accept exam results earned out of state. What does carry across is the ICC National Standard contractor certification: pass the (A) or (B) exam on a code edition the jurisdiction currently accepts and it will usually satisfy the testing requirement in Denver, Colorado Springs, Aurora, Fort Collins, Boulder, Jefferson County and Arapahoe County, though each department still verifies experience, references or project history separately and charges its own fee. Jefferson County goes further and accepts a current license from another ICC participating jurisdiction in place of the exam. Check the required class, exam code year and fee with each building department before applying, and expect to hold a license in every jurisdiction where you pull permits.
- Denver (Community Planning and Development)
- Colorado Springs / El Paso County (Pikes Peak Regional Building Department)
- Aurora (Building Division)
- Fort Collins (Planning and Development Services)
- Lakewood (Public Works)
- Boulder
- Jefferson County (Division of Building Safety)
- Arapahoe County (Building Division)
- Douglas County (Building Division)
Common questions
- Do I have to take the Tennessee general contractor exam if I'm licensed in Colorado?
- The trade exam is waived, but Tennessee requires a law or code exam.
- What does it cost to get a Tennessee general contractor license from Colorado?
- Published fees on this path total $250, not counting exam vendor fees or bonds.
- Do my Colorado work hours count in Tennessee?
- Yes. Documented out-of-state experience counts toward Tennessee's eligibility requirements.
- Does it work the other way, from Tennessee to Colorado?
- Not necessarily. Reciprocity is directed. Going from Tennessee to Colorado, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Contractor License Application Package and Instructions · T.C.A. Sections 62-6-111, 62-6-120 · Tennessee Board for Licensing Contractors · Form · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Classification Outline · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Exam Information · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Fees · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Get a Contractor License · T.C.A. Title 62, Chapter 6 · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Trade Exam Waiver (Reciprocity) with Tennessee and Request for Contractor License Verification (Rev. 06/2026) · Tennessee Board for Licensing Contractors · Agreement Document · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Candidate Information Bulletin · PSI Services LLC for the Tennessee Board for Licensing Contractors · Other · verified September 17, 2026
- Rules of the Tennessee Board for Licensing Contractors, Chapter 0680-01 Licensing (November 2025 revision) · Tenn. Comp. R. & Regs. 0680-01-.02, -.12, -.13, -.16, -.20, -.29, -.30, -.32 · Tennessee Secretary of State, Division of Publications · Admin Rule · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.