LicensebyState

Colorado to Virginia: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 16 sources

Colorado does not issue a statewide general contractor license, so there is nothing to transfer. Here is Virginia's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

NASCLA Accredited Examination in place of the Virginia CBC trade exam

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Virginia accepts the NASCLA Accredited Examination for Commercial General Building Contractors as equivalent to its own Commercial Building (CBC) technical examination, so a qualified individual who already holds the NASCLA credential from any state does not sit the Virginia trade examination. The Board's own words on the license application are that the NASCLA examination is equivalent but the applicant must still provide compatible experience, which means the qualified individual still documents one year of commercial building experience for Class C, three years for Class B or five years for Class A on the Experience Verification Form. Nothing else is waived: the designated employee of a Class A or Class B firm still passes the Advanced, General and Virginia portions of the PSI business examination, the firm still meets the net worth or surety bond requirement for its class, and a member of responsible management or the designated employee still completes eight hours of Board-approved pre-license education. An applicant without the NASCLA credential takes the Virginia CBC technical examination through PSI instead, and out-of-state experience counts toward eligibility either way. Where the application is for CBC or Commercial Improvement (CIC) only, the Contractor Transaction Recovery Fund assessment is not charged and the application fee drops accordingly.

The NASCLA route is an examination credential, not an agreement with any particular state, so it is open to an applicant arriving from anywhere. Applicants from North Carolina should read the agreement row as well. Virginia's universal license recognition program does not cover the Class A, B or C contractor license; its Board for Contractors recognition forms are for individual credentials such as the tradesman license. Two of the Board's other published arrangements are electrical rather than building ones and do not reach the Commercial Building classification: North Carolina Unlimited and Intermediate electrical contractor licenses paired with the Virginia Class A or Class B electrical contractor business license, and an Ohio entry pairing Ohio's Business and Law examination with Virginia's Advanced and General law examinations, which on the Board's agreements document is the second half of the Ohio master electrician entry. Ohio does not license general or residential building contractors at the state level, so an Ohio building contractor applies to Virginia through the route described above.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 30 days

What you must already have

  • You must have passed a licensing exam in Colorado that the destination considers comparable.The Board's license application states, in the Commercial Building and Commercial Improvement section, that the NASCLA examination is equivalent but the applicant must still provide compatible experience. The NASCLA examination is a single commercial general building trade examination accepted by participating boards in place of their own; it is not a license and does not waive the business examination, application, financial responsibility or pre-license education requirements.
  • The qualified individual must have one year (Class C), three years (Class B) or five years (Class A) of experience in commercial building contracting, documented on the Experience Verification Form; experience earned in another state counts18VAC50-22-40, -50 and -60 set the ladder by license class.
  • Your Colorado license must be active and in good standing.Certification or Letter of Good Standing showing license number, initial date of licensure, expiration date, means of obtaining licensure and all closed disciplinary actions.
  • You must have no disciplinary action or unresolved complaints on your record.

What you'll do to get licensed in Virginia

  1. 1Application fee. Pay the application fee ($414.50). Class A initial license fee for an application requesting Commercial Building (CBC) or Commercial Improvement (CIC) only, which does not pay the Recovery Fund assessment; the equivalent Class B fee is $394.50 and Class C $249.50. Adding any other classification or specialty restores the $25 Contractor Transaction Recovery Fund assessment and makes the fee $439.50 for Class A, $419.50 for Class B and $274.50 for Class C. All amounts include the technology fee of $7.25 per year and are not refundable..
  2. 2Financial responsibility. Show financial responsibility of at least $45,000. Class A applicants must document at least $45,000 of net worth or equity, and Class B applicants at least $15,000, using the Board's Financial Statement Form with supporting documentation, a CPA-reviewed financial statement or a CPA audit. Class C has no financial requirement..
  3. 3Surety bond. Post a surety bond ($50,000) (if applicable). A $50,000 surety bond on the Board's Surety Bond Form may be filed instead of the net worth documentation for a Class A or Class B license..
  4. 4Law / code exam. Pass a law, rules, or code exam. PSI contractor business examination for the designated employee: the Advanced, General and Virginia portions for Class A and the General and Virginia portions for Class B. It is not waived by the NASCLA credential. Class C licenses have no designated employee..
  5. 5Trade exam. Pass the destination's trade exam (if applicable). Virginia Commercial Building (CBC) technical examination through PSI, required only for a qualified individual who does not hold the NASCLA Accredited Examination; the Board must pre-approve the Experience Verification Form first..
  6. 6Exam fee. Pay the exam fee ($72). Paid directly to PSI: the designated employee's business examination is $40 for one portion, $72 for two portions and $85 for three, and a qualified individual specialty examination is $85. Examination fees are set by the Board's vendor contract and may not exceed $200 per element..
  7. 7Other. Eight hours of Board-approved pre-license education, completed by the designated employee or a member of responsible management for Class A and Class B, or by a member of responsible management for Class C..
  8. 8Other. Certification or Letter of Good Standing from each out-of-state board, prepared by that board, if an out-of-state license is being submitted for experience credit or under an examination agreement. (if applicable).
  9. 9Business license. Obtain a business license. Registration of the business entity with the Virginia State Corporation Commission, including out-of-state businesses, plus compliance with the business license requirements of every county, city and town where the firm performs work..
  10. 10Background check. Complete a background check (if applicable). An original criminal history record dated within 90 days is required from each jurisdiction where any person listed on the application has a felony conviction, or a non-marijuana misdemeanor conviction within the last three years..
  11. 11License fee. Pay the license or certificate fee ($300). Class A renewal every two years: the $270 renewal fee in 18VAC50-22-140 plus the $30 Recovery Fund assessment. Class B renewal is $260 and Class C $220, each plus the $30 assessment. Licenses expire two years from the last day of the month in which they were issued..

Published fees on this path total $786.50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $50,000 · if applicable

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam · if applicable

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Other

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Virginia licenses general contractors

Virginia general contractor · “Class A, B or C Contractor, Commercial Building (CBC)

Statewide license

Verified September 17, 2026· 9 sources

Issued by Virginia Board for Contractors (DPOR)

Unlimited and commercial building work in Virginia is a Class A license with the Commercial Building (CBC) classification, issued by the Board for Contractors at DPOR to a business entity rather than to a person. The class letter is purely about money: Class A carries no monetary ceiling and requires $45,000 of documented net worth or equity, Class B is capped at $150,000 per project and $1 million a year and requires $15,000, and Class C is capped at $30,000 per project and $250,000 a year with no financial requirement; a $50,000 surety bond on the Board's form may replace the financial statement for Class A or Class B. The CBC classification covers construction, remodeling, repair, improvement, removal and demolition of commercial, industrial, institutional, governmental and accessory-use buildings, including multi-family housing, and absorbs the commercial improvement, concrete, masonry, roofing, painting, billboard, marine facility, recreational facility and industrialized building specialties for that work; it does not cover electrical, plumbing, HVAC or gas fitting, which are separate classifications, and it does not cover dwellings and townhouses, which are the RBC classification. Heavy civil work is its own Highway/Heavy (H/H) classification. The firm names a qualified individual with five years of commercial building experience for Class A (three for Class B, one for Class C) who passes the CBC technical examination or holds the NASCLA Accredited Examination, and a designated employee who passes the Advanced, General and Virginia portions of the PSI business examination. Eight hours of Board-approved pre-license education are required for every class, and the license runs two years from the last day of the month of issuance.

Moving to VirginiaLeaving Virginia

Why Colorado has nothing to transfer

Colorado general contractor · “General / Building contractor license (Class A or B in most jurisdictions)

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Colorado has no statewide general or commercial building contractor license. DORA licenses electricians and plumbers through its Division of Professions and Occupations but states on its own consumer page that general contractors are not licensed at the state level and that you should check with the city; the Pikes Peak Regional Building Department says the same thing in its exam notice. Unlimited and commercial building work is therefore licensed by each city, county or regional building department, typically as a Class A (unlimited) and Class B (limited commercial or under a height or storey cap) pair: Denver issues General Contractor Class A and Building Contractor Class B, Colorado Springs issues Building Contractor A-1, A-2, B-1 and B-2, Fort Collins issues Classes A, B, C1 and C2, and Aurora issues a single Commercial Building Contractor license. The license is held by the business and qualified by an individual who holds the supervisor certificate and has passed the relevant exam, so the person moving states applies for the certificate and the company applies for the license. The common thread is the ICC National Standard General Building Contractor (A) and Building Contractor (B) examinations, which nearly every Colorado jurisdiction requires, and a license must be obtained separately in each jurisdiction where the contractor will pull permits.

How local licensing works in Colorado

How local licensing works. Each Colorado jurisdiction licenses building contractors under its own ordinance and building code, and there is no state board above them. Class letters and size thresholds differ from place to place, so a Class B in Fort Collins is not a Class B in Colorado Springs. What is consistent is the exam: most jurisdictions require an ICC National Standard contractor examination, open book and multiple choice through Pearson VUE, and the Pikes Peak notice explains why that matters - "with successful passage of an ICC contractor exam, contractors can be secure in the knowledge that their results may be honored by many jurisdictions in Colorado and throughout the United States. However, each jurisdiction has the right to determine if this exam is acceptable." The same exam appears as W11, F11 or G11 for the unlimited (A) tier and W12, F12 or G12 for the limited (B) tier, depending on which code edition the jurisdiction has adopted, and departments generally require results from the current or a recent code year. The notice also warns that "passing an ICC contractor exam is NOT a license to practice and does not guarantee licensing in any jurisdiction."

Denver. The individual first earns a supervisor certificate. Class A covers "to erect, add to, alter, demolish, or repair any building or structure" and needs seven years of notarized commercial experience including ground-up high-rise work over 75 feet plus ICC exam #F11. Class B covers any building classified as less than a high rise and needs four years of notarized commercial experience on ground-up builds of 55 to 75 feet plus ICC exam #F12; Class B-2 caps the highest floor level or occupiable roof at 30 feet, with four years of experience including ground-up projects up to 40 feet, also on ICC #F12. Certificates cost $60 and renew every three years. The company then buys the General Contractor Class A or Building Contractor Class B license at $250 for three years. Denver states it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."

Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). Building Contractor A-1 covers "the construction, alteration and repair of any type or size of structure permitted by the Regional Building Code"; A-2 is the same except Group A, E and I occupancies over 30,000 square feet and any building requiring Type I construction; B-1 covers all occupancies except Groups A, E, I and H and Type I construction; B-2 covers nonstructural remodeling plus Group B, F, M or S buildings up to one storey and 7,500 square feet and Group R buildings up to 16 units and two storeys. License fees are $200 for A-1 and A-2, $175 for B-1 and B-2, on top of a $50 non-refundable application fee, and each of these classes requires an exam. Applicants supply three reference forms documenting experience, copies of all licenses held inside or outside Colorado, liability insurance naming PPRBD, workers' compensation, a Colorado certificate of good standing and a name-based judicial record check. Files close three weeks before the monthly Licensing Committee meeting, the Board of Review approves the following week, and the license must be claimed within 60 days. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."

Aurora. A single Commercial Building Contractor license "Requires ICC General Building Contractor 'A' OR 'B' Certification"; the supervisor license fee is $131 and the license fee is $392, plus registration and three job references. Limited Building Commercial and Demolition contractors register with three years of documented experience instead.

Fort Collins. Class A and A(DR) cover any building or structure; Class B and B(DR) cover new builds up to and including five storeys; Class C1 and C2 cover new builds up to three storeys and multi-family housing projects; E(C) covers nonstructural commercial alterations. Classes A and B require ICC exam G11 over the 2018 IBC plus the concrete manual, and Classes C1, C2 and E(C) require ICC exam G12, with G11 also accepted in place of G12. Every general contractor class also needs three project verifications with permits and final inspection records signed by someone unconnected to the applicant, and general liability of $1,000,000 per person with $2,000,000 per accident, property damage and aggregate. A new license with supervisor certificate is $300 for a two-year term including a $75 non-refundable application fee; renewals are $225. The city adopted the 2024 ICC codes with amendments in December 2025 and requires exam results from a current code year.

Boulder. Class A covers "the construction, alteration, wrecking, or repair of any type or size of building or structure permitted in the City of Boulder" and requires the ICC A Contractors certificate; Class B covers commercial and residential buildings of construction types V, IV, III-B and II-B and requires the ICC B certificate. New Class A and Class B applicants must also document education, training or years of experience in non-residential construction. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only.

Jefferson County. Class A (labeled 2018 G11) covers "the construction, alteration, tenant finish or repair of any type of structure permitted by the Building Code" and Class B (2018 G12) covers commercial buildings and single- or multi-dwelling buildings up to three storeys. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and licenses renew annually.

Arapahoe County. Building Contractor Class A (commercial) and Class B (commercial/residential) each cost $360 and require the matching ICC certification "or equivalent" certification by a recognized state or national certification entity; Class D specialty is $84. Insurance must carry a $2,000,000 general aggregate and $1,000,000 each occurrence, with the county as an additional holder.

Lakewood. Class A-1 Unlimited Commercial is "only issued to contractors with experience in building high-rise construction"; A-2 Limited Commercial is limited to two-storey commercial or four-storey R occupancies; A-4 covers commercial and residential remodeling not exceeding 30 percent of the original structure. A-1 and A-2 applicants attach any ICC certifications they or their employees hold. Fees are $150 for the first probationary year and $400 for each subsequent three-year renewal.

Douglas County. Unincorporated Douglas County registers general contractors rather than licensing them and states that it "has no testing requirements." Registration needs the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; fees are currently waived.

Out-of-state holders. None of the jurisdictions reviewed will convert another state's general contractor license into a Colorado one. Denver and Boulder rule it out in writing, and PPRBD will not accept exam results earned out of state. What does carry across is the ICC National Standard contractor certification: pass the (A) or (B) exam on a code edition the jurisdiction currently accepts and it will usually satisfy the testing requirement in Denver, Colorado Springs, Aurora, Fort Collins, Boulder, Jefferson County and Arapahoe County, though each department still verifies experience, references or project history separately and charges its own fee. Jefferson County goes further and accepts a current license from another ICC participating jurisdiction in place of the exam. Check the required class, exam code year and fee with each building department before applying, and expect to hold a license in every jurisdiction where you pull permits.

Moving to ColoradoLeaving Colorado

Common questions

Do I have to take the Virginia general contractor exam if I'm licensed in Colorado?
The trade exam is waived, but Virginia requires a law or code exam.
What does it cost to get a Virginia general contractor license from Colorado?
Published fees on this path total $786.50, not counting exam vendor fees or bonds.
Do my Colorado work hours count in Virginia?
Yes. Documented out-of-state experience counts toward Virginia's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 30 days.
Does it work the other way, from Virginia to Colorado?
Not necessarily. Reciprocity is directed. Going from Virginia to Colorado, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. 18VAC50-22-100 - Fees · 18VAC50-22-100; Va. Code § 54.1-1119 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  3. 18VAC50-22-110 - Renewal required · 18VAC50-22-110 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  4. 18VAC50-22-140 - Renewal fees · 18VAC50-22-140 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  5. 18VAC50-22-20 - Definitions of license classifications · 18VAC50-22-20 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  6. 18VAC50-22-40 - Requirements for a Class C license · 18VAC50-22-40 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  7. 18VAC50-22-50 - Requirements for a Class B license · 18VAC50-22-50 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  8. 18VAC50-22-60 - Requirements for a Class A license · 18VAC50-22-60 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  9. 18VAC50-22-70 - Qualifications for licensure by reciprocity or substantial equivalency · 18VAC50-22-70 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  10. 18VAC50-22-80 - Examination fees · 18VAC50-22-80 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
  11. Va. Code 54.1-1100 - Definitions (Class A, Class B and Class C contractors) · Va. Code § 54.1-1100 · Virginia General Assembly (LIS) · Statute · verified September 17, 2026
  12. Form A501-27LIC - Contractor Licensing Information and Application Instructions (v18, 08/01/2026) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
  13. Form A501-27EXINFO - Board for Contractors, Requirements for Qualified Individuals (v10, 09/01/2025) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
  14. DPOR Board for Contractors - program page (licensing, education and exams, reciprocal agreements) · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026
  15. Virginia Board for Contractors - Reciprocal Licensing/Examination Agreements with Other Jurisdictions · Virginia Board for Contractors (DPOR) · Agreement Document · verified September 17, 2026
  16. DPOR - Universal License Recognition · Va. Code 54.1-204, 54.1-205 · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related