Colorado to Virginia: residential contractor license reciprocity
Colorado does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Virginia's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state residential builders: experience transfers, the RBC exam does not
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Virginia has no general reciprocity or license-recognition route into the contractor license for residential builders arriving from a state other than North Carolina or Ohio, so the firm applies as a new applicant. What does transfer is experience: the application asks for every contractor license, certification and registration the business, its qualified individual, its designated employee and its responsible management hold outside Virginia, and the Board will review a current out-of-state license as proof of the one, three or five years of residential building experience its class requires. To have it counted, the out-of-state board must supply a Certification or Letter of Good Standing giving the license number, the initial date of licensure, the expiration date, how the license was obtained (examination, reciprocity and so on) and any closed disciplinary actions. The qualified individual still sits the Virginia RBC technical examination with PSI after the Board pre-approves the Experience Verification Form, a Class A or Class B firm's designated employee still sits the business examination, and the eight-hour pre-license education course is still required. The Board's universal license recognition program covers Virginia's individual tradesman and other personal credentials, not the Class A, B or C contractor license, so it is not a route to this license.
The class letter is about contract value, not about houses versus commercial work: a residential builder can hold any of Class A, B or C with the RBC classification, and the fees, net worth and experience figures below change with the class. Virginia also requires the firm to register with the State Corporation Commission and to comply with the local license requirements of every county, city and town where it works. The Board's agreement list also carries an Ohio entry, pairing Ohio's Business and Law examination with Virginia's Advanced and General law examinations, but on the Board's own agreements document that sentence belongs to the Ohio master electrician entry and the arrangement is an electrical one; it does not reach the Class A, B or C building classifications, and Ohio does not license residential or general building contractors at the state level in any case. The Board publishes only the existence of its agreements, not their terms; call (804) 367-8511 or email [email protected] before assuming an out-of-state credential will be accepted.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 30 days
What you must already have
- The qualified individual must have one year (Class C), three years (Class B) or five years (Class A) of experience in residential building contracting; experience earned in another state counts18VAC50-22-40, -50 and -60 set the ladder by license class; the Board pre-approves the Experience Verification Form before the qualified individual may sit the RBC technical examination.
- Your Colorado license must be active and in good standing.Certification or Letter of Good Standing showing license number, initial date of licensure, expiration date, means of obtaining licensure and all closed disciplinary actions.
- You must have no disciplinary action or unresolved complaints on your record.
What you'll do to get licensed in Virginia
- 1Application fee. Pay the application fee ($274.50). Class C initial license fee on the current application form, which combines the $235 fee in 18VAC50-22-100, the $25 Contractor Transaction Recovery Fund assessment and the technology fee of $7.25 per year. The same form charges $419.50 for Class B and $439.50 for Class A. Fees are not refundable..
- 2Financial responsibility. Show financial responsibility of at least $15,000 (if applicable). Class B applicants must document at least $15,000 of net worth or equity and Class A applicants at least $45,000, using the Board's Financial Statement Form with supporting documentation, a CPA-reviewed financial statement or a CPA audit. Class C has no financial requirement..
- 3Surety bond. Post a surety bond ($50,000) (if applicable). A $50,000 surety bond on the Board's Surety Bond Form may be filed instead of the net worth documentation for a Class A or Class B license..
- 4Trade exam. Pass the destination's trade exam. Virginia Residential Building (RBC) technical examination for the qualified individual, administered by PSI after the Board pre-approves the application and Experience Verification Form..
- 5Law / code exam. Pass a law, rules, or code exam. PSI contractor business examination for the designated employee of a Class A or Class B firm: the General and Virginia portions for Class B, and the Advanced, General and Virginia portions for Class A. Class C licenses have no designated employee and no business examination..
- 6Exam fee. Pay the exam fee ($85). Paid directly to PSI: $85 for a qualified individual specialty examination such as RBC, and for the designated employee's business examination $40 for one portion, $72 for two or $85 for three. Examination fees are set by the Board's vendor contract and may not exceed $200 per element..
- 7Other. Eight hours of Board-approved pre-license education, completed by the designated employee or a member of responsible management for Class A and Class B, or by a member of responsible management for Class C. The Board approves the courses but providers set their own prices..
- 8Other. Certification or Letter of Good Standing from each out-of-state board, prepared by that board, if an out-of-state license is being submitted for experience credit or under an examination agreement. (if applicable).
- 9Business license. Obtain a business license. Registration of the business entity with the Virginia State Corporation Commission, including out-of-state businesses, plus compliance with the business license requirements of every county, city and town where the firm performs work..
- 10Background check. Complete a background check (if applicable). An original criminal history record dated within 90 days is required from each jurisdiction where any person listed on the application has a felony conviction, or a non-marijuana misdemeanor conviction within the last three years..
- 11License fee. Pay the license or certificate fee ($250). Class C renewal every two years: the $220 renewal fee in 18VAC50-22-140 plus the $30 Recovery Fund assessment. Class B renewal is $260 and Class A $270, each plus the $30 assessment. Licenses expire two years from the last day of the month in which they were issued..
Published fees on this path total $609.50, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $50,000 · if applicable
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Law / code exam
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Other
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Virginia licenses residential contractors
Virginia residential contractor · “Class A, B or C Contractor, Residential Building (RBC)”
Statewide license
Issued by Virginia Board for Contractors (DPOR)
Virginia licenses contractors through the Board for Contractors at the Department of Professional and Occupational Regulation, and the license is issued to a business entity rather than to a person. Every license carries two separate things: a class (A, B or C) that sets the dollar limit on the work, and one or more classifications or specialty designations that set the type of work. Class C covers a single contract or project over $1,000 but under $30,000 and under $250,000 of work in any 12 months; Class B covers $30,000 to under $150,000 per project and $250,000 to under $1 million a year, and requires $15,000 of documented net worth or equity; Class A has no monetary ceiling and requires $45,000 of net worth or equity. A $50,000 surety bond on the Board's form may be filed instead of the financial statement, and Class C has no financial requirement at all. Homes-only work is the Residential Building (RBC) classification, which covers dwellings and townhouses and their accessory structures and folds in concrete, home improvement, masonry, painting, roofing, landscape and swimming pool work on those properties, but never electrical, plumbing, HVAC or gas fitting and never commercial buildings; smaller repair and remodeling firms may instead take the Home Improvement (HIC) specialty. The firm names a qualified individual for each designation, who must have one year (Class C), three years (Class B) or five years (Class A) of experience in that work and must pass the Board's RBC technical examination, and Class A and Class B firms also name a designated employee who passes the PSI business examination. All classes need eight hours of Board-approved pre-license education, and licenses run two years from the last day of the month of issuance.
Why Colorado has nothing to transfer
Colorado residential contractor · “Residential / Home Builder contractor license (Class C in most jurisdictions)”
Licensed by cities and counties
Colorado issues no statewide residential or home builder contractor license. DORA's consumer page says plainly that general contractors are not licensed at the state level and tells consumers to check with their city, and the Pikes Peak Regional Building Department's exam notice states that "Colorado does NOT have a state license for the building or mechanical trades." Homebuilding is licensed instead by each city, county or regional building department, most of which use a Class C tier for one- and two-family dwellings; Denver calls it Residential Contractor Class C, Colorado Springs calls it Building Contractor C (Home Builder), Fort Collins splits it into Classes D1 and D2, and Aurora calls it Residential Building Contractor. The license is normally issued to the contracting business and is qualified by a named individual who holds the supervisor certificate, so an arriving builder usually applies for the personal certificate first and the company license second. Almost every licensing jurisdiction accepts the same underlying credential - the ICC National Standard Residential Building Contractor (C) examination - which makes the exam, rather than an out-of-state license, the thing that actually travels. A license must be obtained in each jurisdiction where the builder will pull permits, and a few places, such as unincorporated Douglas County, require only registration and no exam at all.
How local licensing works in Colorado
How local licensing works. There is no state contractor board, so each city, county or regional building department writes its own contractor ordinance under its building code. Class letters mean different things in different places, and holding a license in one Colorado jurisdiction does not let you pull permits in the next one. Most jurisdictions build the residential tier around the ICC National Standard Residential Building Contractor (C) examination, which is open book, multiple choice and delivered by Pearson VUE; the same exam appears under different ICC exam IDs (W13, F13, G13) because each jurisdiction adopts a different edition of the building code and requires a current one. Passing an ICC exam is not itself a license - it is a credential you then present to each building department, which also verifies your experience.
Denver. Licensing is two steps. The individual first earns a Residential Contractor Class C supervisor certificate, which covers erecting, adding to, altering or repairing one- and two-family dwellings, U occupancy buildings and attached single-unit dwellings (IRC townhouses). It requires two years of field work as a journeyman carpenter or construction foreman with foundation, framing and roofing experience, documented with notarized letters, plus ICC exam #F13 National Standard Residential Building Contractor C. The certificate costs $60 and renews every three years. The business then applies for the Residential Contractor Class C license, $250 for three years. Denver states that it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."
Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). PPRBD licenses for unincorporated El Paso County, Colorado Springs, Fountain, Manitou Springs, Green Mountain Falls, Monument, Palmer Lake, Calhan and Woodland Park. Building Contractor C (Home Builder) covers one- and two-family dwellings up to three stories plus accessory structures, and R-2 buildings of up to eight units and two stories; the license fee is $150 with a $50 non-refundable application fee. Building Contractor E covers residential accessory structures and interior nonstructural remodeling, $75. Applicants file three reference forms documenting experience, a liability insurance certificate naming PPRBD, a workers' compensation certificate or rejection of coverage, a Colorado certificate of good standing and a name-based judicial record check; the Licensing Committee and Board of Review act on each file. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."
Aurora. Residential Building Contractor "Requires ICC Residential Building Contractor 'C' Certification"; the supervisor license fee is $131 and the license fee is $235, and registration plus three job references are also required. Remodeling contractors register with three years of documented experience instead of taking an exam.
Fort Collins. The residential-only classes are D1 (single-family attached and detached, no more than two dwelling units, townhouses), D2 (detached garages and Group U Division 1 occupancies up to 1,000 sq ft), E(R) nonstructural residential alterations and MM. All of them require ICC exam G13, plus three project verifications, each with the permit and the final inspection or certificate of occupancy, signed by someone unconnected to the applicant's company. General liability of $1,000,000 per person and $2,000,000 per accident and aggregate is required. A new license with supervisor certificate is $300 for two years, including a $75 non-refundable application fee.
Boulder. Class C covers construction, alteration, wrecking or repair of any detached one- and two-family dwelling or townhome and requires the ICC C Contractors certificate. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only. Fee amounts are published in Boulder's contractor license application and schedule of fees.
Jefferson County. For unincorporated Jefferson County, a Class C license (labeled 2018 G13) covers one- and two-family dwellings and accessory buildings. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and the license renews annually.
Arapahoe County. Building Contractor Class C (residential) costs $180 and requires an ICC Class "C" certification or an equivalent certification from a recognized state or national certification entity. General liability of $1,000,000 per occurrence and $2,000,000 aggregate must name the county.
Lakewood. Contractors register with Public Works; class A-3 Residential covers new construction and remodeling. The registration page does not impose an exam on general contractors but asks A-1 and A-2 applicants to attach any ICC certifications held. The fee is $150 for the first probationary year and $400 for each subsequent three-year renewal.
Douglas County. Unincorporated Douglas County requires registration rather than a license and states that it "has no testing requirements." Registrants file the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; registration fees are currently waived and applications are processed in about two business days.
Out-of-state holders. No Colorado jurisdiction reviewed grants a residential contractor license on the strength of another state's license. Denver and Boulder say so expressly, and PPRBD will not accept out-of-state exam results. The practical route is to pass the ICC National Standard Residential Building Contractor (C) exam on a code edition the jurisdiction currently accepts, gather documented project experience and references, and then apply separately in each city or county where you intend to build. Jefferson County is the clearest exception: it will take a current license from another ICC participating jurisdiction in place of the exam. Confirm the class, exam code year and fee with the building department before applying, because these change independently in every jurisdiction.
- Denver (Community Planning and Development)
- Colorado Springs / El Paso County (Pikes Peak Regional Building Department)
- Aurora (Building Division)
- Fort Collins (Planning and Development Services)
- Lakewood (Public Works)
- Boulder
- Jefferson County (Division of Building Safety)
- Arapahoe County (Building Division)
- Douglas County (Building Division)
Common questions
- Do I have to take the Virginia residential contractor exam if I'm licensed in Colorado?
- Yes. Virginia requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Virginia residential contractor license from Colorado?
- Published fees on this path total $609.50, not counting exam vendor fees or bonds.
- Do my Colorado work hours count in Virginia?
- Yes. Documented out-of-state experience counts toward Virginia's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 30 days.
- Does it work the other way, from Virginia to Colorado?
- Not necessarily. Reciprocity is directed. Going from Virginia to Colorado, the mechanism is not applicable.
Sources
- 18VAC50-22-100 - Fees · 18VAC50-22-100; Va. Code § 54.1-1119 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-110 - Renewal required · 18VAC50-22-110 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-140 - Renewal fees · 18VAC50-22-140 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-20 - Definitions of license classifications · 18VAC50-22-20 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-30 - Definitions of specialty services · 18VAC50-22-30 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-40 - Requirements for a Class C license · 18VAC50-22-40 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-50 - Requirements for a Class B license · 18VAC50-22-50 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-60 - Requirements for a Class A license · 18VAC50-22-60 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-70 - Qualifications for licensure by reciprocity or substantial equivalency · 18VAC50-22-70 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- 18VAC50-22-80 - Examination fees · 18VAC50-22-80 · Virginia Board for Contractors / Virginia Register · Admin Rule · verified September 17, 2026
- Va. Code 54.1-1100 - Definitions (Class A, Class B and Class C contractors) · Va. Code § 54.1-1100 · Virginia General Assembly (LIS) · Statute · verified September 17, 2026
- Form A501-27LIC - Contractor Licensing Information and Application Instructions (v18, 08/01/2026) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
- Form A501-27EXINFO - Board for Contractors, Requirements for Qualified Individuals (v10, 09/01/2025) · Virginia Board for Contractors (DPOR) · Form · verified September 17, 2026
- DPOR Board for Contractors - program page (licensing, education and exams, reciprocal agreements) · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026
- Virginia Board for Contractors - Reciprocal Licensing/Examination Agreements with Other Jurisdictions · Virginia Board for Contractors (DPOR) · Agreement Document · verified September 17, 2026
- DPOR - Universal License Recognition · Va. Code 54.1-204, 54.1-205 · Virginia Department of Professional and Occupational Regulation · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.