LicensebyState

Illinois to Alabama: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 8 sources

Illinois does not issue a statewide general contractor license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Prime contractor license, including the NASCLA Accredited Examination route (states without a reciprocity agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Alabama uses the NASCLA Accredited Examination for Commercial General Building Contractors as its own trade examination for the Building Construction (Commercial) classification: the Board's official PSI candidate bulletin states that for that examination PSI administers the NASCLA Accredited Examination, and prints the NASCLA content outline (115 questions, 330 minutes, 81 to pass, open book) as the Alabama commercial building trade exam. A contractor who already holds the NASCLA credential can release the transcript from NASCLA's National Examination Database instead of sitting the trade exam again; a contractor without it sits it through PSI like anyone else, and other classifications each have their own Alabama PSI trade exam. Nothing else is waived. Every applicant must pass the Alabama Business and Law examination, file the $300 prime application with a Qualifying Party Form, show a minimum net worth and working capital of $10,000 in an accountant-prepared financial statement, file proof of general liability insurance, register the entity with the Alabama Secretary of State, supply three commercial or industrial work references for each classification requested plus an organizational chart, and prove citizenship or lawful presence. The application must be complete and on file 30 days before one of the Board's quarterly meetings, and no one may book an examination until it is.

The trade examination is shown as waivable because Alabama's own commercial building trade exam is the NASCLA Accredited Examination; an applicant who has not passed it, or who wants a classification other than Building Construction (Commercial), still sits the relevant PSI trade examination, which is why it stays on the requirements list. Out-of-state experience is not converted into hours or years, because the Board sets no hour requirement; it counts through the work-experience section and the three reference forms, which the Board reviews to decide which classifications to grant. The Board does not publish a processing time or a bid-limit dollar table; ask the Board at (334) 272-5030. Licenses renew annually in a month set by the first letter of the company name, at $200 for a prime license and $100 for a subcontractor license, and a license left unrenewed for a year past its expiration date means a new application and retaking both the trade and business and law examinations. Amending a license to add a classification also requires that classification's trade examination.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in Illinois that the destination considers comparable.The NASCLA Accredited Examination for Commercial General Building Contractors is the examination Alabama itself uses for the Building Construction (Commercial) classification: the Board's PSI candidate bulletin says that for the Building Construction Examination (Commercial), PSI administers the NASCLA Accredited Examination, and prints its content outline as the Alabama exam. Candidates who have already passed it can send their transcript from NASCLA's National Examination Database at https://ned.nascla.org rather than repeating the exam. It is an examination credential and not a license: it waives no fee, no financial statement, no insurance, no reference and never the Alabama Business and Law examination. Because the Board does not publish a NASCLA policy statement of its own, confirm with the Board at (334) 272-5030 that a transcript will be accepted for the classification you want before relying on it.
  • Documented commercial or industrial work experience in each classification requested, evidenced by three completed projects and three reference forms. The Board sets no minimum number of years or hours.

What you'll do to get licensed in Alabama

  1. 1Law / code exam. Pass a law, rules, or code exam. Alabama Business and Law examination (formerly the General Contractor examination) through PSI: 50 questions, 120 minutes, 70% to pass, open book against the NASCLA Contractors Guide to Business Law and Project Management, Alabama General edition. It is required of all general contractors and the Board says it is never waived, including on reciprocity..
  2. 2Trade exam. Pass the destination's trade exam. One PSI trade examination for each classification requested. For Building Construction (Commercial), PSI administers the NASCLA Accredited Examination for Commercial General Building Contractors as the Alabama trade exam: 115 questions, 330 minutes, 81 to pass, open book. An applicant who has already passed the NASCLA Accredited Examination elsewhere can release the transcript from NASCLA's National Examination Database rather than sitting it again. Other classifications have their own Alabama PSI trade examinations, and a complete application must be on file before anyone may register to test..
  3. 3Exam fee. Pay the exam fee ($96). $96 for each PSI examination, rising to $106 for AL Building Construction (Commercial), AL Highways and Streets Contractor, AL Municipal and Utility Contractor and AL Heavy Railroad Construction. Paid to PSI when the examination is booked, after the Board determines eligibility..
  4. 4Application fee. Pay the application fee ($300). Prime contractor application fee of $300, paid by cashier's check or money order only; personal and company checks are returned and Alabama law does not allow refunds. A subcontractor application is $150. The fee gives the applicant one year from the date the Board receives it to complete the requirements..
  5. 5Financial responsibility. Show financial responsibility of at least $10,000. Minimum net worth and working capital of $10,000, shown in an audited, reviewed or compiled financial statement prepared under generally accepted accounting principles by a CPA or a licensed public accountant approved by the Board, dated no more than one year before submission. The Alabama Department of Transportation booklet is also accepted. Cash-basis and tax-basis statements are not accepted and deficits are not accepted. The figures submitted set the license's bid limit; a bank line of credit can raise working capital to the level of net worth, and a personal or parent-company statement plus the Board's Guaranty Agreement can raise the bid limit one step. The Board does not publish the dollar table that converts financial figures into bid limits..
  6. 6Insurance. Carry the required insurance. Proof of current general liability insurance filed with the application, in the exact name of the applicant, showing the Alabama Licensing Board for General Contractors at 445 Dexter Ave, Suite 3060, Montgomery, AL 36104 as certificate holder..
  7. 7Business license. Obtain a business license. The license is issued to a legal entity, so every entity, Alabama or out-of-state, must be registered with the Alabama Secretary of State before the license issues, and a dated print screen of the Entity Details record goes in the application. Individuals and general partnerships are exempt from this step. The state and county privilege license is a separate obligation from the Board's license..
  8. 8Other. Qualifying Party Form for each named qualifier, three work or job reference forms from three separate licensed general contractors, registered architects, registered professional engineers or Board-qualified persons covering commercial or industrial projects in each classification requested, a Principal Individual Questionnaire for anyone whose experience is being counted, an organizational chart for the applicant entity, a notarized affidavit, and proof of United States citizenship or lawful presence..

Published fees on this path total $396, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam
  • Exam fee · $96

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Alabama licenses general contractors

Alabama general contractor · “General Contractor (Prime) license, by major classification such as Building Construction (BC)

Statewide license

Verified September 17, 2026· 5 sources

Issued by Alabama Licensing Board for General Contractors

Alabama licenses commercial and public general contracting statewide through the Alabama Licensing Board for General Contractors in Montgomery; residential homebuilding is licensed separately by the Home Builders Licensure Board. A license is required for any undertaking, including labor and materials, costing $100,000 or more, and for swimming pool construction of $5,000 or more; subcontractors working under a licensed prime at or above those figures must also be licensed, and an awarding authority must confirm licensure before accepting a bid. The license belongs to the business rather than the person: it is issued to an individual, partnership, corporation, LLC or LLP and is qualified by a named qualifying party on the Board's Qualifying Party Form, so an inbound contractor applies as or for the entity that will sign contracts. Licenses are granted by classification, with major classifications including Building Construction, Building Construction Under Four Stories, Highways and Streets, Municipal and Utility, Heavy and Railroad, Mechanical and Electrical, each with named subclassifications, and at least three completed projects must be documented for every classification requested. Every license also carries a bid limit set by the financial statement the applicant files rather than by skill. The Board names five states whose licensees may have the trade examination waived; the business law examination is never waived.

Moving to AlabamaLeaving Alabama

Why Illinois has nothing to transfer

Illinois general contractor · “No statewide license; local titles include Chicago General Contractor Class A, B or C

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Illinois has no statewide general, commercial or building contractor license and no state board that examines or qualifies builders, so an out-of-state general contractor license has nothing at the state level to transfer into. The State does license pieces of the work: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, in a limited tier for residential buildings of eight units or less and an unlimited tier for residential, commercial and industrial roofs, and also licenses architects, professional and structural engineers, land surveyors and alarm contractors, while the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors and separate state programs cover elevator and fire sprinkler contractors. Commercial building itself is controlled by home rule municipalities through the building permit, and the City of Chicago's General Contractor license, graded Class A through E by project value, is by far the most consequential credential in the state. A general contractor arriving in Illinois gets licensed or registered in each jurisdiction where they will pull permits, carries the insurance and bonds those jurisdictions require, and makes sure the roofing, plumbing, electrical and mechanical scopes are performed under the correct state or municipal trade licenses.

How local licensing works in Illinois

How it works in Illinois. No Illinois agency issues a general, commercial, building or unlimited contractor license, and there is no Illinois qualifying party or state business-and-law exam for general building work. Home rule municipalities control commercial construction through the permit, and each one writes its own contractor ordinance, so a contractor is licensed or registered separately in every jurisdiction where they build. Where a city does license, the credential is generally based on insurance, financial solvency, entity documents and a fee rather than on a competence exam, and none of the programs reviewed recognizes a general contractor license issued by another state. What genuinely travels into Illinois is a state trade license: roofing under 225 ILCS 335, plumbing under the Department of Public Health, and the state elevator, fire sprinkler and alarm credentials, all of which cities check before they issue a permit.

Chicago. Chicago's General Contractor license is the one credential that shapes commercial work in Illinois. It is required to bid on, undertake, hire or supervise, or control the means and methods of any 'regulated activity' - work requiring a building, sign or demolition (wrecking) permit, a sewer permit, a Department of Public Health permit for sandblasting, grinding or chemical washing, work exempt from permit under Section 402 of the Chicago Construction Codes Administrative Provisions, or work under a stormwater management plan. Licenses go to businesses, including sole proprietorships, in five classes graded by project value, defined as 'the fair market value of materials and labor provided by all contractors and subcontractors as part of all concurrent and consecutive regulated activities at the same site': Class A unlimited value, ordinary or complex demolition, $5 million per occurrence of insurance, $3,500.00; Class B up to $20 million, ordinary or complex demolition, $3 million, $1,800.00; Class C up to $10 million, ordinary demolition, $2 million, $1,300.00; Class D up to $4 million, ordinary demolition, $2 million, $900.00; Class E up to $500,000, no demolition, $1 million, $300.00. The Class B, C and D project limits and the Class C and D insurance figures took effect January 1, 2026, and for Class C and D licenses issued before that date the higher insurance requirement is enforced when the policy on file expires. Commercial general liability must come from an insurer authorized in Illinois and rated B+ or higher by A.M. Best, covering bodily injury, personal injury, property damage and completed operations, with primary plus excess or umbrella policies allowed above $1 million; the full requirements are in Section 4-36-090 of the Municipal Code. The application also needs a statement of financial solvency on the supplied form, proof of authority to do business in Illinois, an Assumed Name Certificate where a trade name is used, and government photo identification for the controlling persons. There is no exam, no experience review and no qualifying party. Continental Testing Services handles applications and renewals by mail for the Department of Buildings; the license is valid one year and is automatically inactivated if the insurance policy lapses. A licensed general contractor's own employees and subcontractors under its supervision and control do not need their own general contractor license, but electrical, plumbing, mason, drain layer, elevator mechanic and board-up work must be done by the holders of those separate City licenses, and anyone contracting directly with the owner needs their own license and must be listed on the permit.

Cook County (unincorporated areas). Every contractor working in unincorporated Cook County registers with the Department of Building and Zoning: $150 per trade to start and $75 per trade annually by December 31, with $1,000,000 general liability naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder. The owner or a corporate officer files, with the Articles of Incorporation or current Annual Domestic Report. Roofing registrants file the State of Illinois roofing license and demolition registrants a fully approved bond. No exam. Check the site against the county's CookViewer tool first, because much of suburban Cook County is incorporated and licensed by its own village.

Aurora. A General contractor registration costs $200 and consists of the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, statutory workers' compensation, and Secretary of State registration or a county DBA certificate. Aurora tests only electrical and mechanical contractors, accepting ICC certifications or licenses from named municipalities in place of its own exam; the General category has no test. Elevator, fire suppression, roofing and sign registrations are also $200, and a dumpster or right-of-way obstruction registration needs a $5,000 surety bond. Delinquent permits will block a renewal.

Evanston. General Contractor registration is $150 a year, renewable through the Citizen Portal, with general liability of at least $300,000 per occurrence, bodily injury and property damage of at least $100,000 per occurrence each, and workers' compensation at statutory minimums naming Evanston as certificate holder. Right-of-way work requires $1,000,000 per occurrence with the city as an additional insured. State-regulated contractors submit a copy of the state license. Trade registration is $125.

Joliet. Registration is required before any permit is issued but costs nothing: 'there are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' The requirement is a certificate of insurance naming the City of Joliet, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence. Trade credentials are checked separately: the Illinois State Roofer's License for roofing, the Illinois Plumbing Contractor Registration for plumbing, the State of Illinois elevator license, the Illinois sprinkler (FSC) and private alarm licenses, and a municipal electrical or HVAC license from Joliet's accepted list. Concrete work in the right-of-way needs a $10,000 street obstruction bond and demolition a $50,000 wrecking bond. Electrical, plumbing and HVAC contractors file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford controls commercial work through the permit only, and enforces the State roofing license: 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.'

Springfield. The Building and Zoning Department publishes electrical and mechanical contractor license and registration applications and no general contractor registration at all; its building permit application asks for the general contractor's name and address but for a license number only on the roofing line. Building and Zoning, 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria licenses electrical and HVAC contractors individually at $150.00 each, on an open-book ICC exam or a Normal or Pekin license, plus boiler tenders and stationary engineers. Its four Contractor Business Licenses cover parking lot paving, sidewalks and driveways, right-of-way dumpsters and sewer connections, at $25.00 or $60.00 a year with $5,000 or $10,000 license and permit bonds. There is no general building contractor license.

Everywhere else. Every other Illinois city, village and county sets its own rules; many suburban villages register contractors and charge an annual fee, while others require only a permit and proof of insurance. Confirm the requirement, the current fee and the insurance limits with each building department before you bid work there.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Alabama general contractor exam if I'm licensed in Illinois?
The trade exam is waived, but Alabama requires a law or code exam.
What does it cost to get a Alabama general contractor license from Illinois?
Published fees on this path total $396, not counting exam vendor fees or bonds.
Do my Illinois work hours count in Alabama?
Yes. Documented out-of-state experience counts toward Alabama's eligibility requirements.
Does it work the other way, from Alabama to Illinois?
Not necessarily. Reciprocity is directed. Going from Alabama to Illinois, the mechanism is not applicable.

Sources

  1. Alabama Licensing Board for General Contractors - How to Apply for a License (fees, reciprocity, references) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  2. Alabama Licensing Board for General Contractors - Contractor Licensing Law (definition and thresholds) · Ala. Code §§ 34-8-1, 34-8-2, 34-8-7, 34-8-8, 34-8-9 · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  3. Prime Contractor Application and Instructions - Alabama Licensing Board for General Contractors (rev. 02/2022) · Ala. Admin. Code r. 230-X-1-.33; Ala. Code § 34-8-2(b) · Alabama Licensing Board for General Contractors · Form · verified September 17, 2026
  4. State of Alabama General Contractors - Candidate Information Bulletin (PSI, updated 1/23/26) · PSI Services LLC for the Alabama Licensing Board for General Contractors · Other · verified September 17, 2026
  5. Alabama Licensing Board for General Contractors - Reciprocity (reciprocal states and exam waiver) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  6. Alabama Licensing Board for General Contractors - Renewal Information (staggered renewal months and fees) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  7. Alabama Licensing Board for General Contractors - Testing (PSI bulletin and trade exam requirement) · Ala. Admin. Code r. 230-X-1-.27, 230-X-1-.34 · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  8. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related